Dear All,
I am a newbie about asterisk. I have 1x X100P card 3x Sip phone
I got aware of problem, after I saw the caller id on my sip phone. I noticed that if I receive a call from GSM Operator A, I can see caller id. But any other operator, I got no caller id, even my direct PSTN service operator. So at that moment I was using * 1.0.9. than I changed to [EMAIL PROTECTED] 1.3(1.0.9). I got same result. Then I connected an caller id analog phone to X100P phone port . I could see all CIDs from all operators (PSTN &GSM)
I searched CID standards. Our country is using ETSI standards. But I am not sure about which method we are using ( FSK or DTMF)
Then trials and patch searches and I find out some but no result, even I lost CID completely. I setup system again and again. I am using Debian 3.1 and as asterisk
1- asterisk 1.0.9 with zaptel 1.0.9
2- asterisk 1.2 beta1 with zaptel 1.2.beta1
3- asterisk 1.2 betal1 with zaptel 1.0.9
4- asterisk 1.0.9 with 1.0.7
5- with CVS
and with all configs my My zaptel.conf is
loadzone=us
defaultzone=us
fxsks=1
Zapata.conf ( I played with commented parameters)
[channels]
signalling=fxs_ks
context=incoming
language=us
immediate=no
usecallerid=yes
callerid=asreceived
useincomingcalleridonzaptransfer=yes ; I tried with /without / yes /no
usedistinctiveringdetection=no ; our op is not using
;cidsignalling=bell ; I tried bell, v23, dtmf
;cidstart=ring ; As I can see from my analog phone CID is coming after first ring. I tried ring and polarity
musiconhold=default
busydetect=no
;busycount=4
;busypattern=500,500
;hidecallerid=no
;callwaiting=yes
;usecallingpres=yes
;callwaitingcallerid=yes
;threewaycalling=yes
;transfer=yes
;canpark=yes
cancallforward=yes
;callreturn=yes
;echocancel=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
channel=1
callgroup=1
pickupgroup=1
Error message is
-- Starting simple switch on 'Zap/1-1'
-- Asterisk Urgent handler
callerid.c:312 callerid_feed: Caller*ID failed checksum
and usually with a ":success" at the end. Which make no sense
Now I am feeling like donkey but wanna solve this issue, So My Questions are:
1- What parameters I should use for ETSI in Zapata.conf and zaptel.conf
2- How Can I distinguish FSK and DMTF types ? any test method or any software to be sure ?
3- I see clidtest program but no success to compile it . do you know how ?
How can I solve callerid issue ????
Thanks
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
