Re: [asterisk-users] E1 configuration
dear flaviormiranda thanks for your kind of help. I want to know this part( mfcr2 ) what does it mean? signalling=mfcr2 mfcr2_variant=br mfcr2_get_ani_first=no mfcr2_max_ani=20 mfcr2_max_dnis=4 mfcr2_category=national_subscriber mfcr2_logdir=span1 mfcr2_call_files=yes mfcr2_logging=all mfcr2_mfback_timeout=-1 mfcr2_metering_pulse_timeout=-1 mfcr2_allow_collect_calls=yes mfcr2_double_answer=no mfcr2_immediate_accept=yes mfcr2_forced_release=no mfcr2_charge_calls=yes If i want to install te121p on elastix what should i do? best regards On Wed, Oct 27, 2010 at 3:18 AM, Flavio Miranda wrote: > Hi, > > /etc/dahdi/system.conf > > > Att,# Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER) HDB3/ > > > span=1,1,0,cas,hdb3 > cas=1-15:1101 > dchan=16 > cas=17-31:1101 > #echocanceller=mg2,1-15,17-31 > > /etc/asterisk/chan_dahdi.conf > > > [trunkgroups] > > > [channels] > > > usecallerid=yes > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > signalling=mfcr2 > mfcr2_variant=br > mfcr2_get_ani_first=no > mfcr2_max_ani=20 > mfcr2_max_dnis=4 > mfcr2_category=national_subscriber > mfcr2_logdir=span1 > mfcr2_call_files=yes > mfcr2_logging=all > mfcr2_mfback_timeout=-1 > mfcr2_metering_pulse_timeout=-1 > mfcr2_allow_collect_calls=yes > mfcr2_double_answer=no > mfcr2_immediate_accept=yes > mfcr2_forced_release=no > mfcr2_charge_calls=yes > ;language=pt_BR > context=Saida-de-ligacoes > group=0 > callgroup=0 > pickupgroup=0 > channel => 1-15,17-31 > immediate=no > #include dahdi-channels.conf > > > /etc/asterisk/dahdi-channels.conf > > ; Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER) HDB3/ > group=0,11 > context=Saida-de-ligacoes > switchtype = national > signalling = pri_cpe > channel => 1-15,17-31 > context = default > group = 63 > > > > Flavio Roberto Miranda > MSN:flaviormira...@hotmail.com > Skype: flaviormiranda > > > > -- > Date: Wed, 27 Oct 2010 00:15:01 +0330 > > From: seighal...@gmail.com > To: asterisk-users@lists.digium.com > Subject: Re: [asterisk-users] E1 configuration > > dear > > please send these configurations. > > > thanks > > > > On Tue, Oct 26, 2010 at 3:04 PM, Flavio Miranda < > flaviormira...@hotmail.com> wrote: > > hi, > > So, I think it depend of what environment are you setting up your link . In > my case, E1 R2 Digital Brazil standard (Variant=br), I needed to change > dahdi-channels parameter,chan_dahdi.conf , system.conf as well. > > > If you need I can send you such configuration. > > good look! > > > > > > > Att, > > Flavio Roberto Miranda > MSN:flaviormira...@hotmail.com > Skype: flaviormiranda > > > > -- > Date: Tue, 26 Oct 2010 14:24:13 +0330 > From: seighal...@gmail.com > > To: asterisk-users@lists.digium.com > Subject: Re: [asterisk-users] E1 configuration > > hi my friend > > would ou say what did you do for solving the problem? because i use a > digium te121p and have many problems. > > > thanks in advance > > > > > On Mon, Oct 25, 2010 at 4:50 PM, Flavio Miranda < > flaviormira...@hotmail.com> wrote: > > Sorry, thats right!! > I the nest email I will post here what I did in order to sove my problem! > > > Att, > > Flavio Roberto Miranda > MSN:flaviormira...@hotmail.com > Skype: flaviormiranda > > > > -- > Date: Sun, 24 Oct 2010 23:59:27 -0700 > From: shakeel.abbas@gmail.com > > To: asterisk-users@lists.digium.com > Subject: Re: [asterisk-users] E1 configuration > > > although I don't need the solution personally But would like to request you > that instead of posting "forget it" . if you post the solution to the > problem it will be more helpful. > In case some one else faces the same problem he can use your solution > > Good luck > > On Sun, Oct 24, 2010 at 7:10 PM, Flavio Miranda < > flaviormira...@hotmail.com> wrote: > > Forget it !! > > > After several attempts, I have solved !!! > > > Att, > > Flavio Roberto Miranda > MSN:flaviormira...@hotmail.com > Skype: flaviormiranda > > > > -- > From: flaviormira...@hotmail.com > To: asterisk-users@lists.digium.com > Date: Sun, 24 Oct 2010 22:28:16 -0200 > Subject: [asterisk-users] E1 configuration > &g
