Maybe this will shed some light about what I'm trying to do:
This is some output from dmesg after this load order:
modprobe zaptel
insmod wcfxs
insmod qozap
Zapata Telephony Interface Registered on major 196
Freshmaker version: 73
Freshmaker passed register test
Module 0: Installed -- AUTO FXS/DPO
Module 1: Installed -- AUTO FXS/DPO
Module 2: Installed -- AUTO FXS/DPO
Module 3: Installed -- AUTO FXS/DPO
Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules)
PCI: Enabling device 02:01.0 ( - 0003)
qozap: Junghanns.NET quadBRI card configured at mem 0xf889b000 IRQ 17 HZ 100
CardID 0
qozap: S/T ports: 4 [ TE TE TE TE ]
qozap: 1 multiBRI card(s) in this box, 4 BRI ports total.
Zaptel Configuration
==
SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 3: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 4: CCS/ AMI Build-out: 399-533 feet (DSX-1)
Channel map:
Channel 01: Individual Clear channel (Default) (Slaves: 01)
Channel 02: Individual Clear channel (Default) (Slaves: 02)
Channel 03: D-channel (Default) (Slaves: 03)
Channel 04: Individual Clear channel (Default) (Slaves: 04)
Channel 05: Individual Clear channel (Default) (Slaves: 05)
Channel 06: D-channel (Default) (Slaves: 06)
Channel 07: Individual Clear channel (Default) (Slaves: 07)
Channel 08: Individual Clear channel (Default) (Slaves: 08)
Channel 09: D-channel (Default) (Slaves: 09)
Channel 10: Individual Clear channel (Default) (Slaves: 10)
Channel 11: Individual Clear channel (Default) (Slaves: 11)
Channel 12: D-channel (Default) (Slaves: 12)
Channel 13: FXO Kewlstart (Default) (Slaves: 13)
Channel 14: FXO Kewlstart (Default) (Slaves: 14)
Channel 15: FXO Kewlstart (Default) (Slaves: 15)
Channel 16: FXO Kewlstart (Default) (Slaves: 16)
16 channels configured.
ZT_SPANCONFIG failed on span 1: Invalid argument (22)
any thoughts?
Chris
- Original Message -
From: Chris Earle (CBL) [EMAIL PROTECTED]
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
asterisk-users@lists.digium.com
Sent: Thursday, March 16, 2006 10:09 AM
Subject: [Asterisk-Users] module load order for Junghanns qozap and TDM card
Hi all,
I'm trying to get a junghanns QuadBRI to coexist in the same machine as a
Digium TDM400P card (so I can run the ISDN lines in and bridge with
analog
phones plugged into the TDM).
I'm having a problem loading the modules. If I follow the BRIstuff
(0.3.0-pre-1l) install method it's to modprobe zaptel, then insmod
qozap.o
I'm on Debian 2.4.31.
That works.
But then I still need the Digium module. (modprobe wctdm)
I've tried a few different orders. Sometimes I can get the digium to
load,
and the qozap.
but then I get an error on the ztcfg about Span invalid argument (could
be
my zaptel.conf I realize...)
*If* I try loading the wctdm after the zaptel and qozap, the server
freezes!
Some loop about qozap - dropped audio card
I don't know if the quadBRI and the TDM are conflicting/sharing the zaptel
module, or if I need to modprobe zaptel before each of them? and in what
order?
Any suggestions appreciated... I haven't even got to figuring out what I
can
do with chan_capi, just want to get the BRI card on and stuff.
Thanks for any ideas!
--
Chris Earle
--
This message has been scanned for viruses and dangerous content by
MailScanner, and is believed to be clean.
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
This message has been scanned for viruses and dangerous content by
MailScanner, and is believed to be clean.
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
