Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13 [ Virusgeprüft]
Hi, sure in an small office you can use iaxmodem/hylafax to receive faxes - we use it for sending faxes, but would you try to set up about 100 iaxmodems inside hylafax if you can handle it directly inside asterisk with rx_fax and a small script ? [EMAIL PROTECTED] schrieb am 20.12.2006 02:17:22: Hi, No IaxModem is only a modem simulator. Let asterisk do the difference, and send it to you iax extension... @++. Jean-Yves Avenard a écrit : Hi On 12/20/06, Lee Howard [EMAIL PROTECTED] wrote: This thread seems like an awfully crazy amount of work to get fax working when using IAXmodem and HylaFAX would do it without the headache, most likely. Does IAXmodem allows you to receive faxes with any extensions (auto-detecting incoming faxes). JY ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Diese E-Mail und alle Anhänge enthalten vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese E-Mail und ihren Inhalt. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser E-Mail ist nicht gestattet. This e-mail and any attached files may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail by mistake) please notify the sender immediately and delete this e-mail. Any unauthorised duplication, disclosure or distribution of this e-mail and content is strictly forbidden. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13
Hi On 12/20/06, Lee Howard [EMAIL PROTECTED] wrote: Sure, I guess. The fax detection part comes from Asterisk or OpenPBX or whatever. Same as with rxfax/txfax, etc. Well, I know have Hylafax and iaxmodem running on my machine. Works really well so far and with spandsp 0.0.3 Will see how it goes with international fax transfer. Now when can we expect txfax and rxfax to work again? ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13
This thread seems like an awfully crazy amount of work to get fax working when using IAXmodem and HylaFAX would do it without the headache, most likely. Lee. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13
Hi On 12/20/06, Lee Howard [EMAIL PROTECTED] wrote: This thread seems like an awfully crazy amount of work to get fax working when using IAXmodem and HylaFAX would do it without the headache, most likely. Does IAXmodem allows you to receive faxes with any extensions (auto-detecting incoming faxes). JY ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13
Hi, No IaxModem is only a modem simulator. Let asterisk do the difference, and send it to you iax extension... @++. Jean-Yves Avenard a écrit : Hi On 12/20/06, Lee Howard [EMAIL PROTECTED] wrote: This thread seems like an awfully crazy amount of work to get fax working when using IAXmodem and HylaFAX would do it without the headache, most likely. Does IAXmodem allows you to receive faxes with any extensions (auto-detecting incoming faxes). JY ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13
Jean-Yves Avenard wrote: Hi On 12/20/06, Lee Howard [EMAIL PROTECTED] wrote: This thread seems like an awfully crazy amount of work to get fax working when using IAXmodem and HylaFAX would do it without the headache, most likely. Does IAXmodem allows you to receive faxes with any extensions (auto-detecting incoming faxes). Sure, I guess. The fax detection part comes from Asterisk or OpenPBX or whatever. Same as with rxfax/txfax, etc. Lee. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13
