Re: [asterisk-users] new install of asterisk appliance.
I have 1 nic card which is linked to the router. Then I use 1 port on the router which is linked to the asterisk appliance. It will work via WAN which ive now got. SO I can access the asterisk appliance via 192.168.1.15 The problem is now…How do I connect the phone. Ive got the phone (Ethernet) connected from the LAN port on the phone to a LAN port in the asterisk appliance. The short answer is that if you're not using the AA50 as a router you cannot use the LAN ports on the AA50. You'll have to connect your phone to a LAN port on your switch. As Rob mentioned, you'll need to configure the Grandstream manually. Also, if your SBS server or your router is providing DHCP be sure to turn off DHCP on the AA50. - Noah ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] new install of asterisk appliance.
The Asterisk appliance can currently only auto-provision Polycom phones, so you're going to need to manually configure the Grandstream phones. Sydney Web Hosting wrote: I have 1 nic card which is linked to the router. Then I use 1 port on the router which is linked to the asterisk appliance. but as Rob hillis said. It will work via WAN which ive now got. SO I can access the asterisk appliance via 192.168.1.15 The problem is now…How do I connect the phone. Ive got the phone (Ethernet) connected from the LAN port on the phone to a LAN port in the asterisk appliance. im using the grandstream 2020. *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Thursday, 3 July 2008 12:03 PM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] new install of asterisk appliance. Ok so as you describe it you are only using 1 nic card in your sbs2003 server? But you have two devices connected to it? Care to explain? Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 9:14 PM *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' *Subject:* Re: [asterisk-users] new install of asterisk appliance. I agree. ;-) here is our setup. Router | | SBS server 2003 Nic 1 | 4port gb switch | | | | Pc’sAsterisk server *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Thursday, 3 July 2008 10:22 AM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] new install of asterisk appliance. Davey, not to second guess you but sounds like you don’t have a clue. This is the way I have my network setup. Router | | SBS server 2003 Nic 1 SBS server 2003 Nic 2 | | 16port gb switch | | | | Pc’sAsterisk server Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 8:13 PM *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' *Subject:* Re: [asterisk-users] new install of asterisk appliance. Netcomm is directly connected to the server via server network card. ive now got it up and running. I changed the WAN info in asterisk appliance, not the LAN info. Now the phone wont get connected. Ive added an ip directly into phone with correct settings. but when I access it via web browser it doesn’t come up. Should I be able to access it. *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Thursday, 3 July 2008 9:40 AM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] new install of asterisk appliance. But where is the windows 2003 server? Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 7:20 PM *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' *Subject:* Re: [asterisk-users] new install of asterisk appliance. No. ive got the netcomm router. of the netcomm router ive got 1 LAN port going into the WAN port of the appliance. Then 1 LAn port from the appliance goes to my PC. *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Thursday, 3 July 2008 8:22 AM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] new install of asterisk appliance. Can you ping the ip address from another machine on your lan. Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 5:59 PM *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' *Subject:* Re: [asterisk-users] new install of asterisk appliance. Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? Yes this is correct. The range is actually 192.168.1.1 to 192.168.1.254 *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Wednesday, 2 July 2008 10:18 PM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] new install of asterisk appliance. Hi Davey, Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct
Re: [asterisk-users] new install of asterisk appliance.
