Re: [Bacula-users] NFS mount back ups?
Oooohh….. I just noticed… Software compression is 85.8%... That might be why…
But I don’t get why the ration is so high…
From: Kern Sibbald [mailto:k...@sibbald.com]
Sent: Friday, May 08, 2015 1:28 AM
To: Romer Ventura
Cc: 'bacula-users'
Subject: Re: [Bacula-users] NFS mount back ups?
The fstype = nfs may be restricting the directories to be backed up more than
you expect. You can probably see what is going on with an estimate listing
... command.
On 07.05.2015 22:57, Romer Ventura wrote:
Well, my file set is pretty simple:
FileSet {
Name = M2KFileSet
Include {
Options {
signature = MD5
compression = GZIP
onefs = no
fstype = nfs
}
File = /mnt/nfs/hsigux
}
}
I find it hard to believe it’s compressing 33GB of data down to 3GB.. haha
Back up level is always full for this job, if I go into restore, it appears all
files have been copied. It’s just there are so many I cant really easily notice
if anything was omitted.. I did noticed some files have different owner and
group. There are some like:
drwxrwxr-x 14 111 75
drwxrwxr-x 9 111 75
drwxr-xr-x 2 root root
drwxr-xr-x 3 root 75
drwxr-xr-x 9 113 ntp
Maybe the root mapping on NFS is not working right, but if that was the case
bacula would complain about it like it did before.
Thanks
From: John Lockard [mailto:jlock...@umich.edu]
Sent: Thursday, May 07, 2015 2:48 PM
To: Romer Ventura
Cc: bacula-users
Subject: Re: [Bacula-users] NFS mount back ups?
Compression?
Backup level (files not backed up because they haven't been changed)?
Exclusions?
Have you gone through a full list of files to be backed up and a full list of
the files which were actually backed up?
On Thu, May 7, 2015 at 1:42 PM, Romer Ventura rvent...@h-st.com
mailto:rvent...@h-st.com wrote:
Hello,
I have 2 HP-UX 11.31 and I have ERP data I need to back up on those systems.
Since there is no client for it, I decided to copy the files to a temp location
every night, and export that temp folder via NFS. I mount these exports into my
bacula server and set it up so that it backs up those mount point.
Everything seems to be working, however, the total size of the ERP data is
about 33GB, but bacula is only copying 3.2GB, I see no errors in the bacula
app, logs or the bacula server itself. There are no errors on any of the HP-UX
servers either..
Any ideas on what to do? Or detect why bacula it is stopping at 3.2GB and
marking the job as OK..?
Thanks
--
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net mailto:Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
---
John M. Lockard | U of Michigan - School of Information
Unix Sys Admin | Suite 205 | 309 Maynard Street
jlock...@umich.edu mailto:jlock...@umich.edu |Ann Arbor, MI
48104-2211
www.umich.edu/~jlockard http://www.umich.edu/%7Ejlockard | 734-936-7255
| 734-763-9677 FAX
---
- The University of Michigan will never ask you for your password -
--
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net mailto:Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
BR CLEAR=ALL
hr style=border: 1px solid #CCC;
p style=font-style:italic; font-size:8pt; font-family:verdana;
color:gray;This document and attachments may contain technical data
controlled under the U.S. International Traffic in Arms Regulations (ITAR) or
the Export Administration Regulations (EAR) and may not be exported to a
Foreign Person, either in the U.S. or abroad, without the proper authorization
by the U.S. Department of State or Department of Commerce, whichever is
applicable.
CONFIDENTIALITY NOTE: This electronic transmission, including all attachments,
is directed in confidence solely
Re: [Bacula-users] NFS mount back ups?
Yeah, I actually thought about that. So I did an estimate and it came up with:
2000 OK estimate files=49,851 bytes=23,481,423,809
Didn’t do a estimate listing till you mentioned it, here it is:
2000 OK estimate files=49,851 bytes=23,481,423,809
I cant omit the fstype = nfs, as bacula will fail since bacula checks for that.
From: Kern Sibbald [mailto:k...@sibbald.com]
Sent: Friday, May 08, 2015 1:28 AM
To: Romer Ventura
Cc: 'bacula-users'
Subject: Re: [Bacula-users] NFS mount back ups?
The fstype = nfs may be restricting the directories to be backed up more than
you expect. You can probably see what is going on with an estimate listing
... command.
On 07.05.2015 22:57, Romer Ventura wrote:
Well, my file set is pretty simple:
FileSet {
Name = M2KFileSet
Include {
Options {
signature = MD5
compression = GZIP
onefs = no
fstype = nfs
}
File = /mnt/nfs/hsigux
}
}
I find it hard to believe it’s compressing 33GB of data down to 3GB.. haha
Back up level is always full for this job, if I go into restore, it appears all
files have been copied. It’s just there are so many I cant really easily notice
if anything was omitted.. I did noticed some files have different owner and
group. There are some like:
drwxrwxr-x 14 111 75
drwxrwxr-x 9 111 75
drwxr-xr-x 2 root root
drwxr-xr-x 3 root 75
drwxr-xr-x 9 113 ntp
Maybe the root mapping on NFS is not working right, but if that was the case
bacula would complain about it like it did before.
Thanks
From: John Lockard [mailto:jlock...@umich.edu]
Sent: Thursday, May 07, 2015 2:48 PM
To: Romer Ventura
Cc: bacula-users
Subject: Re: [Bacula-users] NFS mount back ups?
Compression?
Backup level (files not backed up because they haven't been changed)?
Exclusions?
Have you gone through a full list of files to be backed up and a full list of
the files which were actually backed up?
On Thu, May 7, 2015 at 1:42 PM, Romer Ventura rvent...@h-st.com
mailto:rvent...@h-st.com wrote:
Hello,
I have 2 HP-UX 11.31 and I have ERP data I need to back up on those systems.
Since there is no client for it, I decided to copy the files to a temp location
every night, and export that temp folder via NFS. I mount these exports into my
bacula server and set it up so that it backs up those mount point.
Everything seems to be working, however, the total size of the ERP data is
about 33GB, but bacula is only copying 3.2GB, I see no errors in the bacula
app, logs or the bacula server itself. There are no errors on any of the HP-UX
servers either..
Any ideas on what to do? Or detect why bacula it is stopping at 3.2GB and
marking the job as OK..?
Thanks
--
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net mailto:Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
---
John M. Lockard | U of Michigan - School of Information
Unix Sys Admin | Suite 205 | 309 Maynard Street
jlock...@umich.edu mailto:jlock...@umich.edu |Ann Arbor, MI
48104-2211
www.umich.edu/~jlockard http://www.umich.edu/%7Ejlockard | 734-936-7255
| 734-763-9677 FAX
---
- The University of Michigan will never ask you for your password -
--
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net mailto:Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
BR CLEAR=ALL
hr style=border: 1px solid #CCC;
p style=font-style:italic; font-size:8pt; font-family:verdana;
color:gray;This document and attachments may contain technical data
controlled under the U.S. International Traffic in Arms Regulations (ITAR) or
the Export Administration Regulations (EAR) and may not be exported to a
Foreign Person, either in the U.S. or abroad, without
Re: [Bacula-users] NFS mount back ups?
Well, I did a full restore and tested random files and everything works fine.
It was the software compression.. ha..
Thanks for all the help everyone.
From: Luc Van der Veken [mailto:luc...@wimionline.com]
Sent: Friday, May 08, 2015 9:31 AM
To: 'bacula-users'
Subject: Re: [Bacula-users] NFS mount back ups?
Romer Ventura said:
I cant omit the fstype = nfs, as bacula will fail since bacula checks for
that.
[Based on version 5.x]
I think bacula will check the file system type _only_ if you specify it, and
default to “everything” when you omit it.
You can’t even use it for Windows clients.
I don’t specify ‘fstype=’ anywhere, and my backups run fine, of local disks as
well as NFS shares (that’s how I back up a NAS on which I can’t install a file
daemon).
As far as I understood it, it is optional; you can specify zero, one or more
filesystem types to include; and the main (or only) reason why it exists is so
you can avoid getting into an endless loop traversing mount points when you set
onefs = no.
From: Romer Ventura [mailto:rvent...@h-st.com]
Sent: 08 May 2015 15:47
To: 'Kern Sibbald'
Cc: 'bacula-users'
Subject: Re: [Bacula-users] NFS mount back ups?
Yeah, I actually thought about that. So I did an estimate and it came up with:
2000 OK estimate files=49,851 bytes=23,481,423,809
Didn’t do a estimate listing till you mentioned it, here it is:
2000 OK estimate files=49,851 bytes=23,481,423,809
I cant omit the fstype = nfs, as bacula will fail since bacula checks for that.
From: Kern Sibbald [mailto:k...@sibbald.com]
Sent: Friday, May 08, 2015 1:28 AM
To: Romer Ventura
Cc: 'bacula-users'
Subject: Re: [Bacula-users] NFS mount back ups?
The fstype = nfs may be restricting the directories to be backed up more than
you expect. You can probably see what is going on with an estimate listing
... command.
On 07.05.2015 22:57, Romer Ventura wrote:
Well, my file set is pretty simple:
FileSet {
Name = M2KFileSet
Include {
Options {
signature = MD5
compression = GZIP
onefs = no
fstype = nfs
}
File = /mnt/nfs/hsigux
}
}
I find it hard to believe it’s compressing 33GB of data down to 3GB.. haha
Back up level is always full for this job, if I go into restore, it appears all
files have been copied. It’s just there are so many I cant really easily notice
if anything was omitted.. I did noticed some files have different owner and
group. There are some like:
drwxrwxr-x 14 111 75
drwxrwxr-x 9 111 75
drwxr-xr-x 2 root root
drwxr-xr-x 3 root 75
drwxr-xr-x 9 113 ntp
Maybe the root mapping on NFS is not working right, but if that was the case
bacula would complain about it like it did before.
