Re: [Asterisk-Users] Problem with ZAPHFC: internal S0 hangs when hanging up
Am Dienstag, 7. Februar 2006 12:55 schrieb Francesco Peeters (Asterisk): > On Tue, February 7, 2006 9:53, Sven Fischer said: > > Am Dienstag, 7. Februar 2006 09:38 schrieb Sven Fischer: > >> Hello all, > >> > >> if I try to call from one phone on the internal S0 to another on the > >> same > >> S0 using zaphfc, the bus is hung up. The called phone is ringing, but I > >> can't talk from one phone to the other. The error I get is: > >> > >> -- Executing Dial("Zap/2-1", "ZAP/1/55|15|tr") in new stack > >> -- Requested transfer capability: 0x00 - SPEECH > >> -- Called 1/55 > >> -- Channel 0/1, span 1 got hangup, cause 42 > >> -- Zap/1-1 is circuit-busy > >> -- Hungup 'Zap/1-1' > >> > >> The called phone is still ringing, if I have hung up the calling phone. > >> I > >> have to restart asterisk to get things going again. Calling from SIP to > >> the > >> phones and calling from phones to external ISDN is working fine. > > > > Okay, further investigations show that if I connect just one phone to the > > NTBA, everything seems to work fine. If I plug in the second phone, the > > communication fails. Each phone works if plugged in on it's own into the > > NTBA. Termination in the NTBA should be activated, the switches are on. > > > > Where should I look for errors? Can it be a termination problem if every > > phone > > works on it's own? > > > > Sven > > Is the card set up for multipoint use? (BRI_NET_PTMP) Yes, it is. But it seems to be a hardware problem, since I can't use both phones in a NTBA connected to the PSTN either... Sven -- Sven Fischer (Dipl.-Phys.) - FACIT Consulting GmbH Hausinger Str. 6 - 40764 Langenfeld Tel: 02173/16700-55 Fax: 02173/16700-60 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem with ZAPHFC: internal S0 hangs when hanging up
On Tue, February 7, 2006 9:53, Sven Fischer said: > Am Dienstag, 7. Februar 2006 09:38 schrieb Sven Fischer: >> Hello all, >> >> if I try to call from one phone on the internal S0 to another on the >> same >> S0 using zaphfc, the bus is hung up. The called phone is ringing, but I >> can't talk from one phone to the other. The error I get is: >> >> -- Executing Dial("Zap/2-1", "ZAP/1/55|15|tr") in new stack >> -- Requested transfer capability: 0x00 - SPEECH >> -- Called 1/55 >> -- Channel 0/1, span 1 got hangup, cause 42 >> -- Zap/1-1 is circuit-busy >> -- Hungup 'Zap/1-1' >> >> The called phone is still ringing, if I have hung up the calling phone. >> I >> have to restart asterisk to get things going again. Calling from SIP to >> the >> phones and calling from phones to external ISDN is working fine. > > Okay, further investigations show that if I connect just one phone to the > NTBA, everything seems to work fine. If I plug in the second phone, the > communication fails. Each phone works if plugged in on it's own into the > NTBA. Termination in the NTBA should be activated, the switches are on. > > Where should I look for errors? Can it be a termination problem if every > phone > works on it's own? > > Sven > Is the card set up for multipoint use? (BRI_NET_PTMP) -- F Peeters PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch 2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0 Cologne HFC-S pins #52, #54, #55 connected in parallel for synching. AMD Duron 1GHz - 1GB - * 1.2.1 2 Sweex HFC-PCI cards ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem with ZAPHFC: internal S0 hangs when hanging up
Am Dienstag, 7. Februar 2006 09:38 schrieb Sven Fischer: > Hello all, > > if I try to call from one phone on the internal S0 to another on the same > S0 using zaphfc, the bus is hung up. The called phone is ringing, but I > can't talk from one phone to the other. The error I get is: > > -- Executing Dial("Zap/2-1", "ZAP/1/55|15|tr") in new stack > -- Requested transfer capability: 0x00 - SPEECH > -- Called 1/55 > -- Channel 0/1, span 1 got hangup, cause 42 > -- Zap/1-1 is circuit-busy > -- Hungup 'Zap/1-1' > > The called phone is still ringing, if I have hung up the calling phone. I > have to restart asterisk to get things going again. Calling from SIP to the > phones and calling from phones to external ISDN is working fine. Okay, further investigations show that if I connect just one phone to the NTBA, everything seems to work fine. If I plug in the second phone, the communication fails. Each phone works if plugged in on it's own into the NTBA. Termination in the NTBA should be activated, the switches are on. Where should I look for errors? Can it be a termination problem if every phone works on it's own? Sven -- Sven Fischer (Dipl.