Re: [asterisk-users] E1 configuration
Hi, /etc/dahdi/system.conf Att,# Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER) HDB3/ span=1,1,0,cas,hdb3cas=1-15:1101dchan=16cas=17-31:1101#echocanceller=mg2,1-15,17-31 /etc/asterisk/chan_dahdi.conf [trunkgroups] [channels] usecallerid=yescallwaiting=yesusecallingpres=yescallwaitingcallerid=yesthreewaycalling=yestransfer=yescanpark=yescancallforward=yescallreturn=yesechocancel=yesechocancelwhenbridged=yessignalling=mfcr2mfcr2_variant=brmfcr2_get_ani_first=nomfcr2_max_ani=20mfcr2_max_dnis=4mfcr2_category=national_subscribermfcr2_logdir=span1mfcr2_call_files=yesmfcr2_logging=allmfcr2_mfback_timeout=-1mfcr2_metering_pulse_timeout=-1mfcr2_allow_collect_calls=yesmfcr2_double_answer=nomfcr2_immediate_accept=yesmfcr2_forced_release=nomfcr2_charge_calls=yes;language=pt_BRcontext=Saida-de-ligacoesgroup=0callgroup=0pickupgroup=0channel => 1-15,17-31immediate=no#include dahdi-channels.conf /etc/asterisk/dahdi-channels.conf ; Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER) HDB3/group=0,11context=Saida-de-ligacoesswitchtype = nationalsignalling = pri_cpechannel => 1-15,17-31context = defaultgroup = 63 Flavio Roberto Miranda MSN:flaviormira...@hotmail.com Skype: flaviormiranda Date: Wed, 27 Oct 2010 00:15:01 +0330 From: seighal...@gmail.com To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] E1 configuration dear please send these configurations. thanks On Tue, Oct 26, 2010 at 3:04 PM, Flavio Miranda wrote: hi, So, I think it depend of what environment are you setting up your link . In my case, E1 R2 Digital Brazil standard (Variant=br), I needed to change dahdi-channels parameter,chan_dahdi.conf , system.conf as well. If you need I can send you such configuration. good look! Att, Flavio Roberto Miranda MSN:flaviormira...@hotmail.com Skype: flaviormiranda Date: Tue, 26 Oct 2010 14:24:13 +0330 From: seighal...@gmail.com To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] E1 configuration hi my friend would ou say what did you do for solving the problem? because i use a digium te121p and have many problems. thanks in advance On Mon, Oct 25, 2010 at 4:50 PM, Flavio Miranda wrote: Sorry, thats right!! I the nest email I will post here what I did in order to sove my problem! Att, Flavio Roberto Miranda MSN:flaviormira...@hotmail.com Skype: flaviormiranda Date: Sun, 24 Oct 2010 23:59:27 -0700 From: shakeel.abbas@gmail.com To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] E1 configuration although I don't need the solution personally But would like to request you that instead of posting "forget it" . if you post the solution to the problem it will be more helpful. In case some one else faces the same problem he can use your solution Good luck On Sun, Oct 24, 2010 at 7:10 PM, Flavio Miranda wrote: Forget it !! After several attempts, I have solved !!! Att, Flavio Roberto Miranda MSN:flaviormira...@hotmail.com Skype: flaviormiranda From: flaviormira...@hotmail.com To: asterisk-users@lists.digium.com Date: Sun, 24 Oct 2010 22:28:16 -0200 Subject: [asterisk-users] E1 configuration Hi all, Please, anybody that have some knowllege about E1 configuration could give some guidance about it? I trying to set an Asterisk with E1 CAS signalling and everything looks good, but when I try to go out with calls I receive the follow message: == Using SIP RTP CoS mark 5 -- Executing [21341...@local:1] Dial("SIP/4804-", "DAHDI/g11/21341400,,t") in new stack == Everyone is busy/congested at this time (1:0/0/1) == Spawn extension (local, 21341400, 2) exited non-zero on 'SIP/4804-' The boad has succesfully installed: Digium Wildcard TE110P T1/E1 Card 0 OK 0 0 0 CAS HDB3 0 db (CSU)/0-133 feet (DSX-1) the channels are correct and mfcr2 too, but the calls dont go out. Thanks for any help. Att, Flavio Roberto Miranda MSN:flaviormira...@hotmail.com Skype: flaviormiranda -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Best Regards Shakeel Abbas --
