Re: [Asterisk-Users] TDM card loses Dial tone
I have a cordless phone that causes this same thing to happen every time I plug it into a digium fxs port. I have an old style tdm card and a new one, same results with both. Don't know what it is about the phone that makes this happen; It works fine plugged into a pots line. The phone is a uniden 900mhz dss. -Jeff On Sat, 14 Feb 2004 14:49:49 -0500 Ulexus [EMAIL PROTECTED] wrote: Same here. I, too have received replacement cards from Digium, and I have even tried replacing the proSLICs, all to no avail. Also to note: the same port on each (of three) cards always goes out first. On Thursday, 12 February, 2004 19:22, John Vozza wrote: Same here... Usually after several of these show up in my system log: Power alarm on module 1, resetting! Need to unload/reload module wcfxs in order to get the dial tone back. Happens several times a week, sometimes more frequently. John - NetRom Internet Services973-208-1339 voice [EMAIL PROTECTED] 973-208-0942 fax http://www.netrom.com - On Thu, 12 Feb 2004, Youness El Andaloussi wrote: I experienced similar problems too with a 4 chan tdm400. This seems to especially happen when you make configuration changes. It has nothing to do with runing X or no, it does not even have to do with redhat... I experienced the same problem on mandrake. One thing you have to be extra careful is when restarting, make sure that all the modules have entirely reloaded before expecting a dialtone with an asterisk debug console asterisk -r... many of the times I thought there was no dialtone and the asterisk process had gone cukoo, I noticed that configuration was not entirely reload. Yet, reloading many times seems to get some of the TDM400 channels hung. On the other hand, this problem does not seem to happen as extensively when no reloads are made ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TDM card loses Dial tone
Same here. I, too have received replacement cards from Digium, and I have even tried replacing the proSLICs, all to no avail. Also to note: the same port on each (of three) cards always goes out first. On Thursday, 12 February, 2004 19:22, John Vozza wrote: Same here... Usually after several of these show up in my system log: Power alarm on module 1, resetting! Need to unload/reload module wcfxs in order to get the dial tone back. Happens several times a week, sometimes more frequently. John - NetRom Internet Services 973-208-1339 voice [EMAIL PROTECTED] 973-208-0942 fax http://www.netrom.com - On Thu, 12 Feb 2004, Youness El Andaloussi wrote: I experienced similar problems too with a 4 chan tdm400. This seems to especially happen when you make configuration changes. It has nothing to do with runing X or no, it does not even have to do with redhat... I experienced the same problem on mandrake. One thing you have to be extra careful is when restarting, make sure that all the modules have entirely reloaded before expecting a dialtone with an asterisk debug console asterisk -r... many of the times I thought there was no dialtone and the asterisk process had gone cukoo, I noticed that configuration was not entirely reload. Yet, reloading many times seems to get some of the TDM400 channels hung. On the other hand, this problem does not seem to happen as extensively when no reloads are made ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TDM card loses Dial tone
Same here... Usually after several of these show up in my system log: Power alarm on module 1, resetting! Need to unload/reload module wcfxs in order to get the dial tone back. Happens several times a week, sometimes more frequently. John - NetRom Internet Services973-208-1339 voice [EMAIL PROTECTED] 973-208-0942 fax http://www.netrom.com - On Thu, 12 Feb 2004, Youness El Andaloussi wrote: I experienced similar problems too with a 4 chan tdm400. This seems to especially happen when you make configuration changes. It has nothing to do with runing X or no, it does not even have to do with redhat... I experienced the same problem on mandrake. One thing you have to be extra careful is when restarting, make sure that all the modules have entirely reloaded before expecting a dialtone with an asterisk debug console asterisk -r... many of the times I thought there was no dialtone and the asterisk process had gone cukoo, I noticed that configuration was not entirely reload. Yet, reloading many times seems to get some of the TDM400 channels hung. On the other hand, this problem does not seem to happen as extensively when no reloads are made ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] TDM card loses Dial tone
Hi, I have a redhat 9 asterisk server with tdm400p three ports, and a x100p installed at home. I am not running X or framebuffers. Every so often like once a month, I lose dial tone on my channels. Asterisk still responds at the cli. I dont see any log entries pertaining to this. If I restart asterisk it does not change. I have to reboot the computer, which I would think would be a hardware problem, or an OS issue. I cant seem to make it happen when I want so troubleshooting is an issue. The irqs are ok as seen below. I am not doing smp, or multithreading as some posts would reveal that as a problem. These are brand new cards from Digium. The tdm is a new card with the power connected. I tested the power supply and it is supplied the correct voltages. CPU0 0: 9298672 XT-PIC timer 1: 4 XT-PIC keyboard 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 9: 251135 XT-PIC usb-uhci, eth0 10: 92378687 XT-PIC wcfxs 11: 92395359 XT-PIC wcfxo 12: 20 XT-PIC PS/2 Mouse 14: 75560 XT-PIC ide0 15: 0 XT-PIC ide1 NMI: 0 ERR: 0 Please respond if someone is aware of these types of problems. Thanks in advance, Bob
