Dear all.
I have a tdm400p with an FXO module in slot 4 and
an FXS module in slot 1.
I have not configured the FXS port in an attempt to
keep things simple.
The problem is that when I call the POTS number
(assigned by phone company) asterisk is seeing the call but then not doing
anything with it.
The verbose output from asterisk is as
follows:
--------------------------------------------------------------------------
*CLI>
== Starting post polarity CID detection on channel 4 -- Starting simple switch on 'Zap/4-1' May 19 15:10:29 NOTICE[30934]: chan_zap.c:5542 ss_thread: Got event 17 (Polarity Reversal)... May 19 15:10:31 WARNING[30934]: chan_zap.c:5582 ss_thread: CID timed out waiting for ring. Exiting simple switch -- Hungup 'Zap/4-1' ---------------------------------------------------------------------------
From the caller end it just rings
constantly.
I have the following configurations:
zaptel.conf
fxsks=4
loadzone=uk defaultzone=uk zapata.conf
; Zapata telephony interface
; Configuration file ; [channels] language=uk group=1 context=from-pstn signalling=fxs_ks channel => 4 extensions.conf
[from-pstn]
exten => s,1,Dial(SIP/1001,20) exten => s,2,Hangup The SIP elements of my system are working well, I
just need to get this incoming call on a POTS line working.
I have tried to keep things as simple as
possible.
Does anyone know why my call is not being handed to
my sip phone?
What is CID timed out waiting for ring? Is this
something to do with caller ID?
I have tried it with a 'wait' command in the
extensions.conf as well but no joy.
Kind regards
|
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users