Hi Last month, people reported a crash with Asterisk 1.2.13 and spandsp-0.0.3 when receiving a fax using fax detection. Today I've tried 1.2.14 with the latest spandsp 0.0.3pre27 and with the snapshots for app_rxfax.c and app_txfax.c. The problem still happens. Has anyone found how to resolve this issue? I tried emailing Steve Underwood (with crash backtrace) but he hasn't answered... Otherwise, have you found spandsp 0.0.3 to provide better fax reception quality than 0.0.2? While I've had no problem with 0.0.2 locally, it usually fails when we receive faxes from overseas :( Thanks Regards Jean-Yves ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13
Hi, I am using CentOS 4.4 [ asterisk-1.2.12.1 ] I too had problems with RxFax application. I tried spandsp-0.0.2pre26 spandsp-0.0.3pre23 .0.2 could install, but it crashed .0.3 doesnt install Finally I got 0.0.2pre26 running on debian sarge 3.1, without a crash ! - Danny Jean-Yves Avenard wrote: Hi Last month, people reported a crash with Asterisk 1.2.13 and spandsp-0.0.3 when receiving a fax using fax detection. Today I've tried 1.2.14 with the latest spandsp 0.0.3pre27 and with the snapshots for app_rxfax.c and app_txfax.c. The problem still happens. Has anyone found how to resolve this issue? I tried emailing Steve Underwood (with crash backtrace) but he hasn't answered... Otherwise, have you found spandsp 0.0.3 to provide better fax reception quality than 0.0.2? While I've had no problem with 0.0.2 locally, it usually fails when we receive faxes from overseas :( Thanks Regards Jean-Yves ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13
Hi On 12/18/06, Danny [EMAIL PROTECTED] wrote: I am using CentOS 4.4 [ asterisk-1.2.12.1 ] I too had problems with RxFax application. I tried spandsp-0.0.2pre26 spandsp-0.0.3pre23 .0.2 could install, but it crashed .0.3 doesnt install I never had any problems installing spandsp 0.0.2 with any of the version of Asterisk, and this for a few years and without a crash ever. The reason I'm looking at spandsp0.0.3 is that it's supposed to support T38 and I was also hoping it would work better with fax coming from overseas... JY ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13
On Mon, Dec 18, 2006 at 07:17:56PM +1100, Jean-Yves Avenard wrote: Hi Last month, people reported a crash with Asterisk 1.2.13 and spandsp-0.0.3 when receiving a fax using fax detection. Today I've tried 1.2.14 with the latest spandsp 0.0.3pre27 and with the snapshots for app_rxfax.c and app_txfax.c. The problem still happens. Can you provide a backtrace of the crash? Just saying it crashed doesn't really help. Also: what libraries are involved? ldd /usr/lib/asterisk/modules/app_rxfax.so and report what is the version and package of each library mentioned there. Any more automated way of doing this? -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13
Hi On 12/18/06, Tzafrir Cohen [EMAIL PROTECTED] wrote: Can you provide a backtrace of the crash? Sure. I've attached a backtrace for both 1.2.13 and 1.2.14 running the same version of spandsp and all other libraries. This is on a Fedora Core 6 machine (I can not attach the message as it makes the message over 40kB) http://www.avenard.org/asterisk/trace1-2-13.txt http://www.avenard.org/asterisk/trace1-2-14.txt Just saying it crashed doesn't really help. Well, the full backtrace was reported here last month, I was just pointing out that it was still happening with 1.2.14. Also: what libraries are involved? ldd /usr/lib/asterisk/modules/app_rxfax.so linked with spandsp 0.0.2 I get: linux-gate.so.1 = (0x00c6c000) libspandsp.so.0 = /usr/lib/libspandsp.so.0 (0x0071) libtiff.so.3 = /usr/lib/libtiff.so.3 (0x006b4000) libc.so.6 = /lib/libc.so.6 (0x001e7000) libm.so.6 = /lib/libm.so.6 (0x00e43000) libjpeg.so.62 = /usr/lib/libjpeg.so.62 (0x009c5000) libz.so.1 = /usr/lib/libz.so.1 (0x00d9e000) /lib/ld-linux.so.2 (0x00534000) I unfortunately can't try with spandsp 0.0.3 right now as I need a working asterisk ... linux-gate: spandsp: 0.0.3pre27 libtiff: 3.8.2 glibc: 2.5-3 libjpeg: 6b-37 and report what is the version and package of each library mentioned there. Any more automated way of doing this? This is standard Fedora Core 6. You can find last month, on this distribution list For the archive: http://lists.digium.com/pipermail/asterisk-users/2006-November/172652.html People mentioned this issue as well as where it was crashing. Hope that helps. Jean-Yves ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13 [ Virusgeprüft]