My suggestion is you implement sbs2003 the correct way with a 2 nic solution. Yes a 1 nic installation is possible but you lose all the benefits. Tell whoever set it up to tear it down and implement it properly. Cheers, Dean -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rob Hillis Sent: Thursday, 3 July 2008 2:46 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. The Asterisk appliance can currently only auto-provision Polycom phones, so you're going to need to manually configure the Grandstream phones. Sydney Web Hosting wrote: I have 1 nic card which is linked to the router. Then I use 1 port on the router which is linked to the asterisk appliance. but as Rob hillis said. It will work via WAN which ive now got. SO I can access the asterisk appliance via 192.168.1.15 The problem is now...How do I connect the phone. Ive got the phone (Ethernet) connected from the LAN port on the phone to a LAN port in the asterisk appliance. im using the grandstream 2020. *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Thursday, 3 July 2008 12:03 PM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] new install of asterisk appliance. Ok so as you describe it you are only using 1 nic card in your sbs2003 server? But you have two devices connected to it? Care to explain? Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 9:14 PM *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' *Subject:* Re: [asterisk-users] new install of asterisk appliance. I agree. ;-) here is our setup. Router | | SBS server 2003 Nic 1 | 4port gb switch | | | | Pc'sAsterisk server *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Thursday, 3 July 2008 10:22 AM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] new install of asterisk appliance. Davey, not to second guess you but sounds like you don't have a clue. This is the way I have my network setup. Router | | SBS server 2003 Nic 1 SBS server 2003 Nic 2 | | 16port gb switch | | | | Pc'sAsterisk server Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 8:13 PM *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' *Subject:* Re: [asterisk-users] new install of asterisk appliance. Netcomm is directly connected to the server via server network card. ive now got it up and running. I changed the WAN info in asterisk appliance, not the LAN info. Now the phone wont get connected. Ive added an ip directly into phone with correct settings. but when I access it via web browser it doesn't come up. Should I be able to access it. *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Thursday, 3 July 2008 9:40 AM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] new install of asterisk appliance. But where is the windows 2003 server? Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 7:20 PM *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' *Subject:* Re: [asterisk-users] new install of asterisk appliance. No. ive got the netcomm router. of the netcomm router ive got 1 LAN port going into the WAN port of the appliance. Then 1 LAn port from the appliance goes to my PC. *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Thursday, 3 July 2008 8:22 AM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] new install of asterisk appliance. Can you ping the ip address from another machine on your lan. Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 5:59 PM *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' *Subject:* Re: [asterisk-users] new install of asterisk appliance. Just confirming that 192.168.1.1
[asterisk-users] new install of asterisk appliance.
Hi All, Ive just purchased an asterisk appliance. (AA50) ive connected the AA50 to my pc directly via Ethernet and logged in via 192.168.169.1 and I can log in fine. But then when I go into the asterisk gui network to change the settings to get it on our LAN im having trouble. It just won't connect via the ip address ive assigned it of 192.168.1.15 Im on a windows network. (sbs2003 server) The changes Ive made in asterisk are as follows. (Under lan) IP = 192.168.1.15 DNS = 192.168.1.1 IP start range = 192.168.1.15 END range = 192.168.1.150 Im assuming that I have to change this info so I can access it via the network, rather than to have it connected to my pc all of the time. What am I doing wrong? Regards Davey. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] new install of asterisk appliance.
Hi Davey, Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? (and not a new address range that you didn't configure properly in sbs2003 - also I'm assuming you are using Isa2004 as well correct?) Cheers, Dean From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 8:05 AM To: asterisk-users@lists.digium.com Subject: [asterisk-users] new install of asterisk appliance. Hi All, Ive just purchased an asterisk appliance. (AA50) ive connected the AA50 to my pc directly via Ethernet and logged in via 192.168.169.1 and I can log in fine. But then when I go into the asterisk gui network to change the settings to get it on our LAN im having trouble. It just won't connect via the ip address ive assigned it of 192.168.1.15 Im on a windows network. (sbs2003 server) The changes Ive made in asterisk are as follows. (Under lan) IP = 192.168.1.15 DNS = 192.168.1.1 IP start range = 192.168.1.15 END range = 192.168.1.150 Im assuming that I have to change this info so I can access it via the network, rather than to have it connected to my pc all of the time. What am I doing wrong? Regards Davey. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] new install of asterisk appliance.
On Wed, Jul 2, 2008 at 8:05 AM, Sydney Web Hosting [EMAIL PROTECTED] wrote: Hi All, Ive just purchased an asterisk appliance. (AA50) ive connected the AA50 to my pc directly via Ethernet and logged in via 192.168.169.1 and I can log in fine. But then when I go into the asterisk gui network to change the settings to get it on our LAN im having trouble. It just won't connect via the ip address ive assigned it of 192.168.1.15 Im on a windows network. (sbs2003 server) The changes Ive made in asterisk are as follows. (Under lan) IP = 192.168.1.15 DNS = 192.168.1.1 IP start range = 192.168.1.15 END range = 192.168.1.150 Im assuming that I have to change this info so I can access it via the network, rather than to have it connected to my pc all of the time. What am I doing wrong? First, can you ping 192.168.1.15 from the LAN, not your PC? Shut down the appliance and try to ping 192.168.1.15, if you get replies, then you have an IP conflict. When you changed your network settings on the appliance, did you restart the box? I am not sure if this unit makes netchanges on the fly. Can you get root on the box (of course you can), just hand edit your ethX config. BUT, first, I would call the vendor, in this case Digium. I am sure they can help you. Thanks, Steve Totaro ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] new install of asterisk appliance.
Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? Yes this is correct. The range is actually 192.168.1.1 to 192.168.1.254 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Wednesday, 2 July 2008 10:18 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Hi Davey, Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? (and not a new address range that you didn't configure properly in sbs2003 - also I'm assuming you are using Isa2004 as well correct?) Cheers, Dean _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 8:05 AM To: asterisk-users@lists.digium.com Subject: [asterisk-users] new install of asterisk appliance. Hi All, Ive just purchased an asterisk appliance. (AA50) ive connected the AA50 to my pc directly via Ethernet and logged in via 192.168.169.1 and I can log in fine. But then when I go into the asterisk gui network to change the settings to get it on our LAN im having trouble. It just won't connect via the ip address ive assigned it of 192.168.1.15 Im on a windows network. (sbs2003 server) The changes Ive made in asterisk are as follows. (Under lan) IP = 192.168.1.15 DNS = 192.168.1.1 IP start range = 192.168.1.15 END range = 192.168.1.150 Im assuming that I have to change this info so I can access it via the network, rather than to have it connected to my pc all of the time. What am I doing wrong? Regards Davey. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] new install of asterisk appliance.
Can you ping the ip address from another machine on your lan. Cheers, Dean From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 5:59 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? Yes this is correct. The range is actually 192.168.1.1 to 192.168.1.254 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Wednesday, 2 July 2008 10:18 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Hi Davey, Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? (and not a new address range that you didn't configure properly in sbs2003 - also I'm assuming you are using Isa2004 as well correct?) Cheers, Dean From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 8:05 AM To: asterisk-users@lists.digium.com Subject: [asterisk-users] new install of asterisk appliance. Hi All, Ive just purchased an asterisk appliance. (AA50) ive connected the AA50 to my pc directly via Ethernet and logged in via 192.168.169.1 and I can log in fine. But then when I go into the asterisk gui network to change the settings to get it on our LAN im having trouble. It just won't connect via the ip address ive assigned it of 192.168.1.15 Im on a windows network. (sbs2003 server) The changes Ive made in asterisk are as follows. (Under lan) IP = 192.168.1.15 DNS = 192.168.1.1 IP start range = 192.168.1.15 END range = 192.168.1.150 Im assuming that I have to change this info so I can access it via the network, rather than to have it connected to my pc all of the time. What am I doing wrong? Regards Davey. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] new install of asterisk appliance.
No. ive got the netcomm router. of the netcomm router ive got 1 LAN port going into the WAN port of the appliance. Then 1 LAn port from the appliance goes to my PC. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Thursday, 3 July 2008 8:22 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Can you ping the ip address from another machine on your lan. Cheers, Dean _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 5:59 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? Yes this is correct. The range is actually 192.168.1.1 to 192.168.1.254 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Wednesday, 2 July 2008 10:18 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Hi Davey, Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? (and not a new address range that you didn't configure properly in sbs2003 - also I'm assuming you are using Isa2004 as well correct?) Cheers, Dean _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 8:05 AM To: asterisk-users@lists.digium.com Subject: [asterisk-users] new install of asterisk appliance. Hi All, Ive just purchased an asterisk appliance. (AA50) ive connected the AA50 to my pc directly via Ethernet and logged in via 192.168.169.1 and I can log in fine. But then when I go into the asterisk gui network to change the settings to get it on our LAN im having trouble. It just won't connect via the ip address ive assigned it of 192.168.1.15 Im on a windows network. (sbs2003 server) The changes Ive made in asterisk are as follows. (Under lan) IP = 192.168.1.15 DNS = 192.168.1.1 IP start range = 192.168.1.15 END range = 192.168.1.150 Im assuming that I have to change this info so I can access it via the network, rather than to have it connected to my pc all of the time. What am I doing wrong? Regards Davey. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] new install of asterisk appliance.
