RE: [Asterisk-Users] TE405P Dropping Calls. !! Got I-frame while linkstate 0

2006-06-23 Thread Watkins, Bradley
I would say it's almost certainly a cabling issue of some sort.  We get
the S-frame while link down message all the time on our Asterisk
clusters due to the way the T1 failover switch works.  It's harmless in
our case since really the PRI is connected to the other box in the
cluster (unless there is a card failure, of course).  But for your
application, I'm sure you'd like it to be up. :)

Regards,
- Brad

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Brian
Stuart
Sent: Thursday, June 22, 2006 6:55 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] TE405P Dropping Calls. !! Got I-frame while
linkstate 0

Hello we have an * setup using a TE405P with a crossover to a Dialogic
PRI card. The machine with the Dialogic card is an automated call
generator. The asterisk machine is being used as a test platform to
answer the incoming calls play an audio file then record the incoming
audio. This set up has been working nicely when the calls were coming in
on a SIP channel.
However when call come in on the PRI it seems that * randomly drops all
channels. Some times every 30 seconds sometimes every 10 minutes. 
The * CLI will get the errors shown below. I have seen similar postings
about this error but found no explanation or solution.

The asterisk machine has no shared interrupts.

Could this be a cabling issue?

Write to 36 failed: Unknown error 500
Short write: 0/15 (Broken pipe)
 -- Executing Hangup(Zap/2-1, ) in new stack !! Got I-frame
while link state 0
 -- Hungup 'Zap/2-1'
!! Got S-frame while link down
!! Frame got rejected!
   == Primary D-Channel on span 1 up
 -- Executing Hangup(Zap/1-1, ) in new stack



Brian Stuart
Edulink Systems, Inc.
1(888)338-7177 ext. 219
http://www.edulinksys.com/ 


___
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

The contents of this e-mail are intended for the named addressee only. It 
contains information that may be confidential. Unless you are the named 
addressee or an authorized designee, you may not copy or use it, or disclose it 
to anyone else. If you received it in error please notify us immediately and 
then destroy it. 
___
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


RE: [Asterisk-Users] TE405P Dropping Calls

2005-08-05 Thread James Bean

Update...

Figured out it was a faulty port in the te405p, swapped to a spare port
and all it good, now to get warranty.

James 

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of James Bean
Sent: Saturday, 6 August 2005 10:54 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] TE405P Dropping Calls


Hi,

Urgently response would be wonderful, system is a Fedora Core 2.

I have a Ericsson BP250 connected to 1 port on the TE405P and another
connected to a local telco ISDN30.

I have been running CVS-HEAD from about a 2 months ago and upgraded it
again just in cause it was a version issue (didn't fix it) but this is
what I am getting.

When a person calls out from an extension on the BP250 to the outside
world, every 2-5 minutes randomly it drops all active calls with the
following error on console.

 == Spawn extension (te405p-intelstra, 38166483, 2) exited non-zero on
'Zap/5-1'
-- Hungup 'Zap/2-1'
  == Spawn extension (te405p-frombp250, 00402270883, 1) exited non-zero
on 'Zap/95-1'
-- Hungup 'Zap/98-1'
  == Spawn extension (te405p-intelstra, 38166483, 2) exited non-zero on
'Zap/7-1'
-- Hungup 'Zap/1-1'
  == Spawn extension (te405p-frombp250, 00417513573, 1) exited non-zero
on 'Zap/94-1'
-- Hungup 'Zap/97-1'
  == Spawn extension (te405p-intelstra, 38165965, 2) exited non-zero on
'Zap/6-1'
-- Hungup 'Zap/5-1'
-- Hungup 'Zap/95-1'
-- Hungup 'Zap/7-1'
-- Hungup 'Zap/94-1'
-- Hungup 'Zap/6-1'
!! Got reject for frame 77, retransmitting frame 77 now, updating n_r!
!! Got reject for frame 77, retransmitting frame 78 now, updating n_r!
!! Got reject for frame 77, retransmitting frame 79 now, updating n_r!
!! Got reject for frame 77, retransmitting frame 80 now, updating n_r!
!! Got reject for frame 77, retransmitting frame 81 now, updating n_r!

