Re: [asterisk-users] ZAP device reference in Zaptel 1.4 - SIMILAR
I used the packages that were mentioned and have a link on the main website and www.asterisk.org/download I thought these were ok for production/use... I just compiled 1.4.1 (./configure and make, no make install) and copied the chan_zap.so module into /usr/lib/asterisk/modules, restarted asterisk (the 'old' 1.4.2) and it seems to work now. zap show channels gives me one channel, and that's correct, and when dialing in, the cli gives me status on the channel and the incoming calls... I just wanted to let you guys know how I resolved it (for now), and see if anyone knows when they are/were going to fix this issue? (1.4.3 or 1.4.2.x??) Thanks for the help!! Bram On Wed, Apr 04, 2007 at 11:51:21PM +0200, bram kortleven wrote: Well, I'm experiencing a similar problem with my setup... debian etch, asterisk 1.4.2, zaptel 1.4.1, ... I cannot find the chan_zap.so module file anywhere, tried recompiling with zaptel 1.4.0... no change... I tried 'make menuselect', and going to the channels-part, chan_zap is marked XXX - dependencies missing: and this is the message for it, as an explanation. Zapata Telephony Depends on: zaptel_vldtmf(E), zaptel(E), tonezone(E) Can use: pri Anyone any idea how to resolve Do you use the packages from Experimental? If so: indeed some of them were lacking chan_zap.so . Hwever that shoul have been fixed on the latest version (through a build-dependency on zaptel = 1.4.1 ) -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir -- ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAP device reference in Zaptel 1.4
On Wed, Apr 04, 2007 at 02:55:02PM +1000, Devraj Mukherjee wrote: Also I can cat /dev/zap/3 and /dev/zap/4 and they respond to the various changes in signals You're looking at the kernel level . Maybe it's fine there, but asterisk does not know about it. What is the output of: zap show channels What is the contents of /etc/asterisk/zapata.conf ? -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAP device reference in Zaptel 1.4
monk*CLI zap show channels No such command 'zap show' (type 'help' for help) Does that mean I dont have ZAP support in Asterisk? On 4/4/07, Tzafrir Cohen [EMAIL PROTECTED] wrote: On Wed, Apr 04, 2007 at 02:55:02PM +1000, Devraj Mukherjee wrote: Also I can cat /dev/zap/3 and /dev/zap/4 and they respond to the various changes in signals You're looking at the kernel level . Maybe it's fine there, but asterisk does not know about it. What is the output of: zap show channels What is the contents of /etc/asterisk/zapata.conf ? -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- I never look back darling, it distracts from the now, Edna Mode (The Incredibles) ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAP device reference in Zaptel 1.4
Hi On Wed, Apr 04, 2007 at 04:59:41PM +1000, Devraj Mukherjee wrote: monk*CLI zap show channels No such command 'zap show' (type 'help' for help) Does that mean I dont have ZAP support in Asterisk? Maybe. ls -l /usr/lib/asterisk/modules/chan_zap.so I also repeat my second question: What is the contents of /etc/asterisk/zapata.conf ? -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAP device reference in Zaptel 1.4
No I don't. So that will be my problem. Thanks. On 4/4/07, Tzafrir Cohen [EMAIL PROTECTED] wrote: Hi On Wed, Apr 04, 2007 at 04:59:41PM +1000, Devraj Mukherjee wrote: monk*CLI zap show channels No such command 'zap show' (type 'help' for help) Does that mean I dont have ZAP support in Asterisk? Maybe. ls -l /usr/lib/asterisk/modules/chan_zap.so I also repeat my second question: What is the contents of /etc/asterisk/zapata.conf ? -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- I never look back darling, it distracts from the now, Edna Mode (The Incredibles) ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAP device reference in Zaptel 1.4
