Re: [asterisk-users] How to install and configure Dahdi from Debian Stretch repo ?

[Tzafrir Cohen]

On Tue, Mar 21, 2017 at 05:18:50PM +0100, Steinwendtner wrote:
> Hello Tzafrir,
> 
> Am 2017-03-21 um 11:23 schrieb Tzafrir Cohen:
> > On Tue, Mar 21, 2017 at 09:36:21AM +0100, Olivier wrote:
> >
> > I'm still having some questions:
> >
> > 1. I can't find any /etc/init.d/dahdi file in my newly built system so
> > "service dahdi status" (or systemctl status dahdi) fails with:
> > Unit dahdi.service could not be found.
> > Shall I worry about this ?
> > No. As I mentioned, that is meaningless.
> So it is no longer possible to make changes on dahdi parameters
> without rebooting the machine ?

There should be no need for a reboot. Long live your system.

> 
> I think in the early days it was possible something like this:
> 
> make a change in /etc/dahdi/system.conf

What kind of change? Technically it would only take running 'dahdi_cfg'
to apply that change. However that may not be enough. Depending on the
specific change.

> asterisk -rx "module unload chan_dahdi.so"
> service dahdi stop
> service dahdi start
> asterisk -rx "module load chan_dahdi.so"

It only got faster. No need to deconfigure anything in Asterisk (This
happens on its own. At least on Asterisk >= 13). No need to unload and
re-load any modules (And why would you? Just to run dahdi_cfg?).

But anyway, if merely running dahdi_cfg is not enough, try:

  dahdi_span_assignment remove
  dahdi_span_assignment add # or: auto

This should also configure DAHDI and register spans with Asterisk
(again: >= 13). If there are still problems with asterisk:

  asterisk -rx "dahdi restart"

-- 
   Tzafrir Cohen
+972-50-7952406   mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com

-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] How to install and configure Dahdi from Debian Stretch repo ?

[Steinwendtner]

Hello Tzafrir,

Am 2017-03-21 um 11:23 schrieb Tzafrir Cohen:
> On Tue, Mar 21, 2017 at 09:36:21AM +0100, Olivier wrote:
>
> I'm still having some questions:
>
> 1. I can't find any /etc/init.d/dahdi file in my newly built system so
> "service dahdi status" (or systemctl status dahdi) fails with:
> Unit dahdi.service could not be found.
> Shall I worry about this ?
> No. As I mentioned, that is meaningless.
So it is no longer possible to make changes on dahdi parameters
without rebooting the machine ?

I think in the early days it was possible something like this:

make a change in /etc/dahdi/system.conf
asterisk -rx "module unload chan_dahdi.so"
service dahdi stop
service dahdi start
asterisk -rx "module load chan_dahdi.so"

Regards

Hans

-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] How to install and configure Dahdi from Debian Stretch repo ?

[Tzafrir Cohen]

On Tue, Mar 21, 2017 at 09:36:21AM +0100, Olivier wrote:
> Thanks to Tzafrir help, Now I have an Asterisk-Dahdi system installed from
> Stretch repository.
> This system has a Digium HX8 card with BRI modules, Asterisk 13.14.0, Dahdi
> 2.11.1.
> BRI spans appears as up and active but I've not tested them yet:
> CLI> pri show spans
> PRI span 1/0: Up, Active
> PRI span 2/0: Up, Active
> PRI span 3/0: Up, Active
> 
> 
> I'm still having some questions:
> 
> 1. I can't find any /etc/init.d/dahdi file in my newly built system so
> "service dahdi status" (or systemctl status dahdi) fails with:
> Unit dahdi.service could not be found.
> Shall I worry about this ?

No. As I mentioned, that is meaningless.

There are various commands that show the status at various levels:

lsmod | grep ^wctdm24xxp
dahdi_hardware | grep 'wctdm24xxp\+'
dahdi_span_assignments list
lsdahdi
asterisk -rx 'pri show spans'

What exactly do you consider as "status of dahdi"?