Re: [asterisk-users] E1 configuration
dear please send these configurations. thanks On Tue, Oct 26, 2010 at 3:04 PM, Flavio Miranda wrote: > hi, > > So, I think it depend of what environment are you setting up your link . In > my case, E1 R2 Digital Brazil standard (Variant=br), I needed to change > dahdi-channels parameter,chan_dahdi.conf , system.conf as well. > > > If you need I can send you such configuration. > > good look! > > > > > > > Att, > > Flavio Roberto Miranda > MSN:flaviormira...@hotmail.com > Skype: flaviormiranda > > > > -- > Date: Tue, 26 Oct 2010 14:24:13 +0330 > From: seighal...@gmail.com > > To: asterisk-users@lists.digium.com > Subject: Re: [asterisk-users] E1 configuration > > hi my friend > > would ou say what did you do for solving the problem? because i use a > digium te121p and have many problems. > > > thanks in advance > > > > > On Mon, Oct 25, 2010 at 4:50 PM, Flavio Miranda < > flaviormira...@hotmail.com> wrote: > > Sorry, thats right!! > I the nest email I will post here what I did in order to sove my problem! > > > Att, > > Flavio Roberto Miranda > MSN:flaviormira...@hotmail.com > Skype: flaviormiranda > > > > ------ > Date: Sun, 24 Oct 2010 23:59:27 -0700 > From: shakeel.abbas@gmail.com > > To: asterisk-users@lists.digium.com > Subject: Re: [asterisk-users] E1 configuration > > > although I don't need the solution personally But would like to request you > that instead of posting "forget it" . if you post the solution to the > problem it will be more helpful. > In case some one else faces the same problem he can use your solution > > Good luck > > On Sun, Oct 24, 2010 at 7:10 PM, Flavio Miranda < > flaviormira...@hotmail.com> wrote: > > Forget it !! > > > After several attempts, I have solved !!! > > > Att, > > Flavio Roberto Miranda > MSN:flaviormira...@hotmail.com > Skype: flaviormiranda > > > > -- > From: flaviormira...@hotmail.com > To: asterisk-users@lists.digium.com > Date: Sun, 24 Oct 2010 22:28:16 -0200 > Subject: [asterisk-users] E1 configuration > > > Hi all, > > Please, anybody that have some knowllege about E1 configuration could > give some guidance about it? > > I trying to set an Asterisk with E1 CAS signalling and everything looks > good, but when I try to go out with calls I receive the follow message: > > == Using SIP RTP CoS mark 5 > -- Executing [21341...@local:1] Dial("SIP/4804-", > "DAHDI/g11/21341400,,t") in new stack > == Everyone is busy/congested at this time (1:0/0/1) > == Spawn extension (local, 21341400, 2) exited non-zero on > 'SIP/4804-' > > The boad has succesfully installed: > > Digium Wildcard TE110P T1/E1 Card 0 OK 0 0 0 CAS > HDB3 0 db (CSU)/0-133 feet (DSX-1) > > the channels are correct and mfcr2 too, but the calls dont go out. > > Thanks for any help. > > > > Att, > > Flavio Roberto Miranda > MSN:flaviormira...@hotmail.com > Skype: flaviormiranda > > > -- _ -- > Bandwidth and Colocation Provided by http://www.api-digital.com -- New to > Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE > or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > -- > Best Regards > Shakeel Abbas > > > -- _ -- > Bandwidth and Colocation Provided by http://www.api-digital.com -- New to > Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE > or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs:
Re: [asterisk-users] E1 configuration