-Phys.) - FACIT Consulting GmbH Hausinger Str. 6 - 40764 Langenfeld Tel: 02173/16700-55 Fax: 02173/16700-60 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] problem with zaphfc
Hi tim, sadly my bios doesn't allow me to change any IRQs. I can only block some - but this would not help. I was running some CPU-frequency-scaling (longhall). I disabled this and my errors are less, almost gone. I think this was my problem! And yes, I'm using asterisk at home (for fun). Thank you anyway. ... Thorsten - Original Message - From: "Robinson Tim-W10277" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, June 28, 2004 2:24 PM Subject: RE: [Asterisk-Users] problem with zaphfc We had the same problems on a couple of Dell Optiplex machines. i.e. slow, jittery audio. After spending several days fiddling around we gave up and bought a Junghanns quadBRI. It just worked without any fuss, and I would suggest that unless this is for a home config where you are cost-constrained, the quadBRI is the best solution. Having said that, I have two zaphfc cards running in my Asterisk pc at home, in NT and TE mode. I am sure the issues we have both seen is some kind or IRQ conflict in the Dells and the config you describe below, but for us it was cheaper to buy a more expensive card that we knew worked. Things to try if you do want to keep fiddling with the hfc cards : 1) Disable IRQ on your graphics card 2) Assign a separate IRQ to each slot on your motherboard (in your BIOS...Dells fall down here as I couldn't do this) Let us know how you get on... RGds Tim R -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of FastJack Sent: 28 June 2004 13:11 To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] problem with zaphfc Hi, I've tried the card (and asterisk-version) with a different computer (athlon t-bird) and there I have no problems. DAMMN!!! What can cause this trouble? The computer is a VIA C3 600 MHz / 256 MB RAM. It has a 90W powersupply, IRQ is not shared. Tried both PCI-Slots (the VIA C3 uses a special RISER-card to make 2 PCI-slot out of one). But I've tried without this riser and the problem is the same. No other devices are attached (only harddisk, ram, the HFC-S). Problem still occurs. with "slow" I mean : distorted, sound as if some frames are to high, others to low. can anyone help me?! PLEASE!!! - Original Message - From: "Michael Sandee" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, June 26, 2004 8:41 PM Subject: Re: [Asterisk-Users] problem with zaphfc > What you describe as slow sound is most likely not a problem with the > driver.. atleast.. very unlikely. Neither with hardware... > > You need proper 100ohm termination on your bus, please check that. > > Slow sound is a very very wierd problem... you can experience clicks, > noise and/or frame (voice) drops under bad conditions (improper > configuration of hardware or software). > > If possible try to issolate the source of the problem, using different > hardware, changing asterisk version or whatever you see fit. > > Regards, > > Michael > > FastJack wrote: > > >the problem not only occures when I use both phones - when I'm using phone 1 > >and annother calls "knocks on" for example - the sound is also not > >ok. > > > >any hints? I'm using a VIA C3 600 MHz with a dual-riser from VIA > >(make 2 PCI-slots out of one). maybe this is the problem ?! > > > >- Original Message - > >From: "FastJack" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Saturday, June 26, 2004 12:52 PM > >Subject: [Asterisk-Users] problem with zaphfc > > > > > > > > > >>hi everybody, > >> > >>I'm running my asterisk with a HFC-S card in NT-mode with a "modded" NTBA > >>(NT1) (=simply crossed cable) and two ISDN-phone behind it. Now, > >>when ever > >> > >> > >I > > > > > >>user both phones at the same time, the sound is very, very crappy, > >>as if > >> > >> > >it > > > > > >>is played at a slower speed (like playing a 7'' single at 33 speed - > >>in those old venyl days). > >> > >>I have not modified my NTBA with a second ohm resistors - can this > >>be the > >>problem? > >> > >>thank you! > >> > >> > >>___ > >>Asterisk-Users mailing list > >>[EMAIL PROTECTED] > >>http://lists.digium.com/mailman/listinfo/asterisk-users > >>To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> > >> > >> > > > > > >___
