Re: [asterisk-users] Optus PRI via DSL
On 08/10/2006, at 9:34 PM, Paul Hales wrote: I have seen an Optus SHDSL box set up incorrectly before - and the tech re-visited and set it up correctly within hours of being informed. Same with my Optus SHDSL box: The first tech misconfigured, so I kept getting PRI restarts on my Sangoma card. They came back and reconfigured and now it works like a charm. cYa, Avi -- National Manager - Special Projects < Sydney / Melbourne / Canberra / Hobart / London /> 2/340 Gore StreetT: +61 (0) 3 9235 5400 Fitzroy, VIC F: +61 (0) 3 9235 5444 3065 W: http://www.squiz.net . > > Open Source - Own It - Squiz.net .. /> ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Optus PRI via DSL
I have seen an Optus SHDSL box set up incorrectly before - and the tech re-visited and set it up correctly within hours of being informed. PaulH On Fri, 2006-10-06 at 12:17 +1000, [EMAIL PROTECTED] wrote: > There was a bit of traffic on this list a while ago regarding OPTUS > multi line that comes in via a DSL box, and I am hoping some of those > people are still hanging around, and solved their problems. > > We apparently have a 14B channel service with optus. > > I have been trying to configure Asterisk, with a TE110p card with no > luck at this stage. > > I have consoled onto the DSL box and have found the following: > The box is an ADTRAN 408582526 SHDSL box > The operation mode is NTU G.703 Unframed (Indep. Clk) > > > Now when I plug in an Rj-45 from the DSL box to the TE110p I get > nothing, and so I have made an E1 crossover, and I now get a combination > of green lights. One on the back of the TE110p, and the G.703 light on > the DSL modem comes on. > > This would suggest to me that the physical link is working fine. > > The following comes up at boot: > TE110P: Setting up global serial parameters for E1 FALC V1.2 > TE110P: Successfully initialized serial bus for card > Found a Wildcard: Digium Wildcard TE110P T1/E1 > Registered tone zone 1 (Australia) > TE110P: Span configured for CCS/HDB3/CRC4 > > > my /etc/zaptel.conf is as follows: > span=1,1,0,ccs,hdb3,crc4 > bchan=1-14 > dchan=16 > unused=15,17-31 > > loadzone = au > defaultzone = au > > > When I try and dial our inbound number, I just get a busy signal. > > The fact that NTU G.703 is operating in Unframed mode on the DSL > looks to be the problem to me, however I am in over my head a little > with this stuff. > > Unfortunately I do not have the management password to login and change > the framing on the HDSL modem. > > Would I be correct to say if I use clear channel on the TE110p (ie not > use framing) it would work, and how do I set this on the card? > > Anyone have any ideas of where I should go from here? > > Thanks in advance > > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Optus PRI via DSL
There was a bit of traffic on this list a while ago regarding OPTUS multi line that comes in via a DSL box, and I am hoping some of those people are still hanging around, and solved their problems. We apparently have a 14B channel service with optus. I have been trying to configure Asterisk, with a TE110p card with no luck at this stage. I have consoled onto the DSL box and have found the following: The box is an ADTRAN 408582526 SHDSL box The operation mode is NTU G.703 Unframed (Indep. Clk) Now when I plug in an Rj-45 from the DSL box to the TE110p I get nothing, and so I have made an E1 crossover, and I now get a combination of green lights. One on the back of the TE110p, and the G.703 light on the DSL modem comes on. This would suggest to me that the physical link is working fine. The following comes up at boot: TE110P: Setting up global serial parameters for E1 FALC V1.2 TE110P: Successfully initialized serial bus for card Found a Wildcard: Digium Wildcard TE110P T1/E1 Registered tone zone 1 (Australia) TE110P: Span configured for CCS/HDB3/CRC4 my /etc/zaptel.conf is as follows: span=1,1,0,ccs,hdb3,crc4 bchan=1-14 dchan=16 unused=15,17-31 loadzone = au defaultzone = au When I try and dial our inbound number, I just get a busy signal. The fact that NTU G.703 is operating in Unframed mode on the DSL looks to be the problem to me, however I am in over my head a little with this stuff. Unfortunately I do not have the management password to login and change the framing on the HDSL modem. Would I be correct to say if I use clear channel on the TE110p (ie not use framing) it would work, and how do I set this on the card? Anyone have any ideas of where I should go from here? Thanks in advance ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Optus PRI via DSL
There was a bit of traffic on this list a while ago regarding OPTUS multi line that comes in via a DSL box, and I am hoping some of those people are still hanging around, and solved their problems. We apparently have a 14B channel service with optus. I have been trying to configure Asterisk, with a TE110p card with no luck at this stage. I have consoled onto the DSL box and have found the following: The box is an ADTRAN 408582526 SHDSL box The operation mode is NTU G.703 Unframed (Indep. Clk) Now when I plug in an Rj-45 from the DSL box to the TE110p I get nothing, and so I have made an E1 crossover, and I now get a combination of green lights. One on the back of the TE110p, and the G.703 light on the DSL modem comes on. This would suggest to me that the physical link is working fine. The following comes up at boot: TE110P: Setting up global serial parameters for E1 FALC V1.2 TE110P: Successfully initialized serial bus for card Found a Wildcard: Digium Wildcard TE110P T1/E1 Registered tone zone 1 (Australia) TE110P: Span configured for CCS/HDB3/CRC4 my /etc/zaptel.conf is as follows: span=1,1,0,ccs,hdb3,crc4 bchan=1-14 dchan=16 unused=15,17-31 loadzone = au defaultzone = au When I try and dial our inbound number, I just get a busy signal. The fact that NTU G.703 is operating in Unframed mode on the DSL looks to be the problem to me, however I am in over my head a little with this stuff. Unfortunately I do not have the management password to login and change the framing on the HDSL modem. Would I be correct to say if I use clear channel on the TE110p (ie not use framing) it would work, and how do I set this on the card? Anyone have any ideas of where I should go from here? Thanks in advance ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
