Re: [asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!)
On Wed, Dec 22, 2010 at 04:48:33PM +0100, Giorgio Incantalupo wrote: > Hi all, > > thanks for answering. > > You all are right but I do not really need the codec because my phones > and my Voip lines are all working using g729. I assume you do not need it as you stated. In this case, configure your VoIP lines not to use g729. Problem solved. > Asterisk is working fine > without transcoding as well.the problem is my CLI is flooded with > messages like: > WARNING[7831] translate.c: No translator path from alaw to unknown > which are quite annoying...aren't they? Asterisk is complaining because it *does* need a g729 codec. > Should I pay to avoid a CLI message? Patching it out should be simple. But you'd still miss the audio. > That doesn't sound fair to me. As I just mentioned: you'd be missing some audio. -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!)
On Wednesday 22 December 2010 12:20:36 Olivier wrote: > 2010/12/22 Bryant Zimmerman > > > Giorgio > > > > You could buy just a couple of licenses 3 to 5. It would get rid of > > the messages for the most part and it would give you the ability to > > transcode for voicemails and other items requiring transcode. The > > reason you are likely getting the messages is there is some kind of > > transcode required that it can't do and you are getting the warring. > > If you shut off all in the middle functions like recording, > > voicemail, and feature codes you may be able to get rid of them but > > you would also loose the functions. You will likely waste more than > > the $30 to $50 dollars in time and you get the option to transcode to > > boot. Just my 2 cents. > > Mayba I'm hijacking this thread, but what about virtual machines ? > > At the moment, let say you're using an hardware platform on which you > launch virtual machines (one per project but only one at a time). > > Would a single licence be usable on each virtual machine (same > (virtualized?) processor and mac addresses) ? No, because each virtual machine gets its own virtualized Ethernet MAC address. -- Tilghman -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!)
My understanding is that you need one license for every channel it's being used on, regardless of whether the server is physical or virtual. On Wed, Dec 22, 2010 at 12:20 PM, Olivier wrote: > > 2010/12/22 Bryant Zimmerman >> >> Giorgio >> >> You could buy just a couple of licenses 3 to 5. It would get rid of the >> messages for the most part and it would give you the ability to transcode >> for voicemails and other items requiring transcode. The reason you are >> likely getting the messages is there is some kind of transcode required that >> it can't do and you are getting the warring. If you shut off all in the >> middle functions like recording, voicemail, and feature codes you may be >> able to get rid of them but you would also loose the functions. You will >> likely waste more than the $30 to $50 dollars in time and you get the option >> to transcode to boot. Just my 2 cents. >> > > Mayba I'm hijacking this thread, but what about virtual machines ? > > At the moment, let say you're using an hardware platform on which you launch > virtual machines (one per project but only one at a time). > > Would a single licence be usable on each virtual machine (same > (virtualized?) processor and mac addresses) ? > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!)
2010/12/22 Bryant Zimmerman > Giorgio > > You could buy just a couple of licenses 3 to 5. It would get rid of the > messages for the most part and it would give you the ability to transcode > for voicemails and other items requiring transcode. The reason you are > likely getting the messages is there is some kind of transcode required that > it can't do and you are getting the warring. If you shut off all in the > middle functions like recording, voicemail, and feature codes you may be > able to get rid of them but you would also loose the functions. You will > likely waste more than the $30 to $50 dollars in time and you get the option > to transcode to boot. Just my 2 cents. > > Mayba I'm hijacking this thread, but what about virtual machines ? At the moment, let say you're using an hardware platform on which you launch virtual machines (one per project but only one at a time). Would a single licence be usable on each virtual machine (same (virtualized?) processor and mac addresses) ? -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!)
On Wed, Dec 22, 2010 at 9:48 AM, Giorgio Incantalupo wrote: > Hi all, > > thanks for answering. > > You all are right but I do not really need the codec because my phones and > my Voip lines are all working using g729. Asterisk is working fine without > transcoding as well.the problem is my CLI is flooded with messages like: > WARNING[7831] translate.c: No translator path from alaw to unknown > which are quite annoying...aren't they? > Should I pay to avoid a CLI message? That doesn't sound fair to me. > I know I should report the problem but the "fake" codec seemed the faster > way. Hmm...potentially infringing on a patent or adding a noload directive to modules.conf. It's a toss up! ;) -Michael -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!)