RE: [Asterisk-Users] problem with zaphfc
We had the same problems on a couple of Dell Optiplex machines. i.e. slow, jittery audio. After spending several days fiddling around we gave up and bought a Junghanns quadBRI. It just worked without any fuss, and I would suggest that unless this is for a home config where you are cost-constrained, the quadBRI is the best solution. Having said that, I have two zaphfc cards running in my Asterisk pc at home, in NT and TE mode. I am sure the issues we have both seen is some kind or IRQ conflict in the Dells and the config you describe below, but for us it was cheaper to buy a more expensive card that we knew worked. Things to try if you do want to keep fiddling with the hfc cards : 1) Disable IRQ on your graphics card 2) Assign a separate IRQ to each slot on your motherboard (in your BIOS...Dells fall down here as I couldn't do this) Let us know how you get on... RGds Tim R -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of FastJack Sent: 28 June 2004 13:11 To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] problem with zaphfc Hi, I've tried the card (and asterisk-version) with a different computer (athlon t-bird) and there I have no problems. DAMMN!!! What can cause this trouble? The computer is a VIA C3 600 MHz / 256 MB RAM. It has a 90W powersupply, IRQ is not shared. Tried both PCI-Slots (the VIA C3 uses a special RISER-card to make 2 PCI-slot out of one). But I've tried without this riser and the problem is the same. No other devices are attached (only harddisk, ram, the HFC-S). Problem still occurs. with "slow" I mean : distorted, sound as if some frames are to high, others to low. can anyone help me?! PLEASE!!! - Original Message - From: "Michael Sandee" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, June 26, 2004 8:41 PM Subject: Re: [Asterisk-Users] problem with zaphfc > What you describe as slow sound is most likely not a problem with the > driver.. atleast.. very unlikely. Neither with hardware... > > You need proper 100ohm termination on your bus, please check that. > > Slow sound is a very very wierd problem... you can experience clicks, > noise and/or frame (voice) drops under bad conditions (improper > configuration of hardware or software). > > If possible try to issolate the source of the problem, using different > hardware, changing asterisk version or whatever you see fit. > > Regards, > > Michael > > FastJack wrote: > > >the problem not only occures when I use both phones - when I'm using phone 1 > >and annother calls "knocks on" for example - the sound is also not > >ok. > > > >any hints? I'm using a VIA C3 600 MHz with a dual-riser from VIA > >(make 2 PCI-slots out of one). maybe this is the problem ?! > > > >- Original Message - > >From: "FastJack" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Saturday, June 26, 2004 12:52 PM > >Subject: [Asterisk-Users] problem with zaphfc > > > > > > > > > >>hi everybody, > >> > >>I'm running my asterisk with a HFC-S card in NT-mode with a "modded" NTBA > >>(NT1) (=simply crossed cable) and two ISDN-phone behind it. Now, > >>when ever > >> > >> > >I > > > > > >>user both phones at the same time, the sound is very, very crappy, > >>as if > >> > >> > >it > > > > > >>is played at a slower speed (like playing a 7'' single at 33 speed - > >>in those old venyl days). > >> > >>I have not modified my NTBA with a second ohm resistors - can this > >>be the > >>problem? > >> > >>thank you! > >> > >> > >>___ > >>Asterisk-Users mailing list > >>[EMAIL PROTECTED] > >>http://lists.digium.com/mailman/listinfo/asterisk-users > >>To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> > >> > >> > > > > > >___ > >Asterisk-Users mailing list > >[EMAIL PROTECTED] > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] problem with zaphfc
