RE: [Asterisk-Users] Cant get Asterisk server talk with IAX

2004-12-28 Thread David J Carter 
Hi,

Have you got port 4569 open in your NAT/Firewall?

I take it that your extension ranges on the servers are 5000 and 6000 range.

The configs look OK, same as mine, and mine works fine.

Regards

Dave

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Chicku
Sent: 28 December 2004 04:44
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Cant get Asterisk server talk with IAX




Hi everyone,

I am trying to connect 2 asterisk servers via IAX, but it just
fails to do so.. I'm using SIP to connect the IP phones on the
LAN at the 2 different physical locations where each server
resides and I'm able to communicate on my LAN via SIP without
any issues. The problem is that I'm unable to make Asterisk
servers talk with each other via IAX..

Here is my issue.

I've got one asterisk server connected directly to the internet
and the other behind a NAT.


The iax.conf file for the one that is directly connected to the
internet is as follows:

[general]
bindport = 4569   ; Port to bind to (IAX is 4569)
bindaddr = 0.0.0.0; Address to bind to (all addresses on
machine)
delayreject=yes
disallow=all
allow=ulaw
allow=alaw
allow=gsm
jitterbuffer=yes
mailboxdetail=yes


#include iax_additional.conf [I'm using AMP as the GUI
interface]


register = 1000:[EMAIL PROTECTED]

[a.b.c.d is the IP address of the router. ie. the server is
behind the nat]


[2000]
type=user
username=2000
auth=plaintext
permit=a.b.c.d/255.255.255.0
host=dynamic
context=fullaccess

My extension.conf is as follows for the server that is directly
connected to internet.:

[fullaccess]
exten = _5XXX,1,Dial(IAX2/[EMAIL PROTECTED]/${EXTEN})
exten = _5XXX,2,Hangup
exten = _5XXX,102,Hangup
--

Now the iax.conf file for the one behind NAT is as follows:


[general]
bindport = 4569   ; Port to bind to (IAX is 4569)
bindaddr = 0.0.0.0; Address to bind to (all addresses on
machine)
delayreject=yes
disallow=all
allow=ulaw
allow=alaw
allow=gsm
jitterbuffer=yes
mailboxdetail=yes


#include iax_additional.conf


register = 2000:[EMAIL PROTECTED]


[1000]
type=user
username=1000
auth=plaintext
permit=0.0.0.0/0.0.0.0
host=dynamic
context=fullaccess

My extension.conf is as follows for the server that is behind
NAT:

[fullaccess]
exten = _6XXX,1,Dial(IAX2/[EMAIL PROTECTED]/${EXTEN})
exten = _6XXX,2,Hangup
exten = _6XXX,102,Hangup
-
Free POP3 Email from www.Gawab.com
Sign up NOW and get your account @gawab.com!!
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

RE: [Asterisk-Users] Cant get Asterisk server talk with IAX

2004-12-28 Thread Sojesh 

Hi Dave,

Thank you for your quick response.

I'm using Netgear 54Mbps Wireless Router WGR614v3 and I have forwarded
the ports as follows : 
   
  
 #
Service Name
 Start Port
  End Port
 Server IP
  Address
  
 1
  Asterisk
4569
4569
192.168.0.2
When I try to connect from the server that is connected directly to the
internet to the one behind NAt, I get the following in my logs in my
server that is connected directly to the internet.


Dec 28 03:24:31 DEBUG[19846]: 0.0.0.0/0.0.0.0/0.0.0.0 appended to acl
for peer
Dec 28 03:24:31 DEBUG[19846]: 127.0.0.1/255.255.255.0/255.255.255.0
appended to acl for peer
Dec 28 03:24:31 DEBUG[19846]: # Testing 127.0.0.1 with 0.0.0.0
Dec 28 03:24:31 DEBUG[19846]: # Testing 127.0.0.1 with 127.0.0.0
Dec 28 03:24:31 VERBOSE[19846]:   == Manager 'admin' logged on from
127.0.0.1
Dec 28 03:24:31 DEBUG[19846]: Raw Hangup a.b.c.d:4569, src=0, dst=1
Dec 28 03:24:31 DEBUG[19846]: Raw Hangup a.b.c.d:4569, src=0, dst=1
Dec 28 03:24:41 DEBUG[19846]: Manager received command 'Command'
Dec 28 03:24:51 DEBUG[19846]: Manager received command 'Command'
Dec 28 03:25:01 DEBUG[19846]: Manager received command 'Command'
Dec 28 03:25:01 NOTICE[19846]: No registration for peer '2000' (from
203.109.116.99)
Dec 28 03:25:11 DEBUG[19846]: Manager received command 'Command'
Dec 28 03:25:16 NOTICE[19846]: Registration of '1000' rejected:
Registration Refused
Dec 28 03:25:21 DEBUG[19846]: Manager received command 'Command'



The logs on the server that is behind the NAT is as follows:


Dec 28 16:53:34 NOTICE[25845]: No registration for peer '1000' (from
66.151.89.145)
Dec 28 16:53:37 DEBUG[25845]: Manager received command 'Command'
Dec 28 16:53:47 DEBUG[25845]: Manager received command 'Command'
Dec 28 16:53:52 DEBUG[25845]: # Testing 66.151.89.145 with 0.0.0.0
Dec 28 16:53:52 NOTICE[25845]: Rejected connect attempt from
66.151.89.145, request '[EMAIL PROTECTED]' does not exist
Dec 28 16:53:57 DEBUG[25845]: Manager received command 'Command'
Dec 28 16:54:02 NOTICE[25845]: Registration of '2000' rejected:
Registration Refused
Dec 28 16:54:07 DEBUG[25845]: Manager received command 'Command'
Dec 28 16:54:17 DEBUG[25845]: Manager received command 'Command'
Dec 28 16:54:24 NOTICE[25845]: No registration for peer '1000' (from
66.151.89.145)

The problem is getting the 2 servers to register.. Can you please let me
know what could be the reason? Is it the problem with the register
line in both the server which is mentioned as host-dynamic?

Thanks,
Soj


On Tue, 2004-12-28 at 16:40, David J Carter wrote:
 Hi,
 
 Have you got port 4569 open in your NAT/Firewall?
 
 I take it that your extension ranges on the servers are 5000 and 6000 range.
 
 The configs look OK, same as mine, and mine works fine.
 
 Regards
 
 Dave
 
 -Original Message-
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED] Behalf Of Chicku
 Sent: 28 December 2004 04:44
 To: asterisk-users@lists.digium.com
 Subject: [Asterisk-Users] Cant get Asterisk server talk with IAX
 
 
 
 
 Hi everyone,
 
 I am trying to connect 2 asterisk servers via IAX, but it just
 fails to do so.. I'm using SIP to connect the IP phones on the
 LAN at the 2 different physical locations where each server
 resides and I'm able to communicate on my LAN via SIP without
 any issues. The problem is that I'm unable to make Asterisk
 servers talk with each other via IAX..
 
 Here is my issue.
 
 I've got one asterisk server connected directly to the internet
 and the other behind a NAT.
 
 
 The iax.conf file for the one that is directly connected to the
 internet is as follows:
 
 [general]
 bindport = 4569   ; Port to bind to (IAX is 4569)
 bindaddr = 0.0.0.0; Address to bind to (all addresses on
 machine)
 delayreject=yes
 disallow=all
 allow=ulaw
 allow=alaw
 allow=gsm
 jitterbuffer=yes
 mailboxdetail=yes
 
 
 #include iax_additional.conf [I'm using AMP as the GUI
 interface]
 
 
 register = 1000:[EMAIL PROTECTED]
 
 [a.b.c.d is the IP address of the router. ie. the server is
 behind the nat]
 
 
 [2000]
 type=user
 username=2000
 auth=plaintext
 permit=a.b.c.d/255.255.255.0
 host=dynamic
 context=fullaccess
 
 My extension.conf is as follows for the server that is directly
 connected to internet.:
 
 [fullaccess]
 exten = _5XXX,1,Dial(IAX2/[EMAIL PROTECTED]/${EXTEN})
 exten = _5XXX,2,Hangup
 exten = _5XXX,102,Hangup
 --
 
 Now the iax.conf file for the one behind NAT is as follows:
 
 
 [general]
 bindport = 4569   ; Port to bind to (IAX is 4569)
 bindaddr = 0.0.0.0; Address to bind to (all addresses on
 machine)
 delayreject=yes
 disallow=all
 allow=ulaw
 allow=alaw
 allow=gsm
 jitterbuffer=yes
 mailboxdetail=yes
 
 
 #include iax_additional.conf
 
 
 register = 2000:[EMAIL PROTECTED]
 
 
 [1000]
 type=user
 username=1000
 auth=plaintext
 permit=0.0.0.0/0.0.0.0
 host=dynamic
 context=fullaccess
 
 My extension.conf is as follows for the server that is behind
 NAT:
 
 [fullaccess]

RE: [Asterisk-Users] Cant get Asterisk server talk with IAX

2004-12-28 Thread Sojesh 
Hi Dave,

Thank you for the sample config file for IAX... But, that didnt help
me.. Also, I have the entries for 5001 in sip.conf. But, I'm not sure if
it is correct.. So, can you please show me yor sample sip and iax files.

Really appreciate your help.

Thank you,
Soj

On Tue, 2004-12-28 at 17:22, David J Carter wrote:
 Sojesh,
 
 My IAX configs look like below: -
 
 ;Server A
 
 register=wilma:[EMAIL PROTECTED]
 
 [fred]
 type=yes
 deny=0.0.0.0/0.0.0.0
 permit=serverb_address/255.255.255.255
 secret=wilma
 
 
 ;Server B
 
 register=fred:[EMAIL PROTECTED]
 
 [wilma]
 type=user
 deny=0.0.0.0/0.0.0.0
 permit=servera_address/255.255.255.255
 secret=fred
 
 make sure you have the entries in your sip.conf for the extensions as part
 of the debug output looks like 5001 does not exist.
 