But where is the windows 2003 server? Cheers, Dean From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 7:20 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. No. ive got the netcomm router. of the netcomm router ive got 1 LAN port going into the WAN port of the appliance. Then 1 LAn port from the appliance goes to my PC. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Thursday, 3 July 2008 8:22 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Can you ping the ip address from another machine on your lan. Cheers, Dean From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 5:59 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? Yes this is correct. The range is actually 192.168.1.1 to 192.168.1.254 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Wednesday, 2 July 2008 10:18 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Hi Davey, Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? (and not a new address range that you didn't configure properly in sbs2003 - also I'm assuming you are using Isa2004 as well correct?) Cheers, Dean From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 8:05 AM To: asterisk-users@lists.digium.com Subject: [asterisk-users] new install of asterisk appliance. Hi All, Ive just purchased an asterisk appliance. (AA50) ive connected the AA50 to my pc directly via Ethernet and logged in via 192.168.169.1 and I can log in fine. But then when I go into the asterisk gui network to change the settings to get it on our LAN im having trouble. It just won't connect via the ip address ive assigned it of 192.168.1.15 Im on a windows network. (sbs2003 server) The changes Ive made in asterisk are as follows. (Under lan) IP = 192.168.1.15 DNS = 192.168.1.1 IP start range = 192.168.1.15 END range = 192.168.1.150 Im assuming that I have to change this info so I can access it via the network, rather than to have it connected to my pc all of the time. What am I doing wrong? Regards Davey. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] new install of asterisk appliance.
Netcomm is directly connected to the server via server network card. ive now got it up and running. I changed the WAN info in asterisk appliance, not the LAN info. Now the phone wont get connected. Ive added an ip directly into phone with correct settings. but when I access it via web browser it doesn't come up. Should I be able to access it. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Thursday, 3 July 2008 9:40 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. But where is the windows 2003 server? Cheers, Dean _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 7:20 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. No. ive got the netcomm router. of the netcomm router ive got 1 LAN port going into the WAN port of the appliance. Then 1 LAn port from the appliance goes to my PC. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Thursday, 3 July 2008 8:22 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Can you ping the ip address from another machine on your lan. Cheers, Dean _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 5:59 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? Yes this is correct. The range is actually 192.168.1.1 to 192.168.1.254 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Wednesday, 2 July 2008 10:18 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Hi Davey, Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? (and not a new address range that you didn't configure properly in sbs2003 - also I'm assuming you are using Isa2004 as well correct?) Cheers, Dean _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 8:05 AM To: asterisk-users@lists.digium.com Subject: [asterisk-users] new install of asterisk appliance. Hi All, Ive just purchased an asterisk appliance. (AA50) ive connected the AA50 to my pc directly via Ethernet and logged in via 192.168.169.1 and I can log in fine. But then when I go into the asterisk gui network to change the settings to get it on our LAN im having trouble. It just won't connect via the ip address ive assigned it of 192.168.1.15 Im on a windows network. (sbs2003 server) The changes Ive made in asterisk are as follows. (Under lan) IP = 192.168.1.15 DNS = 192.168.1.1 IP start range = 192.168.1.15 END range = 192.168.1.150 Im assuming that I have to change this info so I can access it via the network, rather than to have it connected to my pc all of the time. What am I doing wrong? Regards Davey. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] new install of asterisk appliance.
Davey, not to second guess you but sounds like you don't have a clue. This is the way I have my network setup. Router | | SBS server 2003 Nic 1 SBS server 2003 Nic 2 | | 16port gb switch | | | | Pc'sAsterisk server Cheers, Dean From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 8:13 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. Netcomm is directly connected to the server via server network card. ive now got it up and running. I changed the WAN info in asterisk appliance, not the LAN info. Now the phone wont get connected. Ive added an ip directly into phone with correct settings. but when I access it via web browser it doesn't come up. Should I be able to access it. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Thursday, 3 July 2008 9:40 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. But where is the windows 2003 server? Cheers, Dean From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 7:20 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. No. ive got the netcomm router. of the netcomm router ive got 1 LAN port going into the WAN port of the appliance. Then 1 LAn port from the appliance goes to my PC. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Thursday, 3 July 2008 8:22 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Can you ping the ip address from another machine on your lan. Cheers, Dean From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 5:59 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? Yes this is correct. The range is actually 192.168.1.1 to 192.168.1.254 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Wednesday, 2 July 2008 10:18 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Hi Davey, Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? (and not a new address range that you didn't configure properly in sbs2003 - also I'm assuming you are using Isa2004 as well correct?) Cheers, Dean From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 8:05 AM To: asterisk-users@lists.digium.com Subject: [asterisk-users] new install of asterisk appliance. Hi All, Ive just purchased an asterisk appliance. (AA50) ive connected the AA50 to my pc directly via Ethernet and logged in via 192.168.169.1 and I can log in fine. But then when I go into the asterisk gui network to change the settings to get it on our LAN im having trouble. It just won't connect via the ip address ive assigned it of 192.168.1.15 Im on a windows network. (sbs2003 server) The changes Ive made in asterisk are as follows. (Under lan) IP = 192.168.1.15 DNS = 192.168.1.1 IP start range = 192.168.1.15 END range = 192.168.1.150 Im assuming that I have to change this info so I can access it via the network, rather than to have it connected to my pc all of the time. What am I doing wrong? Regards Davey. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] new install of asterisk appliance.
