Re: [asterisk-users] Snom 360 lights not working on subscription / fail to extend xx to xx error
Dear guys, many people have been using Snom with Subscription/notify lights I tried almost every tip in the google. But there's one thing related to the snom phones and asterisk I didn't see in any forum The Asterisk console show very often a message like: fail to extend from xx to xxx This message appears ver often and when snom phones do reboot or subscribe or while it receives notify messages. Any idea? BTW. in Snom's sip trace content length is 0 in every NOTIFY message received by phone and there's no XML thanks and regards, Carlos On Oct 23, 2007, at 8:55 PM, Craig Guy wrote: > The Linksys SPA962 with SPA932 sidecar support both speed dial and > BLF. > IMHO very good for the money and very easy to provision once you > get a hold > of the proper provisioning guide. These things are designed for mass > deployment and remote provisioning. As other people have noted, > you need to > provision via http rather than tftp for best effect. I also have two > provisioning files, a shared settings file with the bulk of the > config and > then a per handset file based on the mac address containing the > account and > any special customisations. The only bad bit is that a resync usually > causes a reboot of the handset which interrupts the connection of > anything > attached to the PC port of the phone. > > Craig > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Omar > A. Sabek > Sent: Tuesday, 23 October 2007 1:08 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Snom 360 lights not working on > subscription > > Hey Mike, > > We started deploying exclusively Polycom and Linksys. The Polycom's > support presence, they call it 'Buddy List'. I am not sure about the > Linksys phones, I don't think they do although I did see support for > SLA (Shared Line Appearance). > > Omar > > On 10/23/07, Michael J. Liberatore > <[EMAIL PROTECTED]> > wrote: >> I also have problems with these phones. I have deployed many of them >> and have had nothing but problems. Omar, what phones did you >> switch to? >> I needed some of the features of the snom phones, like the multiple >> buttons with prescence lights. >> >> Mike >> >> >> >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of Omar A. >> Sabek >> Sent: Monday, October 22, 2007 9:27 PM >> To: Asterisk Users Mailing List - Non-Commercial Discussion >> Subject: Re: [asterisk-users] Snom 360 lights not working on >> subscription >> >> I used to deploy these phones, it was these types of issues that >> forced >> me to drop it. It took way too long to troubleshoot the problems and >> there was a general lack of documentation. This was 2 years ago, >> things >> might have changed. If I remember correctly, it was this issue you >> are >> having that was the final straw. >> >> Good luck, >> >> Omar >> >> On 10/22/07, Carlos Maimone <[EMAIL PROTECTED]> wrote: >>> Dear friends, >>> >>> I am working around with a Snom 360 and Asterisk 1.4 + FreePBX >>> >>> In order to get subscriptions working and the Snom 360 lights turns >>> on, I have set everything just like all the pages in the net >>> explain. >>> >>> So, I get subsciption working. I can list subscription on the >>> asterisk >> >>> and if I use the SIP trace function built in at the SNOM nad see >>> NOTIFY messages and 200 OK responses. But I realized that content >>> length = 0 in all messsages and there isn't any XML content in those >>> Notify headers.. >>> >>> >>> any idea of what's going on? >>> >>> IN SNOM 360 I am currently using firmware 6.5.12 >>> >>> I am pretty sick dealing with this issue. >>> >>> >>> thanks and regards, >>> >>> >>> Charlie >>> >>> ___ >>> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>>http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> >> ___ >> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options
Re: [asterisk-users] Snom 360 lights not working on subscription
The Linksys SPA962 with SPA932 sidecar support both speed dial and BLF. IMHO very good for the money and very easy to provision once you get a hold of the proper provisioning guide. These things are designed for mass deployment and remote provisioning. As other people have noted, you need to provision via http rather than tftp for best effect. I also have two provisioning files, a shared settings file with the bulk of the config and then a per handset file based on the mac address containing the account and any special customisations. The only bad bit is that a resync usually causes a reboot of the handset which interrupts the connection of anything attached to the PC port of the phone. Craig -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Omar A. Sabek Sent: Tuesday, 23 October 2007 1:08 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Snom 360 lights not working on subscription Hey Mike, We started deploying exclusively Polycom and Linksys. The Polycom's support presence, they call it 'Buddy List'. I am not sure about the Linksys phones, I don't think they do although I did see support for SLA (Shared Line Appearance). Omar On 10/23/07, Michael J. Liberatore <[EMAIL PROTECTED]> wrote: > I also have problems with these phones. I have deployed many of them > and have had nothing but problems. Omar, what phones did you switch to? > I needed some of the features of the snom phones, like the multiple > buttons with prescence lights. > > Mike > > > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Omar A. > Sabek > Sent: Monday, October 22, 2007 9:27 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Snom 360 lights not working on > subscription > > I used to deploy these phones, it was these types of issues that forced > me to drop it. It took way too long to troubleshoot the problems and > there was a general lack of documentation. This was 2 years ago, things > might have changed. If I remember correctly, it was this issue you are > having that was the final straw. > > Good luck, > > Omar > > On 10/22/07, Carlos Maimone <[EMAIL PROTECTED]> wrote: > > Dear friends, > > > > I am working around with a Snom 360 and Asterisk 1.4 + FreePBX > > > > In order to get subscriptions working and the Snom 360 lights turns > > on, I have set everything just like all the pages in the net explain. > > > > So, I get subsciption working. I can list subscription on the asterisk > > > and if I use the SIP trace function built in at the SNOM nad see > > NOTIFY messages and 200 OK responses. But I realized that content > > length = 0 in all messsages and there isn't any XML content in those > > Notify headers.. > > > > > > any idea of what's going on? > > > > IN SNOM 360 I am currently using firmware 6.5.12 > > > > I am pretty sick dealing with this issue. > > > > > > thanks and regards, > > > > > > Charlie > > > > ___ > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > >http://lists.digium.com/mailman/listinfo/asterisk-users > > > > ___ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > > > This E-mail, including any attachments, may be intended solely for > the personal and confidential use of the sender and recipient(s) named > above. This message may include advisory, consultative and/or > deliberative material and, as such, would be privileged and confidential > and not a public document. Pursuant to 42 CFR, any information in this > e-mail identifying a former, present, or potential client of Straight & Narrow is confidential. If you have received this e-mail in error, you must not review, transmit, convert to hard copy, copy, use or disseminate this e-mail or any attachments to it and you must delete this message. You are requested to notify the sender by return e-mail. > > > ___ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ --Bandwidth and Colo
Re: [asterisk-users] Snom 360 lights not working on subscription
>> In order to get subscriptions working and the Snom 360 lights turns >> on, I have set everything just like all the pages in the net explain. >> >> So, I get subsciption working. I can list subscription on the >> asterisk and if I use the SIP trace function built in at the SNOM nad >> see NOTIFY messages and 200 OK responses. But I realized that content >> length = 0 in all messsages and there isn't any XML content in those >> Notify headers.. > What we found is that even if you get the lights working, they go off > after a few days. The BLF lights on the Snom 360s work for me (Asterisk 1.4, Snom 6.5.12 firmware), but I reboot them nightly. I have noticed that the Snom BLFs can stop working if the network is busy for a long period of time (i.e., longer than the re-registration period), like during system-wide backups and yum-upgrades. To avoid this problem, I have a cron job reboot the Snoms nightly after scheduled backups/upgrades. I'm not sure if this is a network congestion issue or a server CPU overload issue, or something else. Anyway, this arrangement does seem to be pretty reliable. To reboot a Snom: http://www.voip-info.org/wiki/view/Asterisk+phone+snom#RebootingaSNOM360320. Hope this helps. - Mike ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Snom 360 lights not working on subscription
Hey Mike, We started deploying exclusively Polycom and Linksys. The Polycom's support presence, they call it 'Buddy List'. I am not sure about the Linksys phones, I don't think they do although I did see support for SLA (Shared Line Appearance). Omar On 10/23/07, Michael J. Liberatore <[EMAIL PROTECTED]> wrote: > I also have problems with these phones. I have deployed many of them > and have had nothing but problems. Omar, what phones did you switch to? > I needed some of the features of the snom phones, like the multiple > buttons with prescence lights. > > Mike > > > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Omar A. > Sabek > Sent: Monday, October 22, 2007 9:27 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Snom 360 lights not working on > subscription > > I used to deploy these phones, it was these types of issues that forced > me to drop it. It took way too long to troubleshoot the problems and > there was a general lack of documentation. This was 2 years ago, things > might have changed. If I remember correctly, it was this issue you are > having that was the final straw. > > Good luck, > > Omar > > On 10/22/07, Carlos Maimone <[EMAIL PROTECTED]> wrote: > > Dear friends, > > > > I am working around with a Snom 360 and Asterisk 1.4 + FreePBX > > > > In order to get subscriptions working and the Snom 360 lights turns > > on, I have set everything just like all the pages in the net explain. > > > > So, I get subsciption working. I can list subscription on the asterisk > > > and if I use the SIP trace function built in at the SNOM nad see > > NOTIFY messages and 200 OK responses. But I realized that content > > length = 0 in all messsages and there isn't any XML content in those > > Notify headers.. > > > > > > any idea of what's going on? > > > > IN SNOM 360 I am currently using firmware 6.5.12 > > > > I am pretty sick dealing with this issue. > > > > > > thanks and regards, > > > > > > Charlie > > > > ___ > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > >http://lists.digium.com/mailman/listinfo/asterisk-users > > > > ___ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > > > This E-mail, including any attachments, may be intended solely for > the personal and confidential use of the sender and recipient(s) named > above. This message may include advisory, consultative and/or > deliberative material and, as such, would be privileged and confidential > and not a public document. Pursuant to 42 CFR, any information in this > e-mail identifying a former, present, or potential client of Straight & > Narrow is confidential. If you have received this e-mail in error, you must > not review, transmit, convert to hard copy, copy, use or disseminate this > e-mail or any attachments to it and you must delete this message. You are > requested to notify the sender by return e-mail. > > > ___ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Snom 360 lights not working on subscription
