Thanks to the OpenVox engineer for picking this up: I had "bri_cpe" for my signaling type, should be "bri_cpe_ptmp". The BRI circuit on the B200P works fine now in both directions.
-Scott On 6/22/2010 7:58 AM, Scott Stingel wrote: > > On 6/22/2010 2:03 AM, Tzafrir Cohen wrote: > >> On Mon, Jun 21, 2010 at 09:08:02AM -0700, Scott Stingel wrote: >> >> >>> Hello- >>> >>> I have a system with one D410P and one B200P (both OpenVox). All is >>> well with the D410P, inbound and outbound, and I can initiate calls on >>> the B200P BRI span, but there may be something wrong with my inbound >>> BRI setup: there is no indication of an inbound call when I dial in to >>> it from the PSTN. >>> >>> When I run "pri intense debug" and make a call to the BRI span, I can >>> see a message containing the DDI that I'm dialing, in this case 336027 >>> (BT supplies only the last 6 digits of a delivered number). See debug >>> output below... >>> >>> >> -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users