[asterisk-users] function Echo() doesn't work
Hi guys, the function Echo() did work on CAPI, but doesn't work for SIP connection. Can anybody help? thanks a lot. best regards, Felix -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] function Echo() doesn't work
Did you executed Answer() before it? From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Felix Dong Sent: Wednesday, February 16, 2011 4:48 PM To: asterisk-users@lists.digium.com Subject: [asterisk-users] function Echo() doesn't work Hi guys, the function Echo() did work on CAPI, but doesn't work for SIP connection. Can anybody help? thanks a lot. best regards, Felix -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] function Echo() doesn't work
Yes, I did it. The function Echo() works both on CAPI and Datacard (UMTS Stick). Just only no echo on SIP. Any suggestion? 2011/2/16 Faisal Hanif fai...@vopium.com Did you executed Answer() before it? *From:* asterisk-users-boun...@lists.digium.com [mailto: asterisk-users-boun...@lists.digium.com] *On Behalf Of *Felix Dong *Sent:* Wednesday, February 16, 2011 4:48 PM *To:* asterisk-users@lists.digium.com *Subject:* [asterisk-users] function Echo() doesn't work Hi guys, the function Echo() did work on CAPI, but doesn't work for SIP connection. Can anybody help? thanks a lot. best regards, Felix -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] function Echo() doesn't work
Check if you have incoming SIP call in supported codec or send CLI log for further troubleshooting. From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Felix Dong Sent: Wednesday, February 16, 2011 5:14 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] function Echo() doesn't work Yes, I did it. The function Echo() works both on CAPI and Datacard (UMTS Stick). Just only no echo on SIP. Any suggestion? 2011/2/16 Faisal Hanif fai...@vopium.com Did you executed Answer() before it? From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Felix Dong Sent: Wednesday, February 16, 2011 4:48 PM To: asterisk-users@lists.digium.com Subject: [asterisk-users] function Echo() doesn't work Hi guys, the function Echo() did work on CAPI, but doesn't work for SIP connection. Can anybody help? thanks a lot. best regards, Felix -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] function Echo() doesn't work
* == Using SIP RTP CoS mark 5* *-- Executing [1174614@von-voip-provider:1] Answer(SIP/sipgate-account-, ) in new stack* *-- Executing [1174614@von-voip-provider:2] Echo(SIP/sipgate-account-, ) in new stack* * == Spawn extension (von-voip-provider, 1174614, 2) exited non-zero on 'SIP/sipgate-account-'* here is the log. It is as same as I got from CAPI and Datacard. I just didn't hear the echo from SIP connection. 2011/2/16 Faisal Hanif fai...@vopium.com Check if you have incoming SIP call in supported codec or send CLI log for further troubleshooting. *From:* asterisk-users-boun...@lists.digium.com [mailto: asterisk-users-boun...@lists.digium.com] *On Behalf Of *Felix Dong *Sent:* Wednesday, February 16, 2011 5:14 PM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] function Echo() doesn't work Yes, I did it. The function Echo() works both on CAPI and Datacard (UMTS Stick). Just only no echo on SIP. Any suggestion? 2011/2/16 Faisal Hanif fai...@vopium.com Did you executed Answer() before it? *From:* asterisk-users-boun...@lists.digium.com [mailto: asterisk-users-boun...@lists.digium.com] *On Behalf Of *Felix Dong *Sent:* Wednesday, February 16, 2011 4:48 PM *To:* asterisk-users@lists.digium.com *Subject:* [asterisk-users] function Echo() doesn't work Hi guys, the function Echo() did work on CAPI, but doesn't work for SIP connection. Can anybody help? thanks a lot. best regards, Felix -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] function Echo() doesn't work
I faced same issue for sipgate but got it resolved by allowing all codec in sipgate peer config. From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Felix Dong Sent: Wednesday, February 16, 2011 5:33 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] function Echo() doesn't work == Using SIP RTP CoS mark 5 -- Executing [1174614@von-voip-provider:1] Answer(SIP/sipgate-account-, ) in new stack -- Executing [1174614@von-voip-provider:2] Echo(SIP/sipgate-account-, ) in new stack == Spawn extension (von-voip-provider, 1174614, 2) exited non-zero on 'SIP/sipgate-account-' here is the log. It is as same as I got from CAPI and Datacard. I just didn't hear the echo from SIP connection. 2011/2/16 Faisal Hanif fai...@vopium.com Check if you have incoming SIP call in supported codec or send CLI log for further troubleshooting. From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Felix Dong Sent: Wednesday, February 16, 2011 5:14 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] function Echo() doesn't work Yes, I did it. The function Echo() works both on CAPI and Datacard (UMTS Stick). Just only no echo on SIP. Any suggestion? 2011/2/16 Faisal Hanif fai...@vopium.com Did you executed Answer() before it? From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Felix Dong Sent: Wednesday, February 16, 2011 4:48 PM To: asterisk-users@lists.digium.com Subject: [asterisk-users] function Echo() doesn't work Hi guys, the function Echo() did work on CAPI, but doesn't work for SIP connection. Can anybody help? thanks a lot. best regards, Felix -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] function Echo() doesn't work
