Re: [asterisk-users] TDM400 with 1 FXO
you don't have to connect the power connecter to TDM if you are using FXO, it's used with FXS to generate a signal to phones 2007/2/9, MBIT Technologies <[EMAIL PROTECTED]>: Hi David Also make sure the power connector is also connected to the board. Regards Mark Brooker T: 02 4959 8670 M: 0415 846 865 F: 02 4950 5609 E: [EMAIL PROTECTED] W: http://www.mbit.com.au -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Klaverstyn, David C Sent: Friday, 9 February 2007 1:08 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] TDM400 with 1 FXO Hi, Yes it should, I have changed it back and is still causing the same problems. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leo Ann Boon Sent: Friday, 9 February 2007 12:02 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] TDM400 with 1 FXO Klaverstyn, David C wrote: > > Hi All, > > > > I cannot get my TDM to work correctly. > > > > In my /etc/zaptel.conf file I have > > loadzone = us > > defaultzone=us > > > > fxoks=1 > Shouldn't this be fxsks if you're using an FXO module as analog trunk? Leo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] TDM400 with 1 FXO
Leo Ann Boon wrote: Klaverstyn, David C wrote: Yes, I have also since put that in and I get the error: Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring signalling And if I put in rxwink I get this error: Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring rxwink It's all very strange. please post your complete zapata.conf - I think there's a preceding line that's confusing the parser. Leo No, I think what he is doing is a reload, and on a reload Asterisk does not re-setup these settings, so Asterisk is nicely telling you on a reload these are ingnored. I think a 'stop now' would get these settings. -- thanks, Yusuf ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] TDM400 with 1 FXO
On Fri, Feb 09, 2007 at 01:30:02PM +1100, Klaverstyn, David C wrote: > Yes, I have also since put that in and I get the error: > Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring > signalling > > And if I put in rxwink I get this error: > Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring > rxwink (Somebody please translate this to asterisk 1.4 syntax) To apply changes in /etc/zaptel.conf, you need to run ztcfg . To apply most changes in /etc/asterisk/zapata.conf you just need to reload asterisk: 'reload' on the CLI, or even more specifically: 'reload chan_zap.so' However certain major changes (basically: adding a channel or chaging its signalling) require a full restart of asterisk: restart now Alternatively, try just 'zap restart' if you have it. It will disconnect existing zaptel calls. You may also need to run it twice. -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] TDM400 with 1 FXO
Try to do "lspci" to see if your card has been found by linux os. And then, try the command "lsmod" to see if the zaptel module and wctdm module have been loaded. "Klaverstyn, David C" <[EMAIL PROTECTED]> wrote: When I made a change I was always doing a ztcfg -vv and then an asterisk reload. I have rebooted the server now but still have the same problem. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leo Ann Boon Sent: Friday, 9 February 2007 2:32 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] TDM400 with 1 FXO Klaverstyn, David C wrote: > My original post does have the contents of the file exactly. > > In my /etc/asterisk/zapata.conf file I have > [trunkgroups] > > [channels] > context=from-pstn > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > > You need to insert signalling before the channel statement: signalling=fxs_ks > channel => 1 > > >> Yes, I have also since put that in and I get the error: >> Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring >> signalling >> This warning happens when you change the signalling in zapata.conf without restarting asterisk. I suspect you did a zap reload on the console. I'd suggest you restart both zaptel and asterisk to keep everything in sync. Leo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users = Provide IAX2 termination for VOIP beginners and individual end-users. No minimum usage. Register now and get free $0.2 credit. http://www.unifycall.com =___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] TDM400 with 1 FXO
From: "Klaverstyn, David C" <[EMAIL PROTECTED]> Date: Fri, 9 Feb 2007 13:30:02 +1100 Yes, I have also since put that in and I get the error: Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring signalling This is not quite an error. Did you do a reload or a fresh start? I get this warning every time I reload. Have you tried 'show modules like chan_' or 'show channeltypes' and confirm that chan_zap is not loaded after putting in signalling=fxs_ks (not fxsks like in zaptel.conf)? If anything, test if wctdm is indeed configured correctly using zttool (under your compiled source tree). Yuan Liu And if I put in rxwink I get this error: Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring rxwink It's all very strange. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leo Ann Boon Sent: Friday, 9 February 2007 12:20 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] TDM400 with 1 FXO Klaverstyn, David C wrote: > Hi, > > Yes it should, I have changed it back and is still causing the same > problems. > Did you also missed out the following line in zapata.conf? signalling=fxs_ks Leo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] TDM400 with 1 FXO