Thanks
From: John Lockard [mailto:jlock...@umich.edu]
Sent: Thursday, May 07, 2015 2:48 PM
To: Romer Ventura
Cc: bacula-users
Subject: Re: [Bacula-users] NFS mount back ups?
Compression?
Backup level (files not backed up because they haven't been changed)?
Exclusions?
Have you gone through a full list of files to be backed up and a full list of
the files which were actually backed up?
On Thu, May 7, 2015 at 1:42 PM, Romer Ventura rvent...@h-st.com
mailto:rvent...@h-st.com wrote:
Hello,
I have 2 HP-UX 11.31 and I have ERP data I need to back up on those systems.
Since there is no client for it, I decided to copy the files to a temp location
every night, and export that temp folder via NFS. I mount these exports into my
bacula server and set it up so that it backs up those mount point.
Everything seems to be working, however, the total size of the ERP data is
about 33GB, but bacula is only copying 3.2GB, I see no errors in the bacula
app, logs or the bacula server itself. There are no errors on any of the HP-UX
servers either..
Any ideas on what to do? Or detect why bacula it is stopping at 3.2GB and
marking the job as OK..?
Thanks
--
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net mailto:Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
---
John M. Lockard | U of Michigan - School of Information
Unix Sys Admin | Suite 205 | 309 Maynard Street
jlock...@umich.edu mailto:jlock...@umich.edu |Ann Arbor, MI
48104-2211
www.umich.edu/~jlockard http://www.umich.edu
[Bacula-users] NFS mount back ups?
Hello, I have 2 HP-UX 11.31 and I have ERP data I need to back up on those systems. Since there is no client for it, I decided to copy the files to a temp location every night, and export that temp folder via NFS. I mount these exports into my bacula server and set it up so that it backs up those mount point. Everything seems to be working, however, the total size of the ERP data is about 33GB, but bacula is only copying 3.2GB, I see no errors in the bacula app, logs or the bacula server itself. There are no errors on any of the HP-UX servers either.. Any ideas on what to do? Or detect why bacula it is stopping at 3.2GB and marking the job as OK..? Thanks -- One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] NFS mount back ups?
Well, my file set is pretty simple:
FileSet {
Name = M2KFileSet
Include {
Options {
signature = MD5
compression = GZIP
onefs = no
fstype = nfs
}
File = /mnt/nfs/hsigux
}
}
I find it hard to believe it’s compressing 33GB of data down to 3GB.. haha
Back up level is always full for this job, if I go into restore, it appears all
files have been copied. It’s just there are so many I cant really easily notice
if anything was omitted.. I did noticed some files have different owner and
group. There are some like:
drwxrwxr-x 14 111 75
drwxrwxr-x 9 111 75
drwxr-xr-x 2 root root
drwxr-xr-x 3 root 75
drwxr-xr-x 9 113 ntp
Maybe the root mapping on NFS is not working right, but if that was the case
bacula would complain about it like it did before.
Thanks
From: John Lockard [mailto:jlock...@umich.edu]
Sent: Thursday, May 07, 2015 2:48 PM
To: Romer Ventura
Cc: bacula-users
Subject: Re: [Bacula-users] NFS mount back ups?
Compression?
Backup level (files not backed up because they haven't been changed)?
Exclusions?
Have you gone through a full list of files to be backed up and a full list of
the files which were actually backed up?
On Thu, May 7, 2015 at 1:42 PM, Romer Ventura rvent...@h-st.com
mailto:rvent...@h-st.com wrote:
Hello,
I have 2 HP-UX 11.31 and I have ERP data I need to back up on those systems.
Since there is no client for it, I decided to copy the files to a temp location
every night, and export that temp folder via NFS. I mount these exports into my
bacula server and set it up so that it backs up those mount point.
Everything seems to be working, however, the total size of the ERP data is
about 33GB, but bacula is only copying 3.2GB, I see no errors in the bacula
app, logs or the bacula server itself. There are no errors on any of the HP-UX
servers either..
Any ideas on what to do? Or detect why bacula it is stopping at 3.2GB and
marking the job as OK..?
Thanks
--
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net mailto:Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
---
John M. Lockard | U of Michigan - School of Information
Unix Sys Admin | Suite 205 | 309 Maynard Street
jlock...@umich.edu mailto:jlock...@umich.edu |Ann Arbor, MI
48104-2211
www.umich.edu/~jlockard http://www.umich.edu/%7Ejlockard | 734-936-7255
| 734-763-9677 FAX
---
- The University of Michigan will never ask you for your password -
--
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Bacula job keeps using the same volume
Hello, One of my jobs got stuck using the same volume. I have it setup so that a new volume is created and used every time a job runs, but this one got stuck. -rw-r- 1 bacula tape 4.4G Nov 27 13:26 SERVER-H44Inc-2014-1123-1272-222 -rw-r- 1 bacula tape 1.1M Nov 27 19:18 SERVER -H44Inc-2014-1123-1272-223 -rw-r- 1 bacula tape 1.1M Nov 28 19:19 SERVER -H44Inc-2014-1123-1272-224 -rw-r- 1 bacula tape 310M Dec 1 19:20 SERVER -H44Inc-2014-1123-1272-225 -rw-r- 1 bacula tape 593M Dec 2 19:21 SERVER -H44Inc-2014-1123-1272-226 -rw-r- 1 bacula tape 315M Dec 3 19:20 SERVER -H44Inc-2014-1123-1272-227 -rw-r- 1 bacula tape 428M Dec 4 19:20 SERVER -H44Inc-2014-1123-1272-228 -rw-r- 1 bacula tape 291M Dec 5 19:20 SERVER -H44Inc-2014-1123-1272-229 -rw-r- 1 bacula tape 482M Dec 8 19:20 SERVER -H44Inc-2014-1123-1272-230 -rw-r- 1 bacula tape 332M Dec 9 19:20 SERVER -H44Inc-2014-1123-1272-231 Status dir show: Scheduled Jobs: Level Type Pri Scheduled Name Volume === IncrementalBackup10 10-Dec-14 18:33H46Job *unknown* IncrementalBackup10 10-Dec-14 18:33MimotJob *unknown* IncrementalBackup10 10-Dec-14 19:00H22Job *unknown* IncrementalBackup10 10-Dec-14 19:00T70Job *unknown* IncrementalBackup10 10-Dec-14 19:05H44Job SERVER-H44Inc-2014-1123-1272-232 Full Backup10 11-Dec-14 05:00CatalogBackup *unknown* Any ideas? Thanks. BR CLEAR=ALL hr style=border: 1px solid #CCC; p style=font-style:italic; font-size:8pt; font-family:verdana; color:gray;This document and attachments may contain technical data controlled under the U.S. International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and may not be exported to a Foreign Person, either in the U.S. or abroad, without the proper authorization by the U.S. Department of State or Department of Commerce, whichever is applicable. CONFIDENTIALITY NOTE: This electronic transmission, including all attachments, is directed in confidence solely to the person(s) to whom it is addressed, or an authorized recipient, and may not otherwise be distributed, copied or disclosed. The contents of the transmission may also be subject to intellectual property rights and such rights are expressly claimed and are not waived. If you have received this transmission in error, please notify the sender immediately by return electronic transmission and then immediately delete this transmission, including all attachments, without copying, distributing or disclosing same. The recipient should check this e-mail and any attachments for the presence of viruses. Houston Sigma Technologies L.P. accepts no liability for any damage caused by any virus transmitted by this e-mail./p -- Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=164703151iu=/4140/ostg.clktrk___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Bacula job keeps using the same volume
From: Heitor Faria [mailto:hei...@bacula.com.br]
Sent: Wednesday, December 10, 2014 12:01 PM
To: Romer Ventura
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Bacula job keeps using the same volume
One of my jobs got stuck using the same volume. I have it setup so that a new
volume is created and used every time a job runs, but this one got stuck.
-rw-r- 1 bacula tape 4.4G Nov 27 13:26 SERVER-H44Inc-2014-1123-1272-222
-rw-r- 1 bacula tape 1.1M Nov 27 19:18 SERVER -H44Inc-2014-1123-1272-223
-rw-r- 1 bacula tape 1.1M Nov 28 19:19 SERVER -H44Inc-2014-1123-1272-224
-rw-r- 1 bacula tape 310M Dec 1 19:20 SERVER -H44Inc-2014-1123-1272-225
-rw-r- 1 bacula tape 593M Dec 2 19:21 SERVER -H44Inc-2014-1123-1272-226
-rw-r- 1 bacula tape 315M Dec 3 19:20 SERVER -H44Inc-2014-1123-1272-227
-rw-r- 1 bacula tape 428M Dec 4 19:20 SERVER -H44Inc-2014-1123-1272-228
-rw-r- 1 bacula tape 291M Dec 5 19:20 SERVER -H44Inc-2014-1123-1272-229
-rw-r- 1 bacula tape 482M Dec 8 19:20 SERVER -H44Inc-2014-1123-1272-230
-rw-r- 1 bacula tape 332M Dec 9 19:20 SERVER -H44Inc-2014-1123-1272-231
_
Hey Mr. Romer: could you please post the output of llist pool=pool_in_use
bconsole command?
Regards,
Heitor Medrado de Faria - LPIC-III | ITIL-F
tel:%2B55%2061%202021-8260 +55 61 2021-8260 | tel:%2B55%2061%208268-4220
8268-4220
Site: http://www.bacula.com.br/ www.bacula.com.br | Facebook:
http://www.facebook.com/heitor.faria heitor.faria | Gtalk:
mailto:heitorfa...@gmail.com heitorfa...@gmail.com
Sure thing, here it is. Everything started to happen like this when a running
job for this client and pool got stuck and lost connection to the client. I
restarted the client and bacula, but this volume never did whst was originally
doing.