hi, So, I think it depend of what environment are you setting up your link . In my case, E1 R2 Digital Brazil standard (Variant=br), I needed to change dahdi-channels parameter,chan_dahdi.conf , system.conf as well. If you need I can send you such configuration. good look! Att, Flavio Roberto Miranda MSN:flaviormira...@hotmail.com Skype: flaviormiranda Date: Tue, 26 Oct 2010 14:24:13 +0330 From: seighal...@gmail.com To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] E1 configuration hi my friend would ou say what did you do for solving the problem? because i use a digium te121p and have many problems. thanks in advance On Mon, Oct 25, 2010 at 4:50 PM, Flavio Miranda wrote: Sorry, thats right!! I the nest email I will post here what I did in order to sove my problem! Att, Flavio Roberto Miranda MSN:flaviormira...@hotmail.com Skype: flaviormiranda Date: Sun, 24 Oct 2010 23:59:27 -0700 From: shakeel.abbas@gmail.com To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] E1 configuration although I don't need the solution personally But would like to request you that instead of posting "forget it" . if you post the solution to the problem it will be more helpful. In case some one else faces the same problem he can use your solution Good luck On Sun, Oct 24, 2010 at 7:10 PM, Flavio Miranda wrote: Forget it !! After several attempts, I have solved !!! Att, Flavio Roberto Miranda MSN:flaviormira...@hotmail.com Skype: flaviormiranda From: flaviormira...@hotmail.com To: asterisk-users@lists.digium.com Date: Sun, 24 Oct 2010 22:28:16 -0200 Subject: [asterisk-users] E1 configuration Hi all, Please, anybody that have some knowllege about E1 configuration could give some guidance about it? I trying to set an Asterisk with E1 CAS signalling and everything looks good, but when I try to go out with calls I receive the follow message: == Using SIP RTP CoS mark 5 -- Executing [21341...@local:1] Dial("SIP/4804-", "DAHDI/g11/21341400,,t") in new stack == Everyone is busy/congested at this time (1:0/0/1) == Spawn extension (local, 21341400, 2) exited non-zero on 'SIP/4804-' The boad has succesfully installed: Digium Wildcard TE110P T1/E1 Card 0 OK 0 0 0 CAS HDB3 0 db (CSU)/0-133 feet (DSX-1) the channels are correct and mfcr2 too, but the calls dont go out. Thanks for any help. Att, Flavio Roberto Miranda MSN:flaviormira...@hotmail.com Skype: flaviormiranda -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Best Regards Shakeel Abbas -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- free is to know that you have a different option -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users
Re: [asterisk-users] E1 configuration
hi my friend would ou say what did you do for solving the problem? because i use a digium te121p and have many problems. thanks in advance On Mon, Oct 25, 2010 at 4:50 PM, Flavio Miranda wrote: > Sorry, thats right!! > I the nest email I will post here what I did in order to sove my problem! > > > Att, > > Flavio Roberto Miranda > MSN:flaviormira...@hotmail.com > Skype: flaviormiranda > > > > -- > Date: Sun, 24 Oct 2010 23:59:27 -0700 > From: shakeel.abbas@gmail.com > > To: asterisk-users@lists.digium.com > Subject: Re: [asterisk-users] E1 configuration > > > although I don't need the solution personally But would like to request you > that instead of posting "forget it" . if you post the solution to the > problem it will be more helpful. > In case some one else faces the same problem he can use your solution > > Good luck > > On Sun, Oct 24, 2010 at 7:10 PM, Flavio Miranda < > flaviormira...@hotmail.com> wrote: > > Forget it !! > > > After several attempts, I have solved !!! > > > Att, > > Flavio Roberto Miranda > MSN:flaviormira...@hotmail.com > Skype: flaviormiranda > > > > ---------- > From: flaviormira...@hotmail.com > To: asterisk-users@lists.digium.com > Date: Sun, 24 Oct 2010 22:28:16 -0200 > Subject: [asterisk-users] E1 configuration > > > Hi all, > > Please, anybody that have some knowllege about E1 configuration could > give some guidance about it? > > I trying to set an Asterisk with E1 CAS signalling and everything looks > good, but when I try to go out with calls I receive the follow message: > > == Using SIP RTP CoS mark 5 > -- Executing [21341...