RE: [Asterisk-Users] X100P answer in first Ring
If you have caller-id, it comes between the first and second rings. That's why * doesn't pick up until the second ring.-- Joe Dennick[EMAIL PROTECTED]-Original Message-From: "Boater" <[EMAIL PROTECTED]>Sent: Tuesday, 18. May 2004 10:45 -0500To: <[EMAIL PROTECTED]>Subject: RE: [Asterisk-Users] X100P answer in first RingIs this the same thing as:immediate=yes -Original Message-From: Senad Jordanovic [mailto:[EMAIL PROTECTED]Sent: Tuesday, May 18, 2004 10:21 AMTo: [EMAIL PROTECTED]Subject: RE: [Asterisk-Users] X100P answer in first Ringput:mode=immediate in your zapata.conf file-Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alberto SatoSent: 18 May 2004 16:14To: [EMAIL PROTECTED]Subject: [Asterisk-Users] X100P answer in first RingHow I can do to X100P (FXO port) answer in the first Ring? Do you Yahoo!?SBC Yahoo! - Internet access at a great low price.
RE: [Asterisk-Users] X100P answer in first Ring
Title: Message usecallerid=no in zapata.conf -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Senad JordanovicSent: terça-feira, 18 de maio de 2004 13:24To: [EMAIL PROTECTED]Subject: RE: [Asterisk-Users] X100P answer in first Ring I would imagine that it is I will test it , and post the result back! -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of BoaterSent: 18 May 2004 16:45To: [EMAIL PROTECTED]Subject: RE: [Asterisk-Users] X100P answer in first Ring Is this the same thing as: immediate=yes -Original Message-From: Senad Jordanovic [mailto:[EMAIL PROTECTED]Sent: Tuesday, May 18, 2004 10:21 AMTo: [EMAIL PROTECTED]Subject: RE: [Asterisk-Users] X100P answer in first Ring put: mode=immediate in your zapata.conf file -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alberto SatoSent: 18 May 2004 16:14To: [EMAIL PROTECTED]Subject: [Asterisk-Users] X100P answer in first Ring How I can do to X100P (FXO port) answer in the first Ring? Do you Yahoo!?SBC Yahoo! - Internet access at a great low price.
RE: [Asterisk-Users] X100P answer in first Ring
Title: Message I would imagine that it is I will test it , and post the result back! -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of BoaterSent: 18 May 2004 16:45To: [EMAIL PROTECTED]Subject: RE: [Asterisk-Users] X100P answer in first Ring Is this the same thing as: immediate=yes -Original Message-From: Senad Jordanovic [mailto:[EMAIL PROTECTED]Sent: Tuesday, May 18, 2004 10:21 AMTo: [EMAIL PROTECTED]Subject: RE: [Asterisk-Users] X100P answer in first Ring put: mode=immediate in your zapata.conf file -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alberto SatoSent: 18 May 2004 16:14To: [EMAIL PROTECTED]Subject: [Asterisk-Users] X100P answer in first Ring How I can do to X100P (FXO port) answer in the first Ring? Do you Yahoo!?SBC Yahoo! - Internet access at a great low price.
RE: [Asterisk-Users] X100P answer in first Ring
Title: Message Is this the same thing as: immediate=yes -Original Message-From: Senad Jordanovic [mailto:[EMAIL PROTECTED]Sent: Tuesday, May 18, 2004 10:21 AMTo: [EMAIL PROTECTED]Subject: RE: [Asterisk-Users] X100P answer in first Ring put: mode=immediate in your zapata.conf file -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alberto SatoSent: 18 May 2004 16:14To: [EMAIL PROTECTED]Subject: [Asterisk-Users] X100P answer in first Ring How I can do to X100P (FXO port) answer in the first Ring? Do you Yahoo!?SBC Yahoo! - Internet access at a great low price.
Re: [Asterisk-Users] X100P answer in first Ring
On Tue, 2004-05-18 at 10:13, Alberto Sato wrote: > How I can do to X100P (FXO port) answer in the first Ring? usecallerid-no -- Eric Wieling * BTEL Consulting * 504-899-1387 x2111 "In a related story, the IRS has recently ruled that the cost of Windows upgrades can NOT be deducted as a gambling loss." ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] X100P answer in first Ring
Title: Message put: mode=immediate in your zapata.conf file -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alberto SatoSent: 18 May 2004 16:14To: [EMAIL PROTECTED]Subject: [Asterisk-Users] X100P answer in first Ring How I can do to X100P (FXO port) answer in the first Ring? Do you Yahoo!?SBC Yahoo! - Internet access at a great low price.
