RE: [asterisk-users] channel.c: Unable to request channel ZAP
Zap show channels shows only 2 or 3 channels to be in use ... others are not. Resetinterval is set to 1200 (20 minutes). -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Forrest Beck Sent: Thursday, November 02, 2006 4:50 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] channel.c: Unable to request channel ZAP What does zap show channels show? Are all the channels shown as in use? What is set in zapata.conf for resetinterval= ? If anything. I believe that resetinterval is used to reset unused channels for any channels that are left open. On 10/31/06, Asterisk [EMAIL PROTECTED] wrote: Hi All, I have one rather annoying problem...my PBX can work great for weeks, when suddenly I start receiving these messages when I try to make a zaptel call: Oct 31 13:52:47 NOTICE[15636] app_dial.c: Unable to create channel of type 'ZAP' (cause 34 - Circuit/channel congestion) Oct 31 13:52:49 NOTICE[15648] channel.c: Unable to request channel ZAP/g1/247 I'm using Sangoma A104 card (with four E1 spans), and these problems are only occurring on the first two spans (which are connected to a legacy PBX) - the second two spans, which are connected to the Telco, work perfectly. Even more: when these messages start to occur, I can hardly initiate any call via problematic two spans (1st and 2nd), where I can with no problem initiate a new call thru the unproblematic two spans (3rd and 4th). Restart of the Asterisk is the only cure so far... Does anyone know what could possibly be the cause, or how could I troubleshot this problem? Regards. Alex ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] channel.c: Unable to request channel ZAP
What does zap show channels show? Are all the channels shown as in use? What is set in zapata.conf for resetinterval= ? If anything. I believe that resetinterval is used to reset unused channels for any channels that are left open. On 10/31/06, Asterisk [EMAIL PROTECTED] wrote: Hi All, I have one rather annoying problem...my PBX can work great for weeks, when suddenly I start receiving these messages when I try to make a zaptel call: Oct 31 13:52:47 NOTICE[15636] app_dial.c: Unable to create channel of type 'ZAP' (cause 34 - Circuit/channel congestion) Oct 31 13:52:49 NOTICE[15648] channel.c: Unable to request channel ZAP/g1/247 I'm using Sangoma A104 card (with four E1 spans), and these problems are only occurring on the first two spans (which are connected to a legacy PBX) – the second two spans, which are connected to the Telco, work perfectly. Even more: when these messages start to occur, I can hardly initiate any call via problematic two spans (1st and 2nd), where I can with no problem initiate a new call thru the unproblematic two spans (3rd and 4th). Restart of the Asterisk is the only cure so far… Does anyone know what could possibly be the cause, or how could I troubleshot this problem? Regards. Alex ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] channel.c: Unable to request channel ZAP
Hi there I also get this error: Unable to create channel of type 'Zap' (cause 34 - Circuit/channel congestion) == Everyone is busy/congested at this time (1:0/1/0) whenever I try to call my Alcatel 4400 PBX etxn from SIP using TE110P. The output of zap show channels is: Chan Extension Context Language MusicOnHold pseudoincominguk default 1incominguk 2incominguk 3incominguk ...so on till 31incominguk except channel 16 which is delta All 30 channels show status FREE on the exchange end. Any help would be greatly appreciated. Regards Shweta -Original Message- From: [EMAIL PROTECTED] on behalf of Forrest Beck Sent: Thu 11/2/2006 9:19 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] channel.c: Unable to request channel ZAP What does zap show channels show? Are all the channels shown as in use? What is set in zapata.conf for resetinterval= ? If anything. I believe that resetinterval is used to reset unused channels for any channels that are left open. On 10/31/06, Asterisk [EMAIL PROTECTED] wrote: Hi All, I have one rather annoying problem...my PBX can work great for weeks, when suddenly I start receiving these messages when I try to make a zaptel call: Oct 31 13:52:47 NOTICE[15636] app_dial.c: Unable to create channel of type 'ZAP' (cause 34 - Circuit/channel congestion) Oct 31 13:52:49 NOTICE[15648] channel.c: Unable to request channel ZAP/g1/247 I'm using Sangoma A104 card (with four E1 spans), and these problems are only occurring on the first two spans (which are connected to a legacy PBX) - the second two spans, which are connected to the Telco, work perfectly. Even more: when these messages start to occur, I can hardly initiate any call via problematic two spans (1st and 2nd), where I can with no problem initiate a new call thru the unproblematic two spans (3rd and 4th). Restart of the Asterisk is the only cure so far. Does anyone know what could possibly be the cause, or how could I troubleshot this problem? Regards. Alex ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users winmail.dat___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users