Firdosh,
Don't contact digium as you will look stupid. Read the error.
First of all read the 'Readme' file sent by digium when you bought the
codec.
You have to give the command with your license code as the parameter as
under:
For Reregistration:
# ./register G729-1234ABCD
If you are registering a new key
or:
# ./register 1000FA-ABC123...
to re-register
Above is only an example. Use your key in place of the '1234XXX'
I am pasting what I have received from digium here:
Seshu
From: Nancy
To: Seshu Kanuri
Subject: The Asterisk Store Order asteriskpbx-5715
Date: Thu, 8 Jul 2004 15:50:49 -0500
Seshu,
Here are 50 channels for asteriskpbx-5715:
G729-0*E1
Readme File attached.
Thanks for your business,
Nancy Davidson
Digium
The Atrium Building
Suite 100
150 West Park Loop
Huntsville, Al 35806
[EMAIL PROTECTED]
G.729 support for Asterisk.
This file is the binary object for Digium's own G.729
implementation
and is NO LONGER based upon the Voiceage code (and its buggy
registration program). The new registration program should be
much
easier to use, less intrusive, and the codec is approximately
50%
faster
than the old Voiceage supplied one.
Download Instructions:
You may download the G.729 code binary from the following ftp
site:
ftp.digium.com/pub/asterisk/g729/
In that director y, you are presented with the choice of
glibc2 or
glibc_2_3.
In the glibc_2_3 directory, you will find the register utility
and
several
directories corresponding to different processor types. Please
download
the codec binary that corresponds to your processor type.
In the glibc2 directory, you will find the register utility as
built
for
older
glibc's. You may use this utility along with the codec
binaries found
in
the glibc_2_3 processor sub-directories.
Important Bug Fixes:
1) There no longer is a problem with running the registration
program
or the codec on a SCSI system.
2) There is no longer a problem starting asterisk in the
background
with
the G.729 code running.
Important Notes:
1) The registration key is tied to the MAC addresses of *all*
ethernet
cards in your system. If you change any ethernet cards
(including
adding or removing them) you will need to re-register. Please
be aware
that you can only re-register a key *one* time unless you
contact
Digium.
2) Copy the codec_g729a.so file to /usr/lib/asterisk/modules
and
remove the old voiceage codec_g729b.so if you have it
installed.
Leaving both will not let you use you channels twice.
3) Run the registration code, placing your key after
executable like
this:
# ./register G729-1234ABCD
if you are registering a new key
or:
# ./register 1000FA-ABC123...
if you are registering your old Voiceage key with the
new codec
and keeping in mind that the key is case sensitive.
6) Start Asterisk normally.
If you have any questions or concerns, please contact Digium
toll free
at
877-LINUX-ME (or 256-428-6000) or via e-mail at
[EMAIL PROTECTED]
OTHER NOTES:
You do not have to explicitly load codec_g729a.so in your
/etc/asterisk/modules.conf file. Asterisk will load it
automatically.
If you do list the codec in the modules.conf file, then you
will also
have
to explicitly load res_crypto.so.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Daniel
Eboa
Sent: Wednesday, April 13, 2005 11:52 AM
To: Mohammed Firdosh Nasim; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: RE: [Asterisk-Users]Unable to register license for G729 codec
Contact Digium For this issue
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mohammed
Firdosh Nasim
Sent: mercredi 13 avril 2005 16:12
To: asterisk-users@lists.digium.com
Cc: Mohammed Firdosh Nasim
Subject: [Asterisk-Users]Unable to register license for G729 codec
Hi,
I bought the license for codec g.729a from digium and am now facing some
problem registering the codec with them.
i got the following message