*llist pool=H44Inc
PoolId: 10
Name: H44Inc
NumVols: 241
MaxVols: 0
UseOnce: 1
UseCatalog: 1
AcceptAnyVolume: 0
VolRetention: 31,536,000
VolUseDuration: 0
MaxVolJobs: 1
MaxVolBytes: 21,474,836,480
AutoPrune: 1
Recycle: 0
PoolType: Backup
LabelFormat:
${Client}-${Pool}-${Year}-${Month:p/2/0/r}${Day:p/2/0/r}-${JobId}-${NumVols+}
Enabled: 1
ScratchPoolId: 0
RecyclePoolId: 0
LabelType: 0
Thanks.
BR CLEAR=ALL
hr style=border: 1px solid #CCC;
p style=font-style:italic; font-size:8pt; font-family:verdana;
color:gray;This document and attachments may contain technical data
controlled under the U.S. International Traffic in Arms Regulations (ITAR) or
the Export Administration Regulations (EAR) and may not be exported to a
Foreign Person, either in the U.S. or abroad, without the proper authorization
by the U.S. Department of State or Department of Commerce, whichever is
applicable.
CONFIDENTIALITY NOTE: This electronic transmission, including all attachments,
is directed in confidence solely to the person(s) to whom it is addressed, or
an authorized recipient, and may not otherwise be distributed, copied or
disclosed. The contents of the transmission may also be subject to intellectual
property rights and such rights are expressly claimed and are not waived. If
you have received this transmission in error, please notify the sender
immediately by return electronic transmission and then immediately delete this
transmission, including all attachments, without copying, distributing or
disclosing same. The recipient should check this e-mail and any attachments
for the presence of viruses. Houston Sigma Technologies L.P. accepts no
liability for any damage caused by any virus transmitted by this e-mail./p
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=164703151iu=/4140/ostg.clktrk___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Ensuring backups are good
Hello, I am trying to find an automated way to ensure my bacula backup files are good. I read the Verify type, but that doesn't seem to work if my files are being updated constantly, as per my understanding based on the docs. All I would like to do is to know that my data still good and that it could be restored at any point. Thanks for any info. BR CLEAR=ALL hr style=border: 1px solid #CCC; p style=font-style:italic; font-size:8pt; font-family:verdana; color:gray;This document and attachments may contain technical data controlled under the U.S. International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and may not be exported to a Foreign Person, either in the U.S. or abroad, without the proper authorization by the U.S. Department of State or Department of Commerce, whichever is applicable. CONFIDENTIALITY NOTE: This electronic transmission, including all attachments, is directed in confidence solely to the person(s) to whom it is addressed, or an authorized recipient, and may not otherwise be distributed, copied or disclosed. The contents of the transmission may also be subject to intellectual property rights and such rights are expressly claimed and are not waived. If you have received this transmission in error, please notify the sender immediately by return electronic transmission and then immediately delete this transmission, including all attachments, without copying, distributing or disclosing same. The recipient should check this e-mail and any attachments for the presence of viruses. Houston Sigma Technologies L.P. accepts no liability for any damage caused by any virus transmitted by this e-mail./p -- Learn Graph Databases - Download FREE O'Reilly Book Graph Databases is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/NeoTech___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Restoring pruned files
I am trying to restore some files from pruned volumes and I am having a bit of difficulties. I did run bscan like: bscan -b h34.bsr -h localhost -P password -v -s -m -c bacula-sd.conf H23- DataStore-full Bscan finished normally and I went into bconsole, there I started the restore and it showed this: Could it be that Bacula noticed that the files were old enough to be pruned and so just pruned them again as soon as the bscan had finished? Try pushing out the prune date and doing the bscan again. James Ok, well it ended up being that since I am using a somewhat older version, the bscan bug still present where the PrunedFiles in the DB does not update. After manually updating the DB field, I was able to restore my files. Thanks BR CLEAR=ALL hr style=border: 1px solid #CCC; p style=font-style:italic; font-size:8pt; font-family:verdana; color:gray;This document and attachments may contain technical data controlled under the U.S. International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and may not be exported to a Foreign Person, either in the U.S. or abroad, without the proper authorization by the U.S. Department of State or Department of Commerce, whichever is applicable. CONFIDENTIALITY NOTE: This electronic transmission, including all attachments, is directed in confidence solely to the person(s) to whom it is addressed, or an authorized recipient, and may not otherwise be distributed, copied or disclosed. The contents of the transmission may also be subject to intellectual property rights and such rights are expressly claimed and are not waived. If you have received this transmission in error, please notify the sender immediately by return electronic transmission and then immediately delete this transmission, including all attachments, without copying, distributing or disclosing same. The recipient should check this e-mail and any attachments for the presence of viruses. Houston Sigma Technologies L.P. accepts no liability for any damage caused by any virus transmitted by this e-mail./p -- Master HTML5, CSS3, ASP.NET, MVC, AJAX, Knockout.js, Web API and much more. Get web development skills now with LearnDevNow - 350+ hours of step-by-step video tutorials by Microsoft MVPs and experts. SALE $99.99 this month only -- learn more at: http://p.sf.net/sfu/learnmore_122812 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Restoring pruned files
Hello, I am trying to restore some files from pruned volumes and I am having a bit of difficulties. I did run bscan like: bscan -b h34.bsr -h localhost -P password -v -s -m -c bacula-sd.conf H23-DataStore-full Bscan finished normally and I went into bconsole, there I started the restore and it showed this: Automatically selected FileSet: H34-FileServ +---+---+--+-+-+ + | JobId | Level | JobFiles | JobBytes| StartTime | VolumeName | +---+---+--+-+-+ + | 1,059 | F | 932,326 | 339,547,819,982 | 2012-08-05 08:23:14 | H34-Full-0001 | | 1,059 | F | 932,326 | 339,547,819,982 | 2012-08-05 08:23:14 | H34-Full-0004 | | 1,476 | D | 56,072 | 22,764,954,757 | 2012-12-19 23:29:47 | H34-Diff-0048 | | 1,480 | I | 13,755 | 5,235,302,531 | 2012-12-25 07:10:53 | H34-Incre-0039 | | 1,483 | I | 13,860 | 5,648,317,371 | 2012-12-30 14:31:32 | H34-Incre-0042 | +---+---+--+-+-+ + But then it complained that no files were found. When I do list volume I see that all the above volumes list: 0 VolFiles +-+---+---+-+-+- -+--+-+--+---+---+-- ---+ | MediaId | VolumeName| VolStatus | Enabled | VolBytes| VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten | +-+---+---+-+-+- -+--+-+--+---+---+-- ---+ | 1 | H34-Full-0001 | Full | 1 | 246,822,772,455 |0 |2,592,000 | 1 |0 | 0 | File | 2012-08-08 13:33:32 | | 4 | H34-Full-0004 | Used | 1 | 92,807,279,173 |0 |2,592,000 | 1 |0 | 0 | File | 2012-08-08 14:36:19 | +-+---+---+-+-+- -+--+-+--+---+---+-- ---+ Pool: FileServPool-Diff-tape +-+---+---+-+---+--+ --+-+--+---+---+ -+ | MediaId | VolumeName| VolStatus | Enabled | VolBytes | VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten | +-+---+---+-+---+--+ --+-+--+---+---+ -+ | 10 | H34-Diff-0010 | Used | 1 | 5,584,694,166 |1 | 2,592,000 | 1 |0 | 0 | File | 2012-09-24 15:59:58 | | 29 | H34-Diff-0029 | Error | 1 | 1 |0 | 2,592,000 | 1 |0 | 0 | File | 2011-12-17 20:49:03 | | 48 | H34-Diff-0048 | Used | 1 | 6,070,658,143 |0 | 2,592,000 | 1 |0 | 0 | File | 2012-06-20 09:46:16 | Any suggestions?? Thanks BR CLEAR=ALL hr style=border: 1px solid #CCC; p style=font-style:italic; font-size:8pt; font-family:verdana; color:gray;This document and attachments may contain technical data controlled under the U.S. International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and may not be exported to a Foreign Person, either in the U.S. or abroad, without the proper authorization by the U.S. Department of State or Department of Commerce, whichever is applicable. CONFIDENTIALITY NOTE: This electronic transmission, including all attachments, is directed in confidence solely to the person(s) to whom it is addressed, or an authorized recipient, and may not otherwise be distributed, copied or disclosed. The contents of the transmission may also be subject to intellectual property rights and such rights are expressly claimed and are not waived. If you have received this transmission in error, please notify the sender immediately by return electronic transmission and then immediately delete this transmission, including all attachments, without copying, distributing or disclosing same. The recipient should check this e-mail and any attachments for the presence of viruses. Houston Sigma Technologies L.P. accepts no liability for any damage caused by any virus transmitted by this e-mail./p -- Master Visual Studio, SharePoint, SQL, ASP.NET, C# 2012, HTML5, CSS, MVC, Windows 8 Apps, JavaScript and much more. Keep your skills current with LearnDevNow - 3,200 step-by-step video tutorials by Microsoft MVPs and experts. ON SALE this month only -- learn more at:
[Bacula-users] backing up to disk - vtapes
Hello,
I am backing up to disk and I am having some issues with a particular pool.
Mail-diff-pool:
Pool {
Name = MailPool-Diff-tape
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 1 months
Maximum Volume Jobs = 1
Label Format = H22-Diff-
Maximum Volumes = 3
Storage = H23-FileStore-diff
}
The idea is to do a differential backup every weekend where the full backup
doesn't run, this should be 3 weekends. Each of those weekends should use 1
tape.
