Re: [asterisk-users] Problem configuring TDM400
jonas kellens wrote: On Fri, 2009-07-03 at 11:58 +0100, Mike wrote: tempest:~# lspci 00:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface I don't think this is you TDM-card... This is mine : 04:05.0 Ethernet controller: Digium, Inc. TDM400P (rev 11) Subsystem: Digium, Inc. TDM400P Flags: bus master, medium devsel, latency 32, IRQ 90 I/O ports at d100 [size=256] Memory at ff74 (32-bit, non-prefetchable) [size=1K] Expansion ROM at 8000 [disabled] [size=128K] Capabilities: [c0] Power Management version 2 I don't think your XEN VM can see your TDM-card. You will need to ad a module to your XEN-kernel to be able to speak to your TDM pci-card. Don't know if this module exists... My TDM400P appears as his does: 00:14.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface -Dave ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Problem configuring TDM400
Mike wrote: Folks, I have a Xen Asterisk VM with a TDM400 card. When I try to run dahdi_cfg, I get: tempest:~# dahdi_cfg -vvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): Configuration == Channel map: Channel 01: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 01) Channel 03: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 04) 3 channels to configure. DAHDI_CHANCONFIG failed on channel 1: No such device or address (6) The card appears to be detected: tempest:~# lspci 00:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface I have the kernel modules loaded: tempest:~# lsmod Module Size Used by wctdm 35024 0 dahdi 185352 1 wctdm crc_ccitt 2848 1 dahdi autofs418500 0 ipv6 236612 10 ext3 106664 1 jbd43092 1 ext3 mbcache 8260 1 ext3 dm_mirror 16288 0 dm_log 9444 1 dm_mirror dm_snapshot15108 0 dm_mod 47304 3 dm_mirror,dm_log,dm_snapshot raid1 19200 0 md_mod 69180 1 raid1 thermal_sys11624 0 [ 1327.030178] dahdi: Telephony Interface Registered on major 196 [ 1327.030253] dahdi: Version: 2.2.0 I have Googled for this problem and found a lot of people reporting the issue but nobody really having much of an answer! I've seen the issue a few times. The strange thing is that I did have things working but then I rebotoed the box and it seems to have given up. I have a fairly straight forward DAHDI config file which has served me perfectly well in the past. tempest:~# cat /etc/dahdi/system.conf # Autogenerated by /usr/sbin/dahdi_genconf on Fri Jul 3 09:56:12 2009 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Global data loadzone= uk defaultzone = uk fxoks=1 fxsks=3,4 I have tried only bringing up certain channels but that still fails. Does anyone have any idea what could be wrong? Mike. Did do all the device files show up in /dev/dahdi/ ? You should have something close to this: r...@jaguar:~# ls -l /dev/dahdi/ total 0 crw-rw 1 asterisk asterisk 196, 1 2009-07-05 09:32 1 crw-rw 1 asterisk asterisk 196, 2 2009-07-05 09:32 2 crw-rw 1 asterisk asterisk 196, 3 2009-07-05 09:32 3 crw-rw 1 asterisk asterisk 196, 4 2009-07-05 09:32 4 crw-rw 1 asterisk asterisk 196, 254 2009-07-05 09:32 channel crw-rw 1 asterisk asterisk 196, 0 2009-07-05 09:32 ctl crw-rw 1 asterisk asterisk 196, 255 2009-07-05 09:32 pseudo crw-rw 1 asterisk asterisk 196, 253 2009-07-05 09:32 timer -Dave ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Problem configuring TDM400
Folks, I have a Xen Asterisk VM with a TDM400 card. When I try to run dahdi_cfg, I get: tempest:~# dahdi_cfg -vvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): Configuration == Channel map: Channel 01: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 01) Channel 03: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 04) 3 channels to configure. DAHDI_CHANCONFIG failed on channel 1: No such device or address (6) The card appears to be detected: tempest:~# lspci 00:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface I have the kernel modules loaded: tempest:~# lsmod Module Size Used by wctdm 35024 0 dahdi 185352 1 wctdm crc_ccitt 2848 1 dahdi autofs418500 0 ipv6 236612 10 ext3 106664 1 jbd43092 1 ext3 mbcache 8260 1 ext3 dm_mirror 16288 0 dm_log 9444 1 dm_mirror dm_snapshot15108 0 dm_mod 47304 3 dm_mirror,dm_log,dm_snapshot raid1 19200 0 md_mod 69180 1 raid1 thermal_sys11624 0 [ 1327.030178] dahdi: Telephony Interface Registered on major 196 [ 1327.030253] dahdi: Version: 2.2.0 I have Googled for this problem and found a lot of people reporting the issue but nobody really having much of an answer! I've seen the issue a few times. The strange thing is that I did have things working but then I rebotoed the box and it seems to have given up. I have a fairly straight forward DAHDI config file which has served me perfectly well in the past. tempest:~# cat /etc/dahdi/system.conf # Autogenerated by /usr/sbin/dahdi_genconf on Fri Jul 3 09:56:12 2009 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Global data loadzone= uk defaultzone = uk fxoks=1 fxsks=3,4 I have tried only bringing up certain channels but that still fails. Does anyone have any idea what could be wrong? Mike. signature.asc Description: Digital signature ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Problem configuring TDM400
On Fri, 2009-07-03 at 11:58 +0100, Mike wrote: tempest:~# lspci 00:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface I don't think this is you TDM-card... This is mine : 04:05.0 Ethernet controller: Digium, Inc. TDM400P (rev 11) Subsystem: Digium, Inc. TDM400P Flags: bus master, medium devsel, latency 32, IRQ 90 I/O ports at d100 [size=256] Memory at ff74 (32-bit, non-prefetchable) [size=1K] Expansion ROM at 8000 [disabled] [size=128K] Capabilities: [c0] Power Management version 2 I don't think your XEN VM can see your TDM-card. You will need to ad a module to your XEN-kernel to be able to speak to your TDM pci-card. Don't know if this module exists... Jonas. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users