AW: [Asterisk-Users] Voice in Asterisk with BRI ISDN Any properworking configurations yet?
Hello Tim I'm struggling to get a HFC card running in NT mode. It seems to work for a short period but then stops. The messages on the asterisk console mentione something about event 6. Is the zaphfc module enough to be loaded or must hisax also be loaded in order to work? Best regards, Pascal. _ Von: Robinson Tim-W10277 [mailto:[EMAIL PROTECTED] Gesendet: Donnerstag, 18. November 2004 15:00 An: Asterisk Users Mailing List - Non-Commercial Discussion Betreff: RE: [Asterisk-Users] Voice in Asterisk with BRI ISDN Any properworking configurations yet? I have 3 HFC cards running in my PC in both NT and TE mode. Works well.. What problems are you having, what have you tried? Rgds Tim -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Christiaan Brink Sent: 18 November 2004 13:40 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [Asterisk-Users] Voice in Asterisk with BRI ISDN Any proper working configurations yet? Hi all If been working a while now trying to interface Asterisks with BRI ISDN. I've tried various drivers without any success. I'm running a HFC passive ISDN board in 2.6.5 kernel. Is there anybody out there who have successfully interface voice with Asterisk using BRI ISDN from their public operator? If so, can you please supply me with details regarding the type of card used, manufacturer, etc. Also can you please provide me with details regarding the drivers used and so forth. Kind Regards, Christiaan Brink ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: AW: [Asterisk-Users] Voice in Asterisk with BRI ISDN Any properworking configurations yet?
On Thu, 2004-11-18 at 14:35, Pascal C. Kocher wrote: Hello Tim I'm struggling to get a HFC card running in NT mode. It seems to work for a short period but then stops. The messages on the asterisk console mentione something about event 6. Is the zaphfc module enough to be loaded or must hisax also be loaded in order to work? zaphfc works fine in NT mode, no problems here (Ackermann Euracom P4 and Teles.FON). Don't load the HiSax driver and zaphfc, that would not work. If you have another card (like Teles, Winbond etc.) that you need the HiSax driver for, leave the support for the hfc based cards out during the kernel-compile. You don't need it, when using zaphfc. The reason, why it stops (like no dialtone anymore) is when you run ztcfg more than once, after the machine has booted. That'll kill zaphfc and is a known bug. Slán leat, Martin List-Petersen Dublin, Eire (contact info on -- http://www.marlow.dk/) ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
