Hi,
- Original Message -
From: [EMAIL PROTECTED]
Subject: [Asterisk-Users] IAX quesitons please.
Hello,everyone,
I encoutered some difficult with IAX when I run the asterisk.
internet -- asterisk + NAT -- DIAX
my * box and NAT are at the same linux box which connecting to the internet
using ADSL. The box has two network cards and two IP address,such as
public IP:211.11.11.11
private IP:192.168.1.10
the windows box running DIAX lies behind the NAT,it's IP is 192.168.1.12
Question1:
I use the DIAX register to the *, if I set the server IP in the DIAX to
192.168.1.10,then it will OK, but if I set the server IP in the DIAX to
211.11.11.11, then I will fail to register. I have tried all version of
DIAX
and alway got the same result. Why?
This is something normal. When you are inside your network use your internal
server IP address.
Usually the NAT router does not permit to connect to the external
IP address from inside.
Question2:
If I dial the IAX2 user registed to my * inside my NAT,it will success,but
if I dial other IAX2 user registed to my * in the internet (not inside
my NAT),I alway get the result:
== Everyone is busy at this time
Take care that there is an issue with DIAX and IAX2... after some time
(aprox.1min.) the other part does not ring anymore. I work on this now.
Have you registered the external DIAX with the external IP address of the
server?
BR,
Dan
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