a few weeks ago I encountered the same problem. I found out that asterisk is crashing when app_rxfax.so is calling line 327 of app_rxfax.c 'ast_frfree(int);' out of the testing tree running with actual spandsp-0.0.3 commenting this line out it doesn't crash *, but that's no solution it do work with asterisk-1.2.9 but not with 1.2.13 - not tested 1.2.14 yet [EMAIL PROTECTED] schrieb am 18.12.2006 12:32:12: Hi On 12/18/06, Tzafrir Cohen [EMAIL PROTECTED] wrote: Can you provide a backtrace of the crash? Sure. I've attached a backtrace for both 1.2.13 and 1.2.14 running the same version of spandsp and all other libraries. This is on a Fedora Core 6 machine (I can not attach the message as it makes the message over 40kB) http://www.avenard.org/asterisk/trace1-2-13.txt http://www.avenard.org/asterisk/trace1-2-14.txt Just saying it crashed doesn't really help. Well, the full backtrace was reported here last month, I was just pointing out that it was still happening with 1.2.14. Also: what libraries are involved? ldd /usr/lib/asterisk/modules/app_rxfax.so linked with spandsp 0.0.2 I get: linux-gate.so.1 = (0x00c6c000) libspandsp.so.0 = /usr/lib/libspandsp.so.0 (0x0071) libtiff.so.3 = /usr/lib/libtiff.so.3 (0x006b4000) libc.so.6 = /lib/libc.so.6 (0x001e7000) libm.so.6 = /lib/libm.so.6 (0x00e43000) libjpeg.so.62 = /usr/lib/libjpeg.so.62 (0x009c5000) libz.so.1 = /usr/lib/libz.so.1 (0x00d9e000) /lib/ld-linux.so.2 (0x00534000) I unfortunately can't try with spandsp 0.0.3 right now as I need a working asterisk ... linux-gate: spandsp: 0.0.3pre27 libtiff: 3.8.2 glibc: 2.5-3 libjpeg: 6b-37 and report what is the version and package of each library mentioned there. Any more automated way of doing this? This is standard Fedora Core 6. You can find last month, on this distribution list For the archive: http://lists.digium.com/pipermail/asterisk-users/2006-November/172652.html People mentioned this issue as well as where it was crashing. Hope that helps. Jean-Yves ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Diese E-Mail und alle Anhänge enthalten vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese E-Mail und ihren Inhalt. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser E-Mail ist nicht gestattet. This e-mail and any attached files may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail by mistake) please notify the sender immediately and delete this e-mail. Any unauthorised duplication, disclosure or distribution of this e-mail and content is strictly forbidden. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13
A little progress on this problem Examining the logs i found a weird looking 'soft hangup' which reminded me on an earlier issue we had. (and the reason why we were still on the 'i' release of bristuff). It looked as if the channel hung up just before rxfax actually could begin to work. Normally we would let the faxdetection be automatic and let ast jump to the 'fax' extension, which in turn calls the faxreceive macro as described in my original post. Bypassing all that and directly tie-ing an extension to the faxreceive macro (not even answering the channel), gives a successful fax reception. RxFax