When I made a change I was always doing a ztcfg -vv and then an asterisk reload. I have rebooted the server now but still have the same problem. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leo Ann Boon Sent: Friday, 9 February 2007 2:32 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] TDM400 with 1 FXO Klaverstyn, David C wrote: > My original post does have the contents of the file exactly. > > In my /etc/asterisk/zapata.conf file I have > [trunkgroups] > > [channels] > context=from-pstn > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > > You need to insert signalling before the channel statement: signalling=fxs_ks > channel => 1 > > >> Yes, I have also since put that in and I get the error: >> Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring >> signalling >> This warning happens when you change the signalling in zapata.conf without restarting asterisk. I suspect you did a zap reload on the console. I'd suggest you restart both zaptel and asterisk to keep everything in sync. Leo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] TDM400 with 1 FXO
Klaverstyn, David C wrote: My original post does have the contents of the file exactly. In my /etc/asterisk/zapata.conf file I have [trunkgroups] [channels] context=from-pstn usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no You need to insert signalling before the channel statement: signalling=fxs_ks channel => 1 Yes, I have also since put that in and I get the error: Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring signalling This warning happens when you change the signalling in zapata.conf without restarting asterisk. I suspect you did a zap reload on the console. I'd suggest you restart both zaptel and asterisk to keep everything in sync. Leo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] TDM400 with 1 FXO
Hi, I stuffed Up, Here is my correct contents ; Configuration file [trunkgroups] [channels] language=en context=from-pstn signalling=fxs_ks rxwink=300 ; Atlas seems to use long (250ms) winks ; ; Whether or not to do distinctive ring detection on FXO lines ; ;usedistinctiveringdetection=yes busydetect=yes busycount=6 usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no echotraining=800 rxgain=0.0 txgain=0.0 group=0 callgroup=1 pickupgroup=1 immediate=no channel => 1 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yuan LIU Sent: Friday, 9 February 2007 2:29 PM To: asterisk-users@lists.digium.com Subject: RE: [asterisk-users] TDM400 with 1 FXO >From: "Klaverstyn, David C" <[EMAIL PROTECTED]> >Date: Fri, 9 Feb 2007 15:12:49 +1100 > >My original post does have the contents of the file exactly. You haven't defined channel signaling in zapata.conf. Need something like signalling = fxs_ks according to your zaptel.conf. Yuan Liu >In my /etc/asterisk/zapata.conf file I have >[trunkgroups] > >[channels] >context=from-pstn >usecallerid=yes >hidecallerid=no >callwaiting=yes >usecallingpres=yes >callwaitingcallerid=yes >threewaycalling=yes >transfer=yes >canpark=yes >cancallforward=yes >callreturn=yes >echocancel=yes >echocancelwhenbridged=yes >rxgain=0.0 >txgain=0.0 >group=1 >callgroup=1 >pickupgroup=1 >immediate=no > >channel => 1 > > >-Original Message- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Leo Ann >Boon >Sent: Friday, 9 February 2007 12:44 PM >To: Asterisk Users Mailing List - Non-Commercial Discussion >Subject: Re: [asterisk-users] TDM400 with 1 FXO > >Klaverstyn, David C wrote: > > Yes, I have also since put that in and I get the error: > > Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring > > signalling > > > > And if I put in rxwink I get this error: > > Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring > > rxwink > > > > It's all very strange. > > >please post your complete zapata.conf - I think there's a preceding line > >that's confusing the parser. > >Leo > >___ >--Bandwidth and Colocation provided by Easynews.com -- > >asterisk-users mailing list >To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users >___ >--Bandwidth and Colocation provided by Easynews.com -- > >asterisk-users mailing list >To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] TDM400 with 1 FXO