> 
> 2. Where can Dahdi 2.11.1 Changelog file be found ?
> In http://downloads.asterisk.org/pub/telephony/ ?

git log #?

The tarball has no changelog and thus it is not packaged. Sorry.

-- 
   Tzafrir Cohen
+972-50-7952406   mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com

-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] How to install and configure Dahdi from Debian Stretch repo ?

[Olivier]

Thanks to Tzafrir help, Now I have an Asterisk-Dahdi system installed from
Stretch repository.
This system has a Digium HX8 card with BRI modules, Asterisk 13.14.0, Dahdi
2.11.1.
BRI spans appears as up and active but I've not tested them yet:
CLI> pri show spans
PRI span 1/0: Up, Active
PRI span 2/0: Up, Active
PRI span 3/0: Up, Active


I'm still having some questions:

1. I can't find any /etc/init.d/dahdi file in my newly built system so
"service dahdi status" (or systemctl status dahdi) fails with:
Unit dahdi.service could not be found.
Shall I worry about this ?

2. Where can Dahdi 2.11.1 Changelog file be found ?
In http://downloads.asterisk.org/pub/telephony/ ?

Best regards


2017-03-20 16:25 GMT+01:00 Olivier :

>
>
> 2017-03-14 15:26 GMT+01:00 Tzafrir Cohen :
>
>> On Tue, Mar 14, 2017 at 02:58:07PM +0100, Olivier wrote:
>> > 2017-03-14 13:08 GMT+01:00 Tzafrir Cohen :
>> >
>> > > On Tue, Mar 14, 2017 at 11:10:57AM +0100, Olivier wrote:
>> > > > Hello,
>> > > >
>> > > > After all these years installing from source, I'm giving Dahdi
>> package
>> > > > installation a try on a recent Stretch box.
>> > > >
>> > > > Google over the web, I didn't find too many doc on this topic.
>> > > >
>> > > > 1. Is this one [1] up-to-date ?
>> > >
>> > > Not exactly.
>> > >
>> > > > Reading Stretch I would say a single asterisk-dahdi would be enough
>> to
>> > > > install asterisk dahdi and libpri.
>> > >
>> > > Almost. Except the kernel modules. For those:
>> > >
>> > >   apt install dahdi-source
>> > >   # also install module-assistant, if it wasn't installed already
>> > >   m-a a-i dahdi
>> > >   # Should also install linux-headers-`uname -r`, IIRC
>> > >
>> > > >
>> > > > 2. On my box, the following fails. What would you suggest ? Re-base
>> > > > everything on Jessie ?
>> > > > apt-get install linux-headers-`uname -r`
>> > >
>> > > That should not happen. What is the output of uname -r #?
>> > >
>> >
>> > # uname -r
>> > 4.8.0-2-686-pae
>> >
>> > # apt-get install linux-headers-`uname -r`
>> > ...
>> > E: Couldn't find any package by glob 'linux-headers-4.8.0-2-686-pae'
>> >
>> > # apt-cache show linux-headers-4.8
>> > ...
>> > N: Couldn't find any package by glob 'linux-headers-4.8'
>> > ...
>> >
>> > # apt-cache show linux-headers-4.9
>> > Package: linux-headers-4.9.0-2-686
>> > Source: linux
>> > ...
>> >
>> > It looks like linux-headers-4.8 are currently missing in Stretch repo
>> > though currently installed kernel is 4.8.
>> > This issue seems quite independant from asterisk, anyway.
>>
>> You probably started working on this box a while ago. Streetch's current
>> kernel is 4.9.0-2 (it changed shortly before the freeze). It is now
>> frozen and won't change (barring a really good reason).
>>
>> >
>> >
>> > I started all over with a Jessie box.
>>
>> I recommend to go back to Stretch and just upgrade the kernel. In other
>> words: keep the software up-to-date.
>>
>> > Relating to [1], I could positively run:
>> > # m-a a-i dahdi
>> > ...
>> >
>> > But # dahdi_genconf required a reboot to run OK.
>>
>> Certainly not. See below.
>>
>> > Though this worries me as I need to script the whole install process, I
>> can
>> > leave it aside at the moment.
>> >
>> >
>> >
>> > > >
>> > > > 3. How is dahdi started-stopped in Stretch ? (I can't find any
>> > > > /etc/init.d/dahdi file after apt-get install asterisk-dahdi).
>> > >
>> > > Started: should be automatically at boot.
>> >
>> >
>> > Shall I find an /etc/init.d/dahdi file or equivalent ?
>> > If positive which command produces this file ?
>> > I would expect dahdi-linux or dahdi packages to install these file.
>> >
>> >
>> > > Waht hardware device do you
>> > > have?
>> > >
>> >
>> > # dahdi_hardware
>> > pci::04:05.0 wctdm24xxp+  d161:8007 HA8-
>>
>> Traditionally dahdi has been shipped with a modprobe.d configuration
>> file to blacklist all of the PCI cards. This was because the order in
>> which they were loaded was not well-defined.
>>
>> This is irrelevant on a system with a single device. And anyway,
>> irrelevant in a system configured (as is in the Debian packages) with
>> auto_assign_spans=0 . In such a system, devices register automatically,
>> but their spans are not assigned span and channel numbers unless they
>> are configured in /etc/dahdi/assigned-spans.conf .
>>
>> So try:
>>
>>   dahdi_span_assignment auto
>>   dahdi_genconf
>>
>>
>
> This "dahdi_span_assignments auto" stratement was missing in my
> installation script.
>
> This one is now:
>
>
> DAHDI_MODULES="wctdm24xxp"
> apt-get -s install asterisk-dahdi module-assistant
> linux-headers-$(uname -r) dahdi-source
> m-a a-i dahdi
> modprobe ${DAHDI_MODULES}
> dahdi_span_assignments auto
>
> ... edit asterisk and dahdi config files
>
> dahdi_cfg -v
>
> Thank you very much for letting me know about this dahdi_span_assignments
> command.
>
> May I add I've still got no 