Giorgio You could buy just a couple of licenses 3 to 5. It would get rid of the messages for the most part and it would give you the ability to transcode for voicemails and other items requiring transcode. The reason you are likely getting the messages is there is some kind of transcode required that it can't do and you are getting the warring. If you shut off all in the middle functions like recording, voicemail, and feature codes you may be able to get rid of them but you would also loose the functions. You will likely waste more than the $30 to $50 dollars in time and you get the option to transcode to boot. Just my 2 cents. From: "Giorgio Incantalupo" Sent: Wednesday, December 22, 2010 11:17 AM To: "Asterisk Users Mailing List - Non-Commercial Discussion" Subject: Re: [asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!) Hi all, thanks for answering. You all are right but I do not really need the codec because my phones and my Voip lines are all working using g729. Asterisk is working fine without transcoding as well.the problem is my CLI is flooded with messages like: WARNING[7831] translate.c: No translator path from alaw to unknown which are quite annoying...aren't they? Should I pay to avoid a CLI message? That doesn't sound fair to me. I know I should report the problem but the "fake" codec seemed the faster way. Giorgio Incantalupo Giorgio Incantalupo wrote: > pbx18*CLI> module load codec_g729-ast14-gcc4-glibc-pentium3.so > Unable to load module codec_g729-ast14-gcc4-glibc-pentium3.so > Command 'module load codec_g729-ast14-gcc4-glibc-pentium3.so ' failed. > [Dec 22 15:52:45] WARNING[4491]: loader.c:757 inspect_module: Module > 'codec_g729-ast14-gcc4-glibc-pentium3.so' does not provide a license key. > [Dec 22 15:52:45] WARNING[4491]: loader.c:852 load_resource: Module > 'codec_g729-ast14-gcc4-glibc-pentium3.so' could not be loaded. > > It worked on Asterisk 1.4, but not anymore on my Asterisk > 1.8...why??? :( > > Thank you > > Giorgio Incantalupo > > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!)
-Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Giorgio Incantalupo Sent: Wednesday, December 22, 2010 9:49 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!) Hi all, thanks for answering. You all are right but I do not really need the codec because my phones and my Voip lines are all working using g729. Asterisk is working fine without transcoding as well.the problem is my CLI is flooded with messages like: WARNING[7831] translate.c: No translator path from alaw to unknown which are quite annoying...aren't they? Should I pay to avoid a CLI message? That doesn't sound fair to me. I know I should report the problem but the "fake" codec seemed the faster way. Giorgio Incantalupo Why don't you just modify that piece of code to kill the warning? Are you using a "canned" Asterisk (AsteriskNow/FreePBX/etc)? -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!)
Hi MrHanMan, you are right...and the mistake is so stupid I've already solved itwhat a slip! :) This means I really need a long relaxing period on some exotic island...or in some cold prison since I'm using an illegal codec!!! :) Still I do not believe why Asterisk had not complained for a different version module instead of asking for a license. Should I report this weirdness? Btw thank you for your time. Giorgio Incantalupo P.S.: as I've already written in some other post, I use the criminal codec to test Voip lines without the need to install the license every time and to avoid a noisy message flooding my CLI. MrHanMan wrote: I don't think a module compiled for Asterisk 1.4 will work with any other Asterisk version. On Wed, Dec 22, 2010 at 8:58 AM, Giorgio Incantalupo wrote: pbx18*CLI> module load codec_g729-ast14-gcc4-glibc-pentium3.so Unable to load module codec_g729-ast14-gcc4-glibc-pentium3.so Command 'module load codec_g729-ast14-gcc4-glibc-pentium3.so ' failed. [Dec 22 15:52:45] WARNING[4491]: loader.c:757 inspect_module: Module 'codec_g729-ast14-gcc4-glibc-pentium3.so' does not provide a license key. [Dec 22 15:52:45] WARNING[4491]: loader.c:852 load_resource: Module 'codec_g729-ast14-gcc4-glibc-pentium3.so' could not be loaded. It worked on Asterisk 1.4, but not anymore on my Asterisk 1.8...why??? :( Thank you Giorgio Incantalupo -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!)
Hi all, thanks for answering. You all are right but I do not really need the codec because my phones and my Voip lines are all working using g729. Asterisk is working fine without transcoding as well.the problem is my CLI is flooded with messages like: WARNING[7831] translate.c: No translator path from alaw to unknown which are quite annoying...aren't they? Should I pay to avoid a CLI message? That doesn't sound fair to me. I know I should report the problem but the "fake" codec seemed the faster way. Giorgio Incantalupo Giorgio Incantalupo wrote: pbx18*CLI> module load codec_g729-ast14-gcc4-glibc-pentium3.so Unable to load module codec_g729-ast14-gcc4-glibc-pentium3.so Command 'module load codec_g729-ast14-gcc4-glibc-pentium3.so ' failed. [Dec 22 15:52:45] WARNING[4491]: loader.c:757 inspect_module: Module 'codec_g729-ast14-gcc4-glibc-pentium3.so' does not provide a license key. [Dec 22 15:52:45] WARNING[4491]: loader.c:852 load_resource: Module 'codec_g729-ast14-gcc4-glibc-pentium3.so' could not be loaded. It worked on Asterisk 1.4, but not anymore on my Asterisk 1.8...why??? :( Thank you Giorgio Incantalupo -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!)