I agree. ;-) here is our setup. Router | | SBS server 2003 Nic 1 | 4port gb switch | | | | Pc'sAsterisk server From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Thursday, 3 July 2008 10:22 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Davey, not to second guess you but sounds like you don't have a clue. This is the way I have my network setup. Router | | SBS server 2003 Nic 1 SBS server 2003 Nic 2 | | 16port gb switch | | | | Pc'sAsterisk server Cheers, Dean _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 8:13 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. Netcomm is directly connected to the server via server network card. ive now got it up and running. I changed the WAN info in asterisk appliance, not the LAN info. Now the phone wont get connected. Ive added an ip directly into phone with correct settings. but when I access it via web browser it doesn't come up. Should I be able to access it. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Thursday, 3 July 2008 9:40 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. But where is the windows 2003 server? Cheers, Dean _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 7:20 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. No. ive got the netcomm router. of the netcomm router ive got 1 LAN port going into the WAN port of the appliance. Then 1 LAn port from the appliance goes to my PC. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Thursday, 3 July 2008 8:22 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Can you ping the ip address from another machine on your lan. Cheers, Dean _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 5:59 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? Yes this is correct. The range is actually 192.168.1.1 to 192.168.1.254 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Wednesday, 2 July 2008 10:18 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Hi Davey, Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? (and not a new address range that you didn't configure properly in sbs2003 - also I'm assuming you are using Isa2004 as well correct?) Cheers, Dean _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 8:05 AM To: asterisk-users@lists.digium.com Subject: [asterisk-users] new install of asterisk appliance. Hi All, Ive just purchased an asterisk appliance. (AA50) ive connected the AA50 to my pc directly via Ethernet and logged in via 192.168.169.1 and I can log in fine. But then when I go into the asterisk gui network to change the settings to get it on our LAN im having trouble. It just won't connect via the ip address ive assigned it of 192.168.1.15 Im on a windows network. (sbs2003 server) The changes Ive made in asterisk are as follows. (Under lan) IP = 192.168.1.15 DNS = 192.168.1.1 IP start range = 192.168.1.15 END range = 192.168.1.150 Im assuming that I have to change this info so I can access it via the network, rather than to have it connected to my pc all of the time. What am I doing wrong? Regards Davey. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] new install of asterisk appliance.
