Asalamualaikum Atif, i saw your guy's ad in spider magazine. sounds cool... yeah, i got asterisk to work, i had to build zaptel before asterisk. just trying to transfer from one line to another now... thanks Imran Atif Rasheed wrote: well Imran, I am not a guru of Asterisk, but I think my suggestions might work,Hi, I've been trying to get my zaptel x100p cards working for the past week now. this is what I've done:first, this should have been done with Zaptel, not asterisk install Zaptel, like this: make clean make linux26 (if kernel version is 2.6 or above, else do 'make' only) make installinstalled asterisk: make clean make linux 26 (for fedora core 2) make installand, this should have been done for Asterisk i.e. install Asterisk, like: make clean make make installinstalled zaptel: make clean make make installthen do 'modprobe's', 'ztcfg -vvvvv', and then do 'asterisk -vvvvvvvvvvc' then check for errors, if anydid a modprobe zaptel, and wcfxo got this in /var/log/messages: PCI: found IRQ 11 for device 0000:00:0f.0 wcfxo: daa mode is 'FCC' found a wildcard fxo: wildcard x101p ... in zaptel.conf: fxsks=1-2 in zapata.conf: signalling = fxs_ks channel => 1 channel => 2 yet when i run asterisk, the zap show channels command doesn't work. in a previous thread they mentioned this is because some chan_zap.so file isn't loaded because of the zaptel installation. I was told I had to REINSTALL asterisk after the zaptel stuff, which again didn't do anything. How can this be so hard to even get installed? Thanks, Imranhope, it will work this time. |
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users