Re: [Asterisk-Users] indications issues in Singapore?
Good to know about that Loopstart thing --- helped me quickly solve my problem of the phones not ringing :-) thank you for the input Chris - Original Message - From: Leo Ann Boon [EMAIL PROTECTED] To: Chris Earle (CBL) [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, February 17, 2006 7:10 PM Subject: Re: [Asterisk-Users] indications issues in Singapore? Chris Earle (CBL) wrote: Hi all, haven't seen many posts about asterisk in Singapore... Getting a server going there and was wondering if TDM400Ps will be fine in FCC mode, and if there are indications / cadence values that I should be putting on there as in other international locations. Seen an unsettling post on voip-info about Singapore issues with Call Polarity/Hangup Detection -- crossing my fingers I don't run into that problem :-) Analog lines here are mostly loopstart, so you need to enable busydetect if you're using the zaptel FXO. A better option is to use a capi ISDN BRI card. I used the Fritz! PCI card with chan_capi, costs around S$160. The original poster on voip-info wrote about using kewlstart and CPC, which I have never encountered over here. I guess it was in vogue during the good old DID analog trunk days. But nowadays, you either use plain analog or move to BRI/PRI if you need MSN/DDI. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] indications issues in Singapore?
Hi all, haven't seen many posts about asterisk in Singapore... Getting a server going there and was wondering if TDM400Ps will be fine in FCC mode, and if there are indications / cadence values that I should be putting on there as in other international locations. Seen an unsettling post on voip-info about Singapore issues with Call Polarity/Hangup Detection -- crossing my fingers I don't run into that problem :-) Any tips appreciated, -- Chris Earle System Solutions Specialist -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] indications issues in Singapore?
Chris Earle (CBL) wrote: Hi all, haven't seen many posts about asterisk in Singapore... Getting a server going there and was wondering if TDM400Ps will be fine in FCC mode, and if there are indications / cadence values that I should be putting on there as in other international locations. Seen an unsettling post on voip-info about Singapore issues with Call Polarity/Hangup Detection -- crossing my fingers I don't run into that problem :-) Analog lines here are mostly loopstart, so you need to enable busydetect if you're using the zaptel FXO. A better option is to use a capi ISDN BRI card. I used the Fritz! PCI card with chan_capi, costs around S$160. The original poster on voip-info wrote about using kewlstart and CPC, which I have never encountered over here. I guess it was in vogue during the good old DID analog trunk days. But nowadays, you either use plain analog or move to BRI/PRI if you need MSN/DDI. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users