RE: [Asterisk-Users] Two outbound calls at once
Actually, if I place 2 calls at once, one from the Vodavi and one from a single line on a channel bank, it all works correctly. If I place 2 calls at once from the Vodavi (attached to * via a T1, not PRI) I have the problem. It doesn't matter what numbers I call. There is no problem placing 2 calls at once from the Vodavi when it is connected directly to the CO, but only when I run it through *. Thanks, Dave -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of C. Maj Sent: Friday, July 09, 2004 8:43 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Two outbound calls at once On Thu, 8 Jul 2004, David Goldfein waxed: Hello, I am having an issue with making two simultaneous outbound calls. When I dial, both phones try to take the same channel and it causes an error. Anyone have any suggestions. My set up is as follows: CO - PRI - ASTERISK - VODAVI(pbx). Thanks, Dave *CLI 8's It doesn't look like you have a channel collision problem, other than the same far end number being dialed. Are you able to place at least one call with success ? --Chris -- Chris Maj, Rochester cmaj_at_freedomcorpse_dot_com Pronunciation Guide: Maj == May ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Two outbound calls at once
On Thu, 8 Jul 2004, David Goldfein waxed: Hello, I am having an issue with making two simultaneous outbound calls. When I dial, both phones try to take the same channel and it causes an error. Anyone have any suggestions. My set up is as follows: CO - PRI - ASTERISK - VODAVI(pbx). Thanks, Dave *CLI 8's It doesn't look like you have a channel collision problem, other than the same far end number being dialed. Are you able to place at least one call with success ? --Chris -- Chris Maj, Rochester cmaj_at_freedomcorpse_dot_com Pronunciation Guide: Maj == May ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Two outbound calls at once
Hello, I am having an issue with making two simultaneous outbound calls. When I dial, both phones try to take the same channel and it causes an error. Anyone have any suggestions. My set up is as follows: CO PRI ASTERISK VODAVI(pbx). Thanks, Dave *CLI -- Starting simple switch on 'Zap/69-1' -- Executing Wait(Zap/69-1, .1) in new stack -- Executing DISA(Zap/69-1, no-password|local) in new stack -- Starting simple switch on 'Zap/68-1' -- Executing Wait(Zap/68-1, .1) in new stack -- Executing DISA(Zap/68-1, no-password|local) in new stack Jul 8 20:44:20 WARNING[-1394406480]: cdr.c:286 ast_cdr_init: CDR already initialized on 'Zap/69-1' -- Executing Dial(Zap/69-1, Zap/g2/6022831234) in new stack -- Called g2/6022831234 Jul 8 20:44:20 WARNING[-1416709200]: cdr.c:286 ast_cdr_init: CDR already initialized on 'Zap/68-1' -- Executing Dial(Zap/68-1, Zap/g2/6022831234) in new stack -- Called g2/6022831234 -- Channel 0/2, span 2 got hangup -- Forcing restart of channel 0/2 on span 2 since channel reported in use -- Hungup 'Zap/26-1' == No one is available to answer at this time -- Executing Congestion(Zap/68-1, ) in new stack -- Channel 0/1, span 2 got hangup -- B-channel 0/2 successfully restarted on span 2 -- Hungup 'Zap/25-1' == No one is available to answer at this time -- Executing Congestion(Zap/69-1, ) in new stack == Spawn extension (local, 2831234, 2) exited non-zero on 'Zap/69-1' -- Hungup 'Zap/69-1' == Spawn extension (local, 2831234, 2) exited non-zero on 'Zap/68-1' -- Hungup 'Zap/68-1'
