RE: [asterisk-users] TE110P: Error ==> Asterisk died with code 1.
The revision on this card was new and my version of zaptel (1.2.11) did not support my pri signaling for that card. I upgraded zaptel through svn and all was good. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tzafrir Cohen Sent: Wednesday, February 28, 2007 12:01 PM To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] TE110P: Error ==> Asterisk died with code 1. On Wed, Feb 28, 2007 at 10:47:48AM -0500, Jeronimo Romero wrote: > Thank you all. Was a signaling issue. And for the benefit of those who will read the archive: how have you debugged it? how have you resolved it? -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] TE110P: Error ==> Asterisk died with code 1.
On Wed, Feb 28, 2007 at 10:47:48AM -0500, Jeronimo Romero wrote: > Thank you all. Was a signaling issue. And for the benefit of those who will read the archive: how have you debugged it? how have you resolved it? -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] TE110P: Error ==> Asterisk died with code 1.
Thank you all. Was a signaling issue. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tzafrir Cohen Sent: Wednesday, February 28, 2007 12:55 AM To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] TE110P: Error ==> Asterisk died with code 1. On Tue, Feb 27, 2007 at 08:01:41PM -0500, Jeronimo Romero wrote: > Running Asterisk 1.2.9. I just installed a TE110P card and configured > zaptel.conf & zapata.conf. The config files look right to me but I'm > getting the following error when trying to start asterisk: > > Asterisk died with code 1. > Automatically restarting Asterisk. > > Does anyone have any idea what is wrong with this configuration?? > Thanks in advance!!! What is the output of: cat /proc/zaptel/* -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] TE110P: Error ==> Asterisk died with code 1.
On Tue, Feb 27, 2007 at 08:01:41PM -0500, Jeronimo Romero wrote: > Running Asterisk 1.2.9. I just installed a TE110P card and configured > zaptel.conf & zapata.conf. The config files look right to me but I'm > getting the following error when trying to start asterisk: > > Asterisk died with code 1. > Automatically restarting Asterisk. > > Does anyone have any idea what is wrong with this configuration?? > Thanks in advance!!! What is the output of: cat /proc/zaptel/* -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] TE110P: Error ==> Asterisk died with code 1.
I see that you have signaling listed twice. That might be causing a problem. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Totaro Sent: Tuesday, February 27, 2007 6:54 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] TE110P: Error ==> Asterisk died with code 1. Jeronimo Romero wrote: > Running Asterisk 1.2.9. I just installed a TE110P card and configured > zaptel.conf & zapata.conf. The config files look right to me but I'm > getting the following error when trying to start asterisk: > > Asterisk died with code 1. > Automatically restarting Asterisk. > > Does anyone have any idea what is wrong with this configuration?? > Thanks in advance!!! > > > Here's my config files: > > zaptel.conf > > span=1,1,0,esf,b8zs > bchan=1-23 > dchan=24 > loadzone=us > defaultzone=us > > Zapata.conf > > [channels] > context=from-pstn > switchtype=national > signalling=pri_cpe > rxwink=300 > usecallerid=yes > hidecallerid=no > callwaiting=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > echocancel=yes > rxgain=0.0 > txgain=0.0 > immediate=yes > group=0 > signalling=pri_cpe > context = from-pstn > channel =>1-23 > > == > Jeronimo Romero > EUS Networks > Email: [EMAIL PROTECTED] > Cell: 917-332-7238 > Office: 212-624-5943 > Web: www.euscorp.com > == > > tail /var/log/asterisk/full will give you good insight. Thanks, Steve ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] TE110P: Error ==> Asterisk died with code 1.
Jeronimo Romero wrote: Running Asterisk 1.2.9. I just installed a TE110P card and configured zaptel.conf & zapata.conf. The config files look right to me but I'm getting the following error when trying to start asterisk: Asterisk died with code 1. Automatically restarting Asterisk. Does anyone have any idea what is wrong with this configuration?? Thanks in advance!!! Here's my config files: zaptel.conf span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone=us defaultzone=us Zapata.conf [channels] context=from-pstn switchtype=national signalling=pri_cpe rxwink=300 usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes echocancel=yes rxgain=0.0 txgain=0.0 immediate=yes group=0 signalling=pri_cpe context = from-pstn channel =>1-23 == Jeronimo Romero EUS Networks Email: [EMAIL PROTECTED] Cell: 917-332-7238 Office: 212-624-5943 Web: www.euscorp.com == tail /var/log/asterisk/full will give you good insight. Thanks, Steve ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] TE110P: Error ==> Asterisk died with code 1.