The problem I am having is that it seems like the first time the
differential backup ran, it created file sizes (for the vtapes) of 4.2GB,
4.8GB and 22GB. Now that the differential backup is to run again, it used
ALL 3 vtapes for 1 job. In the job log I can see each tapes being purged and
recycled in order to be used, but then it just stops once it fills up the
last tape.
Are the file based backups supposed to increase and decrease the file size
for the vtape depending on what's used for a particular run or once the file
size is set there is no resize for them??
Thanks for any info.
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] backing up to disk - vtapes
Are the file based backups supposed to increase and decrease the file size for the vtape depending on what's used for a particular run or once the file size is set there is no resize for them?? They are supposed to increase up to whatever limit were set on them when the volume was created (or if you issued the bconsole commands to change the volume's maximum size). That is unless you are using use volume once or some other usage limit. Volumes will only decrease size on recycle if you have the truncate on purge enabled. John Well, the volumes were purged and recycled before they were used on May-19. But for some reason the volume did not grow in size to accommodate the new increased size of this differential run. For this pool I have not set any usage limit other than Maximum Volume Jobs = 1 as I want each of the 3 differential runs to be on its own vtape. Pool: MailPool-Diff-tape +-+---+---+-++-- +--+-+--+---+---+--- --+ | MediaId | VolumeName| VolStatus | Enabled | VolBytes | VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten | +-+---+---+-++-- +--+-+--+---+---+--- --+ | 11 | H22-Diff-0011 | Full | 1 | 4,836,464,737 |1 |2,592,000 | 1 |0 | 0 | File | 2012-05-19 14:18:40 | | 30 | H22-Diff-0030 | Full | 1 | 4,297,466,908 |1 |2,592,000 | 1 |0 | 0 | File | 2012-05-19 14:25:44 | | 49 | H22-Diff-0049 | Full | 1 | 22,872,857,850 |5 |2,592,000 | 1 |0 | 0 | File | 2012-05-19 14:11:44 | +-+---+---+-++-- +--+-+--+---+---+--- --+ As shown above, it started with mediaId 49 and it used all of it without ever increasing its size. And it did the same for the other 2 vtapes. Do I need to set any max size in order for the vtape to be able to increase its size?? Thanks -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Restoring data after retention policy pruned volumes
-Original Message- From: Martin Simmons [mailto:mar...@lispworks.com] Sent: Monday, March 26, 2012 4:53 AM To: bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] Restoring data after retention policy pruned volumes On Fri, 23 Mar 2012 14:46:56 -0500, Romer Ventura said: -Original Message- From: Martin Simmons [mailto:mar...@lispworks.com] Sent: Friday, March 23, 2012 2:38 PM To: bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] Restoring data after retention policy pruned volumes On Fri, 23 Mar 2012 14:12:24 -0500, Romer Ventura said: -Original Message- From: Joseph L. Casale [mailto:jcas...@activenetwerx.com] Sent: Friday, March 23, 2012 11:42 AM To: bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] Restoring data after retention policy pruned volumes I need to restore some older files, the problem is that the retention policy has already pruned the files. /snip How can I restore my files..? See the second paragraph in the bscan manual. jlc -- -- -- I had edited the config and set Autoprune = no, however, I failed to notice the Volume Retention parameter, I just uncommented it and gonna redo the scan and try it again. Thanks. -- -- -- Well still didn't work. I did another bscan, this time I made sure that the Job, storage, pools in the dir.conf had Autoprune = no and no retention value, after bscan completed its task, I went to the console and tried to do a restore; however, it keeps saying that there are no files found. Any ideas? Config is below. Which version of Bacula? There was a bug in some old versions that would cause this. __Martin -- -- -- The version I am using is: Version: 5.0.3 Would this be the one affected by it? Yes, I think it is broken in 5.0.3. Check Job.PurgedFiles in the catalog for the bscanned jobs. If it is 1 then set it to 0 and restore should work. __Martin -- Thanks. After updating the PurgedFiles from 1 to 0, I was able to do the restore as normal. Thanks again. -- This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Restoring data after retention policy pruned volumes
Hello, I need to restore some older files, the problem is that the retention policy has already pruned the files. However, the volumes have not been over written. I did a bscan with -m and -s options and when I went back to the bconsole and did a restore I selected the most recent, option 5, however, I keep getting: For one or more of the JobIds selected, no files were found, so file selection is not possible. Most likely your retention policy pruned the files. How can I restore my files..? Thanks -- This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Restoring data after retention policy pruned volumes
-Original Message- From: Joseph L. Casale [mailto:jcas...@activenetwerx.com] Sent: Friday, March 23, 2012 11:42 AM To: bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] Restoring data after retention policy pruned volumes I need to restore some older files, the problem is that the retention policy has already pruned the files. /snip How can I restore my files..? See the second paragraph in the bscan manual. jlc -- I had edited the config and set Autoprune = no, however, I failed to notice the Volume Retention parameter, I just uncommented it and gonna redo the scan and try it again. Thanks. -- This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Restoring data after retention policy pruned volumes
-Original Message- From: Martin Simmons [mailto:mar...@lispworks.com] Sent: Friday, March 23, 2012 2:38 PM To: bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] Restoring data after retention policy pruned volumes On Fri, 23 Mar 2012 14:12:24 -0500, Romer Ventura said: -Original Message- From: Joseph L. Casale [mailto:jcas...@activenetwerx.com] Sent: Friday, March 23, 2012 11:42 AM To: bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] Restoring data after retention policy pruned volumes I need to restore some older files, the problem is that the retention policy has already pruned the files. /snip How can I restore my files..? See the second paragraph in the bscan manual. jlc -- -- -- I had edited the config and set Autoprune = no, however, I failed to notice the Volume Retention parameter, I just uncommented it and gonna redo the scan and try it again. Thanks. -- -- -- Well still didn't work. I did another bscan, this time I made sure that the Job, storage, pools in the dir.conf had Autoprune = no and no retention value, after bscan completed its task, I went to the console and tried to do a restore; however, it keeps saying that there are no files found. Any ideas? Config is below. Which version of Bacula? There was a bug in some old versions that would cause this. __Martin -- The version I am using is: Version: 5.0.3 Would this be the one affected by it? Thanks -- This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] retention
Hello,
I wanna accomplish the following:
1.- Full back up the first saunday of every month, incremental back up Mon
through Fri and differential backup every Sun except for the first Sun of
the month. So far I have this:
Schedule {
Name = WeeklyCycle
Run = Level=Full 1st sun at 18:00
Run = Level=Differential 2nd-5th sun at 18:00
Run = Level=Incremental mon-fri at 20:00
}
And jobDefs look like:
JobDefs {
Name = H22-MailServ-def
Type = Backup
Level = Full
Schedule = WeeklyCycle
Messages = Standard
Pool = MailPool-Full-tape
Full Backup Pool = MailPool-Full-tape
Differential Backup Pool = MailPool-Diff-tape
Incremental Backup Pool = MailPool-Incre-tape
Write Bootstrap = /var/lib/bacula/%c.bsr
Priority = 10
}
2.- I have 4 sets of 7 tapes, that would give me 4 months of back ups.
Actually 3 since the last one would have to be reused. Basically I want each
set to be used every month. So far I have this:
Pool {
Name = MailPool-Full-tape
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 3 months
Maximum Volume Jobs = 1
Maximum Volumes = 4
Storage = SLDLTv4
}
Pool {
Name = MailPool-Diff-tape
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 3 months
Maximum Volumes = 4
Storage = SLDLTv4
}
Pool {
Name = MailPool-Incre-tape
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 3 months
Maximum Volumes = 4
Storage = SLDLTv4
}
Do this look about right.?
Thanks
Romer Ventura
--
Enable your software for Intel(R) Active Management Technology to meet the
growing manageability and security demands of your customers. Businesses
are taking advantage of Intel(R) vPro (TM) technology - will your software
be a part of the solution? Download the Intel(R) Manageability Checker
today! http://p.sf.net/sfu/intel-dev2devmar___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Restoring to a folder?
Hello,
I was trying to do a restore and after I marked all the folder/files I
needed the process started and successfully finished, however, when I go to
the folder which where the files are suppoused to be, they are not. The
folder is empty. The client from where Bacula takes this data has not
changed so I know it didn't restore it to the remote client.
Any ideas?
Here is some info:
Job {
Name = RestoreFiles
Type = Restore
Client=housigma25-fd
FileSet=Full Set
Storage = SLDLTv4
Pool = Default
Messages = Standard
Where = /srv/staging/restores
}
FileSet {
Name = Full Set
Include {
Options {
signature = MD5
}
File = /usr/sbin
}
Exclude {
File = /var/lib/bacula
File = /nonexistant/path/to/file/archive/dir
File = /proc
File = /tmp
File = /.journal
File = /.fsck
}
}
LOG FILE:
08-Jan 17:01 housigma25-dir JobId 177: Start Restore Job
RestoreFiles.2011-01-08_17.01.42_05
08-Jan 17:01 housigma25-dir JobId 177: Using Device DLTv4
08-Jan 17:01 housigma25-sd JobId 177: 3307 Issuing autochanger unload slot
7, drive 0 command.
08-Jan 17:02 housigma25-sd JobId 177: 3304 Issuing autochanger load slot 6,
drive 0 command.
08-Jan 17:05 housigma25-sd JobId 177: 3305 Autochanger load slot 6, drive
0, status is OK.
08-Jan 17:05 housigma25-sd JobId 177: Ready to read from volume CNH913 on
device DLTv4 (/dev/nst0).
08-Jan 17:05 housigma25-sd JobId 177: Forward spacing Volume CNH913 to
file:block 90:0.
