Re: [Asterisk-Users] TDM400 FXO module not answering or dialing out.
Hi Mike, may I ask where you purchsded your A200 card from? I managed to get one of the pre-production cards from Sangoma back in November, however there are some bugs with it and I am unable to flash the firmware or run latest drivers with it. Sure, I got it at: http://www.telephonyware.com/telephonyware/tw00274.html So far I've done only basic tests. I haven't tried flashing any firmware, or the hardware echo canceller. However, I am using the latest drivers, and calls seem to go through just fine. I was impressed that they supplied both a full-height and half-height card mounting bracket. I ended up using the optional half-height bracket in my server, for space reasons. Beware that the card is quite "thick", so it can be tricky to install in 1U servers! The installation procedure is pretty well documented at http://sangoma.editme.com. I had to hack my init scripts to make things start gracefully, but that's not a big deal. - Mike ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TDM400 FXO module not answering or dialing out.
On 3/22/06, Dr. Michael J. Chudobiak <[EMAIL PROTECTED]> wrote: > Hadley Rich wrote: > > Hi all, > > > > I have hit a wall configuring a TDM400, I have set these up before without > > issue but today I just can't seem to figure out what I am doing wrong. > > > I couldn't make TDM400/FXO work on my 1.2.5 Asterisk either. It wouldn't > answer calls, for unknown reasons. I gave up and replaced it with a > Sangoma A200 card, which works just fine. > > - Mike Hi Mike, may I ask where you purchsded your A200 card from? I managed to get one of the pre-production cards from Sangoma back in November, however there are some bugs with it and I am unable to flash the firmware or run latest drivers with it. Thanks Mike > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TDM400 FXO module not answering or dialing out.
On Thursday 23 March 2006 02:08, Dr. Michael J. Chudobiak wrote: > > I have hit a wall configuring a TDM400, I have set these up before > > without issue but today I just can't seem to figure out what I am doing > > wrong. > > I couldn't make TDM400/FXO work on my 1.2.5 Asterisk either. It wouldn't > answer calls, for unknown reasons. Is anyone else having this problem or am I just going mad? FWIW I just tried an old X100P on the line and it works correctly. I don't think I am doing anything wrong in my configuration. Cheers, hads -- Madison's Inquiry: If you have to travel on the Titanic, why not go first class? ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TDM400 FXO module not answering or dialing out.
Hadley Rich wrote: Hi all, I have hit a wall configuring a TDM400, I have set these up before without issue but today I just can't seem to figure out what I am doing wrong. I couldn't make TDM400/FXO work on my 1.2.5 Asterisk either. It wouldn't answer calls, for unknown reasons. I gave up and replaced it with a Sangoma A200 card, which works just fine. - Mike ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TDM400 FXO module not answering or dialing out.
On Wednesday 22 March 2006 16:24, Hadley Rich wrote:
> I have hit a wall configuring a TDM400, I have set these up before without
> issue but today I just can't seem to figure out what I am doing wrong.
>
> On an incoming call the following is produced in the Asterisk console with
> verbose 4
>
> -- Starting simple switch on 'Zap/2-1'
> Mar 22 16:12:34 NOTICE[2051]: chan_zap.c:6063 ss_thread: Got event 18 (Ring
> Begin)...
> Mar 22 16:12:34 NOTICE[2051]: chan_zap.c:6063 ss_thread: Got event 2
> (Ring/Answered)...
> Mar 22 16:12:37 NOTICE[2051]: chan_zap.c:6063 ss_thread: Got event 18 (Ring
> Begin)...
> -- Executing Answer("Zap/2-1", "") in new stack
> -- Executing Wait("Zap/2-1", "15") in new stack
> Mar 22 16:12:37 WARNING[2051]: chan_zap.c:3926 zt_handle_event:
> Ring/Off-hook in strange state 6 on channel 2
> Mar 22 16:12:38 WARNING[2051]: chan_zap.c:3926 zt_handle_event:
> Ring/Off-hook in strange state 6 on channel 2
>
> Asterisk doesn't answer the line. For debugging I have a POTS phone plugged
> into the line as well as the FXO and this phone continues to ring. The
> Answer and Wait are in the dialplan merely for debugging this problem.
>
> I cannot dialout via the FXO either, Asterisk appears to be doing
> everything correctly but never touches the line.
>
> I am running Asterisk 1.2.5 and Zaptel 1.2.4 on Kernel 2.6.15.6 with a
> TDM12B REV I
Please excuse the self reply but I missed some info from my original post.
The FXS module in the board works as expected - I can dial to and from it and
SIP phones.
I have tried shifting the modules around the board and using the two different
modules with the same result.
The card has it's own interrupt and zttest consistently gives 99.987793%
I have used another TDM card on this line with Kewlstart signalling and it
worked correctly, this was with Asterisk 1.0.9 though.
Thanks again.
hads
--
He who is known as an early riser need not get up until noon.
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] TDM400 FXO module not answering or dialing out.
Hi all,
I have hit a wall configuring a TDM400, I have set these up before without
issue but today I just can't seem to figure out what I am doing wrong.
On an incoming call the following is produced in the Asterisk console with
verbose 4
-- Starting simple switch on 'Zap/2-1'
Mar 22 16:12:34 NOTICE[2051]: chan_zap.c:6063 ss_thread: Got event 18 (Ring
Begin)...
Mar 22 16:12:34 NOTICE[2051]: chan_zap.c:6063 ss_thread: Got event 2
(Ring/Answered)...
Mar 22 16:12:37 NOTICE[2051]: chan_zap.c:6063 ss_thread: Got event 18 (Ring
Begin)...
-- Executing Answer("Zap/2-1", "") in new stack
-- Executing Wait("Zap/2-1", "15") in new stack
Mar 22 16:12:37 WARNING[2051]: chan_zap.c:3926 zt_handle_event: Ring/Off-hook
in strange state 6 on channel 2
Mar 22 16:12:38 WARNING[2051]: chan_zap.c:3926 zt_handle_event: Ring/Off-hook
in strange state 6 on channel 2
Asterisk doesn't answer the line. For debugging I have a POTS phone plugged
into the line as well as the FXO and this phone continues to ring. The Answer
and Wait are in the dialplan merely for debugging this problem.
I cannot dialout via the FXO either, Asterisk appears to be doing everything
correctly but never touches the line.
I am running Asterisk 1.2.5 and Zaptel 1.2.4 on Kernel 2.6.15.6 with a TDM12B
REV I
The board has a FXS module installed in slot 1 and a FXO module installed in
slots 2 and 3.
The following is my /etc/zaptel.conf;
loadzone=nz
defaultzone=nz
fxoks=1
fxsks=2-3
The following is my /etc/asterisk/zapata.conf;
[channels]
context=internal
signalling=fxo_ks
channel => 1
;busydetect=no
;callprogress=no
context=from-zap
signalling=fxs_ks
channel => 2-3
I am loading the wctdm module with opermode=NEWZEALAND but have tried omitting
this with no result.
There are some posts in the list archive from late 2003 about this same issue
that were resolved by adding busydetect=no/callprogress=no to zapata.conf
although this seems to have no effect for me. I can find no other solutions
via Google.
Any help would be gratefully appreciated. I have omitted some needed
information then please let me know.
Cheers,
hads
--
There's no secret to balance. You just have to feel the waves.
-- Darwi Odrade
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