@local:1] Dial("SIP/4804-", > "DAHDI/g11/21341400,,t") in new stack > == Everyone is busy/congested at this time (1:0/0/1) > == Spawn extension (local, 21341400, 2) exited non-zero on > 'SIP/4804-' > > The boad has succesfully installed: > > Digium Wildcard TE110P T1/E1 Card 0 OK 0 0 0 CAS > HDB3 0 db (CSU)/0-133 feet (DSX-1) > > the channels are correct and mfcr2 too, but the calls dont go out. > > Thanks for any help. > > > > Att, > > Flavio Roberto Miranda > MSN:flaviormira...@hotmail.com > Skype: flaviormiranda > > > -- _ -- > Bandwidth and Colocation Provided by http://www.api-digital.com -- New to > Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE > or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > -- > Best Regards > Shakeel Abbas > > > -- _ -- > Bandwidth and Colocation Provided by http://www.api-digital.com -- New to > Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE > or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- free is to know that you have a different option -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] E1 configuration
Sorry, thats right!! I the nest email I will post here what I did in order to sove my problem! Att, Flavio Roberto Miranda MSN:flaviormira...@hotmail.com Skype: flaviormiranda Date: Sun, 24 Oct 2010 23:59:27 -0700 From: shakeel.abbas@gmail.com To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] E1 configuration although I don't need the solution personally But would like to request you that instead of posting "forget it" . if you post the solution to the problem it will be more helpful. In case some one else faces the same problem he can use your solution Good luck On Sun, Oct 24, 2010 at 7:10 PM, Flavio Miranda wrote: Forget it !! After several attempts, I have solved !!! Att, Flavio Roberto Miranda MSN:flaviormira...@hotmail.com Skype: flaviormiranda From: flaviormira...@hotmail.com To: asterisk-users@lists.digium.com Date: Sun, 24 Oct 2010 22:28:16 -0200 Subject: [asterisk-users] E1 configuration Hi all, Please, anybody that have some knowllege about E1 configuration could give some guidance about it? I trying to set an Asterisk with E1 CAS signalling and everything looks good, but when I try to go out with calls I receive the follow message: == Using SIP RTP CoS mark 5 -- Executing [21341...@local:1] Dial("SIP/4804-", "DAHDI/g11/21341400,,t") in new stack == Everyone is busy/congested at this time (1:0/0/1) == Spawn extension (local, 21341400, 2) exited non-zero on 'SIP/4804-' The boad has succesfully installed: Digium Wildcard TE110P T1/E1 Card 0 OK 0 0 0 CAS HDB3 0 db (CSU)/0-133 feet (DSX-1) the channels are correct and mfcr2 too, but the calls dont go out. Thanks for any help. Att, Flavio Roberto Miranda MSN:flaviormira...@hotmail.com Skype: flaviormiranda -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Best Regards Shakeel Abbas -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] E1 configuration
although I don't need the solution personally But would like to request you that instead of posting "forget it" . if you post the solution to the problem it will be more helpful. In case some one else faces the same problem he can use your solution Good luck On Sun, Oct 24, 2010 at 7:10 PM, Flavio Miranda wrote: > Forget it !! > > > After several attempts, I have solved !!! > > > Att, > > Flavio Roberto Miranda > MSN:flaviormira...@hotmail.com > Skype: flaviormiranda > > > > -- > From: flaviormira...@hotmail.com > To: asterisk-users@lists.digium.com > Date: Sun, 24 Oct 2010 22:28:16 -0200 > Subject: [asterisk-users] E1 configuration > > > Hi all, > > Please, anybody that have some knowllege about E1 configuration could > give some guidance about it? > > I trying to set an Asterisk with E1 CAS signalling and everything looks > good, but when I try to go out with calls I receive the follow message: > > == Using SIP RTP CoS mark 5 > -- Executing [21341...