08-Jan 17:32 housigma25-sd JobId 177: End of Volume at file 107 on device
DLTv4 (/dev/nst0), Volume CNH913
08-Jan 17:34 housigma25-sd JobId 177: 3307 Issuing autochanger unload slot
6, drive 0 command.
08-Jan 17:35 housigma25-sd JobId 177: 3304 Issuing autochanger load slot 5,
drive 0 command.
08-Jan 17:37 housigma25-sd JobId 177: 3305 Autochanger load slot 5, drive
0, status is OK.
08-Jan 17:37 housigma25-sd JobId 177: Ready to read from volume CNH914 on
device DLTv4 (/dev/nst0).
08-Jan 17:37 housigma25-sd JobId 177: Forward spacing Volume CNH914 to
file:block 121:0.
08-Jan 17:40 housigma25-sd JobId 177: End of Volume at file 122 on device
DLTv4 (/dev/nst0), Volume CNH914
08-Jan 17:41 housigma25-sd JobId 177: 3307 Issuing autochanger unload slot
5, drive 0 command.
08-Jan 17:42 housigma25-sd JobId 177: 3304 Issuing autochanger load slot 7,
drive 0 command.
08-Jan 17:45 housigma25-sd JobId 177: 3305 Autochanger load slot 7, drive
0, status is OK.
08-Jan 17:45 housigma25-sd JobId 177: Ready to read from volume CNH909 on
device DLTv4 (/dev/nst0).
08-Jan 17:45 housigma25-sd JobId 177: Forward spacing Volume CNH909 to
file:block 52:0.
08-Jan 17:48 housigma25-sd JobId 177: End of Volume at file 52 on device
DLTv4 (/dev/nst0), Volume CNH909
08-Jan 17:48 housigma25-sd JobId 177: End of all volumes.
08-Jan 17:48 housigma25-dir JobId 177: Bacula housigma25-dir 5.0.2
(28Apr10): 08-Jan-2011 17:48:03
Build OS: i486-pc-linux-gnu debian 5.0.4
JobId: 177
Job:RestoreFiles.2011-01-08_17.01.42_05
Restore Client: housigma34-fd
Start time: 08-Jan-2011 17:01:44
End time: 08-Jan-2011 17:48:03
Files Expected: 47,545
Files Restored: 47,545
Bytes Restored: 13,386,304,625
Rate: 4817.0 KB/s
FD Errors: 0
FD termination status: OK
SD termination status: OK
Termination:Restore OK
I know that it didn't restore it to the remote client because the folder on
the server is 12.5GB and has 45,547 files, which is less that the supposed
restore.
Any ideas?
Thanks
Romer Ventura
--
Gaining the trust of online customers is vital for the success of any company
that requires sensitive data to be transmitted over the Web. Learn how to
best implement a security strategy that keeps consumers' information secure
and instills the confidence they need to proceed with transactions.
http://p.sf.net/sfu/oracle-sfdevnl ___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Restoring to a folder?
Housigma34-fd is a Windows server so there is no /srv/staging/restores
In addition to that, the restore job has: client= housigma25-fd which is a
debian server and also the localhost.
Also, the available space for both server has not changed so if the restore
happened somewhere, I would notice 13GB less than reported.
Thanks
Romer Ventura
-Original Message-
From: Dan Langille [mailto:d...@langille.org]
Sent: Monday, January 10, 2011 10:02 AM
To: Romer Ventura
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Restoring to a folder?
On 1/10/2011 10:21 AM, Romer Ventura wrote:
Hello,
I was trying to do a restore and after I marked all the folder/files I
needed the process started and successfully finished, however, when I
go to the folder which where the files are suppoused to be, they are not.
The folder is empty. The client from where Bacula takes this data has
not changed so I know it didn't restore it to the remote client.
Any ideas?
Here is some info:
Job {
Name = RestoreFiles
Type = Restore
Client=housigma25-fd
FileSet=Full Set
Storage = SLDLTv4
Pool = Default
Messages = Standard
Where = /srv/staging/restores
}
FileSet {
Name = Full Set
Include {
Options {
signature = MD5
}
File = /usr/sbin
}
Exclude {
File = /var/lib/bacula
File = /nonexistant/path/to/file/archive/dir
File = /proc
File = /tmp
File = /.journal
File = /.fsck
}
}
LOG FILE:
08-Jan 17:01 housigma25-dir JobId 177: Start Restore Job
RestoreFiles.2011-01-08_17.01.42_05
08-Jan 17:01 housigma25-dir JobId 177: Using Device DLTv4
08-Jan 17:01 housigma25-sd JobId 177: 3307 Issuing autochanger unload
slot 7, drive 0 command.
08-Jan 17:02 housigma25-sd JobId 177: 3304 Issuing autochanger load
slot 6, drive 0 command.
08-Jan 17:05 housigma25-sd JobId 177: 3305 Autochanger load slot 6,
drive 0, status is OK.
08-Jan 17:05 housigma25-sd JobId 177: Ready to read from volume CNH913
on device DLTv4 (/dev/nst0).
08-Jan 17:05 housigma25-sd JobId 177: Forward spacing Volume CNH913
to file:block 90:0.
08-Jan 17:32 housigma25-sd JobId 177: End of Volume at file 107 on
device DLTv4 (/dev/nst0), Volume CNH913
08-Jan 17:34 housigma25-sd JobId 177: 3307 Issuing autochanger unload
slot 6, drive 0 command.
08-Jan 17:35 housigma25-sd JobId 177: 3304 Issuing autochanger load
slot 5, drive 0 command.
08-Jan 17:37 housigma25-sd JobId 177: 3305 Autochanger load slot 5,
drive 0, status is OK.
08-Jan 17:37 housigma25-sd JobId 177: Ready to read from volume CNH914
on device DLTv4 (/dev/nst0).
08-Jan 17:37 housigma25-sd JobId 177: Forward spacing Volume CNH914
to file:block 121:0.
08-Jan 17:40 housigma25-sd JobId 177: End of Volume at file 122 on
device DLTv4 (/dev/nst0), Volume CNH914
08-Jan 17:41 housigma25-sd JobId 177: 3307 Issuing autochanger unload
slot 5, drive 0 command.
08-Jan 17:42 housigma25-sd JobId 177: 3304 Issuing autochanger load
slot 7, drive 0 command.
08-Jan 17:45 housigma25-sd JobId 177: 3305 Autochanger load slot 7,
drive 0, status is OK.
08-Jan 17:45 housigma25-sd JobId 177: Ready to read from volume CNH909
on device DLTv4 (/dev/nst0).
08-Jan 17:45 housigma25-sd JobId 177: Forward spacing Volume CNH909
to file:block 52:0.
08-Jan 17:48 housigma25-sd JobId 177: End of Volume at file 52 on
device DLTv4 (/dev/nst0), Volume CNH909
08-Jan 17:48 housigma25-sd JobId 177: End of all volumes.
08-Jan 17:48 housigma25-dir JobId 177: Bacula housigma25-dir 5.0.2
(28Apr10): 08-Jan-2011 17:48:03
Build OS: i486-pc-linux-gnu debian 5.0.4
JobId: 177
Job: RestoreFiles.2011-01-08_17.01.42_05
Restore Client: housigma34-fd
Start time: 08-Jan-2011 17:01:44
End time: 08-Jan-2011 17:48:03
Files Expected: 47,545
Files Restored: 47,545
Bytes Restored: 13,386,304,625
Rate: 4817.0 KB/s
FD Errors: 0
FD termination status: OK
SD termination status: OK
Termination: Restore OK
I know that it didn't restore it to the remote client because the
folder on the server is 12.5GB and has 45,547 files, which is less
that the supposed restore.
Any ideas?
Have you looked in /srv/staging/restores on housigma34-fd?
--
Dan Langille - http://langille.org/
--
Gaining the trust of online customers is vital for the success of any company
that requires sensitive data to be transmitted over the Web. Learn how to
best implement a security strategy that keeps consumers' information secure
and instills the confidence they need to proceed with transactions.
http://p.sf.net/sfu/oracle-sfdevnl
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Restoring to a folder?
Thanks
Romer Ventura
-Original Message-
From: Dan Langille [mailto:d...@langille.org]
Sent: Monday, January 10, 2011 11:32 AM
To: Romer Ventura
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Restoring to a folder?
On 1/10/2011 10:54 AM, Romer Ventura wrote:
-Original Message-
From: Dan Langille [mailto:d...@langille.org]
Sent: Monday, January 10, 2011 10:02 AM
To: Romer Ventura
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Restoring to a folder?
On 1/10/2011 10:21 AM, Romer Ventura wrote:
Hello,
I was trying to do a restore and after I marked all the folder/files
I needed the process started and successfully finished, however, when
I go to the folder which where the files are suppoused to be, they are
not.
The folder is empty. The client from where Bacula takes this data has
not changed so I know it didn't restore it to the remote client.
Any ideas?
Here is some info:
Job {
Name = RestoreFiles
Type = Restore
Client=housigma25-fd
FileSet=Full Set
Storage = SLDLTv4
Pool = Default
Messages = Standard
Where = /srv/staging/restores
}
FileSet {
Name = Full Set
Include {
Options {
signature = MD5
}
File = /usr/sbin
}
Exclude {
File = /var/lib/bacula
File = /nonexistant/path/to/file/archive/dir
File = /proc
File = /tmp
File = /.journal
File = /.fsck
}
}
LOG FILE:
08-Jan 17:01 housigma25-dir JobId 177: Start Restore Job
RestoreFiles.2011-01-08_17.01.42_05
08-Jan 17:01 housigma25-dir JobId 177: Using Device DLTv4
08-Jan 17:01 housigma25-sd JobId 177: 3307 Issuing autochanger
unload slot 7, drive 0 command.
