On Friday January 13 2006 10:14 pm, James Harper wrote:
The best I can do so far (which appears to be a bit of a hack) is
(:0S0), which says to add a '0' to the start of the string and dial
immediately. This gives asterisk an extension dialled of '0', which
isn't the 's' that i'd hoped for, but is a good start!
(S0) by itself doesn't work, nor does (:S0).
Any other suggestions?
Thanks
James
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of James Harper
Sent: Saturday, 14 January 2006 13:31
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] linksys pap2 automatically connect on
liftinghandset
Is there a way to configure the linksys pap2 to automatically connect
to
asterisk on lifting the handset (presumably into the 's' state)?
Asterisk would then be listening for DTMF tones to figure out what to
do
rather than having to put a dial plan into each pap2.
I think the pap2 is pretty much the same inside as a few of the sipura
boxes so the same thing might work if anyone knows...
Thanks
James
Create an extension that will catch what ever number you put into the PAP2 as
(SO:Extension_in_Asterisk)
This provides a hot line setup per the documentation for a SPA-3000 which I
believe has the same dial plan execution as the PAP2, at
least all the stuff i did on one worked on the other.
John M
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