Hi, I've tried the card (and asterisk-version) with a different computer (athlon t-bird) and there I have no problems. DAMMN!!! What can cause this trouble? The computer is a VIA C3 600 MHz / 256 MB RAM. It has a 90W powersupply, IRQ is not shared. Tried both PCI-Slots (the VIA C3 uses a special RISER-card to make 2 PCI-slot out of one). But I've tried without this riser and the problem is the same. No other devices are attached (only harddisk, ram, the HFC-S). Problem still occurs. with "slow" I mean : distorted, sound as if some frames are to high, others to low. can anyone help me?! PLEASE!!! - Original Message - From: "Michael Sandee" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, June 26, 2004 8:41 PM Subject: Re: [Asterisk-Users] problem with zaphfc > What you describe as slow sound is most likely not a problem with the > driver.. atleast.. very unlikely. Neither with hardware... > > You need proper 100ohm termination on your bus, please check that. > > Slow sound is a very very wierd problem... you can experience clicks, > noise and/or frame (voice) drops under bad conditions (improper > configuration of hardware or software). > > If possible try to issolate the source of the problem, using different > hardware, changing asterisk version or whatever you see fit. > > Regards, > > Michael > > FastJack wrote: > > >the problem not only occures when I use both phones - when I'm using phone 1 > >and annother calls "knocks on" for example - the sound is also not ok. > > > >any hints? I'm using a VIA C3 600 MHz with a dual-riser from VIA (make 2 > >PCI-slots out of one). maybe this is the problem ?! > > > >- Original Message - > >From: "FastJack" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Saturday, June 26, 2004 12:52 PM > >Subject: [Asterisk-Users] problem with zaphfc > > > > > > > > > >>hi everybody, > >> > >>I'm running my asterisk with a HFC-S card in NT-mode with a "modded" NTBA > >>(NT1) (=simply crossed cable) and two ISDN-phone behind it. Now, when ever > >> > >> > >I > > > > > >>user both phones at the same time, the sound is very, very crappy, as if > >> > >> > >it > > > > > >>is played at a slower speed (like playing a 7'' single at 33 speed - in > >>those old venyl days). > >> > >>I have not modified my NTBA with a second ohm resistors - can this be the > >>problem? > >> > >>thank you! > >> > >> > >>___ > >>Asterisk-Users mailing list > >>[EMAIL PROTECTED] > >>http://lists.digium.com/mailman/listinfo/asterisk-users > >>To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> > >> > >> > > > > > >___ > >Asterisk-Users mailing list > >[EMAIL PROTECTED] > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] problem with zaphfc
What you describe as slow sound is most likely not a problem with the driver.. atleast.. very unlikely. Neither with hardware... You need proper 100ohm termination on your bus, please check that. Slow sound is a very very wierd problem... you can experience clicks, noise and/or frame (voice) drops under bad conditions (improper configuration of hardware or software). If possible try to issolate the source of the problem, using different hardware, changing asterisk version or whatever you see fit. Regards, Michael FastJack wrote: the problem not only occures when I use both phones - when I'm using phone 1 and annother calls "knocks on" for example - the sound is also not ok. any hints? I'm using a VIA C3 600 MHz with a dual-riser from VIA (make 2 PCI-slots out of one). maybe this is the problem ?! - Original Message - From: "FastJack" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, June 26, 2004 12:52 PM Subject: [Asterisk-Users] problem with zaphfc hi everybody, I'm running my asterisk with a HFC-S card in NT-mode with a "modded" NTBA (NT1) (=simply crossed cable) and two ISDN-phone behind it. Now, when ever I user both phones at the same time, the sound is very, very crappy, as if it is played at a slower speed (like playing a 7'' single at 33 speed - in those old venyl days). I have not modified my NTBA with a second ohm resistors - can this be the problem? thank you! ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] problem with zaphfc