08-Jan 17:02 housigma25-sd JobId 177: 3304 Issuing autochanger load
slot 6, drive 0 command.
08-Jan 17:05 housigma25-sd JobId 177: 3305 Autochanger load slot 6,
drive 0, status is OK.
08-Jan 17:05 housigma25-sd JobId 177: Ready to read from volume CNH913
on device DLTv4 (/dev/nst0).
08-Jan 17:05 housigma25-sd JobId 177: Forward spacing Volume CNH913
to file:block 90:0.
08-Jan 17:32 housigma25-sd JobId 177: End of Volume at file 107 on
device DLTv4 (/dev/nst0), Volume CNH913
08-Jan 17:34 housigma25-sd JobId 177: 3307 Issuing autochanger
unload slot 6, drive 0 command.
08-Jan 17:35 housigma25-sd JobId 177: 3304 Issuing autochanger load
slot 5, drive 0 command.
08-Jan 17:37 housigma25-sd JobId 177: 3305 Autochanger load slot 5,
drive 0, status is OK.
08-Jan 17:37 housigma25-sd JobId 177: Ready to read from volume CNH914
on device DLTv4 (/dev/nst0).
08-Jan 17:37 housigma25-sd JobId 177: Forward spacing Volume CNH914
to file:block 121:0.
08-Jan 17:40 housigma25-sd JobId 177: End of Volume at file 122 on
device DLTv4 (/dev/nst0), Volume CNH914
08-Jan 17:41 housigma25-sd JobId 177: 3307 Issuing autochanger
unload slot 5, drive 0 command.
08-Jan 17:42 housigma25-sd JobId 177: 3304 Issuing autochanger load
slot 7, drive 0 command.
08-Jan 17:45 housigma25-sd JobId 177: 3305 Autochanger load slot 7,
drive 0, status is OK.
08-Jan 17:45 housigma25-sd JobId 177: Ready to read from volume CNH909
on device DLTv4 (/dev/nst0).
08-Jan 17:45 housigma25-sd JobId 177: Forward spacing Volume CNH909
to file:block 52:0.
08-Jan 17:48 housigma25-sd JobId 177: End of Volume at file 52 on
device DLTv4 (/dev/nst0), Volume CNH909
08-Jan 17:48 housigma25-sd JobId 177: End of all volumes.
08-Jan 17:48 housigma25-dir JobId 177: Bacula housigma25-dir 5.0.2
(28Apr10): 08-Jan-2011 17:48:03
Build OS: i486-pc-linux-gnu debian 5.0.4
JobId: 177
Job: RestoreFiles.2011-01-08_17.01.42_05
Restore Client: housigma34-fd
Start time: 08-Jan-2011 17:01:44
End time: 08-Jan-2011 17:48:03
Files Expected: 47,545
Files Restored: 47,545
Bytes Restored: 13,386,304,625
Rate: 4817.0 KB/s
FD Errors: 0
FD termination status: OK
SD termination status: OK
Termination: Restore OK
I know that it didn't restore it to the remote client because the
folder on the server is 12.5GB and has 45,547 files, which is less
that the supposed restore.
Any ideas?
Have you looked in /srv/staging/restores on housigma34-fd?
If you top post, it makes it very difficult to follow the story... :)
Housigma34-fd is a Windows server so there is no /srv/staging/restores
Well, that is where the job is trying to restore. Look at the WHERE field
listed above.
In addition to that, the restore job has: client= housigma25-fd
which is a
debian server and also the localhost.
Look at restore client in the output above. It is not restoring where where
you think it is.
Also, the available space for both server has not changed so if the
restore happened somewhere, I would notice 13GB less than reported.
When you are running the restore job, you probably want to mod the job (as
opposed to y/n when prompted). You probably want to change the restore
client and the WHERE field.
--
Dan Langille - http://langille.org/
Sorry, Outlook
Re: [Bacula-users] Ensuring Bacula uses the new tapes
I did forget to mention that all my tapes are labeled using label
barcode.
Thanks
--
Romer Ventura
On Oct 28, 2010, at 8:27 AM, Bill Arlofski wrote:
On 10/27/10 12:23, Romer Ventura wrote:
Hello,
Recently i've been having a lot of problems when replacing tapes.
For example: i put in 8 tapes into scratch pool, then each job pulls
tapes from there into their respective pools, then when the month
goes
by and i replace the tapes with 8 new tapes, bacula still wants to
use
the tapes i removed even when i do update slots, and indicate
Autochanger = yes on the config.
So what can i do to ensure that when i replace the tapes, the new
tapes are actually used instead of getting the error manual mount
might
be required.
Hi Romer (OOPS! I wrote a whole reply before noticing that you have
run the
update slots command) I'll leave my original reply below this one,
because it
may help someone else with a similar issue, but I suspect your
problem is
that you are not labeling your tapes by their barcodes.
If your changer supports barcodes, you need to use the label
barcodes
command in which case Bacula will ask a couple question (which pool
etc) and
will then cycle each tape into the drive, label it by its barcode
and put it
back into its slot in the changer.
You can not label them with human friendly names, since Bacula will
query the
changer for the barcodes of the tapes in the slots and the changer
does not
know about the human readable labels that may have been manually
written to
the tapes.
BTW, you can do a list media to see what tapes bacula thinks are in
which
slots. Look at the Slot and In Changer columns to confirm that
Bacula
knows where your tapes are.
Hope this helps.
--
Bill Arlofski
Reverse Polarity, LLC
--[original reply when I thought your question was differnt :) ]--
The command you are looking for is update slots
As long as your tapes have bar codes on them, and they have been
labeled with
the label barcodes command, the update slots command will update
the media
database so that bacula knows which tape is currently in the
changer and in
which slot each tape resides.
What I do is create an Update Slots job that is configured to run
at the
same time as my nightly backups but with a higher priority so it
always runs
first. This way I never really have to remember to manually run
the update
slots command unless I need to run a restore or backup job manually
after
media replacement, and before the nightly jobs run.
The Update Slots job def looks like this:
--[snip]--
#
# # Update Slots Job
# #
Job {
Name = UpDateSlots
Client = None
Type = Admin
FileSet = None
Storage = c0
Schedule = WeeklyToOffsiteDisk
Messages = Standard
Priority = 8
SpoolData = no
Pool = Default
RunScript {
RunsWhen = Before
RunsOnClient = no
Fail Job On Error = no
Command = /usr/local/sbin/runbefore-updateslots.sh
}
}
--[snip]--
and /usr/local/sbin/runbefore-updateslots.sh looks like this:
--[snip]--
#!/bin/bash
#
BC=/usr/sbin/bconsole
CONF=/etc/bacula/include/bconsole-SITENAME.conf
STORAGE=c0
$BC -c $CONF EOF
update slots storage=$STORAGE
quit
EOF
--[snip]--
Hope this helps.
--
Bill Arlofski
Reverse Polarity, LLC
--
Nokia and ATT present the 2010 Calling All Innovators-North
America contest
Create new apps games for the Nokia N8 for consumers in U.S. and
Canada
$10 million total in prizes - $4M cash, 500 devices, nearly $6M in
marketing
Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi
Store
http://p.sf.net/sfu/nokia-dev2dev
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Nokia and ATT present the 2010 Calling All Innovators-North America contest
Create new apps games for the Nokia N8 for consumers in U.S. and Canada
$10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing
Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store
http://p.sf.net/sfu/nokia-dev2dev___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] No medium found.. How to force it?
I do have that:
Autochanger {
Name = Autochanger
Device = DLTv4
Changer Command = /etc/bacula/scripts/mtx-changer %c %o %S %a %d
Changer Device = /dev/sg4
}
Device {
Name = DLTv4
Drive Index = 0
Media Type = tape
Archive Device = /dev/nst0
AutomaticMount = yes
LabelMedia = yes
AlwaysOpen = yes
Autoselect = yes
RemovableMedia = yes
RandomAccess = no
AutoChanger = yes
Alert Command = sh -c 'tapeinfo -f %c |grep TapeAlert|cat'
}
It just tries to use the media that has been removed, even after
update slots had been issued. Perhaps the retention period?? But
should it just pull it from the scratch media since the tape is not
there..?
Pool {
Name = FileServPool-Full-tape
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 1 months
Maximum Volume Jobs = 1
Maximum Volumes = 12
Storage = SLDLTv4
}
Pool {
Name = FileServPool-Diff-tape
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 1 months
Maximum Volumes = 1
Storage = SLDLTv4
}
Pool {
Name = FileServPool-Incre-tape
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 5 days
Maximum Volumes = 1
Storage = SLDLTv4
}
Thanks
--
Romer Ventura
On Oct 6, 2010, at 2:46 PM, Bob Hetzel wrote:
Isnt it?supposed?to pull media from scratch pool?
I believe it will pull from the scratch pool if only if there are no
acceptable volumes in the pool. CNH895 was an acceptable volume even
though it was not in the changer so it picked that over grabbing one
from the scratch.
There may be some configuration setting to prevent bacula from
wanting
a volume that is not in the changer but I do not know. Some one else
will have to help with that..
John
In your Storage section of your bacula-dir.conf file, if you are
using an
autochanger you need to specify 'Autochanger = yes' so bacula will
check
the InChanger field when it works with media.
Bob
--
Beautiful is writing same markup. Internet Explorer 9 supports
standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 L3.
Spend less time writing and rewriting code and more time creating
great
experiences on the web. Be a part of the beta today.
http://p.sf.net/sfu/beautyoftheweb
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Beautiful is writing same markup. Internet Explorer 9 supports
standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 L3.
Spend less time writing and rewriting code and more time creating great
experiences on the web. Be a part of the beta today.
http://p.sf.net/sfu/beautyoftheweb___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] No medium found.. How to force it?