Re: [asterisk-users] How to install and configure Dahdi from Debian Stretch repo ?

[Olivier]

2017-03-14 15:26 GMT+01:00 Tzafrir Cohen :

> On Tue, Mar 14, 2017 at 02:58:07PM +0100, Olivier wrote:
> > 2017-03-14 13:08 GMT+01:00 Tzafrir Cohen :
> >
> > > On Tue, Mar 14, 2017 at 11:10:57AM +0100, Olivier wrote:
> > > > Hello,
> > > >
> > > > After all these years installing from source, I'm giving Dahdi
> package
> > > > installation a try on a recent Stretch box.
> > > >
> > > > Google over the web, I didn't find too many doc on this topic.
> > > >
> > > > 1. Is this one [1] up-to-date ?
> > >
> > > Not exactly.
> > >
> > > > Reading Stretch I would say a single asterisk-dahdi would be enough
> to
> > > > install asterisk dahdi and libpri.
> > >
> > > Almost. Except the kernel modules. For those:
> > >
> > >   apt install dahdi-source
> > >   # also install module-assistant, if it wasn't installed already
> > >   m-a a-i dahdi
> > >   # Should also install linux-headers-`uname -r`, IIRC
> > >
> > > >
> > > > 2. On my box, the following fails. What would you suggest ? Re-base
> > > > everything on Jessie ?
> > > > apt-get install linux-headers-`uname -r`
> > >
> > > That should not happen. What is the output of uname -r #?
> > >
> >
> > # uname -r
> > 4.8.0-2-686-pae
> >
> > # apt-get install linux-headers-`uname -r`
> > ...
> > E: Couldn't find any package by glob 'linux-headers-4.8.0-2-686-pae'
> >
> > # apt-cache show linux-headers-4.8
> > ...
> > N: Couldn't find any package by glob 'linux-headers-4.8'
> > ...
> >
> > # apt-cache show linux-headers-4.9
> > Package: linux-headers-4.9.0-2-686
> > Source: linux
> > ...
> >
> > It looks like linux-headers-4.8 are currently missing in Stretch repo
> > though currently installed kernel is 4.8.
> > This issue seems quite independant from asterisk, anyway.
>
> You probably started working on this box a while ago. Streetch's current
> kernel is 4.9.0-2 (it changed shortly before the freeze). It is now
> frozen and won't change (barring a really good reason).
>
> >
> >
> > I started all over with a Jessie box.
>
> I recommend to go back to Stretch and just upgrade the kernel. In other
> words: keep the software up-to-date.
>
> > Relating to [1], I could positively run:
> > # m-a a-i dahdi
> > ...
> >
> > But # dahdi_genconf required a reboot to run OK.
>
> Certainly not. See below.
>
> > Though this worries me as I need to script the whole install process, I
> can
> > leave it aside at the moment.
> >
> >
> >
> > > >
> > > > 3. How is dahdi started-stopped in Stretch ? (I can't find any
> > > > /etc/init.d/dahdi file after apt-get install asterisk-dahdi).
> > >
> > > Started: should be automatically at boot.
> >
> >
> > Shall I find an /etc/init.d/dahdi file or equivalent ?
> > If positive which command produces this file ?
> > I would expect dahdi-linux or dahdi packages to install these file.
> >
> >
> > > Waht hardware device do you
> > > have?
> > >
> >
> > # dahdi_hardware