has a check whether the channel is answered, and it will answer it, if not already. I think this was a lucky shot in the dark though. The problem seems to be a mismatch between the state of the channel (answered) and what it actually is. Getting data from the channel wont work then i guess. This is a suitable workaround for our little setup for now. The only thing we miss at this point is that we wont be able to receive faxes at every extension anymore, just the one. I do not have enough knowledge of the sources to suggest a fix for this. It looks like either the specific stuff for our card (quadbri) or asterisk itself would be the area to look into, but again, i am not (yet) capable of doing so myself. Hope this helps anyone fixing the real problem. marcel On 16 nov 2006, at 11:27, Marcel van der Boom wrote: Hi, I'm using spandsp-0.0.3 [http://www.soft-switch.org/downloads/snapshots/spandsp/ spandsp-20061116.tar.gz] on a bristuffed asterisk (1.2.13) [http://212.91.251.199/~junghanns.net/downloads/bristuff-0.3.0- PRE-1v.tar.gz] libtiff is at version 3.6.0 Running on: Linux router2 2.6.17-2-686 #1 SMP Wed Sep 13 16:34:10 UTC 2006 i686 GNU/Linux Debian testing distro. I've tried many combinations of bristuffed ast and spandsp versions, but all fail at the same point. The last combination i got to work was bristuffed 0.3.0-PRE-1i with spandsp-0.0.2-pre25 (on an earlier kernel) The app_rxfax.c in use is from: [http://www.soft-switch.org/downloads/snapshots/spandsp/test-apps- asterisk-1.2/app_rxfax.c] On reception of a fax through RxFax, i get the exception. The relevant part of the dialplan is [macro-faxreceive] ; Receive a fax exten = s,1,Set(FAXFILE=${FAXSPOOL}/${UNIQUEID}.tif) ; Save the fax in a tif file exten = s,2,RxFAX(${FAXFILE}) ; Receive it exten = s,3,NoOp(Fax reception complete) ; exten = s,4,Hangup Running asterisk (with the above versions) through gdb and doing a backtrace gives me: #0 0xa7d45947 in raise () from /lib/tls/libc.so.6 #1 0xa7d470c9 in abort () from /lib/tls/libc.so.6 #2 0xa7d7afda in __fsetlocking () from /lib/tls/libc.so.6 #3 0xa7d8289f in mallopt () from /lib/tls/libc.so .6 #4 0xa7d82942 in free () from /lib/tls/libc.so.6 #5 0xa75efd68 in rxfax_exec (chan=0x818c5f8, data=0xa74a4798) at app_rxfax.c:327 #6 0x08090088 in pbx_extension_helper (c=0x818c5f8, con=value optimized out, context=value optimized out, exten=0x818c83c s, priority=2, label=0x0, callerid=0x0, action=1) at pbx.c:554 #7 0xa762cb05 in macro_exec (chan=0x818c5f8, data=0xa74aafe8) at app_macro.c:221 #8 0x08090088 in pbx_extension_helper (c=0x818c5f8, con=value optimized out, context=value optimized out, exten=0x818c83c s, priority=1, label=0x0, callerid=0x0, action=1) at pbx.c:554 #9 0x08091dee in __ast_pbx_run (c=0x818c5f8) at pbx.c:2231 #10 0x08092a1c in pbx_thread (data=0x818c5f8) at pbx.c:2518 #11 0xa7f0d0bd in start_thread () from /lib/tls/libpthread.so.0 #12 0xa7de892e in clone () from /lib/tls/libc.so.6 This seems to indicate that the ast_frfree(inf); at line 327 of app_rxfax.c causes the problem chain? I'm a bit lost on how to debug this further. Is this actually a spandsp problem or is another package the cause? Any tips? marcel -- Marcel van der Boom HS-Development BV -- http://www.hsdev.com So! webapplicatie framework -- http://make-it-so.info ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Marcel van der Boom HS-Development BV -- http://www.hsdev.com So! webapplicatie framework -- http://make-it-so.info ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13
