Re: [asterisk-users] Pickup problem
On Wed, Jul 9, 2014 at 3:55 PM, Massimo Nuvoli mass...@archivio.it wrote: I found a very strange proble whit two asterisk servers in the same network. Scenario Asterisk A with extensions 5XX Asterisk B with extensions 2XX There is NO link between the two asterisks. Call from 501 to 503, 503 ringing Call from 201 to 203, 203 ringing The 202 extension comand a pickup (i dont manage this Asterisk, i think with the Pickup command). The 202 answer the 501 call and not the 201. snip Your description of the issue doesn't make any sense. You seem to be describing an extension on one Asterisk system using call pickup to pickup a call on another Asterisk system with no connection between the two. There is nowhere near enough information here to tell what is going on. Can you post an Asterisk full log showing the extension performing a call pickup? With that information someone may be able to help you. https://wiki.asterisk.org/wiki/display/AST/Collecting+Debug+Information -- Rusty Newton Digium, Inc. | Community Support Manager 445 Jan Davis Drive NW - Huntsville, AL 35806 - US direct: +1 256 428 6200 Check us out at: http://digium.com http://asterisk.org -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Pickup problem
Il 11/07/2014 16:45, Rusty Newton ha scritto: On Wed, Jul 9, 2014 at 3:55 PM, Massimo Nuvoli mass...@archivio.it wrote: I found a very strange proble whit two asterisk servers in the same network. Scenario Asterisk A with extensions 5XX Asterisk B with extensions 2XX There is NO link between the two asterisks. Call from 501 to 503, 503 ringing Call from 201 to 203, 203 ringing The 202 extension comand a pickup (i dont manage this Asterisk, i think with the Pickup command). The 202 answer the 501 call and not the 201. snip Your description of the issue doesn't make any sense. You seem to be describing an extension on one Asterisk system using call pickup to pickup a call on another Asterisk system with no connection between the two. There is nowhere near enough information here to tell what is going on. Can you post an Asterisk full log showing the extension performing a call pickup? With that information someone may be able to help you. I found the problem, and i want to share here :-) The problem was.. that the two asterisks casually take a same ip address on a side subnet. The only phone doing nasty things was on this subnet... So this is why all things happens. Really i cant figure this before a deep search of a reason, that was impossibile, and IS impossibile. But... i found how is possibile to take up a phone call ringing on a asterisk server... very very very bad. WOW Thnks. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Pickup problem
I found a very strange proble whit two asterisk servers in the same network. Scenario Asterisk A with extensions 5XX Asterisk B with extensions 2XX There is NO link between the two asterisks. Call from 501 to 503, 503 ringing Call from 201 to 203, 203 ringing The 202 extension comand a pickup (i dont manage this Asterisk, i think with the Pickup command). The 202 answer the 501 call and not the 201. extensions 5XX are all SNOM extensions 2XX are all Grandstream GX2000 This is the first time i can see two asterisk in the same net so... Why? :-) Thnks. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] pickup problem
Hi all, I can´t pickup calls on my asterisk. When I try to load app_pickupchan.so I receive following message: Module 'app_pickupchan.so' was not compiled with the same compile-time options as this version of Asterisk It was working fine until few time ago. What is going on? Thanks! Att, Flavio Roberto Miranda MSN:flaviormira...@hotmail.com Skype: flaviormiranda -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] pickup problem
Hi! Fabio == Fabio [EMAIL PROTECTED] writes: Fabio are you using canreinvite=yes on your SIP endpoints definition Fabio ? No, I'm using canreinvite=no. Fabio also check your features.conf, do you have pickupexten = *8 ? Yes it is: canopus*CLI show features Builtin Feature Default Current --- --- --- Pickup*8 *8 ... Thanks! -- DSS5-RIPE DSS-RIPN 2:550/[EMAIL PROTECTED] 2:550/[EMAIL PROTECTED] xmpp:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] http://neva.vlink.ru/~dsh/ ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] pickup problem
Hi! Could somebody help me with pickup feature? I've set callgroup = 1 pickupgroup = 1 for my phones in sip.conf, but if I try to pickup call with *8 asterisk output to console Jun 6 15:04:44 WARNING[11857]: pbx.c:2401 __ast_pbx_run: Invalid extension '*', but no rule 'i' in context 'office' Thanks! -- DSS5-RIPE DSS-RIPN 2:550/[EMAIL PROTECTED] 2:550/[EMAIL PROTECTED] xmpp:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] http://neva.vlink.ru/~dsh/ ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] pickup problem