Hello, I recently change the set of tapes for the month and for some reason i am getting errors when backing up data since bacula keeps asking about a tape that was previously used. How can i get bacula to use the new set? i've done the updata slots and label barcode, etc and nothing seems to be working. Here is the message i get: 05-Oct 10:53 housigma25-sd JobId 118: Invalid slot=0 defined in catalog for Volume CNH895 on DLTv4 (/dev/nst0). Manual load may be required. 05-Oct 10:53 housigma25-sd JobId 118: 3301 Issuing autochanger loaded? drive 0 command. 05-Oct 10:53 housigma25-sd JobId 118: 3302 Autochanger loaded? drive 0, result: nothing loaded. 05-Oct 10:53 housigma25-sd JobId 118: 3301 Issuing autochanger loaded? drive 0 command. 05-Oct 10:53 housigma25-sd JobId 118: 3302 Autochanger loaded? drive 0, result: nothing loaded. 05-Oct 10:53 housigma25-sd JobId 118: Warning: mount.c:221 Open device DLTv4 (/dev/nst0) Volume CNH895 failed: ERR=dev.c:491 Unable to open device DLTv4 (/dev/nst0): ERR=No medium found CNH895 is no longer in the loader since it was used last month.. Any ideas..? Thanks -- Romer Ventura -- Beautiful is writing same markup. Internet Explorer 9 supports standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 L3. Spend less time writing and rewriting code and more time creating great experiences on the web. Be a part of the beta today. http://p.sf.net/sfu/beautyoftheweb___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Repeated attempts to load non-present tape
I have the same problem, please let me know if you have found a solution. Thanks -- Romer Ventura On Aug 9, 2010, at 8:23 PM, Craig Miskell wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, This past weekend, a weekly job decided it didn't want to use the volumes that were available in the autochanger. Consequently, bacula tried to load a tape that was in the catalog, but wasn't present. Unfortunately, it tried to do this repeatedly, logging the following set of logs every few seconds: ausv01-sd JobId 350: Invalid slot=0 defined in catalog for Volume 20L4 on Drive-1 (/dev/nst0). Manual load may be required. ausv01-sd JobId 350: 3301 Issuing autochanger loaded? drive 0 command. ausv01-sd JobId 350: 3302 Autochanger loaded? drive 0, result: nothing loaded. ausv01-sd JobId 350: 3301 Issuing autochanger loaded? drive 0 command. ausv01-sd JobId 350: 3302 Autochanger loaded? drive 0, result: nothing loaded. ausv01-sd JobId 350: Warning: mount.c:227 Open device Drive-1 (/ dev/nst0) Volume 20L4 failed: ERR=dev.c:491 Unable to open device Drive-1 (/dev/nst0): ERR=No medium found By Monday, there were 1million log records there. I would expect it to realise that the tape isn't available, report that once, with reminders, and otherwise sit quietly waiting for operator intervention to provide the tape it wanted. It's done similar before but I've never quite nailed down the scenario (there were some situations where the operator hadn't run update slots). Has anyone else seen this behaviour? If so, is there a simple known fix? Alternatively, any suggestions/guesses as to why this might happen would be gratefully received, as I might then be able to come up with some sort of fix. Bacula version is 5.0.0. Thanks, - -- Craig Miskell Senior Systems Administrator Opus International Consultants Phone: +64 4 471 7209 Criticizing a man for not holding political office is like criticizing a dog for not humping your leg. Both have the ability to do the deed but the superior ones choose not to. -- ronniecat, in rec.arts.comics.strips -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkxgqgQACgkQmDveRtxWqnYwXgCfWPN8yx65zPFfRw+yTv0/SEH/ VkUAoKb2TDGRCUE9V3OH/BGtN9e6L0oW =oac3 -END PGP SIGNATURE- -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- Beautiful is writing same markup. Internet Explorer 9 supports standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 L3. Spend less time writing and rewriting code and more time creating great experiences on the web. Be a part of the beta today. http://p.sf.net/sfu/beautyoftheweb___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] No medium found.. How to force it?
I have done update slots *update slots Automatically selected Catalog: MyCatalog Using Catalog MyCatalog The defined Storage resources are: 1: SLDLTv4 2: File Select Storage resource (1-2): 1 Connecting to Storage daemon SLDLTv4 at housigma25.h-st.com:9103 ... 3306 Issuing autochanger slots command. Device DLTv4 has 16 slots. Connecting to Storage daemon SLDLTv4 at housigma25.h-st.com:9103 ... 3306 Issuing autochanger list command. Catalog record for Volume CNH902 updated to reference slot 1. Catalog record for Volume CNH903 updated to reference slot 2. Catalog record for Volume CNH904 updated to reference slot 3. Catalog record for Volume CNH905 updated to reference slot 4. Catalog record for Volume CNH906 updated to reference slot 5. Catalog record for Volume CNH907 updated to reference slot 6. Catalog record for Volume CNH908 updated to reference slot 7. It just doesnt get the change. For some reason bacula still thinks that the tape still needs to be used. Maybe is my retention settings that it is screwing it up. I am gonna try to mark it as used and see what happens. Thanks -- Romer Ventura On Oct 5, 2010, at 11:34 AM, Phil Stracchino wrote: On 10/05/10 11:59, Romer Ventura wrote: Hello, I recently change the set of tapes for the month and for some reason i am getting errors when backing up data since bacula keeps asking about a tape that was previously used. How can i get bacula to use the new set? i've done the updata slots and label barcode, etc and nothing seems to be working. Here is the message i get: 05-Oct 10:53 housigma25-sd JobId 118: Invalid slot=0 defined in catalog for Volume CNH895 on DLTv4 (/dev/nst0). Manual load may be required. 05-Oct 10:53 housigma25-sd JobId 118: 3301 Issuing autochanger loaded? drive 0 command. 05-Oct 10:53 housigma25-sd JobId 118: 3302 Autochanger loaded? drive 0, result: nothing loaded. 05-Oct 10:53 housigma25-sd JobId 118: 3301 Issuing autochanger loaded? drive 0 command. 05-Oct 10:53 housigma25-sd JobId 118: 3302 Autochanger loaded? drive 0, result: nothing loaded. 05-Oct 10:53 housigma25-sd JobId 118: Warning: mount.c:221 Open device DLTv4 (/dev/nst0) Volume CNH895 failed: ERR=dev.c:491 Unable to open device DLTv4 (/dev/nst0): ERR=No medium found CNH895 is no longer in the loader since it was used last month.. This looks like you need to issue an Update Slots command. -- Phil Stracchino, CDK#2 DoD#299792458 ICBM: 43.5607, -71.355 ala...@caerllewys.net ala...@metrocast.net p...@co.ordinate.org Renaissance Man, Unix ronin, Perl hacker, Free Stater It's not the years, it's the mileage. -- Beautiful is writing same markup. Internet Explorer 9 supports standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 L3. Spend less time writing and rewriting code and more time creating great experiences on the web. Be a part of the beta today. http://p.sf.net/sfu/beautyoftheweb ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- Beautiful is writing same markup. Internet Explorer 9 supports standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 L3. Spend less time writing and rewriting code and more time creating great experiences on the web. Be a part of the beta today. http://p.sf.net/sfu/beautyoftheweb___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] No medium found.. How to force it?
| MediaType | LastWritten | +-++---+-+-+-- +--+-+--+---+--- +-+ | 21 | CNH901 | Append| 1 | 751,822,848 |1 | 10,368,000 | 1 |0 | 0 | tape | 2010-08-29 18:23:52 | +-++---+-+-+-- +--+-+--+---+--- +-+ Thanks -- Romer Ventura On Oct 5, 2010, at 12:02 PM, John Drescher wrote: 2010/10/5 Romer Ventura rvent...@h-st.com: I have done update slots *update slots Automatically selected Catalog: MyCatalog Using Catalog MyCatalog The defined Storage resources are: 1: SLDLTv4 2: File Select Storage resource (1-2): 1 Connecting to Storage daemon SLDLTv4 at housigma25.h-st.com:9103 ... 3306 Issuing autochanger slots command. Device DLTv4 has 16 slots. Connecting to Storage daemon SLDLTv4 at housigma25.h-st.com:9103 ... 3306 Issuing autochanger list command. Catalog record for Volume CNH902 updated to reference slot 1. Catalog record for Volume CNH903 updated to reference slot 2. Catalog record for Volume CNH904 updated to reference slot 3. Catalog record for Volume CNH905 updated to reference slot 4. Catalog record for Volume CNH906 updated to reference slot 5. Catalog record for Volume CNH907 updated to reference slot 6. Catalog record for Volume CNH908 updated to reference slot 7. It just doesnt get the change. For some reason bacula still thinks that the tape still needs to be used. Maybe is my retention settings that it is screwing it up. I am gonna try to mark it as used and see what happens. Thanks -- Look at the output of list media. John -- Beautiful is writing same markup. Internet Explorer 9 supports standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 L3. Spend less time writing and rewriting code and more time creating great experiences on the web. Be a part of the beta today. http://p.sf.net/sfu/beautyoftheweb___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] No medium found.. How to force it?
Isnt it supposed to pull media from scratch pool?
Based on the info bellow, does it mean i should set Pool to
scratch...? What i would like to have is first sunday of the month do
a full back up, weekdays do an incremental, then every sunday (except
1st sunday of the month) do a differential back up.