On Wed, Apr 04, 2007 at 10:11:01AM +0300, Tzafrir Cohen wrote: Hi On Wed, Apr 04, 2007 at 04:59:41PM +1000, Devraj Mukherjee wrote: monk*CLI zap show channels No such command 'zap show' (type 'help' for help) Does that mean I dont have ZAP support in Asterisk? Maybe. ls -l /usr/lib/asterisk/modules/chan_zap.so I also repeat my second question: What is the contents of /etc/asterisk/zapata.conf ? Follow-up: The issue seems to be an issue with the atrpms package: http://bugzilla.atrpms.net/show_bug.cgi?id=1165 Asterisk 1.4.2 is missing chan_zap.so -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAP device reference in Zaptel 1.4 - SIMILAR
Well, I'm experiencing a similar problem with my setup... debian etch, asterisk 1.4.2, zaptel 1.4.1, ... I cannot find the chan_zap.so module file anywhere, tried recompiling with zaptel 1.4.0... no change... I tried 'make menuselect', and going to the channels-part, chan_zap is marked XXX - dependencies missing: and this is the message for it, as an explanation. Zapata Telephony Depends on: zaptel_vldtmf(E), zaptel(E), tonezone(E) Can use: pri Anyone any idea how to resolve this?? Thanks On Wed, Apr 04, 2007 at 10:11:01AM +0300, Tzafrir Cohen wrote: Hi On Wed, Apr 04, 2007 at 04:59:41PM +1000, Devraj Mukherjee wrote: monk*CLI zap show channels No such command 'zap show' (type 'help' for help) Does that mean I dont have ZAP support in Asterisk? Maybe. ls -l /usr/lib/asterisk/modules/chan_zap.so I also repeat my second question: What is the contents of /etc/asterisk/zapata.conf ? Follow-up: The issue seems to be an issue with the atrpms package: http://bugzilla.atrpms.net/show_bug.cgi?id=1165 Asterisk 1.4.2 is missing chan_zap.so ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] ZAP device reference in Zaptel 1.4 - SIMILAR
After recompiling zaptel, did you recompile Asterisk? From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of bram kortleven Sent: Wednesday, April 04, 2007 14:51 To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] ZAP device reference in Zaptel 1.4 - SIMILAR Well, I'm experiencing a similar problem with my setup... debian etch, asterisk 1.4.2, zaptel 1.4.1, ... I cannot find the chan_zap.so module file anywhere, tried recompiling with zaptel 1.4.0... no change... I tried 'make menuselect', and going to the channels-part, chan_zap is marked XXX - dependencies missing: and this is the message for it, as an explanation. Zapata Telephony Depends on: zaptel_vldtmf(E), zaptel(E), tonezone(E) Can use: pri Anyone any idea how to resolve this?? Thanks On Wed, Apr 04, 2007 at 10:11:01AM +0300, Tzafrir Cohen wrote: Hi On Wed, Apr 04, 2007 at 04:59:41PM +1000, Devraj Mukherjee wrote: monk*CLI zap show channels No such command 'zap show' (type 'help' for help) Does that mean I dont have ZAP support in Asterisk? Maybe. ls -l /usr/lib/asterisk/modules/chan_zap.so I also repeat my second question: What is the contents of /etc/asterisk/zapata.conf ? Follow-up: The issue seems to be an issue with the atrpms package: http://bugzilla.atrpms.net/show_bug.cgi?id=1165 Asterisk 1.4.2 is missing chan_zap.so ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAP device reference in Zaptel 1.4 - SIMILAR
On Wed, Apr 04, 2007 at 11:51:21PM +0200, bram kortleven wrote: Well, I'm experiencing a similar problem with my setup... debian etch, asterisk 1.4.2, zaptel 1.4.1, ... I cannot find the chan_zap.so module file anywhere, tried recompiling with zaptel 1.4.0... no change... I tried 'make menuselect', and going to the channels-part, chan_zap is marked XXX - dependencies missing: and this is the message for it, as an explanation. Zapata Telephony Depends on: zaptel_vldtmf(E), zaptel(E), tonezone(E) Can use: pri Anyone any idea how to resolve Do you use the packages from Experimental? If so: indeed some of them were lacking chan_zap.so . Hwever that shoul have been fixed on the latest version (through a build-dependency on zaptel = 1.4.1 ) -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: RE: [asterisk-users] ZAP device reference in Zaptel 1.4 - SIMILAR