Running Asterisk 1.2.9. I just installed a TE110P card and configured zaptel.conf & zapata.conf. The config files look right to me but I'm getting the following error when trying to start asterisk: Asterisk died with code 1. Automatically restarting Asterisk. Does anyone have any idea what is wrong with this configuration?? Thanks in advance!!! Here's my config files: zaptel.conf span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone=us defaultzone=us Zapata.conf [channels] context=from-pstn switchtype=national signalling=pri_cpe rxwink=300 usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes echocancel=yes rxgain=0.0 txgain=0.0 immediate=yes group=0 signalling=pri_cpe context = from-pstn channel =>1-23 == Jeronimo Romero EUS Networks Email: [EMAIL PROTECTED] Cell: 917-332-7238 Office: 212-624-5943 Web: www.euscorp.com == ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE110P error
I'm getting this error now [chan_zap.so]Jan 10 09:05:05 WARNING[-1084362080]: loader.c:248 ast_load_resource: /usr/lib/asterisk/modules/chan_zap.so: undefined symbol: pri_dump_info Jan 10 09:05:05 WARNING[-1084362080]: loader.c:429 load_modules: Loading module chan_zap.so failed! On Mon, 2005-01-10 at 08:42, Steven Critchfield wrote: > On Mon, 2005-01-10 at 01:33 -0500, Alexander Lopez wrote: > > You are using a PRI based config for POTS lines. It will no worky. Post > > your zap*.conf files. > > > > I'll take a look at them for you.. > > How do you plug analog lines into a T1/E1 card? > > A better guess is either the driver for the card isn't loaded or the zap > config files aren't agreeing with each other. > > > -Original Message- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Altus > > Snyman > > Sent: Monday, January 10, 2005 1:24 AM > > To: asterisk > > Subject: [Asterisk-Users] TE110P error > > > > Good day all > > We got a Wildcard TE110P > > I installed linux,zaptel,libpti and asterisk > > I coped over my zaptel.conf and zapata.conf from a previous E100P config > > But when I try to start asterisk it gives error not bying able to load > > zap channles: > > == Parsing '/etc/asterisk/zapata.conf': Found > > Jan 10 08:17:18 WARNING[-1084595552]: chan_zap.c:9308 setup_zap: > > Ignoring switchtype > > Jan 10 08:17:18 ERROR[-1084595552]: chan_zap.c:9131 setup_zap: Unknown > > signalling method 'pri_cpe' > > Jan 10 08:17:18 ERROR[-1084595552]: chan_zap.c:8789 setup_zap: > > Signalling must be specified before any channels are. > > Jan 10 08:17:18 WARNING[-1084595552]: loader.c:334 ast_load_resource: > > chan_zap.so: load_module failed, returning -1 > > == Unregistered channel type 'Tor' > > == Unregistered channel type 'Zap' > > Jan 10 08:17:18 WARNING[-1084595552]: loader.c:429 load_modules: Loading > > module chan_zap.so failed! ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE110P error
Sorry, its late here in Miami. 2:00AM. I thought it was a TDMXX card. Read too quickly. Maybe its time to go to sleep. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steven Critchfield Sent: Monday, January 10, 2005 1:42 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE110P error On Mon, 2005-01-10 at 01:33 -0500, Alexander Lopez wrote: > You are using a PRI based config for POTS lines. It will no worky. Post > your zap*.conf files. > > I'll take a look at them for you.. How do you plug analog lines into a T1/E1 card? A better guess is either the driver for the card isn't loaded or the zap config files aren't agreeing with each other. > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Altus > Snyman > Sent: Monday, January 10, 2005 1:24 AM > To: asterisk > Subject: [Asterisk-Users] TE110P error > > Good day all > We got a Wildcard TE110P > I installed linux,zaptel,libpti and asterisk > I coped over my zaptel.conf and zapata.conf from a previous E100P config > But when I try to start asterisk it gives error not bying able to load > zap channles: > == Parsing '/etc/asterisk/zapata.conf': Found > Jan 10 08:17:18 WARNING[-1084595552]: chan_zap.c:9308 setup_zap: > Ignoring switchtype > Jan 10 08:17:18 ERROR[-1084595552]: chan_zap.c:9131 setup_zap: Unknown > signalling method 'pri_cpe' > Jan 10 08:17:18 ERROR[-1084595552]: chan_zap.c:8789 setup_zap: > Signalling must be specified before any channels are. > Jan 10 08:17:18 WARNING[-1084595552]: loader.c:334 ast_load_resource: > chan_zap.so: load_module failed, returning -1 > == Unregistered channel type 'Tor' > == Unregistered channel type 'Zap' > Jan 10 08:17:18 WARNING[-1084595552]: loader.c:429 load_modules: Loading > module chan_zap.so failed! -- Steven Critchfield <[EMAIL PROTECTED]> ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE110P error