In which conf-Data should I allow all codec? Thank u for explaining. 2011/2/16 Faisal Hanif fai...@vopium.com I faced same issue for sipgate but got it resolved by allowing all codec in sipgate peer config. *From:* asterisk-users-boun...@lists.digium.com [mailto: asterisk-users-boun...@lists.digium.com] *On Behalf Of *Felix Dong *Sent:* Wednesday, February 16, 2011 5:33 PM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] function Echo() doesn't work * == Using SIP RTP CoS mark 5* *-- Executing [1174614@von-voip-provider:1] Answer(SIP/sipgate-account-, ) in new stack* *-- Executing [1174614@von-voip-provider:2] Echo(SIP/sipgate-account-, ) in new stack* * == Spawn extension (von-voip-provider, 1174614, 2) exited non-zero on 'SIP/sipgate-account-'* here is the log. It is as same as I got from CAPI and Datacard. I just didn't hear the echo from SIP connection. 2011/2/16 Faisal Hanif fai...@vopium.com Check if you have incoming SIP call in supported codec or send CLI log for further troubleshooting. *From:* asterisk-users-boun...@lists.digium.com [mailto: asterisk-users-boun...@lists.digium.com] *On Behalf Of *Felix Dong *Sent:* Wednesday, February 16, 2011 5:14 PM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] function Echo() doesn't work Yes, I did it. The function Echo() works both on CAPI and Datacard (UMTS Stick). Just only no echo on SIP. Any suggestion? 2011/2/16 Faisal Hanif fai...@vopium.com Did you executed Answer() before it? *From:* asterisk-users-boun...@lists.digium.com [mailto: asterisk-users-boun...@lists.digium.com] *On Behalf Of *Felix Dong *Sent:* Wednesday, February 16, 2011 4:48 PM *To:* asterisk-users@lists.digium.com *Subject:* [asterisk-users] function Echo() doesn't work Hi guys, the function Echo() did work on CAPI, but doesn't work for SIP connection. Can anybody help? thanks a lot. best regards, Felix -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] function Echo() doesn't work
I tried to set allow=all in sip.conf. But it still doesn't work. 2011/2/16 Faisal Hanif fai...@vopium.com I faced same issue for sipgate but got it resolved by allowing all codec in sipgate peer config. *From:* asterisk-users-boun...@lists.digium.com [mailto: asterisk-users-boun...@lists.digium.com] *On Behalf Of *Felix Dong *Sent:* Wednesday, February 16, 2011 5:33 PM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] function Echo() doesn't work * == Using SIP RTP CoS mark 5* *-- Executing [1174614@von-voip-provider:1] Answer(SIP/sipgate-account-, ) in new stack* *-- Executing [1174614@von-voip-provider:2] Echo(SIP/sipgate-account-, ) in new stack* * == Spawn extension (von-voip-provider, 1174614, 2) exited non-zero on 'SIP/sipgate-account-'* here is the log. It is as same as I got from CAPI and Datacard. I just didn't hear the echo from SIP connection. 2011/2/16 Faisal Hanif fai...@vopium.com Check if you have incoming SIP call in supported codec or send CLI log for further troubleshooting. *From:* asterisk-users-boun...@lists.digium.com [mailto: asterisk-users-boun...@lists.digium.com] *On Behalf Of *Felix Dong *Sent:* Wednesday, February 16, 2011 5:14 PM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] function Echo() doesn't work Yes, I did it. The function Echo() works both on CAPI and Datacard (UMTS Stick). Just only no echo on SIP. Any suggestion? 2011/2/16 Faisal Hanif fai...@vopium.com Did you executed Answer() before it? *From:* asterisk-users-boun...@lists.digium.com [mailto: asterisk-users-boun...@lists.digium.com] *On Behalf Of *Felix Dong *Sent:* Wednesday, February 16, 2011 4:48 PM *To:* asterisk-users@lists.digium.com *Subject:* [asterisk-users] function Echo() doesn't work Hi guys, the function Echo() did work on CAPI, but doesn't work for SIP connection. Can anybody help? thanks a lot. best regards, Felix -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] function Echo() doesn't work