To my knowledge there is currently no free version of the g729 codec. There were some spec builds but those were just for testing if I recall correctly. Each version of the codec that we have always gotten has been compiled for each version of asterisk. I would just buy the Digium licenses for the codec and not mess with it. That way you are legal and have support if you need it. From: "Joel Maslak" Sent: Wednesday, December 22, 2010 10:23 AM To: "Asterisk Users Mailing List - Non-Commercial Discussion" Subject: Re: [asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!) I'm going to guess you aren't going to get a lot of help on a list hosted by Digium on how to use a potentially illegal codec... That said, "ast14" in the filename might signify what the problem is. The APIs likely changed for modules between 1.4 and 1.8. On Wed, Dec 22, 2010 at 7:58 AM, Giorgio Incantalupo wrote: > pbx18*CLI> module load codec_g729-ast14-gcc4-glibc-pentium3.so > Unable to load module codec_g729-ast14-gcc4-glibc-pentium3.so > Command 'module load codec_g729-ast14-gcc4-glibc-pentium3.so ' failed. > [Dec 22 15:52:45] WARNING[4491]: loader.c:757 inspect_module: Module > 'codec_g729-ast14-gcc4-glibc-pentium3.so' does not provide a license key. > [Dec 22 15:52:45] WARNING[4491]: loader.c:852 load_resource: Module > 'codec_g729-ast14-gcc4-glibc-pentium3.so' could not be loaded. > > It worked on Asterisk 1.4, but not anymore on my Asterisk 1.8...why??? > :( > > Thank you > > Giorgio Incantalupo > > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!)
I don't think a module compiled for Asterisk 1.4 will work with any other Asterisk version. On Wed, Dec 22, 2010 at 8:58 AM, Giorgio Incantalupo wrote: > pbx18*CLI> module load codec_g729-ast14-gcc4-glibc-pentium3.so > Unable to load module codec_g729-ast14-gcc4-glibc-pentium3.so > Command 'module load codec_g729-ast14-gcc4-glibc-pentium3.so ' failed. > [Dec 22 15:52:45] WARNING[4491]: loader.c:757 inspect_module: Module > 'codec_g729-ast14-gcc4-glibc-pentium3.so' does not provide a license key. > [Dec 22 15:52:45] WARNING[4491]: loader.c:852 load_resource: Module > 'codec_g729-ast14-gcc4-glibc-pentium3.so' could not be loaded. > > It worked on Asterisk 1.4, but not anymore on my Asterisk 1.8...why??? > :( > > Thank you > > Giorgio Incantalupo > > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!)
I'm going to guess you aren't going to get a lot of help on a list hosted by Digium on how to use a potentially illegal codec... That said, "ast14" in the filename might signify what the problem is. The APIs likely changed for modules between 1.4 and 1.8. On Wed, Dec 22, 2010 at 7:58 AM, Giorgio Incantalupo wrote: > pbx18*CLI> module load codec_g729-ast14-gcc4-glibc-pentium3.so > Unable to load module codec_g729-ast14-gcc4-glibc-pentium3.so > Command 'module load codec_g729-ast14-gcc4-glibc-pentium3.so ' failed. > [Dec 22 15:52:45] WARNING[4491]: loader.c:757 inspect_module: Module > 'codec_g729-ast14-gcc4-glibc-pentium3.so' does not provide a license key. > [Dec 22 15:52:45] WARNING[4491]: loader.c:852 load_resource: Module > 'codec_g729-ast14-gcc4-glibc-pentium3.so' could not be loaded. > > It worked on Asterisk 1.4, but not anymore on my Asterisk 1.8...why??? > :( > > Thank you > > Giorgio Incantalupo > > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!)
pbx18*CLI> module load codec_g729-ast14-gcc4-glibc-pentium3.so Unable to load module codec_g729-ast14-gcc4-glibc-pentium3.so Command 'module load codec_g729-ast14-gcc4-glibc-pentium3.so ' failed. [Dec 22 15:52:45] WARNING[4491]: loader.c:757 inspect_module: Module 'codec_g729-ast14-gcc4-glibc-pentium3.so' does not provide a license key. [Dec 22 15:52:45] WARNING[4491]: loader.c:852 load_resource: Module 'codec_g729-ast14-gcc4-glibc-pentium3.so' could not be loaded. It worked on Asterisk 1.4, but not anymore on my Asterisk 1.8...why??? :( Thank you Giorgio Incantalupo -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