> > pci::04:05.0 wctdm24xxp+  d161:8007 HA8-
>
> Traditionally dahdi has been shipped with a modprobe.d configuration
> file to blacklist all of the PCI cards. This was because the order in
> which they were loaded was not well-defined.
>
> This is irrelevant on a system with a single device. And anyway,
> irrelevant in a system configured (as is in the Debian packages) with
> auto_assign_spans=0 . In such a system, devices register automatically,
> but their spans are not assigned span and channel numbers unless they
> are configured in /etc/dahdi/assigned-spans.conf .
>
> So try:
>
>   dahdi_span_assignment auto
>   dahdi_genconf
>
>

This "dahdi_span_assignments auto" stratement was missing in my
installation script.

This one is now:


DAHDI_MODULES="wctdm24xxp"
apt-get -s install asterisk-dahdi module-assistant
linux-headers-$(uname -r) dahdi-source
m-a a-i dahdi
modprobe ${DAHDI_MODULES}
dahdi_span_assignments auto

... edit asterisk and dahdi config files

dahdi_cfg -v

Thank you very much for letting me know about this dahdi_span_assignments
command.

May I add I've still got no /etc/init.d/dahdi file or equivalent though
dahdi channels seems OK within Asterisk ?
I'll learn a bit deeper into dahdi_span_assignments to clarify my further
questions, if any.
-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] How to install and configure Dahdi from Debian Stretch repo ?

[Tzafrir Cohen]

On Tue, Mar 14, 2017 at 02:58:07PM +0100, Olivier wrote:
> 2017-03-14 13:08 GMT+01:00 Tzafrir Cohen :
> 
> > On Tue, Mar 14, 2017 at 11:10:57AM +0100, Olivier wrote:
> > > Hello,
> > >
> > > After all these years installing from source, I'm giving Dahdi package
> > > installation a try on a recent Stretch box.
> > >
> > > Google over the web, I didn't find too many doc on this topic.
> > >
> > > 1. Is this one [1] up-to-date ?
> >
> > Not exactly.
> >
> > > Reading Stretch I would say a single asterisk-dahdi would be enough to
> > > install asterisk dahdi and libpri.
> >
> > Almost. Except the kernel modules. For those:
> >
> >   apt install dahdi-source
> >   # also install module-assistant, if it wasn't installed already
> >   m-a a-i dahdi
> >   # Should also install linux-headers-`uname -r`, IIRC
> >
> > >
> > > 2. On my box, the following fails. What would you suggest ? Re-base
> > > everything on Jessie ?
> > > apt-get install linux-headers-`uname -r`
> >
> > That should not happen. What is the output of uname -r #?
> >
> 
> # uname -r
> 4.8.0-2-686-pae
> 
> # apt-get install linux-headers-`uname -r`
> ...
> E: Couldn't find any package by glob 'linux-headers-4.8.0-2-686-pae'
> 
> # apt-cache show linux-headers-4.8
> ...
> N: Couldn't find any package by glob 'linux-headers-4.8'
> ...
> 
> # apt-cache show linux-headers-4.9
> Package: linux-headers-4.9.0-2-686
> Source: linux
> ...
> 
> It looks like linux-headers-4.8 are currently missing in Stretch repo
> though currently installed kernel is 4.8.
> This issue seems quite independant from asterisk, anyway.