@local:1] Dial("SIP/4804-", > "DAHDI/g11/21341400,,t") in new stack > == Everyone is busy/congested at this time (1:0/0/1) > == Spawn extension (local, 21341400, 2) exited non-zero on > 'SIP/4804-' > > The boad has succesfully installed: > > Digium Wildcard TE110P T1/E1 Card 0 OK 0 0 0 CAS > HDB3 0 db (CSU)/0-133 feet (DSX-1) > > the channels are correct and mfcr2 too, but the calls dont go out. > > Thanks for any help. > > > > Att, > > Flavio Roberto Miranda > MSN:flaviormira...@hotmail.com > Skype: flaviormiranda > > > -- _ -- > Bandwidth and Colocation Provided by http://www.api-digital.com -- New to > Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE > or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Best Regards Shakeel Abbas -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] E1 configuration
Forget it !! After several attempts, I have solved !!! Att, Flavio Roberto Miranda MSN:flaviormira...@hotmail.com Skype: flaviormiranda From: flaviormira...@hotmail.com To: asterisk-users@lists.digium.com Date: Sun, 24 Oct 2010 22:28:16 -0200 Subject: [asterisk-users] E1 configuration Hi all, Please, anybody that have some knowllege about E1 configuration could give some guidance about it? I trying to set an Asterisk with E1 CAS signalling and everything looks good, but when I try to go out with calls I receive the follow message: == Using SIP RTP CoS mark 5-- Executing [21341...@local:1] Dial("SIP/4804-", "DAHDI/g11/21341400,,t") in new stack == Everyone is busy/congested at this time (1:0/0/1) == Spawn extension (local, 21341400, 2) exited non-zero on 'SIP/4804-' The boad has succesfully installed: Digium Wildcard TE110P T1/E1 Card 0 OK 0 0 0 CAS HDB3 0 db (CSU)/0-133 feet (DSX-1) the channels are correct and mfcr2 too, but the calls dont go out. Thanks for any help. Att, Flavio Roberto Miranda MSN:flaviormira...@hotmail.com Skype: flaviormiranda -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] E1 configuration
Hi all, Please, anybody that have some knowllege about E1 configuration could give some guidance about it? I trying to set an Asterisk with E1 CAS signalling and everything looks good, but when I try to go out with calls I receive the follow message: == Using SIP RTP CoS mark 5-- Executing [21341...@local:1] Dial("SIP/4804-", "DAHDI/g11/21341400,,t") in new stack == Everyone is busy/congested at this time (1:0/0/1) == Spawn extension (local, 21341400, 2) exited non-zero on 'SIP/4804-' The boad has succesfully installed: Digium Wildcard TE110P T1/E1 Card 0 OK 0 0 0 CAS HDB3 0 db (CSU)/0-133 feet (DSX-1) the channels are correct and mfcr2 too, but the calls dont go out. Thanks for any help. Att, Flavio Roberto Miranda MSN:flaviormira...@hotmail.com Skype: flaviormiranda -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] E1 configuration problem
Please, send us zaptel.conf and zapata.conf and say us what card you have(TE110P, TE410P...). And what is your country. Regards, srsergio -Mensaje original- De: manish kumar [mailto:[EMAIL PROTECTED] Enviado el: lunes, 19 de septiembre de 2005 6:32 Para: asterisk-users@lists.digium.com Asunto: [Asterisk-Users] E1 configuration problem I am trying to configure E1 card (Digium) but not able to do that. The green light doesn't come up when it starts. What can be the problem. I have also changed the jumper settings of the card from T1 to E1 but still no relief. Thanks in advance Manish ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.25/102 - Release Date: 14/09/2005 ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] E1 configuration problem