On Mon, 2005-01-10 at 01:33 -0500, Alexander Lopez wrote: > You are using a PRI based config for POTS lines. It will no worky. Post > your zap*.conf files. > > I'll take a look at them for you.. How do you plug analog lines into a T1/E1 card? A better guess is either the driver for the card isn't loaded or the zap config files aren't agreeing with each other. > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Altus > Snyman > Sent: Monday, January 10, 2005 1:24 AM > To: asterisk > Subject: [Asterisk-Users] TE110P error > > Good day all > We got a Wildcard TE110P > I installed linux,zaptel,libpti and asterisk > I coped over my zaptel.conf and zapata.conf from a previous E100P config > But when I try to start asterisk it gives error not bying able to load > zap channles: > == Parsing '/etc/asterisk/zapata.conf': Found > Jan 10 08:17:18 WARNING[-1084595552]: chan_zap.c:9308 setup_zap: > Ignoring switchtype > Jan 10 08:17:18 ERROR[-1084595552]: chan_zap.c:9131 setup_zap: Unknown > signalling method 'pri_cpe' > Jan 10 08:17:18 ERROR[-1084595552]: chan_zap.c:8789 setup_zap: > Signalling must be specified before any channels are. > Jan 10 08:17:18 WARNING[-1084595552]: loader.c:334 ast_load_resource: > chan_zap.so: load_module failed, returning -1 > == Unregistered channel type 'Tor' > == Unregistered channel type 'Zap' > Jan 10 08:17:18 WARNING[-1084595552]: loader.c:429 load_modules: Loading > module chan_zap.so failed! -- Steven Critchfield <[EMAIL PROTECTED]> ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE110P error
You are using a PRI based config for POTS lines. It will no worky. Post your zap*.conf files. I'll take a look at them for you.. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Altus Snyman Sent: Monday, January 10, 2005 1:24 AM To: asterisk Subject: [Asterisk-Users] TE110P error Good day all We got a Wildcard TE110P I installed linux,zaptel,libpti and asterisk I coped over my zaptel.conf and zapata.conf from a previous E100P config But when I try to start asterisk it gives error not bying able to load zap channles: == Parsing '/etc/asterisk/zapata.conf': Found Jan 10 08:17:18 WARNING[-1084595552]: chan_zap.c:9308 setup_zap: Ignoring switchtype Jan 10 08:17:18 ERROR[-1084595552]: chan_zap.c:9131 setup_zap: Unknown signalling method 'pri_cpe' Jan 10 08:17:18 ERROR[-1084595552]: chan_zap.c:8789 setup_zap: Signalling must be specified before any channels are. Jan 10 08:17:18 WARNING[-1084595552]: loader.c:334 ast_load_resource: chan_zap.so: load_module failed, returning -1 == Unregistered channel type 'Tor' == Unregistered channel type 'Zap' Jan 10 08:17:18 WARNING[-1084595552]: loader.c:429 load_modules: Loading module chan_zap.so failed! Please Help Altus ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] TE110P error
Good day all We got a Wildcard TE110P I installed linux,zaptel,libpti and asterisk I coped over my zaptel.conf and zapata.conf from a previous E100P config But when I try to start asterisk it gives error not bying able to load zap channles: == Parsing '/etc/asterisk/zapata.conf': Found Jan 10 08:17:18 WARNING[-1084595552]: chan_zap.c:9308 setup_zap: Ignoring switchtype Jan 10 08:17:18 ERROR[-1084595552]: chan_zap.c:9131 setup_zap: Unknown signalling method 'pri_cpe' Jan 10 08:17:18 ERROR[-1084595552]: chan_zap.c:8789 setup_zap: Signalling must be specified before any channels are. Jan 10 08:17:18 WARNING[-1084595552]: loader.c:334 ast_load_resource: chan_zap.so: load_module failed, returning -1 == Unregistered channel type 'Tor' == Unregistered channel type 'Zap' Jan 10 08:17:18 WARNING[-1084595552]: loader.c:429 load_modules: Loading module chan_zap.so failed! Please Help Altus ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users