Hi,Here are the step by step instructions for setting up a brand new AudiocodesFXS gateway for use with an Asterisk server: Connect the gateway to a network switch and connect a computer to the same
switch. Then configure the IP address of the computer to 10.1.10.2. Then runyour web browser and point it to http://10.1.10.10 and login using the
information below.Default IP address: 10.1.10.10Default user name: AdminDefault password: AdminGoto "Quick Setup" and change the following:IP Address => Set to the new IP address of the AudioCodes gateway
Subnet Mask => Set to the correct netmask for your local network Default Gateway Address => Set to the correct gateway IP address for yourlocal network Working With Proxy => Set to "Yes"
Proxy IP Address => Set to the IP address of the Asterisk server Enable Registration => Set to "Enable"Restart the gateway then log back in using the new IP address.Goto Protocol Management -> Protocol Definition -> Proxy & Registration
Registrar IP Address => Set to the IP address of the Asterisk server Registration Time => Set to "60"Subscription Mode => Set to "Per Endpoint"Authentication Mode => Set to "Per Endpoint"
Goto Protocol Management -> Protocol Definition -> DTMF & Dialing Max Digits In Phone Num => Set to a large enough number such as "32"Goto Protocol Management -> Protocol Definition -> Coders
Add coders as needed You need to set at least G.711U-lawGoto Protocol Management -> Endpoint Settings -> Authentication Set SIP username and password for each portGoto Protocol Management -> Endpoint Phone Numbers
Enter an extension (phone) number for every used channelYour AudioCodes gateway is now ready.../Arun[EMAIL PROTECTED]
www.intelegentnetworks.comOn 6/27/06, Mark Adams <[EMAIL PROTECTED]
> wrote:
Hello,
Anyone here
have experience with Audiocodes MediaPack MP-108 Gateways?
I would
be willing to pay someone for advice and support with configuring my gateways
for a telemarketing project I am starting. My experience is somewhat limited
but all I want to do is make outbound calls just like I would on normal pots
lines. (That's the best way to explain it) I do not need any special
configuration nor am I going to use it for any incoming calls. I would like to
just have the gateways register and properly send calls out and relay DTMF
tones. After I get them up and running I should have the manual read and
digested by then and I will be good to go.
Anyone interested
please email me off list
Mark
Adams
Infinity Marketing
216-334-9304
___--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing listTo UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
