Re: [asterisk-users] Audiocodes MP-114 2FXO/2FXS help registering with Asterisk

2009-12-27 Thread Joseph
I was able to register only one FXO port by setting in:
Protocol Definition -> Proxy & Registration:
Proxy Name: 10.0.0.109
Registrar IP Address: 10.0.0.109
User Name: pstn-5665
Password: 147

But how do I register other FXO and tow FXS ports?
When I trying to enter in:
Endpoint Settings -> Authentication:
Port 2  FXS  369  523
Port 4  FXO  pstn-5665  147

Once I remove the setting 
User Name: pstn-5665
Password: 147
from:  Proxy & Registration registration fails.


Here is my part from sip.conf:

[369] ; internal extension FXS
type=friend
host=dynamic
context=internal
secret=523
username=369
mailbox=369
disallow=all 
allow=ulaw  
allow=alaw  
canreinvite=yes
nat=no
callgroup=1
pickupgroup=1

[pstn-5665] ; FXO 
type=friend
secret=147
username=pstn-5665
host=dynamic
canreinvite=yes
disallow=all
allow=ulaw  
allow=alaw  
nat=no
context=incoming
callgroup=1
pickupgroup=1

-- 
Joseph

___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


Re: [asterisk-users] Audiocodes MP-114 2FXO/2FXS help registering with Asterisk

2009-12-27 Thread Joseph
On 12/27/09 12:10, Joseph wrote:
>On 12/27/09 09:58, Jonathan Thurman wrote:
>>The best document is the two page quick start guide that came in the
>>box. You want 5.6, and 5.8 should be out soon if you are an early
>>adopter.
>>
>>-Jonathan
>
>The two page quick start does not work. I've follow the instruction in there, 
>it is simple and straight forward but does not work with asterisk.
>

I've found good instruction at:
http://lists.digium.com/pipermail/asterisk-biz/2006-May/014626.html
It seems simple and straight forward but I still get:
Registration from '' failed for '10.0.0.157' - Wrong 
password

Is this Audiocodes so complicated?

-- 
Joseph

___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


Re: [asterisk-users] Audiocodes MP-114 2FXO/2FXS help registering with Asterisk

2009-12-27 Thread Joseph
On 12/27/09 09:58, Jonathan Thurman wrote:
>The best document is the two page quick start guide that came in the
>box. You want 5.6, and 5.8 should be out soon if you are an early
>adopter.
>
>-Jonathan

The two page quick start does not work. I've follow the instruction in there, 
it is simple and straight forward but does not work with asterisk.


-- 
Joseph

___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


Re: [asterisk-users] Audiocodes MP-114 2FXO/2FXS help registering with Asterisk

2009-12-27 Thread Joseph
I've emailed my provider Scansouce Communication to provide me with the newer 
firmware version but for now I'm trying to setup so I can at least register it 
with asterisk.
Can you email me your INI file, I'll compare it to mine.
I'm trying to register both ports with FXO and FXS with Asterisk.

--
Joseph

On 12/27/09 09:58, Jonathan Thurman wrote:
>The best document is the two page quick start guide that came in the
>box. You want 5.6, and 5.8 should be out soon if you are an early
>adopter.
>
>-Jonathan


___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


Re: [asterisk-users] Audiocodes MP-114 2FXO/2FXS help registering with Asterisk

2009-12-27 Thread Jonathan Thurman
The best document is the two page quick start guide that came in the  
box. You want 5.6, and 5.8 should be out soon if you are an early  
adopter.

-Jonathan

Sent from a mobile device.