Yes I did, I even started all over again using the original source tar.gz packages... The menuselect thing bothers me the most... something is wrong or at least, missing. When compiling, I see all chan_... things passing, but no chan_zap... Hate it ... Thanks for the help - Original Message: After recompiling zaptel, did you recompile Asterisk? From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of bram kortleven Sent: Wednesday, April 04, 2007 14:51 To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] ZAP device reference in Zaptel 1.4 - SIMILAR Well, I'm experiencing a similar problem with my setup... debian etch, asterisk 1.4.2, zaptel 1.4.1, ... I cannot find the chan_zap.so module file anywhere, tried recompiling with zaptel 1.4.0... no change... I tried 'make menuselect', and going to the channels-part, chan_zap is marked XXX - dependencies missing: and this is the message for it, as an explanation. Zapata Telephony Depends on: zaptel_vldtmf(E), zaptel(E), tonezone(E) Can use: pri Anyone any idea how to resolve this?? Thanks On Wed, Apr 04, 2007 at 10:11:01AM +0300, Tzafrir Cohen wrote: Hi On Wed, Apr 04, 2007 at 04:59:41PM +1000, Devraj Mukherjee wrote: monk*CLI zap show channels No such command 'zap show' (type 'help' for help) Does that mean I dont have ZAP support in Asterisk? Maybe. ls -l /usr/lib/asterisk/modules/chan_zap.so I also repeat my second question: What is the contents of /etc/asterisk/zapata.conf ? Follow-up: The issue seems to be an issue with the atrpms package: http://bugzilla.atrpms.net/show_bug.cgi?id=1165 Asterisk 1.4.2 is missing chan_zap.so -- next part -- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070404/de4d4c46/attachment-0001.htm -- ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] ZAP device reference in Zaptel 1.4
Hi Everyone, I am using Zaptel and Asterisk 1.4 and have a Digium card with two FXS modules. The card works and ztcfg reports that it finds the two modules. Howevery when I try and place a call through the gateway I get the following error message. I have tried to refer to the ZAP device as ZAP/g2 etc Any suggestions? Anything that's different about Zaptel 1.4? -- Executing [EMAIL PROTECTED]:1] SetCDRUserField(SIP/103-b7802230, Telstra) in new stack -- Executing [EMAIL PROTECTED]:2] Dial(SIP/103-b7802230, ZAP/4/69223139) in new stack [Apr 4 10:47:43] WARNING[5659]: channel.c:3024 ast_request: No channel type registered for 'ZAP' [Apr 4 10:47:43] WARNING[5659]: app_dial.c:1090 dial_exec_full: Unable to create channel of type 'ZAP' (cause 66 - Channel not implemented) == Everyone is busy/congested at this time (1:0/0/1) == Auto fallthrough, channel 'SIP/103-b7802230' status is 'CHANUNAVAIL' Zaptel Version: 1.4.1 Echo Canceller: MG2 Configuration == Channel map: Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 2 channels configured. -- I never look back darling, it distracts from the now, Edna Mode (The Incredibles) ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAP device reference in Zaptel 1.4
Devraj Mukherjee wrote: Hi Everyone, I am using Zaptel and Asterisk 1.4 and have a Digium card with two FXS modules. The card works and ztcfg reports that it finds the two modules. Howevery when I try and place a call through the gateway I get the following error message. I have tried to refer to the ZAP device as ZAP/g2 etc Any suggestions? Anything that's different about Zaptel 1.4? -- Executing [EMAIL PROTECTED]:1] SetCDRUserField(SIP/103-b7802230, Telstra) in new stack -- Executing [EMAIL PROTECTED]:2] Dial(SIP/103-b7802230, ZAP/4/69223139) in new stack [Apr 4 10:47:43] WARNING[5659]: channel.c:3024 ast_request: No channel type registered for 'ZAP' [Apr 4 10:47:43] WARNING[5659]: app_dial.c:1090 dial_exec_full: Unable to create channel of type 'ZAP' (cause 66 - Channel not implemented) You need to reinstall Asterisk. You installed Asterisk before installing Zaptel so Asterisk did not build anything that requires Zaptel. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAP device reference in Zaptel 1.4