Did you make any peer for sipgate if yes then do for that peers. Please also note that disallow line should be before allow line. From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Felix Dong Sent: Wednesday, February 16, 2011 6:22 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] function Echo() doesn't work I tried to set allow=all in sip.conf. But it still doesn't work. 2011/2/16 Faisal Hanif fai...@vopium.com I faced same issue for sipgate but got it resolved by allowing all codec in sipgate peer config. From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Felix Dong Sent: Wednesday, February 16, 2011 5:33 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] function Echo() doesn't work == Using SIP RTP CoS mark 5 -- Executing [1174614@von-voip-provider:1] Answer(SIP/sipgate-account-, ) in new stack -- Executing [1174614@von-voip-provider:2] Echo(SIP/sipgate-account-, ) in new stack == Spawn extension (von-voip-provider, 1174614, 2) exited non-zero on 'SIP/sipgate-account-' here is the log. It is as same as I got from CAPI and Datacard. I just didn't hear the echo from SIP connection. 2011/2/16 Faisal Hanif fai...@vopium.com Check if you have incoming SIP call in supported codec or send CLI log for further troubleshooting. From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Felix Dong Sent: Wednesday, February 16, 2011 5:14 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] function Echo() doesn't work Yes, I did it. The function Echo() works both on CAPI and Datacard (UMTS Stick). Just only no echo on SIP. Any suggestion? 2011/2/16 Faisal Hanif fai...@vopium.com Did you executed Answer() before it? From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Felix Dong Sent: Wednesday, February 16, 2011 4:48 PM To: asterisk-users@lists.digium.com Subject: [asterisk-users] function Echo() doesn't work Hi guys, the function Echo() did work on CAPI, but doesn't work for SIP connection. Can anybody help? thanks a lot. best regards, Felix -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] function Echo() doesn't work
Yes, I did it exactly as what you said. It still doesn't work. :-( 2011/2/16 Faisal Hanif fai...@vopium.com Did you make any peer for sipgate if yes then do for that peers. Please also note that disallow line should be before allow line. *From:* asterisk-users-boun...@lists.digium.com [mailto: asterisk-users-boun...@lists.digium.com] *On Behalf Of *Felix Dong *Sent:* Wednesday, February 16, 2011 6:22 PM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] function Echo() doesn't work I tried to set allow=all in sip.conf. But it still doesn't work. 2011/2/16 Faisal Hanif fai...@vopium.com I faced same issue for sipgate but got it resolved by allowing all codec in sipgate peer config. *From:* asterisk-users-boun...@lists.digium.com [mailto: asterisk-users-boun...@lists.digium.com] *On Behalf Of *Felix Dong *Sent:* Wednesday, February 16, 2011 5:33 PM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] function Echo() doesn't work * == Using SIP RTP CoS mark 5* *-- Executing [1174614@von-voip-provider:1] Answer(SIP/sipgate-account-, ) in new stack* *-- Executing [1174614@von-voip-provider:2] Echo(SIP/sipgate-account-, ) in new stack* * == Spawn extension (von-voip-provider, 1174614, 2) exited non-zero on 'SIP/sipgate-account-'* here is the log. It is as same as I got from CAPI and Datacard. I just didn't hear the echo from SIP connection. 2011/2/16 Faisal Hanif fai...@vopium.com Check if you have incoming SIP call in supported codec or send CLI log for further troubleshooting. *From:* asterisk-users-boun...@lists.digium.com [mailto: asterisk-users-boun...@lists.digium.com] *On Behalf Of *Felix Dong *Sent:* Wednesday, February 16, 2011 5:14 PM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] function Echo() doesn't work Yes, I did it. The function Echo() works both on CAPI and Datacard (UMTS Stick). Just only no echo on SIP. Any suggestion? 2011/2/16 Faisal Hanif fai...@vopium.com Did you executed Answer() before it? *From:* asterisk-users-boun...@lists.digium.com [mailto: asterisk-users-boun...@lists.digium.com] *On Behalf Of *Felix Dong *Sent:* Wednesday, February 16, 2011 4:48 PM *To:* asterisk-users@lists.digium.com *Subject:* [asterisk-users] function Echo() doesn't work Hi guys, the function Echo() did work on CAPI, but doesn't work for SIP connection. Can anybody help? thanks a lot. best regards, Felix -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] function Echo() doesn't work
Hi Felix, Am Mittwoch, den 16.02.2011, 12:47 +0100 schrieb Felix Dong: Hi guys, the function Echo() did work on CAPI, but doesn't work for SIP connection. Can anybody help? thanks a lot. are You trying to echo between local phones or is it a external call via some VoIP Provider? In latter case: do You forward the RTP traffic from external to Your asterisk? The relevant ports can be configured in rtp.conf. Configure at least 4 ports per connection. Configure port forwarding for this range of UDP ports in Youe NAT-device (e.g. router or firewall). HTH, Karsten best regards, Felix -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users