From: "Klaverstyn, David C" <[EMAIL PROTECTED]> Date: Fri, 9 Feb 2007 15:12:49 +1100 My original post does have the contents of the file exactly. You haven't defined channel signaling in zapata.conf. Need something like signalling = fxs_ks according to your zaptel.conf. Yuan Liu In my /etc/asterisk/zapata.conf file I have [trunkgroups] [channels] context=from-pstn usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no channel => 1 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leo Ann Boon Sent: Friday, 9 February 2007 12:44 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] TDM400 with 1 FXO Klaverstyn, David C wrote: > Yes, I have also since put that in and I get the error: > Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring > signalling > > And if I put in rxwink I get this error: > Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring > rxwink > > It's all very strange. > please post your complete zapata.conf - I think there's a preceding line that's confusing the parser. Leo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] TDM400 with 1 FXO
My original post does have the contents of the file exactly. In my /etc/asterisk/zapata.conf file I have [trunkgroups] [channels] context=from-pstn usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no channel => 1 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leo Ann Boon Sent: Friday, 9 February 2007 12:44 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] TDM400 with 1 FXO Klaverstyn, David C wrote: > Yes, I have also since put that in and I get the error: > Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring > signalling > > And if I put in rxwink I get this error: > Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring > rxwink > > It's all very strange. > please post your complete zapata.conf - I think there's a preceding line that's confusing the parser. Leo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] TDM400 with 1 FXO
Klaverstyn, David C wrote: Yes, I have also since put that in and I get the error: Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring signalling And if I put in rxwink I get this error: Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring rxwink It's all very strange. please post your complete zapata.conf - I think there's a preceding line that's confusing the parser. Leo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] TDM400 with 1 FXO
Yes, I have also since put that in and I get the error: Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring signalling And if I put in rxwink I get this error: Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring rxwink It's all very strange. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leo Ann Boon Sent: Friday, 9 February 2007 12:20 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] TDM400 with 1 FXO Klaverstyn, David C wrote: > Hi, > > Yes it should, I have changed it back and is still causing the same > problems. > Did you also missed out the following line in zapata.conf? signalling=fxs_ks Leo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] TDM400 with 1 FXO
Hi David Also make sure the power connector is also connected to the board. Regards Mark Brooker T: 02 4959 8670 M: 0415 846 865 F: 02 4950 5609 E: [EMAIL PROTECTED] W: http://www.mbit.com.au -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Klaverstyn, David C Sent: Friday, 9 February 2007 1:08 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] TDM400 with 1 FXO Hi, Yes it should, I have changed it back and is still causing the same problems. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leo Ann Boon Sent: Friday, 9 February 2007 12:02 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] TDM400 with 1 FXO Klaverstyn, David C wrote: > > Hi All, > > > > I cannot get my TDM to work correctly. > > > > In my /etc/zaptel.conf file I have > > loadzone = us > > defaultzone=us > > > > fxoks=1 > Shouldn't this be fxsks if you're using an FXO module as analog trunk? Leo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] TDM400 with 1 FXO
Klaverstyn, David C wrote: Hi, Yes it should, I have changed it back and is still causing the same problems. Did you also missed out the following line in zapata.conf? signalling=fxs_ks Leo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] TDM400 with 1 FXO
Hi, Yes it should, I have changed it back and is still causing the same problems. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leo Ann Boon Sent: Friday, 9 February 2007 12:02 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] TDM400 with 1 FXO Klaverstyn, David C wrote: > > Hi All, > > > > I cannot get my TDM to work correctly. > > > > In my /etc/zaptel.conf file I have > > loadzone = us > > defaultzone=us > > > > fxoks=1 > Shouldn't this be fxsks if you're using an FXO module as analog trunk? Leo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] TDM400 with 1 FXO
Klaverstyn, David C wrote: Hi All, I cannot get my TDM to work correctly. In my /etc/zaptel.conf file I have loadzone = us defaultzone=us fxoks=1 Shouldn't this be fxsks if you're using an FXO module as analog trunk? Leo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