Hi Eric, Thanks for your suggestion I just reinstalled Asterisk, it still doesn't seem to know anything about Zaptel. I am using CentOS and installed Asterisk using yum from ATrpms. Anything else I can try? On 4/4/07, Eric ManxPower Wieling [EMAIL PROTECTED] wrote: Devraj Mukherjee wrote: Hi Everyone, I am using Zaptel and Asterisk 1.4 and have a Digium card with two FXS modules. The card works and ztcfg reports that it finds the two modules. Howevery when I try and place a call through the gateway I get the following error message. I have tried to refer to the ZAP device as ZAP/g2 etc Any suggestions? Anything that's different about Zaptel 1.4? -- Executing [EMAIL PROTECTED]:1] SetCDRUserField(SIP/103-b7802230, Telstra) in new stack -- Executing [EMAIL PROTECTED]:2] Dial(SIP/103-b7802230, ZAP/4/69223139) in new stack [Apr 4 10:47:43] WARNING[5659]: channel.c:3024 ast_request: No channel type registered for 'ZAP' [Apr 4 10:47:43] WARNING[5659]: app_dial.c:1090 dial_exec_full: Unable to create channel of type 'ZAP' (cause 66 - Channel not implemented) You need to reinstall Asterisk. You installed Asterisk before installing Zaptel so Asterisk did not build anything that requires Zaptel. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- I never look back darling, it distracts from the now, Edna Mode (The Incredibles) ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAP device reference in Zaptel 1.4
From: Devraj Mukherjee [EMAIL PROTECTED] Date: Wed, 4 Apr 2007 11:46:11 +1000 Hi Eric, Thanks for your suggestion I just reinstalled Asterisk, it still doesn't seem to know anything about Zaptel. I am using CentOS and installed Asterisk using yum from ATrpms. Anything else I can try? Try lsmod to confirm that zaptel is indeed installed. I'm not familiar with CentOS or yum, but I assume you installed a binary package, so chan_zap.so is probably included. Hope this helps. Yuan Liu On 4/4/07, Eric ManxPower Wieling [EMAIL PROTECTED] wrote: Devraj Mukherjee wrote: Hi Everyone, I am using Zaptel and Asterisk 1.4 and have a Digium card with two FXS modules. The card works and ztcfg reports that it finds the two modules. Howevery when I try and place a call through the gateway I get the following error message. I have tried to refer to the ZAP device as ZAP/g2 etc Any suggestions? Anything that's different about Zaptel 1.4? -- Executing [EMAIL PROTECTED]:1] SetCDRUserField(SIP/103-b7802230, Telstra) in new stack -- Executing [EMAIL PROTECTED]:2] Dial(SIP/103-b7802230, ZAP/4/69223139) in new stack [Apr 4 10:47:43] WARNING[5659]: channel.c:3024 ast_request: No channel type registered for 'ZAP' [Apr 4 10:47:43] WARNING[5659]: app_dial.c:1090 dial_exec_full: Unable to create channel of type 'ZAP' (cause 66 - Channel not implemented) You need to reinstall Asterisk. You installed Asterisk before installing Zaptel so Asterisk did not build anything that requires Zaptel. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAP device reference in Zaptel 1.4
Hi Yuan, zaptel is in fact loaded. Wonder what's going wrong? [EMAIL PROTECTED] ~]# lsmod Module Size Used by wcusb 18976 0 wctdm 34752 0 wcfxo 13472 0 wctdm24xxp 69696 0 wcte11xp 24608 0 wct1xxp15904 0 wct4xxp 229312 0 tor2 89760 0 zaptel184100 10 wcusb,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wct4xxp,tor2 parport_pc 28033 0 lp 15661 0 parport38025 2 parport_pc,lp autofs423109 0 sunrpc144037 1 md5 8129 1 ipv6 242657 28 crc_ccitt 6209 1 zaptel dm_mirror 31901 0 dm_mod 60741 1 dm_mirror button 10705 0 battery12997 0 ac 8901 0 joydev 14337 0 uhci_hcd 32857 0 ehci_hcd 32325 0 tg3 101189 0 e1000 109369 0 floppy 58193 0 ext3 119113 2 jbd59609 1 ext3 raid1 19649 3 ata_piix 15557 6 libata 67613 1 ata_piix sd_mod 20545 8 scsi_mod 117709 2 libata,sd_mod On 4/4/07, Yuan LIU [EMAIL PROTECTED] wrote: From: Devraj Mukherjee [EMAIL PROTECTED] Date: Wed, 4 Apr 2007 11:46:11 +1000 Hi Eric, Thanks for your suggestion I just reinstalled Asterisk, it still doesn't seem to know anything about Zaptel. I am using CentOS and installed Asterisk using yum from ATrpms. Anything else I can try? Try lsmod to confirm that zaptel is indeed installed. I'm not familiar with CentOS or