The Asterisk appliance is a but naughty - is really like the idea of handling DHCP on it's lan ports (and having the phones on them) and hooking up the WAN port to your local network. I have heard you can get around this, but it's a bit of work. (no personal experience) Paul Hales NTS Dean Collins wrote: Davey, not to second guess you but sounds like you don’t have a clue. This is the way I have my network setup. Router | | SBS server 2003 Nic 1 SBS server 2003 Nic 2 | | 16port gb switch | | | | Pc’s Asterisk server Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 8:13 PM *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' *Subject:* Re: [asterisk-users] new install of asterisk appliance. Netcomm is directly connected to the server via server network card. ive now got it up and running. I changed the WAN info in asterisk appliance, not the LAN info. Now the phone wont get connected. Ive added an ip directly into phone with correct settings. but when I access it via web browser it doesn’t come up. Should I be able to access it. *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Thursday, 3 July 2008 9:40 AM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] new install of asterisk appliance. But where is the windows 2003 server? Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 7:20 PM *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' *Subject:* Re: [asterisk-users] new install of asterisk appliance. No. ive got the netcomm router. of the netcomm router ive got 1 LAN port going into the WAN port of the appliance. Then 1 LAn port from the appliance goes to my PC. *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Thursday, 3 July 2008 8:22 AM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] new install of asterisk appliance. Can you ping the ip address from another machine on your lan. Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 5:59 PM *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' *Subject:* Re: [asterisk-users] new install of asterisk appliance. Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? Yes this is correct. The range is actually 192.168.1.1 to 192.168.1.254 *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Wednesday, 2 July 2008 10:18 PM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] new install of asterisk appliance. Hi Davey, Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? (and not a new address range that you didn’t configure properly in sbs2003 – also I’m assuming you are using Isa2004 as well correct?) Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 8:05 AM *To:* asterisk-users@lists.digium.com *Subject:* [asterisk-users] new install of asterisk appliance. Hi All, Ive just purchased an asterisk appliance. (AA50) ive connected the AA50 to my pc directly via Ethernet and logged in via 192.168.169.1 and I can log in fine. But then when I go into the asterisk gui network to change the settings to get it on our LAN im having trouble. It just won’t connect via the ip address ive assigned it of 192.168.1.15 Im on a windows network. (sbs2003 server) The changes Ive made in asterisk are as follows. (Under lan) IP = 192.168.1.15 DNS = 192.168.1.1 IP start range = 192.168.1.15 END range = 192.168.1.150 Im assuming that I have to change this info so I can access it via the network, rather than to have it connected to my pc all of the time. What am I doing wrong? Regards Davey. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] new install of asterisk appliance.
Ok so as you describe it you are only using 1 nic card in your sbs2003 server? But you have two devices connected to it? Care to explain? Cheers, Dean From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 9:14 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. I agree. ;-) here is our setup. Router | | SBS server 2003 Nic 1 | 4port gb switch | | | | Pc'sAsterisk server From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Thursday, 3 July 2008 10:22 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Davey, not to second guess you but sounds like you don't have a clue. This is the way I have my network setup. Router | | SBS server 2003 Nic 1 SBS server 2003 Nic 2 | | 16port gb switch | | | | Pc'sAsterisk server Cheers, Dean From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 8:13 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. Netcomm is directly connected to the server via server network card. ive now got it up and running. I changed the WAN info in asterisk appliance, not the LAN info. Now the phone wont get connected. Ive added an ip directly into phone with correct settings. but when I access it via web browser it doesn't come up. Should I be able to access it. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Thursday, 3 July 2008 9:40 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. But where is the windows 2003 server? Cheers, Dean From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 7:20 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. No. ive got the netcomm router. of the netcomm router ive got 1 LAN port going into the WAN port of the appliance. Then 1 LAn port from the appliance goes to my PC. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Thursday, 3 July 2008 8:22 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Can you ping the ip address from another machine on your lan. Cheers, Dean From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 5:59 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? Yes this is correct. The range is actually 192.168.1.1 to 192.168.1.254 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Wednesday, 2 July 2008 10:18 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Hi Davey, Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? (and not a new address range that you didn't configure properly in sbs2003 - also I'm assuming you are using Isa2004 as well correct?) Cheers, Dean From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 8:05 AM To: asterisk-users@lists.digium.com Subject: [asterisk-users] new install of asterisk appliance. Hi All, Ive just purchased an asterisk appliance. (AA50) ive connected the AA50 to my pc directly via Ethernet and logged in via 192.168.169.1 and I can log in fine. But then when I go into the asterisk gui network to change the settings to get it on our LAN im having trouble. It just won't connect via the ip address ive assigned it of 192.168.1.15 Im on a windows network. (sbs2003 server) The changes Ive made in asterisk are as follows. (Under lan) IP = 192.168.1.15 DNS = 192.168.1.1 IP start range = 192.168.1.15 END range = 192.168.1.150 Im assuming that I have to change this info so I can access it via the network, rather than to have it connected to my pc all of the time. What am I doing wrong? Regards Davey. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com
Re: [asterisk-users] new install of asterisk appliance.