the problem not only occures when I use both phones - when I'm using phone 1 and annother calls "knocks on" for example - the sound is also not ok. any hints? I'm using a VIA C3 600 MHz with a dual-riser from VIA (make 2 PCI-slots out of one). maybe this is the problem ?! - Original Message - From: "FastJack" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, June 26, 2004 12:52 PM Subject: [Asterisk-Users] problem with zaphfc > hi everybody, > > I'm running my asterisk with a HFC-S card in NT-mode with a "modded" NTBA > (NT1) (=simply crossed cable) and two ISDN-phone behind it. Now, when ever I > user both phones at the same time, the sound is very, very crappy, as if it > is played at a slower speed (like playing a 7'' single at 33 speed - in > those old venyl days). > > I have not modified my NTBA with a second ohm resistors - can this be the > problem? > > thank you! > > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem With zaphfc
rc19 work better for me rc20a is less stable on my configuration (driver crash / line 50% not correctly hangup) At 15:37 23/04/2004, you wrote: Yes i use this version Thank's Tiziano - Original Message - From: <mailto:[EMAIL PROTECTED]>Robinson Tim-W10277 To: '[EMAIL PROTECTED]' Sent: Friday, April 23, 2004 2:59 PM Subject: RE: [Asterisk-Users] Problem With zaphfc You don't say which version you are using, but upgrade to RC20a. There were some ISDN Layer 2 issues in earlier versions which have been fixed recently. <http://ns1.jnetdns.de/jn/relaunch/asterisk/downloads/bri-stuff-0.0.2rc20a.tar.gz>http://ns1.jnetdns.de/jn/relaunch/asterisk/downloads/bri-stuff-0.0.2rc20a.tar.gz Rgds Tim -Original Message- From: <mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tiziano Crescimbeni Sent: 23 April 2004 11:42 To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Problem With zaphfc I've this error How i can find the problem? Apr 23 12:24:43 WARNING[131081]: PRI: received TEI check request for TEI = 89 Apr 23 12:24:47 WARNING[131081]: PRI: received TEI check request for TEI = 89 Apr 23 12:24:48 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1 Apr 23 12:24:53 WARNING[131081]: PRI: received TEI check request for TEI = 89 Apr 23 12:25:02 WARNING[131081]: PRI: received TEI check request for TEI = 89 Apr 23 12:25:03 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1 Apr 23 12:25:09 WARNING[131081]: PRI: received TEI check request for TEI = 89 Apr 23 12:25:13 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 2 now, updating n_r! Apr 23 12:25:13 WARNING[131081]: PRI: !! Got reject for frame 3, but we have nothing -- resetting! Apr 23 12:25:23 WARNING[131081]: PRI: received TEI check request for TEI = 89 Apr 23 12:25:26 WARNING[131081]: PRI: received TEI check request for TEI = 89 Apr 23 12:25:39 WARNING[131081]: Ring requested on channel 1 already in use on span 1. Hanging up owner. Apr 23 12:26:22 WARNING[131081]: Ring requested on channel 2 already in use on span 1. Hanging up owner. Apr 23 12:47:33 WARNING[131081]: PRI: Double assgined TEI! Apr 23 12:47:33 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1 Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 2 now, updating n_r! Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 3 now, updating n_r! Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 4 now, updating n_r! Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 5 now, updating n_r! Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 6 now, updating n_r! Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 7 now, updating n_r! Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 8 now, updating n_r! Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 9 now, updating n_r! Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 10 now, updating n_r! Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 11 now, updating n_r! Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 12 now, updating n_r! Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 13 now, updating n_r! Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 14 now, updating n_r! Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 15 now, updating n_r! Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 16 now, updating n_r! Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 17 now, updating n_r! Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 18 now, updating n_r! Apr 23 12:47:43 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1 Apr 23 12:47:44 WARNING[131081]: PRI: ACK received outside of window, restarting Apr 23 12:48:16 WARNING[16384]: MySQL database sock file not specified. Using default Apr 23 12:48:16 WARNING[16384]: No '=' (equal sign) in line 34 of mgcp.conf Apr 23 12:48:16 WARNING[16384]: Ignoring port for now Apr 23 12:49:14 NOTICE[311316]: Unable to create channel of type 'Zap' Apr 23 12:49:24 WARNING[311316]: Timeout, but no rule 't' in context 'archimedia' Apr 23 12:49:38 NOTICE[327700]: Unable to create channel of type 'Zap' Apr 23 12:49:48 WARNING[327700]: Timeout, but no rule 't' in context 'archimedia' Apr 23 12:51:39 WARNING[16384]: MySQL database sock file not specified. Using defa
Re: [Asterisk-Users] Problem With zaphfc
Title: Message Yes i use this version Thank's Tiziano - Original Message - From: Robinson Tim-W10277 To: '[EMAIL PROTECTED]' Sent: Friday, April 23, 2004 2:59 PM Subject: RE: [Asterisk-Users] Problem With zaphfc You don't say which version you are using, but upgrade to RC20a. There were some ISDN Layer 2 issues in earlier versions which have been fixed recently. http://ns1.jnetdns.de/jn/relaunch/asterisk/downloads/bri-stuff-0.0.2rc20a.tar.gz Rgds Tim -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tiziano CrescimbeniSent: 23 April 2004 11:42To: [EMAIL PROTECTED]Subject: [Asterisk-Users] Problem With zaphfc I've this error How i can find the problem? Apr 23 12:24:43 WARNING[131081]: PRI: received TEI check request for TEI = 89Apr 23 12:24:47 WARNING[131081]: PRI: received TEI check request for TEI = 89Apr 23 12:24:48 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1Apr 23 12:24:53 WARNING[131081]: PRI: received TEI check request for TEI = 89Apr 23 12:25:02 WARNING[131081]: PRI: received TEI check request for TEI = 89Apr 23 12:25:03 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1Apr 23 12:25:09 WARNING[131081]: PRI: received TEI check request for TEI = 89Apr 23 12:25:13 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 2 now, updating n_r!Apr 23 12:25:13 WARNING[131081]: PRI: !! Got reject for frame 3, but we have nothing -- resetting!Apr 23 12:25:23 WARNING[131081]: PRI: received TEI check request for TEI = 89Apr 23 12:25:26 WARNING[131081]: PRI: received TEI check request for TEI = 89Apr 23 12:25:39 WARNING[131081]: Ring requested on channel 1 already in use on span 1. Hanging up owner.Apr 23 12:26:22 WARNING[131081]: Ring requested on channel 2 already in use on span 1. Hanging up owner.Apr 23 12:47:33 WARNING[131081]: PRI: Double assgined TEI!Apr 23 12:47:33 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 2 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 3 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 4 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 5 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 6 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 7 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 8 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 9 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 10 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 11 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 12 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 13 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 14 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 15 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 16 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 17 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 18 now, updating n_r!Apr 23 12:47:43 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1Apr 23 12:47:44 WARNING[131081]: PRI: ACK received outside of window, restartingApr 23 12:48:16 WARNING[16384]: MySQL database sock file not specified. Using defaultApr 23 12:48:16 WARNING[16384]: No '=' (equal sign) in line 34 of mgcp.confApr 23 12:48:16 WARNING[16384]: Ignoring port for nowApr 23 12:49:14 NOTICE[311316]: Unable to create channel of type 'Zap'Apr 23 12:49:24 WARNING[311316]: Timeout, but no rule 't' in context 'archimedia'Apr 23 12:49:38 NOTICE[327700]: Unable to create channel of type 'Zap'Apr 23 12:49:48 WARNING[327700]: Timeout, but no rule 't' in context 'archimedia'Apr 23 12:51:39 WARNING[16384]: MySQL database sock file not specified. Using defaultApr 2