Hi Denis, are you using canreinvite=yes on your SIP endpoints definition ? also check your features.conf, do you have pickupexten = *8 ? fabay -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] nombre de Denis Shaposhnikov Enviado el: Miércoles, 07 de Junio de 2006 03:42 a.m. Para: asterisk-users@lists.digium.com Asunto: [Asterisk-Users] pickup problem Hi! Could somebody help me with pickup feature? I've set callgroup = 1 pickupgroup = 1 for my phones in sip.conf, but if I try to pickup call with *8 asterisk output to console Jun 6 15:04:44 WARNING[11857]: pbx.c:2401 __ast_pbx_run: Invalid extension '*', but no rule 'i' in context 'office' Thanks! -- DSS5-RIPE DSS-RIPN 2:550/[EMAIL PROTECTED] 2:550/[EMAIL PROTECTED] xmpp:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] http://neva.vlink.ru/~dsh/ ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Pickup problem
Hi,I have the folowing setup:[incoming]exten = s,1,Wait(3)exten = s,2,Answerexten = s,3,Background(welcome)exten = 1,1,Noop(call for operators)exten = 1,2,Dial(SIP/10SIP/11|60|tr) exten = 1,3,Hungup;this is for pulse phones exten = t,1,NoOp(.call for .60)exten = t,2,Dial(SIP/10,60,mtr)exten = t,3,Background(busy-retrylater)exten = t,4,Hungup [take_call]exten = _6ZX,1,Background(pickup)exten = _6ZX,2,Pickup(${EXTEN:1})[sip_users]include = take_call;this is the context for sip usersNow when an incoming caller press 1 ... it cals sip 10 and sip 11. If me sip 22 want to pickup sip/10 or sip/11 by dialing 611 or 610 noting happends. On asterisk CLI says:-- Executing Pickup(SIP/22-e7f0, 11) in new stackAny ideea why it does'nt work? BTW on internal calls pickup works just fine. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Pickup problem
Bogdan Tocu wrote: Hi, I have the folowing setup: [incoming] exten = s,1,Wait(3) exten = s,2,Answer exten = s,3,Background(welcome) exten = 1,1,Noop(call for operators) exten = 1,2,Dial(SIP/10SIP/11|60|tr) exten = 1,3,Hungup ;this is for pulse phones exten = t,1,NoOp(.call for .60) exten = t,2,Dial(SIP/10,60,mtr) exten = t,3,Background(busy-retrylater) exten = t,4,Hungup [take_call] exten = _6ZX,1,Background(pickup) exten = _6ZX,2,Pickup(${EXTEN:1}) [sip_users] include = take_call ;this is the context for sip users Now when an incoming caller press 1 ... it cals sip 10 and sip 11. If me sip 22 want to pickup sip/10 or sip/11 by dialing 611 or 610 noting happends. On asterisk CLI says: -- Executing Pickup(SIP/22-e7f0, 11) in new stack Any ideea why it does'nt work? BTW on internal calls pickup works just fine. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users That's because the extension dialed was 1. Using the Pickup application you can't do a Pickup on the device called (ie: SIP/10 or SIP/11) but the extension, which is 1. -- Joshua Colp Software Developer Digium P - 256-428-6066 C - 506-878-0147 [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Pickup problem
Thank you, you are perfectly right..:) It's logic, but, didn't cross my mind.. On 5/31/06, Joshua Colp [EMAIL PROTECTED] wrote:Bogdan Tocu wrote: Hi, I have the folowing setup: [incoming] exten = s,1,Wait(3) exten = s,2,Answer exten = s,3,Background(welcome) exten = 1,1,Noop(call for operators) exten = 1,2,Dial(SIP/10SIP/11|60|tr) exten = 1,3,Hungup ;this is for pulse phones exten = t,1,NoOp(.call for .60) exten = t,2,Dial(SIP/10,60,mtr) exten = t,3,Background(busy-retrylater) exten = t,4,Hungup [take_call] exten = _6ZX,1,Background(pickup) exten = _6ZX,2,Pickup(${EXTEN:1}) [sip_users] include = take_call ;this is the context for sip users Now when an incoming caller press 1 ... it cals sip 10 and sip 11. If me sip 22 want to pickup sip/10 or sip/11 by dialing 611 or 610 noting happends. On asterisk CLI says:-- Executing Pickup(SIP/22-e7f0, 11) in new stack Any ideea why it does'nt work? BTW on internal calls pickup works just fine. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit:http://lists.digium.com/mailman/listinfo/asterisk-users That's because the extension dialed was 1. Using the Pickup applicationyou can't do a Pickup on the device called (ie: SIP/10 or SIP/11) butthe extension, which is 1.--Joshua ColpSoftware Developer DigiumP - 256-428-6066C - 506-878-0147[EMAIL PROTECTED]___--Bandwidth and Colocation provided by Easynews.com --Asterisk-Users mailing listTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] pickup problem