You probably started working on this box a while ago. Streetch's current
kernel is 4.9.0-2 (it changed shortly before the freeze). It is now
frozen and won't change (barring a really good reason).

> 
> 
> I started all over with a Jessie box.

I recommend to go back to Stretch and just upgrade the kernel. In other
words: keep the software up-to-date.

> Relating to [1], I could positively run:
> # m-a a-i dahdi
> ...
> 
> But # dahdi_genconf required a reboot to run OK.

Certainly not. See below.

> Though this worries me as I need to script the whole install process, I can
> leave it aside at the moment.
> 
> 
> 
> > >
> > > 3. How is dahdi started-stopped in Stretch ? (I can't find any
> > > /etc/init.d/dahdi file after apt-get install asterisk-dahdi).
> >
> > Started: should be automatically at boot.
> 
> 
> Shall I find an /etc/init.d/dahdi file or equivalent ?
> If positive which command produces this file ?
> I would expect dahdi-linux or dahdi packages to install these file.
> 
> 
> > Waht hardware device do you
> > have?
> >
> 
> # dahdi_hardware
> pci::04:05.0 wctdm24xxp+  d161:8007 HA8-

Traditionally dahdi has been shipped with a modprobe.d configuration
file to blacklist all of the PCI cards. This was because the order in
which they were loaded was not well-defined.

This is irrelevant on a system with a single device. And anyway,
irrelevant in a system configured (as is in the Debian packages) with
auto_assign_spans=0 . In such a system, devices register automatically,
but their spans are not assigned span and channel numbers unless they
are configured in /etc/dahdi/assigned-spans.conf .

So try:

  dahdi_span_assignment auto
  dahdi_genconf

Another reason that the init file was removed is because there is no
need to assign DAHDI spans before asterisk is started: if the channels
are configured with Asterisk, they will appear when assigned (using a
script in /usr/share/dahdi/span_config.d/).

-- 
   Tzafrir Cohen
icq#16849755  jabber:tzafrir.co...@xorcom.com
+972-50-7952406   mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com

-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] How to install and configure Dahdi from Debian Stretch repo ?

[Olivier]

2017-03-14 13:08 GMT+01:00 Tzafrir Cohen :

> On Tue, Mar 14, 2017 at 11:10:57AM +0100, Olivier wrote:
> > Hello,
> >
> > After all these years installing from source, I'm giving Dahdi package
> > installation a try on a recent Stretch box.
> >
> > Google over the web, I didn't find too many doc on this topic.
> >
> > 1. Is this one [1] up-to-date ?
>
> Not exactly.
>
> > Reading Stretch I would say a single asterisk-dahdi would be enough to
> > install asterisk dahdi and libpri.
>
> Almost. Except the kernel modules. For those:
>
>   apt install dahdi-source
>   # also install module-assistant, if it wasn't installed already
>   m-a a-i dahdi
>   # Should also install linux-headers-`uname -r`, IIRC
>
> >
> > 2. On my box, the following fails. What would you suggest ? Re-base
> > everything on Jessie ?
> > apt-get install linux-headers-`uname -r`
>
> That should not happen. What is the output of uname -r #?
>