Hi, First of all make sure you have inserted zaptel and wxfx* modules and Then execute ztcfg -vvv It will show you the channels configured and see its green signal now. :) Regards Gurminder On 9/19/05, manish kumar <[EMAIL PROTECTED]> wrote: > I am trying to configure E1 card (Digium) but not able to do that. The > green light doesn't come up when it starts. > > What can be the problem. I have also changed the jumper settings of the > card from T1 to E1 but still no relief. > > Thanks in advance > > Manish > > ___ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] E1 configuration problem
I am trying to configure E1 card (Digium) but not able to do that. The green light doesn't come up when it starts. What can be the problem. I have also changed the jumper settings of the card from T1 to E1 but still no relief. Thanks in advance Manish ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
R: [Asterisk-Users] E1 configuration problem
-Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Per conto di Christian Victor Inviato: martedì 26 ottobre 2004 13.57 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: Re: [Asterisk-Users] E1 configuration problem > I'm trying to configurate my first asterisk system. > > My test plant has an E100P Card and a 4 FXS TDM 400P card. > > I've an E1 configured for 15 channels. > Telco says that crc4 is configurated so my zaptel.conf is: > > loadzone = it > defaultzone=it > span=1,0,0,ccs,hdb3,crc4 > bchan=1-15 > dchan=16 > unused=17-31 > fxoks=32-35 > zttool shows no alarms. > > > I've also tried changing the timing configuration. > > > == Primary D-Channel on span 1 up > == Primary D-Channel on span 1 up > Oct 26 14:15:56 WARNING[11275]: chan_zap.c:7133 zt_pri_error: PRI: !! > Not good - head of queue has not been transmitted yet > == Primary D-Channel on span 1 down > Oct 26 14:15:57 WARNING[11275]: chan_zap.c:1913 pri_find_dchan: No > D-channels available! Using Primary on channel anyway 16! > Does anyone have any idea what's wrong ? >Maybe your E1 is configured for CAS not CCS. At least that caused a similar error for >me. I've tried but the card signals a RED ALERT error. The only configuration without card errors is ccs,hdb3 Thanks for your suggestion. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] E1 configuration problem
I'm trying to configurate my first asterisk system. My test plant has an E100P Card and a 4 FXS TDM 400P card. I've an E1 configured for 15 channels. Telco says that crc4 is configurated so my zaptel.conf is: loadzone = it defaultzone=it span=1,0,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 unused=17-31 fxoks=32-35 zttool shows no alarms. I've also tried changing the timing configuration. == Primary D-Channel on span 1 up == Primary D-Channel on span 1 up Oct 26 14:15:56 WARNING[11275]: chan_zap.c:7133 zt_pri_error: PRI: !! Not good - head of queue has not been transmitted yet == Primary D-Channel on span 1 down Oct 26 14:15:57 WARNING[11275]: chan_zap.c:1913 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16! Does anyone have any idea what's wrong ? Maybe your E1 is configured for CAS not CCS. At least that caused a similar error for me. Chris ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] E1 configuration problem
Hi ! I'm trying to configurate my first asterisk system. My test plant has an E100P Card and a 4 FXS TDM 400P card. I've an E1 configured for 15 channels. Telco says that crc4 is configurated so my zaptel.conf is: loadzone = itdefaultzone=it span=1,0,0,ccs,hdb3,crc4bchan=1-15dchan=16 unused=17-31 fxoks=32-35 zttool shows no alarms. I've also tried changing the timing configuration. == Primary D-Channel on span 1 up == Primary D-Channel on span 1 up Oct 26 14:15:56 WARNING[11275]: chan_zap.c:7133 zt_pri_error: PRI: !! Not good - head of queue has not been transmitted yet == Primary D-Channel on span 1 downOct 26 14:15:57 WARNING[11275]: chan_zap.c:1913 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16! Does anyone have any idea what's wrong ? Thank you. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users