Hi, I'm using spandsp-0.0.3 [http://www.soft-switch.org/downloads/snapshots/spandsp/ spandsp-20061116.tar.gz] on a bristuffed asterisk (1.2.13) [http://212.91.251.199/~junghanns.net/downloads/bristuff-0.3.0- PRE-1v.tar.gz] libtiff is at version 3.6.0 Running on: Linux router2 2.6.17-2-686 #1 SMP Wed Sep 13 16:34:10 UTC 2006 i686 GNU/Linux Debian testing distro. I've tried many combinations of bristuffed ast and spandsp versions, but all fail at the same point. The last combination i got to work was bristuffed 0.3.0-PRE-1i with spandsp-0.0.2-pre25 (on an earlier kernel) The app_rxfax.c in use is from: [http://www.soft-switch.org/downloads/snapshots/spandsp/test-apps- asterisk-1.2/app_rxfax.c] On reception of a fax through RxFax, i get the exception. The relevant part of the dialplan is [macro-faxreceive] ; Receive a fax exten = s,1,Set(FAXFILE=${FAXSPOOL}/${UNIQUEID}.tif) ; Save the fax in a tif file exten = s,2,RxFAX(${FAXFILE}) ; Receive it exten = s,3,NoOp(Fax reception complete) ; exten = s,4,Hangup Running asterisk (with the above versions) through gdb and doing a backtrace gives me: #0 0xa7d45947 in raise () from /lib/tls/libc.so.6 #1 0xa7d470c9 in abort () from /lib/tls/libc.so.6 #2 0xa7d7afda in __fsetlocking () from /lib/tls/libc.so.6 #3 0xa7d8289f in mallopt () from /lib/tls/libc.so .6 #4 0xa7d82942 in free () from /lib/tls/libc.so.6 #5 0xa75efd68 in rxfax_exec (chan=0x818c5f8, data=0xa74a4798) at app_rxfax.c:327 #6 0x08090088 in pbx_extension_helper (c=0x818c5f8, con=value optimized out, context=value optimized out, exten=0x818c83c s, priority=2, label=0x0, callerid=0x0, action=1) at pbx.c:554 #7 0xa762cb05 in macro_exec (chan=0x818c5f8, data=0xa74aafe8) at app_macro.c:221 #8 0x08090088 in pbx_extension_helper (c=0x818c5f8, con=value optimized out, context=value optimized out, exten=0x818c83c s, priority=1, label=0x0, callerid=0x0, action=1) at pbx.c:554 #9 0x08091dee in __ast_pbx_run (c=0x818c5f8) at pbx.c:2231 #10 0x08092a1c in pbx_thread (data=0x818c5f8) at pbx.c:2518 #11 0xa7f0d0bd in start_thread () from /lib/tls/libpthread.so.0 #12 0xa7de892e in clone () from /lib/tls/libc.so.6 This seems to indicate that the ast_frfree(inf); at line 327 of app_rxfax.c causes the problem chain? I'm a bit lost on how to debug this further. Is this actually a spandsp problem or is another package the cause? Any tips? marcel -- Marcel van der Boom HS-Development BV -- http://www.hsdev.com So! webapplicatie framework -- http://make-it-so.info smime.p7s Description: S/MIME cryptographic signature ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13
please check if the old spandsp-version is kompletly removed do you use the rxfax/txfax version out of the soft-switch/snapshots-folder ??? if not - try them [EMAIL PROTECTED] wrote on 16.11.2006 11:27:36 AM: Hi, I'm using spandsp-0.0.3 [http://www.soft-switch.org/downloads/snapshots/spandsp/ spandsp-20061116.tar.gz] on a bristuffed asterisk (1.2.13) [http://212.91.251.199/~junghanns.net/downloads/bristuff-0.3.0- PRE-1v.tar.gz] libtiff is at version 3.6.0 Running on: Linux router2 2.6.17-2-686 #1 SMP Wed Sep 13 16:34:10 UTC 2006 i686 GNU/Linux Debian testing distro. I've tried many combinations of bristuffed ast and spandsp versions, but all fail at the same point. The last combination i got to work was bristuffed 0.3.0-PRE-1i with spandsp-0.0.2-pre25 (on an earlier kernel) The app_rxfax.c in use is from: [http://www.soft-switch.org/downloads/snapshots/spandsp/test-apps- asterisk-1.2/app_rxfax.c] On reception of a fax through RxFax, i get the exception. The relevant part of the dialplan is [macro-faxreceive] ; Receive a fax exten = s,1,Set(FAXFILE=${FAXSPOOL}/${UNIQUEID}.tif) ; Save the fax in a tif file exten = s,2,RxFAX(${FAXFILE}) ; Receive it exten = s,3,NoOp(Fax reception complete) ; exten = s,4,Hangup Running asterisk (with the above versions) through