RE: [Asterisk-Users] Problem With zaphfc
Title: Message You don't say which version you are using, but upgrade to RC20a. There were some ISDN Layer 2 issues in earlier versions which have been fixed recently. http://ns1.jnetdns.de/jn/relaunch/asterisk/downloads/bri-stuff-0.0.2rc20a.tar.gz Rgds Tim -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tiziano CrescimbeniSent: 23 April 2004 11:42To: [EMAIL PROTECTED]Subject: [Asterisk-Users] Problem With zaphfc I've this error How i can find the problem? Apr 23 12:24:43 WARNING[131081]: PRI: received TEI check request for TEI = 89Apr 23 12:24:47 WARNING[131081]: PRI: received TEI check request for TEI = 89Apr 23 12:24:48 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1Apr 23 12:24:53 WARNING[131081]: PRI: received TEI check request for TEI = 89Apr 23 12:25:02 WARNING[131081]: PRI: received TEI check request for TEI = 89Apr 23 12:25:03 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1Apr 23 12:25:09 WARNING[131081]: PRI: received TEI check request for TEI = 89Apr 23 12:25:13 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 2 now, updating n_r!Apr 23 12:25:13 WARNING[131081]: PRI: !! Got reject for frame 3, but we have nothing -- resetting!Apr 23 12:25:23 WARNING[131081]: PRI: received TEI check request for TEI = 89Apr 23 12:25:26 WARNING[131081]: PRI: received TEI check request for TEI = 89Apr 23 12:25:39 WARNING[131081]: Ring requested on channel 1 already in use on span 1. Hanging up owner.Apr 23 12:26:22 WARNING[131081]: Ring requested on channel 2 already in use on span 1. Hanging up owner.Apr 23 12:47:33 WARNING[131081]: PRI: Double assgined TEI!Apr 23 12:47:33 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 2 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 3 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 4 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 5 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 6 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 7 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 8 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 9 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 10 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 11 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 12 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 13 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 14 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 15 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 16 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 17 now, updating n_r!Apr 23 12:47:42 WARNING[131081]: PRI: !! Got reject for frame 2, retransmitting frame 18 now, updating n_r!Apr 23 12:47:43 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1Apr 23 12:47:44 WARNING[131081]: PRI: ACK received outside of window, restartingApr 23 12:48:16 WARNING[16384]: MySQL database sock file not specified. Using defaultApr 23 12:48:16 WARNING[16384]: No '=' (equal sign) in line 34 of mgcp.confApr 23 12:48:16 WARNING[16384]: Ignoring port for nowApr 23 12:49:14 NOTICE[311316]: Unable to create channel of type 'Zap'Apr 23 12:49:24 WARNING[311316]: Timeout, but no rule 't' in context 'archimedia'Apr 23 12:49:38 NOTICE[327700]: Unable to create channel of type 'Zap'Apr 23 12:49:48 WARNING[327700]: Timeout, but no rule 't' in context 'archimedia'Apr 23 12:51:39 WARNING[16384]: MySQL database sock file not specified. Using defaultApr 23 12:51:39 WARNING[16384]: No '=' (equal sign) in line 34 of mgcp.confApr 23 12:51:40 WARNING[16384]: Ignoring port for now