On Dec 27, 2009, at 9:02 AM, Joseph  wrote:

> What what everybody says, it is a good hardware but configuration  
> samples are not easy to find and going through 500page manual is not  
> easy.
> What they are missing is short configuration guide with samples for  
> specific software like asterisk.
> My software version is 5.40A I see early next week what is the  
> latest available.
>
> On 12/27/09 07:56, Jonathan Thurman wrote:
>> The web interface is a bit confusing at first.  Here are some of the
>> steps that I remember off hand.  Change as little as possible, makes
>> it easier to troubleshoot later.
>
> I did not change much and trying to register just one line first,  
> but is not easy all I'm getting is:
> chan_sip.c:15593 handle_request_register: Registration from ' 3...@10.0.0.109>' failed for '10.0.0.157' - Wrong password
>
> 369 is my extension, 10.0.0.109 is my Asterisk server, 10.0.0.157 is  
> AudioCodes IP
>
>>
>> Get the latest code from your vendor (5.6 is what I run)
>>
>> Configure the proxy to register with
>> Configuration -> Protocol Config -> Protocol Def -> Proxy and  
>> Registration
>>   - Enable registration
>>   - Set the registration per endpoint
>
> So I have
> Use Default Proxy: Yes
> Proxy Set Table: ==> What did you enter here (I enter: 10.0.0.109  
> UDP; do I need to set: Enable Proxy Keep Alive?)
>
> Proxy Name: 10.0.0.109
>
> The below two settings (what to put in there, setting from sip.conf:  
> eg.: but which one?
> Registrar Name
> Registrar IP Address
>
> Under:
> Gateway Name (I entered asterisk IP) 10.0.0.109
>
> Again below is:
> User Name
> Password
> Not sure what to put in above.
>
>>
>> Configure your call routing
>> Configuration -> Protocol Config -> Routing Tables -> IP to Trunk  
>> Group
>
> Is above sections for routing calls to asterisk?
>
>>
>> If you send a prefix for outgoing calls, you will need to configure
>> that in the manipulation table too
>> Configuration -> Protocol Config -> Manipulation tables -> Dest
>> number IP to Tel
>
> No, I don't use prefixes they are dropped by asterisk; so I  
> configured single stage dialing under:
> Advanced Applications -> FXO Settings -> Dialing Mode
>
>>
>> Configure authentication
>> Configuration -> Protocol Config -> Endpoint settings ->  
>> Authentication
>
> Here I entered authentication from one of my sip.conf entry: [369]
> [369] ; outgoing/incoming call on fxs port
> type=friend
> host=dynamic
> context=internal
> secret=523
> username=369
> mailbox=369
> ;dtmfmode=rfc2833
> ;dtmfmode=inband
> disallow=all
> allow=ulaw
> allow=alaw
> canreinvite=yes
> nat=no
> callgroup=1
> pickupgroup=1
>
>>
>> Now the part that took me a while to find...
>>
>> Configure the Channel to phone number mapping:
>> Configuration -> Protocol Config -> Endpoint  Number -> EndPoint  
>> Phone Number
>>
>> Configure the Hunt group settings
>> Configuration -> Protocol Config -> Hunt/IP Group -> Hunt group  
>> settings
>>
>>
>> Hope that helps.  These are great devices, once you figure out how to
>> get them configured...
>>
>> -Jonathan
>
> I need to find out from the manual what these setting do.
> I was hoping to find some setting reference on Wiki but there are  
> none :-/ it seems to me the device is not very popular among  
> asterisk users, if it was
> somebody would create detailed configuration for asterisk.
>
> --
> Joseph
>
> ___
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users

___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


Re: [asterisk-users] Audiocodes MP-114 2FXO/2FXS help registering with Asterisk

2009-12-27 Thread Joseph
What what everybody says, it is a good hardware but configuration samples are 
not easy to find and going through 500page manual is not easy.
What they are missing is short configuration guide with samples for specific 
software like asterisk.
My software version is 5.40A I see early next week what is the latest available.

On 12/27/09 07:56, Jonathan Thurman wrote:
>The web interface is a bit confusing at first.  Here are some of the
>steps that I remember off hand.  Change as little as possible, makes
>it easier to troubleshoot later.

I did not change much and trying to register just one line first, but is not 
easy all I'm getting is:
chan_sip.c:15593 handle_request_register: Registration from 
'' failed for '10.0.0.157' - Wrong password

369 is my extension, 10.0.0.109 is my Asterisk server, 10.0.0.157 is AudioCodes 
IP

>
>Get the latest code from your vendor (5.6 is what I run)
>
>Configure the proxy to register with
>  Configuration -> Protocol Config -> Protocol Def -> Proxy and Registration
>- Enable registration
>- Set the registration per endpoint

So I have 
Use Default Proxy: Yes
Proxy Set Table: ==> What did you enter here (I enter: 10.0.0.109 UDP; do I 
need to set: Enable Proxy Keep Alive?)