 Dave
 
 -Original Message-
 From: Sojesh [mailto:[EMAIL PROTECTED]
 Sent: 28 December 2004 11:37
 To: [EMAIL PROTECTED]; asterisk-users@lists.digium.com
 Subject: RE: [Asterisk-Users] Cant get Asterisk server talk with IAX
 
 
 
 Hi Dave,
 
 Thank you for your quick response.
 
 I'm using Netgear 54Mbps Wireless Router WGR614v3 and I have forwarded
 the ports as follows :
 
 
  #
 Service Name
  Start Port
   End Port
  Server IP
   Address
 
  1
   Asterisk
 4569
 4569
 192.168.0.2
 When I try to connect from the server that is connected directly to the
 internet to the one behind NAt, I get the following in my logs in my
 server that is connected directly to the internet.
 
 
 Dec 28 03:24:31 DEBUG[19846]: 0.0.0.0/0.0.0.0/0.0.0.0 appended to acl
 for peer
 Dec 28 03:24:31 DEBUG[19846]: 127.0.0.1/255.255.255.0/255.255.255.0
 appended to acl for peer
 Dec 28 03:24:31 DEBUG[19846]: # Testing 127.0.0.1 with 0.0.0.0
 Dec 28 03:24:31 DEBUG[19846]: # Testing 127.0.0.1 with 127.0.0.0
 Dec 28 03:24:31 VERBOSE[19846]:   == Manager 'admin' logged on from
 127.0.0.1
 Dec 28 03:24:31 DEBUG[19846]: Raw Hangup a.b.c.d:4569, src=0, dst=1
 Dec 28 03:24:31 DEBUG[19846]: Raw Hangup a.b.c.d:4569, src=0, dst=1
 Dec 28 03:24:41 DEBUG[19846]: Manager received command 'Command'
 Dec 28 03:24:51 DEBUG[19846]: Manager received command 'Command'
 Dec 28 03:25:01 DEBUG[19846]: Manager received command 'Command'
 Dec 28 03:25:01 NOTICE[19846]: No registration for peer '2000' (from
 203.109.116.99)
 Dec 28 03:25:11 DEBUG[19846]: Manager received command 'Command'
 Dec 28 03:25:16 NOTICE[19846]: Registration of '1000' rejected:
 Registration Refused
 Dec 28 03:25:21 DEBUG[19846]: Manager received command 'Command'
 
 
 
 The logs on the server that is behind the NAT is as follows:
 
 
 Dec 28 16:53:34 NOTICE[25845]: No registration for peer '1000' (from
 66.151.89.145)
 Dec 28 16:53:37 DEBUG[25845]: Manager received command 'Command'
 Dec 28 16:53:47 DEBUG[25845]: Manager received command 'Command'
 Dec 28 16:53:52 DEBUG[25845]: # Testing 66.151.89.145 with 0.0.0.0
 Dec 28 16:53:52 NOTICE[25845]: Rejected connect attempt from
 66.151.89.145, request '[EMAIL PROTECTED]' does not exist
 Dec 28 16:53:57 DEBUG[25845]: Manager received command 'Command'
 Dec 28 16:54:02 NOTICE[25845]: Registration of '2000' rejected:
 Registration Refused
 Dec 28 16:54:07 DEBUG[25845]: Manager received command 'Command'
 Dec 28 16:54:17 DEBUG[25845]: Manager received command 'Command'
 Dec 28 16:54:24 NOTICE[25845]: No registration for peer '1000' (from
 66.151.89.145)
 
 The problem is getting the 2 servers to register.. Can you please let me
 know what could be the reason? Is it the problem with the register
 line in both the server which is mentioned as host-dynamic?
 
 Thanks,
 Soj
 
 
 On Tue, 2004-12-28 at 16:40, David J Carter wrote:
  Hi,
 
  Have you got port 4569 open in your NAT/Firewall?
 
  I take it that your extension ranges on the servers are 5000 and 6000
 range.
 
  The configs look OK, same as mine, and mine works fine.
 
  Regards
 
  Dave
 
  -Original Message-
  From: [EMAIL PROTECTED]
  [mailto:[EMAIL PROTECTED] Behalf Of Chicku
  Sent: 28 December 2004 04:44
  To: asterisk-users@lists.digium.com
  Subject: [Asterisk-Users] Cant get Asterisk server talk with IAX
 
 
 
 
  Hi everyone,
 
  I am trying to connect 2 asterisk servers via IAX, but it just
  fails to do so.. I'm using SIP to connect the IP phones on the
  LAN at the 2 different physical locations where each server
  resides and I'm able to communicate on my LAN via SIP without
  any issues. The problem is that I'm unable to make Asterisk
  servers talk with each other via IAX..
 
  Here is my issue.
 
  I've got one asterisk server connected directly to the internet
  and the other behind a NAT.
 
  
  The iax.conf file for the one that is directly connected to the
  internet is as follows:
 
  [general]
  bindport = 4569   ; Port to bind to (IAX is 4569)
  bindaddr = 0.0.0.0; Address to bind to (all addresses on
  machine)
  delayreject=yes
  disallow=all
  allow=ulaw
  allow=alaw
  allow=gsm
  jitterbuffer=yes
  mailboxdetail=yes