gdb and doing a backtrace gives me: #0 0xa7d45947 in raise () from /lib/tls/libc.so.6 #1 0xa7d470c9 in abort () from /lib/tls/libc.so.6 #2 0xa7d7afda in __fsetlocking () from /lib/tls/libc.so.6 #3 0xa7d8289f in mallopt () from /lib/tls/libc.so .6 #4 0xa7d82942 in free () from /lib/tls/libc.so.6 #5 0xa75efd68 in rxfax_exec (chan=0x818c5f8, data=0xa74a4798) at app_rxfax.c:327 #6 0x08090088 in pbx_extension_helper (c=0x818c5f8, con=value optimized out, context=value optimized out, exten=0x818c83c s, priority=2, label=0x0, callerid=0x0, action=1) at pbx.c:554 #7 0xa762cb05 in macro_exec (chan=0x818c5f8, data=0xa74aafe8) at app_macro.c:221 #8 0x08090088 in pbx_extension_helper (c=0x818c5f8, con=value optimized out, context=value optimized out, exten=0x818c83c s, priority=1, label=0x0, callerid=0x0, action=1) at pbx.c:554 #9 0x08091dee in __ast_pbx_run (c=0x818c5f8) at pbx.c:2231 #10 0x08092a1c in pbx_thread (data=0x818c5f8) at pbx.c:2518 #11 0xa7f0d0bd in start_thread () from /lib/tls/libpthread.so.0 #12 0xa7de892e in clone () from /lib/tls/libc.so.6 This seems to indicate that the ast_frfree(inf); at line 327 of app_rxfax.c causes the problem chain? I'm a bit lost on how to debug this further. Is this actually a spandsp problem or is another package the cause? Any tips? marcel -- Marcel van der Boom HS-Development BV -- http://www.hsdev.com So! webapplicatie framework -- http://make-it-so.info [attachment smime.p7s deleted by Dirk Rieger/B-W] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Diese E-Mail und alle Anhänge enthalten vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese E-Mail und ihren Inhalt. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser E-Mail ist nicht gestattet. This e-mail and any attached files may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail by mistake) please notify the sender immediately and delete this e-mail. Any unauthorised duplication, disclosure or distribution of this e-mail and content is strictly forbidden. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13
On 16 nov 2006, at 12:12, [EMAIL PROTECTED] wrote: please check if the old spandsp-version is kompletly removed It is. do you use the rxfax/txfax version out of the soft-switch/snapshots- folder ??? if not - try them From my original msg: The app_rxfax.c in use is from: [http://www.soft-switch.org/downloads/snapshots/spandsp/test-apps- asterisk-1.2/app_rxfax.c] This is the folder you mean, right? marcel -- Marcel van der Boom HS-Development BV -- http://www.hsdev.com So! webapplicatie framework -- http://make-it-so.info smime.p7s Description: S/MIME cryptographic signature ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] spandsp 0.0.3 RxFax fax reception crashes bristuffed asterisk 1.2.13
On 16 nov 2006, at 12:12, [EMAIL PROTECTED] wrote: please check if the old spandsp-version is kompletly removed It is. do you use the rxfax/txfax version out of the soft-switch/snapshots- folder ??? if not - try them From my original msg: The app_rxfax.c in use is from: [http://www.soft-switch.org/downloads/snapshots/spandsp/test-apps- asterisk-1.2/app_rxfax.c] This is the folder you mean, right? Yep Diese E-Mail und alle Anhänge enthalten vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese E-Mail und ihren Inhalt. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser E-Mail ist nicht gestattet. This e-mail and any attached files may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail by mistake) please notify the sender immediately and delete this e-mail. Any unauthorised duplication, disclosure or distribution of this e-mail and content is strictly forbidden. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users