Hi Aaron,
I tried the progressinband=no and it worked great. Thanks for the
tip.
Humberto
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Humberto Aicardi
Sent: 01 November 2005 17:17
To: Asterisk-Users@lists.digium.com
Subject: [Asterisk-Users] PAP2 and ringing issues
Hi,
I currently have several PAP2-NA units configured to an Asterisk
box, everything works fine except from the fact that after dialing a
number I can hear ringing tones. When I connect to the same
Asterisk box
using XLite or EyeBeam I hear only one, any ideas on what may
be wrong
on the PAP units?
Hi Humberto,
We had this problem with calls being sent to a PRI. The two ringtones were
due to both an RTP audio stream being generated from the PRI (this is the
one we wanted) and also a SIP 180 ringing response being sent by the same
Asterisk server. I'm not sure why both are getting sent, in 1.0.7 I'm pretty
sure they weren't. The fix was simply to set progressinband=no in sip.conf
on the Asterisk server with the PRI.
The reason you only get the doble ring on one UA and not others seems to be
entirely down to the UA. In our case the Linksys units act passed on both
ringing indications where as Cisco IP Phones disregarded the SIP 180 and
just passed on the RTP.
Hth.
Aaron
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users