Yeah, it's a real pain in the proverbial. Short version is that if you're not planning on using the LAN interface for phones then you need to enable provisioning on the WAN interface, allow access to the web interface from the WAN interface and configure the provisioning URL with your WAN interface's IP address. You /will/ need to use the WAN interface in order to be able to access the appliance from any subnet other than the one you're directly connected to since you can't set a default gateway that's on the LAN interface (/don't/ try and configure the LAN and WAN interfaces to be part of the same network - that's a guaranteed way to get the appliance upset with you!) I spent a good few hours on my first appliance tearing my hair out trying to work this one through! To make it easy on yourself, wherever possible /always/ keep phones on the LAN interface - but that LAN interface needs to be separate from your production LAN unless you're planning on using the Asterisk appliance as your router. Paul Hales wrote: The Asterisk appliance is a but naughty - is really like the idea of handling DHCP on it's lan ports (and having the phones on them) and hooking up the WAN port to your local network. I have heard you can get around this, but it's a bit of work. (no personal experience) Paul Hales NTS Dean Collins wrote: Davey, not to second guess you but sounds like you don’t have a clue. This is the way I have my network setup. Router | | SBS server 2003 Nic 1 SBS server 2003 Nic 2 | | 16port gb switch | | | | Pc’s Asterisk server Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 8:13 PM *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' *Subject:* Re: [asterisk-users] new install of asterisk appliance. Netcomm is directly connected to the server via server network card. ive now got it up and running. I changed the WAN info in asterisk appliance, not the LAN info. Now the phone wont get connected. Ive added an ip directly into phone with correct settings. but when I access it via web browser it doesn’t come up. Should I be able to access it. *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Thursday, 3 July 2008 9:40 AM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] new install of asterisk appliance. But where is the windows 2003 server? Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 7:20 PM *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' *Subject:* Re: [asterisk-users] new install of asterisk appliance. No. ive got the netcomm router. of the netcomm router ive got 1 LAN port going into the WAN port of the appliance. Then 1 LAn port from the appliance goes to my PC. *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Thursday, 3 July 2008 8:22 AM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] new install of asterisk appliance. Can you ping the ip address from another machine on your lan. Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 5:59 PM *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' *Subject:* Re: [asterisk-users] new install of asterisk appliance. Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? Yes this is correct. The range is actually 192.168.1.1 to 192.168.1.254 *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Wednesday, 2 July 2008 10:18 PM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] new install of asterisk appliance. Hi Davey, Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? (and not a new address range that you didn’t configure properly in sbs2003 – also I’m assuming you are using Isa2004 as well correct?) Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 8:05 AM *To:* asterisk-users@lists.digium.com *Subject:* [asterisk-users] new install of asterisk appliance. Hi All, Ive just purchased an asterisk appliance. (AA50) ive connected the AA50 to my pc directly via Ethernet and logged in via 192.168.169.1 and I can log in fine
Re: [asterisk-users] new install of asterisk appliance.
The Vdex-40 handles 35 extensions and 4 FXO's but that's because it's dual cpu. http://www.taa.com/products-vdex-40.html Cheers, Dean -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rob Hillis Sent: Wednesday, 2 July 2008 11:25 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. The Asterisk appliance has it's place. Once you understand the restrictions and/or design limitations, it does it's job just fine. After a few teething problems, it ran just fine. Certainly for future installs where there are a few PSTN lines, I'll be considering the Asterisk appliance for the job. Yes, I like the flexibility of modifying the dialplan directly, but for smaller installs something like the Asterisk Appliance fits just fine and isn't as much overkill of a full Asterisk install on a half-decent server. Problem is that the middle ground - Asterisk on a desktop machine - isn't something I'd recommend to /anyone/. The appliance should handle up to 20 extensions without too much problem (I know they say it'll do up to 50, but with the embedded processor it has, I find that hard to believe) and for anything beyond that, it's worthwhile dropping an extra few hundred for a decent low-end server. Michael Graves wrote: This thread makes me glad that I've avoided the Asterisk Appliance and Asterisk GUI. I have a similar installation using Astlinux and had not trouble defeating the router function. With Lonnie Abelbeck's revised web interface it's a pleasrue to configure. Michael On Thu, 03 Jul 2008 12:39:15 +1000, Rob Hillis wrote: Yeah, it's a real pain in the proverbial. Short version is that if you're not planning on using the LAN interface for phones then you need to enable provisioning on the WAN interface, allow access to the web interface from the WAN interface and configure the provisioning URL with your WAN interface's IP address. You /will/ need to use the WAN interface in order to be able to access the appliance from any subnet other than the one you're directly connected to since