If I unplug the ISDN30 from asterisk and plug it directly into the BP250
it works fine no problems.

It only just started happening and there have been no changes to the
system configuration or setup for over 2 weeks, I am tempted to try and
downgrade to 1.0.7. Although the telco did add additional DID's for the
ISDN 30, which were added to the extensions.conf, but with them removed
it still did the same thing.

My configuration files are as follows :-

/etc/zaptel.conf
span=1,1,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
span=2,1,0,ccs,hdb3,crc4
bchan=32-46
dchan=47
bchan=48-62
span=3,1,0,ccs,hdb3,crc4
bchan=63-77
dchan=78
bchan=79-93
span=4,1,0,ccs,hdb3,crc4
bchan=94-108
dchan=109
bchan=110-124

loadzone=au

/etc/asterisk/zapata.conf
[channels]
context=default
musiconhold=default
switchtype=euroisdn
usecallerid=yes
cidsignalling=v23
cidstart=polarity
hidecallerid=no
callwaiting=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=800
rxgain=0.0
txgain=0.0

group=1
context=te405p-intelstra
;context=te405p-ext
pridialplan=local
signalling=pri_cpe
;overlapdial=yes
callerid=asreceived
channel=1-15, 17-31

group=4
context=te405p-frombp250
;context=te405p-in
pridialplan=local
signalling=pri_net
overlapdial=yes
callerid=asreceived
channel=94-108, 110-124

/etc/asterisk/extensions.conf
[dialstring]

exten = i,1,Playback(invalid)
exten = i,2,Hangup
exten = t,1,Hangup

[te405p-frombp250]

include = to-sip
include = te405p-outtelstra

[te405p-tobp250]

exten = _2XX,1,Dial(Zap/g4/${EXTEN},60,r) exten =
_4XX,1,Dial(Zap/g4/${EXTEN},60,r) exten =
_7XX,1,Dial(Zap/g4/${EXTEN},60,r) exten =
_1XXX,1,Dial(Zap/g4/${EXTEN},60,r)
exten = _73816592XX,1,Dial(Zap/g4/${EXTEN:7},60,r)

[te405p-intelstra]

exten = s,1,SetMusicOnHold(record)
exten = s,2,Dial(SIP/bt-pavilion,45,t)
exten = s,4,VoiceMail,u500
exten = s,5,Hangup

exten = 38166400,1,SetMusicOnHold(random) exten =
38166400,2,Dial(Zap/g4/9,600,t) exten = 38166400,3,VoiceMail,u500 exten
= 38166400,4,Hangup

;Main Number 3282 2922 comes in on 38166483 exten =
38166483,1,SetMusicOnHold(random) exten =
38166483,2,Dial(Zap/g4/9,6000,t) exten = 38166483,3,VoiceMail,u500
exten = 38166483,4,Hangup

;Tempory Number for Darryl
exten = 38166488,1,SetMusicOnHold(random) exten =
38166488,2,Dial(Zap/g4/483,6000,t)
exten = 38166488,3,VoiceMail,u500
exten = 38166488,4,Hangup

exten = 32822922,1,SetMusicOnHold(random) exten =
32822922,2,Dial(Zap/g4/9,600,t) exten = 32822922,3,VoiceMail,u500 exten
= 32822922,4,Hangup

;exten =
38166444,1,SetVar(CALLFILENAME=/mnt/asterisk/38166444/${CALLERID}-${TIME
STAMP})
;exten = 38166444,2,Monitor(gsm,${CALLFILENAME},m)
exten = 38166444,1,Dial(Zap/g4/9)

;exten =
38166483,1,SetVar(CALLFILENAME=/mnt/asterisk/38166483/${CALLERID}-${TIME
STAMP})
;exten = 38166483,2,Monitor(gsm,${CALLFILENAME},m)
;exten = 38166483,3,Dial(Zap/g4/483)

exten = _381684XX,1,SetMusicOnHold(record)
exten = _381684XX,2,Dial(Zap/g4/2${EXTEN:-2},600,t)
exten = _381684XX,3,VoiceMail,u500
exten = _381684XX,4,Hangup

exten =