Ha -- this looks useful Just was trying to do a *8 on an IAXy phone...realized it didn't work across protocols If I implement this, I'll have to code in *8 into my extensions.conf instead of relying on the default built in 'steal' ? -- Chris - Original Message - From: Mimmus [EMAIL PROTECTED] To: 'Asterisk Users Mailing List - Non-Commercial Discussion' asterisk-users@lists.digium.com; [EMAIL PROTECTED] Sent: Monday, March 20, 2006 1:17 PM Subject: RE: [Asterisk-Users] pickup problem PickUp2: http://linux.thorsten-knabe.de/asterisk/pickup.jsp works very well. Mimmus -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tim Panton Sent: Monday, March 20, 2006 4:50 PM To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] pickup problem On 20 Mar 2006, at 15:39, Rich Adamson wrote: Mimmus wrote: -Original Message- From: [EMAIL PROTECTED] [mailto:asterisk- [EMAIL PROTECTED] On Behalf Of Rich Adamson Sent: Monday, March 20, 2006 4:06 PM there is also a more generic call pickup using 'callgroup=2' and 'pickupgroup=2' in your sip definitions. That approach uses *8 or *8# to pickup any ringing phone within the callgroup number (eg, 2 in this example). Does this call pickup work with IAX2? If yes, how, if there is no callgroup/pickupgroup setting in iax.conf? More in general: does call pickup work between different protocols? Never had a need to do pickup with iax, so don't have a clue. As I recall, the callgroup keyword only applies to sip and zap channels. It doesn't work between protocols. Tim Panton ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] pickup problem
Hello,I can pickup a call from a specific number:exten = _8XXX, 1, Pickup(${EXTEN:1})But i couldnt pickup calls coming from PSTN to local extensions.Another question is it possible to pickup the last calling number without any exten.Can you help me?erkaN Yahoo! Mail Use Photomail to share photos without annoying attachments.___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] pickup problem
erkan kolemen wrote: Hello, I can pickup a call from a specific number: exten = _8XXX, 1, Pickup(${EXTEN:1}) But i couldnt pickup calls coming from PSTN to local extensions. I'm using a dialplan entry like yours: exten = _*9,1,Pickup(${EXTEN:2}) and just tested it. Working fine using svn trunk as of yesterday. Another question is it possible to pickup the last calling number without any exten. Not sure what you're asking. Your example above is directed call pickup, but there is also a more generic call pickup using 'callgroup=2' and 'pickupgroup=2' in your sip definitions. That approach uses *8 or *8# to pickup any ringing phone within the callgroup number (eg, 2 in this example). ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] pickup problem
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Adamson Sent: Monday, March 20, 2006 4:06 PM there is also a more generic call pickup using 'callgroup=2' and 'pickupgroup=2' in your sip definitions. That approach uses *8 or *8# to pickup any ringing phone within the callgroup number (eg, 2 in this example). Does this call pickup work with IAX2? If yes, how, if there is no callgroup/pickupgroup setting in iax.conf? More in general: does call pickup work between different protocols? Thanks Mimmus ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] pickup problem
Mimmus wrote: -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Adamson Sent: Monday, March 20, 2006 4:06 PM there is also a more generic call pickup using 'callgroup=2' and 'pickupgroup=2' in your sip definitions. That approach uses *8 or *8# to pickup any ringing phone within the callgroup number (eg, 2 in this example). Does this call pickup work with IAX2? If yes, how, if there is no callgroup/pickupgroup setting in iax.conf? More in general: does call pickup work between different protocols? Never had a need to do pickup with iax, so don't have a clue. As I recall, the callgroup keyword only applies to sip and zap channels. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] pickup problem
On 20 Mar 2006, at 15:39, Rich Adamson wrote: Mimmus wrote: -Original Message- From: [EMAIL PROTECTED] [mailto:asterisk- [EMAIL PROTECTED] On Behalf Of Rich Adamson Sent: Monday, March 20, 2006 4:06 PM there is also a more generic call pickup using 'callgroup=2' and 'pickupgroup=2' in your sip definitions. That approach uses *8 or *8# to pickup any ringing phone within the callgroup number (eg, 2 in this example). Does this call pickup work with IAX2? If yes, how, if there is no callgroup/pickupgroup setting in iax.conf? More in general: does call pickup work between different protocols? Never had a need to do pickup with iax, so don't have a clue. As I recall, the callgroup keyword only applies to sip and zap channels. It doesn't work between protocols. Tim Panton [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] pickup problem