[Asterisk-Users] X100P answer in first Ring
How I can do to X100P (FXO port) answer in the first Ring? Do you Yahoo!?SBC Yahoo! - Internet access at a great low price.
RE: [Asterisk-Users] x100p / Answer-> Flash -> Dial
Title: Message Dan, This will probably not work. Once Asterisk tells the Panasonic PBX to transfer the call, the call will no longer go through the extension the Asterisk PBX is attached to. It seems the only solution to this (doing it the way you are) is to have two zaptel cards in the Asterisk PBX, attache them to two extensions of the Panasonic PBX and the calls come in one extension and then are sent out the other KEEPING BOTH BUSY as long as the call is in progress. As Sam said, you will really need to have an intelligent connection to the Panasonic PBX to do this on much more than a single call at a time basis. Disclaimer: I am an Asterisk Newbie, though I have been following it for several years, my hands on experience is about a week old. Andy Farnsworth -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sam BingnerSent: Saturday, May 08, 2004 10:54 PMTo: [EMAIL PROTECTED]Subject: RE: [Asterisk-Users] x100p / Answer-> Flash -> Dial Even if you could get that to work properly, which I dont know... the callprogress detection is horrible; if you want to do that reliably you need a T1,ISDN or IP interface to the switch (something that actually provides proper call progress) Sam -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan FernandezSent: Saturday, May 08, 2004 11:44 AMTo: [EMAIL PROTECTED]Subject: [Asterisk-Users] x100p / Answer-> Flash -> Dial I have an X100P connected to an extension of a Panasonic PBX. When a call from the PSTN comes in, it is routed directly to the extension where the x100p is . I want * to answer the call, play a message and then transfer the call to another extension via the Zap channel where the call was received (I need to flash the zap channel) . If this extension doesn't answer I want then to dial an IAX channel. The problem is that when I do a Flash on the zap channel, and then try to dial a new extension via that zap channel I get the following error "can't create zap channel". If I do a SendDTMF() the call does get transfer to the new extension but then * gets out of the call loop and don't know it is answered or not by the new extension. Am I missing something? Why am I getting the "can't creat za channel" Thanks in advance. Dan
RE: [Asterisk-Users] x100p / Answer-> Flash -> Dial
Title: Message Even if you could get that to work properly, which I dont know... the callprogress detection is horrible; if you want to do that reliably you need a T1,ISDN or IP interface to the switch (something that actually provides proper call progress) Sam -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan FernandezSent: Saturday, May 08, 2004 11:44 AMTo: [EMAIL PROTECTED]Subject: [Asterisk-Users] x100p / Answer-> Flash -> Dial I have an X100P connected to an extension of a Panasonic PBX. When a call from the PSTN comes in, it is routed directly to the extension where the x100p is . I want * to answer the call, play a message and then transfer the call to another extension via the Zap channel where the call was received (I need to flash the zap channel) . If this extension doesn't answer I want then to dial an IAX channel. The problem is that when I do a Flash on the zap channel, and then try to dial a new extension via that zap channel I get the following error "can't create zap channel". If I do a SendDTMF() the call does get transfer to the new extension but then * gets out of the call loop and don't know it is answered or not by the new extension. Am I missing something? Why am I getting the "can't creat za channel" Thanks in advance. Dan smime.p7s Description: S/MIME cryptographic signature
[Asterisk-Users] x100p / Answer-> Flash -> Dial
I have an X100P connected to an extension of a Panasonic PBX. When a call from the PSTN comes in, it is routed directly to the extension where the x100p is . I want * to answer the call, play a message and then transfer the call to another extension via the Zap channel where the call was received (I need to flash the zap channel) . If this extension doesn't answer I want then to dial an IAX channel. The problem is that when I do a Flash on the zap channel, and then try to dial a new extension via that zap channel I get the following error "can't create zap channel". If I do a SendDTMF() the call does get transfer to the new extension but then * gets out of the call loop and don't know it is answered or not by the new extension. Am I missing something? Why am I getting the "can't creat za channel" Thanks in advance. Dan
[Asterisk-Users] x100p / Answer-> Flash -> Dial