you can't set a default gateway that's on the LAN interface (/don't/ try and configure the LAN and WAN interfaces to be part of the same network - that's a guaranteed way to get the appliance upset with you!) I spent a good few hours on my first appliance tearing my hair out trying to work this one through! To make it easy on yourself, wherever possible /always/ keep phones on the LAN interface - but that LAN interface needs to be separate from your production LAN unless you're planning on using the Asterisk appliance as your router. Paul Hales wrote: The Asterisk appliance is a but naughty - is really like the idea of handling DHCP on it's lan ports (and having the phones on them) and hooking up the WAN port to your local network. I have heard you can get around this, but it's a bit of work. (no personal experience) Paul Hales NTS Dean Collins wrote: Davey, not to second guess you but sounds like you don't have a clue. This is the way I have my network setup. Router | | SBS server 2003 Nic 1 SBS server 2003 Nic 2 | | 16port gb switch | | | | Pc's Asterisk server Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 8:13 PM *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' *Subject:* Re: [asterisk-users] new install of asterisk appliance. Netcomm is directly connected to the server via server network card. ive now got it up and running. I changed the WAN info in asterisk appliance, not the LAN info. Now the phone wont get connected. Ive added an ip directly into phone with correct settings. but when I access it via web browser it doesn't come up. Should I be able to access it. *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Thursday, 3 July 2008 9:40 AM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] new install of asterisk appliance. But where is the windows 2003 server? Cheers, Dean *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Sydney Web Hosting *Sent:* Wednesday, 2 July 2008 7:20 PM *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion' *Subject:* Re: [asterisk-users] new install of asterisk appliance. No. ive got the netcomm router. of the netcomm router ive got 1 LAN port going into the WAN port of the appliance. Then 1 LAn port from the appliance goes to my PC. *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Dean Collins *Sent:* Thursday, 3 July 2008
Re: [asterisk-users] new install of asterisk appliance.
I have 1 nic card which is linked to the router. Then I use 1 port on the router which is linked to the asterisk appliance. but as Rob hillis said. It will work via WAN which ive now got. SO I can access the asterisk appliance via 192.168.1.15 The problem is now.How do I connect the phone. Ive got the phone (Ethernet) connected from the LAN port on the phone to a LAN port in the asterisk appliance. im using the grandstream 2020. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Thursday, 3 July 2008 12:03 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Ok so as you describe it you are only using 1 nic card in your sbs2003 server? But you have two devices connected to it? Care to explain? Cheers, Dean _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 9:14 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. I agree. ;-) here is our setup. Router | | SBS server 2003 Nic 1 | 4port gb switch | | | | Pc'sAsterisk server From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Thursday, 3 July 2008 10:22 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Davey, not to second guess you but sounds like you don't have a clue. This is the way I have my network setup. Router | | SBS server 2003 Nic 1 SBS server 2003 Nic 2 | | 16port gb switch | | | | Pc'sAsterisk server Cheers, Dean _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 8:13 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. Netcomm is directly connected to the server via server network card. ive now got it up and running. I changed the WAN info in asterisk appliance, not the LAN info. Now the phone wont get connected. Ive added an ip directly into phone with correct settings. but when I access it via web browser it doesn't come up. Should I be able to access it. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Thursday, 3 July 2008 9:40 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. But where is the windows 2003 server? Cheers, Dean _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 7:20 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. No. ive got the netcomm router. of the netcomm router ive got 1 LAN port going into the WAN port of the appliance. Then 1 LAn port from the appliance goes to my PC. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Thursday, 3 July 2008 8:22 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Can you ping the ip address from another machine on your lan. Cheers, Dean _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 5:59 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] new install of asterisk appliance. Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? Yes this is correct. The range is actually 192.168.1.1 to 192.168.1.254 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Collins Sent: Wednesday, 2 July 2008 10:18 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] new install of asterisk appliance. Hi Davey, Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? (and not a new address range that you didn't configure properly in sbs2003 - also I'm assuming you are using Isa2004 as well correct?) Cheers, Dean _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 8:05 AM To: asterisk-users@lists.digium.com Subject: [asterisk-users] new install of asterisk appliance. Hi All, Ive just purchased an asterisk appliance. (AA50) ive connected the AA50 to my pc directly via Ethernet and logged in via 192.168.169.1 and I can log in fine. But then when I go into the asterisk gui network to change the settings to get it on our LAN im having trouble. It just won't