# uname -r
4.8.0-2-686-pae

# apt-get install linux-headers-`uname -r`
...
E: Couldn't find any package by glob 'linux-headers-4.8.0-2-686-pae'

# apt-cache show linux-headers-4.8
...
N: Couldn't find any package by glob 'linux-headers-4.8'
...

# apt-cache show linux-headers-4.9
Package: linux-headers-4.9.0-2-686
Source: linux
...

It looks like linux-headers-4.8 are currently missing in Stretch repo
though currently installed kernel is 4.8.
This issue seems quite independant from asterisk, anyway.


I started all over with a Jessie box.
Relating to [1], I could positively run:
# m-a a-i dahdi
...

But # dahdi_genconf required a reboot to run OK.
Though this worries me as I need to script the whole install process, I can
leave it aside at the moment.



> >
> > 3. How is dahdi started-stopped in Stretch ? (I can't find any
> > /etc/init.d/dahdi file after apt-get install asterisk-dahdi).
>
> Started: should be automatically at boot.


Shall I find an /etc/init.d/dahdi file or equivalent ?
If positive which command produces this file ?
I would expect dahdi-linux or dahdi packages to install these file.


> Waht hardware device do you
> have?
>

# dahdi_hardware
pci::04:05.0 wctdm24xxp+  d161:8007 HA8-


>
> --
>Tzafrir Cohen
> icq#16849755  jabber:tzafrir.co...@xorcom.com
> +972-50-7952406   mailto:tzafrir.co...@xorcom.com
> http://www.xorcom.com
>
> --
> _
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Check out the new Asterisk community forum at: https://community.asterisk.
> org/
>
> New to Asterisk? Start here:
>   https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>http://lists.digium.com/mailman/listinfo/asterisk-users
>
-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] How to install and configure Dahdi from Debian Stretch repo ?

[Tzafrir Cohen]

On Tue, Mar 14, 2017 at 11:10:57AM +0100, Olivier wrote:
> Hello,
> 
> After all these years installing from source, I'm giving Dahdi package
> installation a try on a recent Stretch box.
> 
> Google over the web, I didn't find too many doc on this topic.
> 
> 1. Is this one [1] up-to-date ?

Not exactly.

> Reading Stretch I would say a single asterisk-dahdi would be enough to
> install asterisk dahdi and libpri.

Almost. Except the kernel modules. For those:

  apt install dahdi-source
  # also install module-assistant, if it wasn't installed already
  m-a a-i dahdi
  # Should also install linux-headers-`uname -r`, IIRC

> 
> 2. On my box, the following fails. What would you suggest ? Re-base
> everything on Jessie ?
> apt-get install linux-headers-`uname -r`

That should not happen. What is the output of uname -r #?

> 
> 3. How is dahdi started-stopped in Stretch ? (I can't find any
> /etc/init.d/dahdi file after apt-get install asterisk-dahdi).

Started: should be automatically at boot. Waht hardware device do you
have?

-- 
   Tzafrir Cohen
icq#16849755  jabber:tzafrir.co...@xorcom.com
+972-50-7952406   mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com

-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

[asterisk-users] How to install and configure Dahdi from Debian Stretch repo ?

[Olivier]

Hello,

After all these years installing from source, I'm giving Dahdi package
installation a try on a recent Stretch box.

Google over the web, I didn't find too many doc on this topic.

1. Is this one [1] up-to-date ?
Reading Stretch I would say a single asterisk-dahdi would be enough to
install asterisk dahdi and libpri.

2. On my box, the following fails. What would you suggest ? Re-base
everything on Jessie ?
apt-get install linux-headers-`uname -r`

3. How is dahdi started-stopped in Stretch ? (I can't find any
/etc/init.d/dahdi file after apt-get install asterisk-dahdi).


Best regards




[1]
http://paulswasteland.blogspot.fr/2013/10/quickly-install-asterisk-and-dahdi-on.html
-- 
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
  https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users