Re: [asterisk-users] Zap problems
On Thursday, January 15, 2009, D Tucny wrote: > It's so much nicer to use packages, in the case of CentOS, RPMs... > that way everything installed is owned by the package and removal of > the package removes most of what was installed... Thanks for the reply. I must be missing something, since all I've found are the tarballs at asterisk.org and mirrors. However, I'm going to rebuild once I've proved it all works (possibly on a machine of better specification) so it would be good to know where the packages can be found. Thanks again, -- Geoff ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zap problems
On Wednesday, January 14, 2009, Carlos Chavez wrote: > Zaptel 1.2.9.1 will not work with Asterisk 1.4.22. I would recommend > you install Zaptel 1.4.12.1 or go to DAHDI. Thanks for the reply. Uninstalling DAHDI and switching to Zap 1.4 did the trick. I can now make calls to and from the PSTN and also use my analogue phone via the TDM card. Once I've sorted out the rest of the config and have time to "do things properly" I'll do some research into DAHDI with a view to rebuilding the Asterisk box. Hopefully, I'll be able to use most of the configuration I've done to get this far! Thanks again, -- Geoff ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zap problems
Zaptel 1.2.9.1 will not work with Asterisk 1.4.22. I would recommend you install Zaptel 1.4.12.1 or go to DAHDI. The first thing you need to do is erase all the zaptel modules from the /lib/modules/"kernel version" directory and do a "depmod -a" to make sure only the new DAHDI or Zaptel modules get loaded. If you install DAHDI and do not erase the zaptel modules you will get errors. On Wed, 2009-01-14 at 19:16 -0400, Jose P. Espinal wrote: > Have you tried recompiling/installing the new zaptel source before Asterisk? > > > > Geoff Lane wrote: > > Hi All, > > > > I'm running Asterisk 1.4.22.1 on a CentOS 5 machine fitted with a > > TDM400P. When I upgraded from Asterisk 1.2.12.1, Zap stopped working. > > Doing "zap show channels" etc from the Asterisk CLI results in an > > error saying there's no such command. > > > > The machine has Zaptel 1.2.9.1, which I've tried to repair with make > > clean, make linux26, then make install but to no avail so I thought > > it's time to bite the bullet and move to DAHDI. After installing DAHDI > > 2.1.0.3 I get an error saying that the hardware is already in use. > > I've tried to uninstall Zaptel as follows: > > > > - running /etc/init.d/zaptel stop > > - running /bin/modprobe -r zaptel > > - running make clean from the zaptel installation directory > > > > However, on rebooting Zap still loads, which causes DAHDI to throw an > > error. > > > > I'm currently downloading the latest version of CentOS with a view to > > rebuilding this machine to use DAHDI from the start if I can't sort > > this out - but I'd rather fix what I've got if possible. > > > > Any ideas? > > > > Thanks in advance, > > > > > > > ___ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users -- Telecomunicaciones Abiertas de México S.A. de C.V. Carlos Chávez Prats Director de Tecnología +52-55-91169161 ext 2001 signature.asc Description: This is a digitally signed message part ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zap problems
On Wednesday, January 14, 2009, Jose P. Espinal wrote: > Have you tried recompiling/installing the new zaptel source before > Asterisk? Thanks for the reply. It's the old Zaptel source that was working with Asterisk 1.2.12.1 and so was already compiled and installed prior to upgrading Asterisk. That said, I did try recompiling/installing Zap followed by recompiling/installing Asterisk, but to no avail. -- Geoff ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zap problems
Have you tried recompiling/installing the new zaptel source before Asterisk? Geoff Lane wrote: > Hi All, > > I'm running Asterisk 1.4.22.1 on a CentOS 5 machine fitted with a > TDM400P. When I upgraded from Asterisk 1.2.12.1, Zap stopped working. > Doing "zap show channels" etc from the Asterisk CLI results in an > error saying there's no such command. > > The machine has Zaptel 1.2.9.1, which I've tried to repair with make > clean, make linux26, then make install but to no avail so I thought > it's time to bite the bullet and move to DAHDI. After installing DAHDI > 2.1.0.3 I get an error saying that the hardware is already in use. > I've tried to uninstall Zaptel as follows: > > - running /etc/init.d/zaptel stop > - running /bin/modprobe -r zaptel > - running make clean from the zaptel installation directory > > However, on rebooting Zap still loads, which causes DAHDI to throw an > error. > > I'm currently downloading the latest version of CentOS with a view to > rebuilding this machine to use DAHDI from the start if I can't sort > this out - but I'd rather fix what I've got if possible. > > Any ideas? > > Thanks in advance, > > ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Zap problems
Hi All, I'm running Asterisk 1.4.22.1 on a CentOS 5 machine fitted with a TDM400P. When I upgraded from Asterisk 1.2.12.1, Zap stopped working. Doing "zap show channels" etc from the Asterisk CLI results in an error saying there's no such command. The machine has Zaptel 1.2.9.1, which I've tried to repair with make clean, make linux26, then make install but to no avail so I thought it's time to bite the bullet and move to DAHDI. After installing DAHDI 2.1.0.3 I get an error saying that the hardware is already in use. I've tried to uninstall Zaptel as follows: - running /etc/init.d/zaptel stop - running /bin/modprobe -r zaptel - running make clean from the zaptel installation directory However, on rebooting Zap still loads, which causes DAHDI to throw an error. I'm currently downloading the latest version of CentOS with a view to rebuilding this machine to use DAHDI from the start if I can't sort this out - but I'd rather fix what I've got if possible. Any ideas? Thanks in advance, -- Geoff ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] ZAP Problems
I would say it might be this... n zapata.conf language=en contect=default -> should be context=default switchtype-euroisdn signaling=fxs_ks rxwink=300 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David J Carter Posted At: Monday, January 26, 2004 6:12 AM Posted To: Asterisk User Group Conversation: [Asterisk-Users] ZAP Problems Subject: [Asterisk-Users] ZAP Problems Hi all, Since my upgrade to CVS dated 14-01-2004 I am unable to call or receive calls through my ZAP channel. When calling out I get the following message: - WARNING [155667]:app_dial.c:527 dial_exec: Unable to create channel of type ZAP In zaptel.conf fxsks=1 loadzone=uk defaultzone=uk In zapata.conf language=en contect=default switchtype-euroisdn signaling=fxs_ks rxwink=300 I have done: - modprobe zaptel modprobe wcfxo ztcfg -vv results: - Zaptel Configuration Channel Map: Channel 01: FXS Kewlstart (Default) (Salves:01) 1 Channels configured Any help to resolve would be appreciated. Regards Dave ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] ZAP Problems
Hi all, Since my upgrade to CVS dated 14-01-2004 I am unable to call or receive calls through my ZAP channel. When calling out I get the following message: - WARNING [155667]:app_dial.c:527 dial_exec: Unable to create channel of type ZAP In zaptel.conf fxsks=1 loadzone=uk defaultzone=uk In zapata.conf language=en contect=default switchtype-euroisdn signaling=fxs_ks rxwink=300 I have done: - modprobe zaptel modprobe wcfxo ztcfg -vv results: - Zaptel Configuration Channel Map: Channel 01: FXS Kewlstart (Default) (Salves:01) 1 Channels configured Any help to resolve would be appreciated. Regards Dave ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