I have an X100P connected to an extension of a Panasonic PBX. When a call from the PSTN comes in, it is routed directly to the extension where the x100p is . I want * to answer the call, play a message and then transfer the call to another extension via the Zap channel where the call was received (I need to flash the zap channel) . If this extension doesn't answer I want then to dial an IAX channel. The problem is that when I do a Flash on the zap channel, and then try to dial a new extension via that zap channel I get the following error "can't create zap channel". If I do a SendDTMF() the call does get transfer to the new extension but then * gets out of the call loop and don't know it is answered or not by the new extension. Am I missing something? Why am I getting the "can't creat za channel" Thanks in advance. Dan
Re: [Asterisk-Users] X100P Answer
You've probably got callerID enabled in zapata.conf. That will cause a wait of several rings whilst * looks for the caller ID info. Since this only works in the US (or pkaces with similar phone systems), disabling it in other territories saves the ring delay. Make sure you have this in zapata.conf usecallerid=no IAin --On Friday, April 23, 2004 2:55 pm +0100 Mark Olliver <[EMAIL PROTECTED]> wrote: Hi, I seam to have a problem working out how to get my X100P to answer after 1 ring. Currently it is working fine and connects to the switchboard menu correctly but just does it after 4 rings, which I would prefer if we could reduce. Thanks Mark -- Mark Olliver Thermeon Europe Ltd. e-Card: http://www.thermeoneurope.com/e-Card/mpo Email [EMAIL PROTECTED] Web www.thermeoneurope.com Support 0906 515 0908 Int. Support +44 1293 864 341 Support Email [EMAIL PROTECTED] Sales +44 1293 864 334 Sales Email [EMAIL PROTECTED] ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] X100P Answer
On Fri, 23 Apr 2004 14:55:52 +0100, Mark Olliver wrote Hi, I seam to have a problem working out how to get my X100P to answer after 1 ring. Currently it is working fine and connects to the switchboard menu correctly but just does it after 4 rings, which I would prefer if we could reduce. I found recently that my X100P was getting two rings before answer. That´s because the way Caller ID works in US; it sends the info after the first ring and my board was waiting for it. I disabled caller ID on zapata.conf using usecallerid=no and now it aswers on first ring. Gelson ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] X100P Answer
On Fri, 23 Apr 2004, Mark Olliver wrote: > I seam to have a problem working out how to get my X100P to answer after > 1 ring. Currently it is working fine and connects to the switchboard > menu correctly but just does it after 4 rings, which I would prefer if > we could reduce. Try this: zapata.conf: ... immediate=yes usecallerid=no ... = Check all your rules for the context you included into zapata.conf for that line and get rid of any "wait(x)" line. My extensions.conf: [inbound] exten => s,1,Dial(${RECEPTION},25,tr) exten => s,2,Hangup exten => h,1,Hangup = I'm getting an immediate ring with these settings... ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] X100P Answer
On Fri, 23 Apr 2004 14:55:52 +0100, Mark Olliver wrote > Hi, > > I seam to have a problem working out how to get my X100P to answer > after 1 ring. Currently it is working fine and connects to the > switchboard menu correctly but just does it after 4 rings, which I > would prefer if we could reduce. > Usually you only have to put Answer() in the first line of yur default context and Asterisk will answer on the first ring. To delay it just put Wait(x) (number of seconds) before answer. -- Carlos Chavez Computer Engineer, CCNA Telecomunicaciones Abiertas de México S.A. de C.V. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] X100P Answer
in the [context] set in zaptel.conf ; exten => 6165551212,1,NoOp exten => 6165551212,2,Wait,2; seconds to wait before pickup exten => 6165551212,3,Answer ; On Fri, 23 Apr 2004, Mark Olliver wrote: > > Hi, > > I seam to have a problem working out how to get my X100P to answer after > 1 ring. Currently it is working fine and connects to the switchboard > menu correctly but just does it after 4 rings, which I would prefer if > we could reduce. > > Thanks > > Mark > > -- > Mark Olliver > > Thermeon Europe Ltd. > > e-Card: http://www.thermeoneurope.com/e-Card/mpo > > Email [EMAIL PROTECTED] > Web www.thermeoneurope.com > > Support 0906 515 0908 > Int. Support +44 1293 864 341 > Support Email [EMAIL PROTECTED] > > Sales +44 1293 864 334 > Sales Email [EMAIL PROTECTED] > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > -Mike == Network Engineer Pathway Internet Services 616.774.3131 ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] X100P Answer
Hi, I seam to have a problem working out how to get my X100P to answer after 1 ring. Currently it is working fine and connects to the switchboard menu correctly but just does it after 4 rings, which I would prefer if we could reduce. Thanks Mark -- Mark Olliver Thermeon Europe Ltd. e-Card: http://www.thermeoneurope.com/e-Card/mpo Email [EMAIL PROTECTED] Web www.thermeoneurope.com Support 0906 515 0908 Int. Support +44 1293 864 341 Support Email [EMAIL PROTECTED] Sales +44 1293 864 334 Sales Email [EMAIL PROTECTED] ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users