PickUp2: http://linux.thorsten-knabe.de/asterisk/pickup.jsp works very well. Mimmus -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tim Panton Sent: Monday, March 20, 2006 4:50 PM To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] pickup problem On 20 Mar 2006, at 15:39, Rich Adamson wrote: Mimmus wrote: -Original Message- From: [EMAIL PROTECTED] [mailto:asterisk- [EMAIL PROTECTED] On Behalf Of Rich Adamson Sent: Monday, March 20, 2006 4:06 PM there is also a more generic call pickup using 'callgroup=2' and 'pickupgroup=2' in your sip definitions. That approach uses *8 or *8# to pickup any ringing phone within the callgroup number (eg, 2 in this example). Does this call pickup work with IAX2? If yes, how, if there is no callgroup/pickupgroup setting in iax.conf? More in general: does call pickup work between different protocols? Never had a need to do pickup with iax, so don't have a clue. As I recall, the callgroup keyword only applies to sip and zap channels. It doesn't work between protocols. Tim Panton ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] pickup problem on Asterisk 1.2.4
I was wrong. The problem was with chan_sccp library and was solved downgrading from version 20060207 to 20060204. _fangi_ -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Per conto di Francesco Angi Inviato: venerdì 24 febbraio 2006 10.00 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: [Asterisk-Users] pickup problem on Asterisk 1.2.4 Solved the problem downgrading zaptel 1.2.4 to 1.2.3. Mantaining the same configurations now everything works fine. Regards, _fangi_ ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] pickup problem on Asterisk 1.2.4
Solved the problem downgrading zaptel 1.2.4 to 1.2.3. Mantaining the same configurations now everything works fine. Regards, _fangi_ -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Per conto di Francesco Angi Inviato: martedì 21 febbraio 2006 14.35 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: [Asterisk-Users] pickup problem on Asterisk 1.2.4 Hi everybody, I'm facing a strange problem after upgrading Asterisk from 1.0.9 to 1.2.4. Sometimes, when receiving an incoming call from pstn, although my sip phones ring correctly (I've got both softphones and hardware phones), noone can pick up the call. Asterisk CLI shows me that the phones are ringing, then nothing happens, so there's no problem _after_ someone picked up, simply Asterisk doesn't notice a phone picked up! Upgrading Asterisk I only did some changes to my dialplan, according to the upgrade page. My card is a TE110P, this is my zapata file: [channels] language=it context=default signalling=pri_cpe switchtype=euroisdn overlapdial=yes pridialplan = unknown prilocaldialplan = unknown nationalprefix = 0 internationalprefix = 00 echocancel=yes echotraining = 100 echocancelwhenbridged=yes immediate=no group=1 language=it musiconhold=default channel = 1-15,17-31 Thanks for help, _fangi_ ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] pickup problem on Asterisk 1.2.4
Hi everybody, I'm facing a strange problem after upgrading Asterisk from 1.0.9 to 1.2.4. Sometimes, when receiving an incoming call from pstn, although my sip phones ring correctly (I've got both softphones and hardware phones), noone can pick up the call. Asterisk CLI shows me that the phones are ringing, then nothing happens, so there's no problem _after_ someone picked up, simply Asterisk doesn't notice a phone picked up! Upgrading Asterisk I only did some changes to my dialplan, according to the upgrade page. My card is a TE110P, this is my zapata file: [channels] language=it context=default signalling=pri_cpe switchtype=euroisdn overlapdial=yes pridialplan = unknown prilocaldialplan = unknown nationalprefix = 0 internationalprefix = 00 echocancel=yes echotraining = 100 echocancelwhenbridged=yes immediate=no group=1 language=it musiconhold=default channel = 1-15,17-31 Thanks for help, _fangi_ ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Pickup problem
Hi, when i use the *8 for the call pickup the call i fetch is directly connected and i can't see the callers number. What i want is that the call in the first rings at my phone and in the second i can see the callers number. I am using a polycom 500 ip phone. Is this a special polycom problem? Regards, Kib ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users