Proxy Name: 10.0.0.109

The below two settings (what to put in there, setting from sip.conf: eg.: but 
which one?
Registrar Name  
Registrar IP Address

Under:
Gateway Name (I entered asterisk IP) 10.0.0.109

Again below is:
User Name   
Password
Not sure what to put in above.

>
>Configure your call routing
>  Configuration -> Protocol Config -> Routing Tables -> IP to Trunk Group

Is above sections for routing calls to asterisk? 

>
>If you send a prefix for outgoing calls, you will need to configure
>that in the manipulation table too
>  Configuration -> Protocol Config -> Manipulation tables -> Dest
>number IP to Tel

No, I don't use prefixes they are dropped by asterisk; so I configured single 
stage dialing under:
Advanced Applications -> FXO Settings -> Dialing Mode

>
>Configure authentication
>  Configuration -> Protocol Config -> Endpoint settings -> Authentication

Here I entered authentication from one of my sip.conf entry: [369]
[369] ; outgoing/incoming call on fxs port
type=friend
host=dynamic
context=internal
secret=523
username=369
mailbox=369
;dtmfmode=rfc2833
;dtmfmode=inband
disallow=all 
allow=ulaw   
allow=alaw 
canreinvite=yes
nat=no
callgroup=1
pickupgroup=1

>
>Now the part that took me a while to find...
>
>Configure the Channel to phone number mapping:
>  Configuration -> Protocol Config -> Endpoint  Number -> EndPoint Phone Number
>
>Configure the Hunt group settings
>  Configuration -> Protocol Config -> Hunt/IP Group -> Hunt group settings
>
>
>Hope that helps.  These are great devices, once you figure out how to
>get them configured...
>
>-Jonathan

I need to find out from the manual what these setting do.
I was hoping to find some setting reference on Wiki but there are none :-/ it 
seems to me the device is not very popular among asterisk users, if it was 
somebody would create detailed configuration for asterisk.

--
Joseph

___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


Re: [asterisk-users] Audiocodes MP-114 2FXO/2FXS help registering with Asterisk

2009-12-27 Thread Jonathan Thurman
The web interface is a bit confusing at first.  Here are some of the
steps that I remember off hand.  Change as little as possible, makes
it easier to troubleshoot later.

Get the latest code from your vendor (5.6 is what I run)

Configure the proxy to register with
  Configuration -> Protocol Config -> Protocol Def -> Proxy and Registration
- Enable registration
- Set the registration per endpoint

Configure your call routing
  Configuration -> Protocol Config -> Routing Tables -> IP to Trunk Group

If you send a prefix for outgoing calls, you will need to configure
that in the manipulation table too
  Configuration -> Protocol Config -> Manipulation tables -> Dest
number IP to Tel

Configure authentication
  Configuration -> Protocol Config -> Endpoint settings -> Authentication

Now the part that took me a while to find...

Configure the Channel to phone number mapping:
  Configuration -> Protocol Config -> Endpoint  Number -> EndPoint Phone Number

Configure the Hunt group settings
  Configuration -> Protocol Config -> Hunt/IP Group -> Hunt group settings


Hope that helps.  These are great devices, once you figure out how to
get them configured...

-Jonathan


On Sat, Dec 26, 2009 at 11:39 PM, Joseph  wrote:
> I have AudioCodes MP-2FXO/2FXS but have a problem registering it with 
> Asterisk.
> Any links or pointers to configuration how it is done?
>
> --
> Joseph
>
> ___
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


[asterisk-users] Audiocodes MP-114 2FXO/2FXS help registering with Asterisk

2009-12-26 Thread Joseph
I have AudioCodes MP-2FXO/2FXS but have a problem registering it with Asterisk.
Any links or pointers to configuration how it is done?

-- 
Joseph

___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users