yum, but I assume you installed a binary package, so chan_zap.so is probably included. Hope this helps. Yuan Liu On 4/4/07, Eric ManxPower Wieling [EMAIL PROTECTED] wrote: Devraj Mukherjee wrote: Hi Everyone, I am using Zaptel and Asterisk 1.4 and have a Digium card with two FXS modules. The card works and ztcfg reports that it finds the two modules. Howevery when I try and place a call through the gateway I get the following error message. I have tried to refer to the ZAP device as ZAP/g2 etc Any suggestions? Anything that's different about Zaptel 1.4? -- Executing [EMAIL PROTECTED]:1] SetCDRUserField(SIP/103-b7802230, Telstra) in new stack -- Executing [EMAIL PROTECTED]:2] Dial(SIP/103-b7802230, ZAP/4/69223139) in new stack [Apr 4 10:47:43] WARNING[5659]: channel.c:3024 ast_request: No channel type registered for 'ZAP' [Apr 4 10:47:43] WARNING[5659]: app_dial.c:1090 dial_exec_full: Unable to create channel of type 'ZAP' (cause 66 - Channel not implemented) You need to reinstall Asterisk. You installed Asterisk before installing Zaptel so Asterisk did not build anything that requires Zaptel. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- I never look back darling, it distracts from the now, Edna Mode (The Incredibles) ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ZAP device reference in Zaptel 1.4
Also I can cat /dev/zap/3 and /dev/zap/4 and they respond to the various changes in signals On 4/4/07, Devraj Mukherjee [EMAIL PROTECTED] wrote: Hi Yuan, zaptel is in fact loaded. Wonder what's going wrong? [EMAIL PROTECTED] ~]# lsmod Module Size Used by wcusb 18976 0 wctdm 34752 0 wcfxo 13472 0 wctdm24xxp 69696 0 wcte11xp 24608 0 wct1xxp15904 0 wct4xxp 229312 0 tor2 89760 0 zaptel184100 10 wcusb,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wct4xxp,tor2 parport_pc 28033 0 lp 15661 0 parport38025 2 parport_pc,lp autofs423109 0 sunrpc144037 1 md5 8129 1 ipv6 242657 28 crc_ccitt 6209 1 zaptel dm_mirror 31901 0 dm_mod 60741 1 dm_mirror button 10705 0 battery12997 0 ac 8901 0 joydev 14337 0 uhci_hcd 32857 0 ehci_hcd 32325 0 tg3 101189 0 e1000 109369 0 floppy 58193 0 ext3 119113 2 jbd59609 1 ext3 raid1 19649 3 ata_piix 15557 6 libata 67613 1 ata_piix sd_mod 20545 8 scsi_mod 117709 2 libata,sd_mod On 4/4/07, Yuan LIU [EMAIL PROTECTED] wrote: From: Devraj Mukherjee [EMAIL PROTECTED] Date: Wed, 4 Apr 2007 11:46:11 +1000 Hi Eric, Thanks for your suggestion I just reinstalled Asterisk, it still doesn't seem to know anything about Zaptel. I am using CentOS and installed Asterisk using yum from ATrpms. Anything else I can try? Try lsmod to confirm that zaptel is indeed installed. I'm not familiar with CentOS or yum, but I assume you installed a binary package, so chan_zap.so is probably included. Hope this helps. Yuan Liu On 4/4/07, Eric ManxPower Wieling [EMAIL PROTECTED] wrote: Devraj Mukherjee wrote: Hi Everyone, I am using Zaptel and Asterisk 1.4 and have a Digium card with two FXS modules. The card works and ztcfg reports that it finds the two modules. Howevery when I try and place a call through the gateway I get the following error message. I have tried to refer to the ZAP device as ZAP/g2 etc Any suggestions? Anything that's different about Zaptel 1.4? -- Executing [EMAIL PROTECTED]:1] SetCDRUserField(SIP/103-b7802230, Telstra) in new stack -- Executing [EMAIL PROTECTED]:2] Dial(SIP/103-b7802230, ZAP/4/69223139) in new stack [Apr 4 10:47:43] WARNING[5659]: channel.c:3024 ast_request: No channel type registered for 'ZAP' [Apr 4 10:47:43] WARNING[5659]: app_dial.c:1090 dial_exec_full: Unable to create channel of type 'ZAP' (cause 66 - Channel not implemented) You need to reinstall Asterisk. You installed Asterisk before installing Zaptel so Asterisk did not build anything that requires Zaptel. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- I never look back darling, it distracts from the now, Edna Mode (The Incredibles) -- I never look back darling, it distracts from the now, Edna Mode (The Incredibles) ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users