I also have problems with these phones. I have deployed many of them and have had nothing but problems. Omar, what phones did you switch to? I needed some of the features of the snom phones, like the multiple buttons with prescence lights. Mike -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Omar A. Sabek Sent: Monday, October 22, 2007 9:27 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Snom 360 lights not working on subscription I used to deploy these phones, it was these types of issues that forced me to drop it. It took way too long to troubleshoot the problems and there was a general lack of documentation. This was 2 years ago, things might have changed. If I remember correctly, it was this issue you are having that was the final straw. Good luck, Omar On 10/22/07, Carlos Maimone <[EMAIL PROTECTED]> wrote: > Dear friends, > > I am working around with a Snom 360 and Asterisk 1.4 + FreePBX > > In order to get subscriptions working and the Snom 360 lights turns > on, I have set everything just like all the pages in the net explain. > > So, I get subsciption working. I can list subscription on the asterisk > and if I use the SIP trace function built in at the SNOM nad see > NOTIFY messages and 200 OK responses. But I realized that content > length = 0 in all messsages and there isn't any XML content in those > Notify headers.. > > > any idea of what's going on? > > IN SNOM 360 I am currently using firmware 6.5.12 > > I am pretty sick dealing with this issue. > > > thanks and regards, > > > Charlie > > ___ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users This E-mail, including any attachments, may be intended solely for the personal and confidential use of the sender and recipient(s) named above. This message may include advisory, consultative and/or deliberative material and, as such, would be privileged and confidential and not a public document. Pursuant to 42 CFR, any information in this e-mail identifying a former, present, or potential client of Straight & Narrow is confidential. If you have received this e-mail in error, you must not review, transmit, convert to hard copy, copy, use or disseminate this e-mail or any attachments to it and you must delete this message. You are requested to notify the sender by return e-mail. ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Snom 360 lights not working on subscription
I used to deploy these phones, it was these types of issues that forced me to drop it. It took way too long to troubleshoot the problems and there was a general lack of documentation. This was 2 years ago, things might have changed. If I remember correctly, it was this issue you are having that was the final straw. Good luck, Omar On 10/22/07, Carlos Maimone <[EMAIL PROTECTED]> wrote: > Dear friends, > > I am working around with a Snom 360 and Asterisk 1.4 + FreePBX > > In order to get subscriptions working and the Snom 360 lights turns > on, I have set everything just like all the pages in the net explain. > > So, I get subsciption working. I can list subscription on the > asterisk and if I use the SIP trace function built in at the SNOM nad > see NOTIFY messages and 200 OK responses. But I realized that content > length = 0 in all messsages and there isn't any XML content in those > Notify headers.. > > > any idea of what's going on? > > IN SNOM 360 I am currently using firmware 6.5.12 > > I am pretty sick dealing with this issue. > > > thanks and regards, > > > Charlie > > ___ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Snom 360 lights not working on subscription
What we found is that even if you get the lights working, they go off after a few days. Paul Hales AsteriskIT On Mon, 2007-10-22 at 09:49 -0300, Carlos Maimone wrote: > Dear friends, > > I am working around with a Snom 360 and Asterisk 1.4 + FreePBX > > In order to get subscriptions working and the Snom 360 lights turns > on, I have set everything just like all the pages in the net explain. > > So, I get subsciption working. I can list subscription on the > asterisk and if I use the SIP trace function built in at the SNOM nad > see NOTIFY messages and 200 OK responses. But I realized that content > length = 0 in all messsages and there isn't any XML content in those > Notify headers.. > > > any idea of what's going on? > > IN SNOM 360 I am currently using firmware 6.5.12 > > I am pretty sick dealing with this issue. > > > thanks and regards, > > > Charlie > > ___ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Snom 360 lights not working on subscription
Dear friends, I am working around with a Snom 360 and Asterisk 1.4 + FreePBX In order to get subscriptions working and the Snom 360 lights turns on, I have set everything just like all the pages in the net explain. So, I get subsciption working. I can list subscription on the asterisk and if I use the SIP trace function built in at the SNOM nad see NOTIFY messages and 200 OK responses. But I realized that content length = 0 in all messsages and there isn't any XML content in those Notify headers.. any idea of what's going on? IN SNOM 360 I am currently using firmware 6.5.12 I am pretty sick dealing with this issue. thanks and regards, Charlie ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