Re: [Asterisk-Users] TDM card loses Dial tone
I have had similar issues with mine TDM400 w/4 modules. I get both no dial tone and sometime a large level of static on the port and although sometimes manually unloading and reloading the drivers will correct the problem most of the time I have to reboot the system. Also, do you get messages like below in your messages log? Feb 10 10:16:07 localhost kernel: Ouch, part reset, quickly restoring reality (2)Feb 10 10:16:07 localhost kernel: Ouch, part reset, quickly restoring reality (3)Feb 10 10:16:07 localhost kernel: Power alarm on module 1, resetting!Feb 10 10:16:07 localhost kernel: Power alarm on module 2, resetting! Digium has replace my card once and I have seen the same results in to different Computers. They have verified my zap.conf and zapata.conf configurations and I am now having to reboot my machine every night via crontab to keep the system running effectively. So, far for about a week the reboot once a day has keep it running with out incident but I don't no if the usage increase on the TDM400 if would start failing btw reboots. Sorry no answer but it seems we may be having similar problems. - Original Message - From: Bob Bevins To: [EMAIL PROTECTED] Sent: Wednesday, February 11, 2004 12:24 PM Subject: [Asterisk-Users] TDM card loses Dial tone Hi, I have a redhat 9 asterisk server with tdm400p three ports, and a x100p installed at home. I am not running X or framebuffers. Every so often like once a month, I lose dial tone on my channels. Asterisk still responds at the cli. I dont see any log entries pertaining to this. If I restart asterisk it does not change. I have to reboot the computer, which I would think would be a hardware problem, or an OS issue. I cant seem to make it happen when I want so troubleshooting is an issue. The irqs are ok as seen below. I am not doing smp, or multithreading as some posts would reveal that as a problem. These are brand new cards from Digium. The tdm is a new card with the power connected. I tested the power supply and it is supplied the correct voltages. CPU0 0: 9298672 XT-PIC timer 1: 4 XT-PIC keyboard 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 9: 251135 XT-PIC usb-uhci, eth0 10: 92378687 XT-PIC wcfxs 11: 92395359 XT-PIC wcfxo 12: 20 XT-PIC PS/2 Mouse 14: 75560 XT-PIC ide0 15: 0 XT-PIC ide1 NMI: 0 ERR: 0 Please respond if someone is aware of these types of problems. Thanks in advance, Bob
Re: [Asterisk-Users] TDM card loses Dial tone
I am have the exact same issue. I have/had a problem where the TDM400P turns to static and stops responding to Asterisk. I also notice the "Ouch, part reset. Quickly restoring reality." error messages in the log and CLI console. I originally thought it was an IRQ sharing issue and/or powersupply.. but everything is OK in those respects. CPU0 0: 6900712 XT-PIC timer 1: 244 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 68954455 XT-PIC wcfxo 7: 68951573 XT-PIC wcfxs 8: 1 XT-PIC rtc 10: 62575 XT-PIC eth1 11: 73783 XT-PIC ide2, ide3, eth0 12: 566 XT-PIC PS/2 Mouse 14: 102 XT-PIC ide0 15: 61 XT-PIC ide1 NMI: 0 ERR: 0 I have not contacted Digium yet. I have received some help from the nice guys on IRC. After some IRQ re-arrangements yesterday there has been no problem. I hope it continues to work properly. Glenn Dalgliesh wrote: I have had similar issues with mine TDM400 w/4 modules. I get both no dial tone and sometime a large level of static on the port and although sometimes manually unloading and reloading the drivers will correct the problem most of the time I have to reboot the system. Also, do you get messages like below in your messages log? Feb 10 10:16:07 localhost kernel: Ouch, part reset, quickly restoring reality (2) Feb 10 10:16:07 localhost kernel: Ouch, part reset, quickly restoring reality (3) Feb 10 10:16:07 localhost kernel: Power alarm on module 1, resetting! Feb 10 10:16:07 localhost kernel: Power alarm on module 2, resetting! Digium has replace my card once and I have seen the same results in to different Computers. They have verified my zap.conf and zapata.conf configurations and I am now having to reboot my machine every night via crontab to keep the system running effectively. So, far for about a week the reboot once a day has keep it running with out incident but I don't no if the usage increase on the TDM400 if would start failing btw reboots. Sorry no answer but it seems we may be having similar problems. - Original Message - From: Bob Bevins To: [EMAIL PROTECTED] Sent: Wednesday, February 11, 2004 12:24 PM Subject: [Asterisk-Users] TDM card loses Dial tone Hi, I have a redhat 9 asterisk server with tdm400p three ports, and a x100p installed at home. I am not running X or framebuffers. Every so often like once a month, I lose dial tone on my channels. Asterisk still responds at the cli. I dont see any log entries pertaining to this. If I restart asterisk it does not change. I have to reboot the computer, which I would think would be a hardware problem, or an OS issue. I cant seem to make it happen when I want so troubleshooting is an issue. The irqs are ok as seen below. I am not doing smp, or multithreading as some posts would reveal that as a problem. These are brand new cards from Digium. The tdm is a new card with the power connected. I tested the power supply and it is supplied the correct voltages. CPU0 0: 9298672 XT-PIC timer 1: 4 XT-PIC keyboard 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 9: 251135 XT-PIC usb-uhci, eth0 10: 92378687 XT-PIC wcfxs 11: 92395359 XT-PIC wcfxo 12: 20 XT-PIC PS/2 Mouse 14: 75560 XT-PIC ide0 15: 0 XT-PIC ide1 NMI: 0 ERR: 0 Please respond if someone is aware of these types of problems. Thanks in advance, Bob
