Sorry to post such a newb set of questions but I have been hammering about trying to get Asterisk running on FC2 machine reading everything available (I think that is what stuffed me, shouldn't have read it all :-) ).
Config FC2 running Asterisk 1.0.0, with the h323 compiled in and installed correctly. Amazingly enough I have everything compiled correctly and installed. I am running a TDM400P, Port 1 FXS, Port 4 FXO. I have my PSTN line plugged into 1 port and my Analogue phone plugged into port 4 (I think that's right I get tone on the phone when I pick it up and echo works). /etc/zaptel.conf fxols=1 fxsls=4 ; Weird but I was told to have the fxols fxsls reverse to the actually module loadzone = au defaultzone = au /etc/zapata.conf [channels] context=default switchtype=national usecallerid=yes hidecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 signalling=fxo_ls callgroup=1 pickupgroup=1 immediate=no context=internal busydetect=yes callerid="James Bean<690>" ;assuming extension 690 mailbox=690 ;stutter tone for voicemail - you can use an optional context here transfer=yes channel=>1 group=2 signalling=fxs_ls context=pstn channel=>4 Extensions.conf [internal] exten => i,1,Playback(invalid) exten => i,2,Hangup exten => t,1,Hangup exten => 099,1,Echo ;simple echo test when you dial 099 on your phone [outgoing] exten => _1XX,1,Dial(H323/[EMAIL PROTECTED]) ; 1xx extension to Salisbury exten => _2XX,1,Dial(H323/[EMAIL PROTECTED]) ; 2xx extension to Marcoola exten => 610,1,Dial(H323/[EMAIL PROTECTED]) ; 610 to Jindalee exten => 620,1,Dial(H323/[EMAIL PROTECTED]) ; 620 to Batteryhill exten => _54XXXXXX,1,Dial(H323/[EMAIL PROTECTED]) ; 54 to Marcoola exten => _0754XXXXXX,1,Dial(H323/[EMAIL PROTECTED]) ; 54 to Marcoola exten => _XXXXXXXX,1,Dial(Zap/g2/${EXTEN}) H323.conf [general] port = 1720 bindaddr = 192.168.69.1 tos=lowdelay disallow=all allow=g723.1 allow=gsm -------------------------------------- I can pick up the phone and ring 099 and echo works but if I dial anything else I just get a busy signal with no errors on asterisk -vvvvc, what I need is for ANY incoming calls to make the analogue phone ring. Outgoing calls that fit the rules use h323, everything else should pick up the PSTN line and dial. I again apologise for the mess and newbness (did I just invent a word), I just need a kick start and get the basic stuff working before I start playing. Also, anyone had asterisk talking to OKI Voip like BV1250 units working?, if so can you drop me an email. James _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users