Re: [Asterisk-Users] Timing source on SMP system - Disable RTC forzaprtc
Chad Brown wrote: Kristian, I have 2 X100P cards but neither work on my Compaq DL360 G2. The system will not even boot! Take a look at my initial post and let me know if you have any other advice. Regardless, thanks for your post! Oh that was you? I read that post earlier but obviously didn't put it together... I don't know about this, but have you tried an add-on usb-uhci controller (your motherboard is OHCI, right)? I don't know if that would work, but you could try it... What about a TDM400 with a module (any module FXS/FXO)? -- Kristian Kielhofner ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Timing source on SMP system - Disable RTC forzaprtc
Kristian, I have 2 X100P cards but neither work on my Compaq DL360 G2. The system will not even boot! Take a look at my initial post and let me know if you have any other advice. Regardless, thanks for your post! - I need a timing device for the DL360G2 for conferencing and meetme. For a timing device I have 2 X100P cards but neither will work in my DL360G2. The system will not even boot with either card in the system. Other PCI cards seems to work fine. I called Digium support and was told that there must be a conflict between the card and my Compaq DL360G2. I then moved on to ztdummy. I'm sure the DL360 G2 has a OHBI rather than UHBI controller. That said, I got this message during modprobe ztdummy: [EMAIL PROTECTED] zaptel]# modprobe ztdummy /lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o: insmod /lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o failed /lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o: insmod ztdummy failed I then moved on to zaprtc. However, I was told that this solution will not work with SMP systems. My DL360G2 is a dual proc machine. I'm running out of options here...please advise. Thanks, -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kristian Kielhofner Sent: Sunday, September 19, 2004 1:29 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Timing source on SMP system - Disable RTC forzaprtc Chad Brown wrote: > Does anyone know where to disable rtc support on redhat 9.0 using make > menuconfig? > > I thought I disabled it but still got the following error when trying to > make zaprtc: > > zaprtc.c:109: storage size of `rtc_irq_timer' isn't known > zaprtc.c:719: storage size of `rtc_fops' isn't known > zaprtc.c:107: warning: `DECLARE_WAIT_QUEUE_HEAD' declared `static' but > never defined > make: *** [zaprtc.o] Error 1 > > Thanks, > > Chad Chad, Real time clock under character devices in make menuconfig. I just did this on RHEL 3 WS (my laptop), so it should be similar. Also, good luck with this on an SMP box, because many people (on the list and elsewhere) can tell you that it is certainly not an optimal solution. If you have an SMP box, and want to do conferencing, buy some Digium hardware! -- Kristian Kielhofner ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Timing source on SMP system - Disable RTC forzaprtc
It was my understanding that you don't 'disable' rtc, but recompile it as a kernel module. Again, just my understanding as I can't try it until monday. Matthew - Original Message - From: "Chad Brown" <[EMAIL PROTECTED]> To: "Michael Bielicki" <[EMAIL PROTECTED]>; "Asterisk Users Mailing List - Non-Commercial Discussion" <[EMAIL PROTECTED]> Sent: Sunday, September 19, 2004 1:13 PM Subject: RE: [Asterisk-Users] Timing source on SMP system - Disable RTC forzaprtc Does anyone know where to disable rtc support on redhat 9.0 using make menuconfig? I thought I disabled it but still got the following error when trying to make zaprtc: zaprtc.c:109: storage size of `rtc_irq_timer' isn't known zaprtc.c:719: storage size of `rtc_fops' isn't known zaprtc.c:107: warning: `DECLARE_WAIT_QUEUE_HEAD' declared `static' but never defined make: *** [zaprtc.o] Error 1 Thanks, Chad -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Bielicki Sent: Saturday, September 18, 2004 9:20 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Timing source on SMP system try zaprtc from www.junghanns.net. Works fine in my SMP systems - Original Message - From: Chad Brown <[EMAIL PROTECTED]> Date: Sat, 18 Sep 2004 20:23:54 -0700 Subject: [Asterisk-Users] Timing source on SMP system To: Asterisk Users Mailing List - Non-Commercial Discussion <[EMAIL PROTECTED]> I need a timing device for the DL360G2 for conferencing and meetme. For a timing device I have 2 X100P cards but neither will work in my DL360G2. The system will not even boot with either card in the system. Other PCI cards seems to work fine. I called Digium support and was told that there must be a conflict between the card and my Compaq DL360G2. I then moved on to ztdummy. I'm sure the DL360 G2 has a OHBI rather than UHBI controller. That said, I got this message during modprobe ztdummy: [EMAIL PROTECTED] zaptel]# modprobe ztdummy /lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o: insmod /lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o failed /lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o: insmod ztdummy failed I then moved on to zaprtc. However, I was told that this solution will not work with SMP systems. My DL360G2 is a dual proc machine. I'm running out of options here...please advise. Thanks, Chad M. Brown Infrastructure Architect identity mine, inc. - http://www.identitymine.com [EMAIL PROTECTED] 253.927.7737 - Office 866.4ID.MINE (866.443.6463) - Toll free 253.405.6726 - Cellular 253.444.5170 - Fax ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Michael Bielicki ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users