Everything worked fine, till i had to replace the monthly set. How
can i get pass this?
bacula-dir.conf
JobDefs {
Name = H34-FileServ-def
Type = Backup
Level = Full
Schedule = WeeklyCycle
Messages = Standard
Pool = FileServPool-Full-tape
Full Backup Pool = FileServPool-Full-tape
Differential Backup Pool = FileServPool-Diff-tape
Incremental Backup Pool = FileServPool-Incre-tape
Write Bootstrap = /var/lib/bacula/%c.bsr
Priority = 10
}
Job {
Name = H34-FileServer
JobDefs = H34-FileServ-def
Client = housigma34-fd
FileSet = H34-FileServ
}
Schedule {
Name = WeeklyCycle
Run = Level=Full 1st sun at 18:00
Run = Level=Differential 2nd-5th sun at 18:00
Run = Level=Incremental mon-fri at 20:00
}
Pool {
Name = FileServPool-Full-tape
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 1 months
Maximum Volume Jobs = 1
# Label Format = Full-
Maximum Volumes = 12
Storage = SLDLTv4
}
Pool {
Name = FileServPool-Diff-tape
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 1 months
# Maximum Volume Jobs = 1
# Label Format = Full-
Maximum Volumes = 1
Storage = SLDLTv4
}
Pool {
Name = FileServPool-Incre-tape
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 5 days
# Maximum Volume Jobs = 1
# Label Format = IncreFileServ-
Maximum Volumes = 1
Storage = SLDLTv4
}
Thanks
--
Romer Ventura
On Oct 5, 2010, at 12:41 PM, John Drescher wrote:
Pool: FileServPool-Full-tape
+-++---+-+-
+--+--+-+--+---+---
+-+
| MediaId | VolumeName | VolStatus | Enabled | VolBytes|
VolFiles |
VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten
|
+-++---+-+-
+--+--+-+--+---+---
+-+
| 15 | CNH895 | Recycle | 1 | 1
|0 |
2,592,000 | 1 |0 | 0 | tape | 2010-08-25
14:31:09
|
| 16 | CNH896 | Used | 1 | 139,932,721,152
| 140 |
2,592,000 | 1 |0 | 0 | tape | 2010-08-25
18:27:05
|
+-++---+-+-
+--+--+-+
So the reason for the problem is the tape CNH895 that bacula wants is
the only available tape in the FileServPool-Full-tape pool
John
--
Beautiful is writing same markup. Internet Explorer 9 supports
standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 L3.
Spend less time writing and rewriting code and more time creating great
experiences on the web. Be a part of the beta today.
http://p.sf.net/sfu/beautyoftheweb___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] No medium found.. How to force it?
How can i manually mark the tape as Used...? I havent been able to find it in the docs. Thanks -- Romer Ventura On Oct 5, 2010, at 11:35 AM, John Drescher wrote: 2010/10/5 Romer Ventura rvent...@h-st.com: Hello, I recently change the set of tapes for the month and for some reason i am getting errors when backing up data since bacula keeps asking about a tape that was previously used. How can i get bacula to use the new set? i've done the updata slots and label barcode, etc and nothing seems to be working. Here is the message i get: 05-Oct 10:53 housigma25-sd JobId 118: Invalid slot=0 defined in catalog for Volume CNH895 on DLTv4 (/dev/nst0). Manual load may be required. 05-Oct 10:53 housigma25-sd JobId 118: 3301 Issuing autochanger loaded? drive 0 command. 05-Oct 10:53 housigma25-sd JobId 118: 3302 Autochanger loaded? drive 0, result: nothing loaded. 05-Oct 10:53 housigma25-sd JobId 118: 3301 Issuing autochanger loaded? drive 0 command. 05-Oct 10:53 housigma25-sd JobId 118: 3302 Autochanger loaded? drive 0, result: nothing loaded. 05-Oct 10:53 housigma25-sd JobId 118: Warning: mount.c:221 Open device DLTv4 (/dev/nst0) Volume CNH895 failed: ERR=dev.c:491 Unable to open device DLTv4 (/dev/nst0): ERR=No medium found CNH895 is no longer in the loader since it was used last month.. Any ideas..? Thanks Mark the removed tape as Full, Used or if you totally want bacula to ignore it Archive. John -- Beautiful is writing same markup. Internet Explorer 9 supports standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 L3. Spend less time writing and rewriting code and more time creating great experiences on the web. Be a part of the beta today. http://p.sf.net/sfu/beautyoftheweb___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] job waiting for a mount request
Hello, So i have a Quantum Super Loader, which library holds 8 tapes. Yesterday i removed the old tapes and put in new tapes for the month. I then proceeded to do update and since they are new tapes for bacula i issued label barcode. Last night's jobs did not run and status shows: Running Jobs: Console connected at 08-Sep-10 10:22 JobId Level Name Status == 83 Increme H34-FileServer.2010-09-08_20.00.00_46 is waiting for a mount request 84 Increme H22-MailServer.2010-09-08_20.00.00_47 is waiting execution 85 FullBackupCatalog.2010-09-08_23.10.00_48 is waiting execution Device status: Autochanger Autochanger with devices: DLTv4 (/dev/nst0) Device FileStorage (/srv/staging/backups) is not open. Device DLTv4 (/dev/nst0) is not open. Device is BLOCKED waiting for mount of volume CNH897, Pool:FileServPool-Incre-tape Media type: tape Drive 0 status unknown. Used Volume status: CNH897 on device DLTv4 (/dev/nst0) Reader=0 writers=0 devres=1 volinuse=0 That volume is no longer in the library, what can i do? Thanks -- Romer Ventura -- This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Question about jobs and pools
| 831,946,752 |2 | 10,368,000 | 1 |5 | 1 | tape | 2010-08-27 20:24:00 | +-++---+-+-+-- +--+-+--+---+--- +-+ Pool: MailPool-Diff-tape +-++---+-+-+-- +--+-+--+---+--- +-+ | MediaId | VolumeName | VolStatus | Enabled | VolBytes| VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten | +-++---+-+-+-- +--+-+--+---+--- +-+ | 21 | CNH901 | Append| 1 | 751,822,848 |1 | 10,368,000 | 1 |7 | 1 | tape | 2010-08-29 18:23:52 | +-++---+-+-+-- +--+-+--+---+--- +-+ Thanks -- Romer Ventura -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Add pre-labeled volumes to a pool
Yep, i agree with John. Put all the tapes in Scratch Pool, then whenever jobs run they'll be taken out of scratch into the job's pool as needed. Thanks -- Romer Ventura On Aug 26, 2010, at 10:16 AM, John Drescher wrote: On Thu, Aug 26, 2010 at 11:04 AM, Rory Campbell-Lange r...@campbell-lange.net wrote: On 26/08/10, Willians Vivanco (willian...@infomed.sld.cu) wrote: Hi, i'm having a trouble... I'm using Bacula 2.4.4 and a HP TapeLibrary MSL6000 with LTO3 tapes. My situation is: in the beginning, i'm just have 4 tapes in use and works right, now i'm received new tapes, but they're pre-labeled. I put them into the TapeLibrary magazines, after the 4 tapes in use but i don't know how add them to my pool. Can anybody help me? If you use the label command from bconsole, you are asked for which pool the relevant tape should be added to. You should not use the label command for an autochanger with barcodes. use label barcodes instead and put all tapes in the Scratch Pool. John -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Bacula using old tapes instead of the loaded ones.
+-++---+-+--+-- +--+-+--+---+--- +-+ | MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten | +-++---+-+--+-- +--+-+--+---+--- +-+ | 6 | CNH912 | Append| 1 | 64,512 |0 |2,592,000 | 1 |0 | 0 | tape | -00-00 00:00:00 | +-++---+-+--+-- +--+-+--+---+--- +-+ Pool: Diff-Pool-dsk-tpe No results to list. Pool: Incre-Pool-dsk-dsk But CNH914 is on my hands... It's not in the super loader WTF..? I did run update command on the pools but nothing changed. Any ideas...? Thanks -- Romer Ventura -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Backup plan - Pool errors
Hello,
So what i want to do is:
1.- Full backups run first sunday of the month.
2.- Incremental backups run monday through friday
3.- Differential backups run 2dn-5th sundays of the month.
At the moment i am backing up 2 servers; file server and mail server.
File server has 310GB of data and it would?certainly?fit in 2 VS1
tapes. Mail server is 100GB so 1 VS1 tape will be enough.
I dont want the full backup jobs to exceed those amount so i want to
set file server job to use 2 tapes and mail server 1 tape. Then use
the?remaining?tapes for incremental and?differential?(we have 7 tapes
in the super loader). So file server job would use 2 tapes for full
and 1 tape for incremental and differential (3 tapes total). Mail
server 1 tape for full and 1 tape for incremental and differential.
We also have 5 sets of 7 tapes and i plan to use 1 set per month so
that we have 5 months of backups and be able to restore data from any
point in time during the past 5 months. I would like to have the full
backup tapes to be written once until the whole ?cycle runs and it's
time to use them again.
The problem i am having is that when the file server job runs, it
adds 2 tapes to the Full-pool, then the mail server job runs it says
i cant add anymore tapes to the pool.
Do that mean that i have to define more pools if i want to separate
the mail server and file server tapes...?
Here are my pool definitions:
Pool {
Name = Full-Pool-dsk-tpe
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 1 months
Maximum Volume Jobs = 1
# Label Format = Full-
Maximum Volumes = 2
Storage = SLDLTv4
}
Pool {
Name = Diff-Pool-dsk-tpe
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 1 months
# Maximum Volume Jobs = 1
# Label Format = Full-
Maximum Volumes = 1
Storage = SLDLTv4
}
Pool {
Name = Incre-Pool-dsk-dsk
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 5 days
# Maximum Volume Jobs = 1
# Label Format = IncreFileServ-
Maximum Volumes = 1
Storage = SLDLTv4
}
Thanks
--
Romer Ventura
--
Sell apps to millions through the Intel(R) Atom(Tm) Developer Program
Be part of this innovative community and reach millions of netbook users
worldwide. Take advantage of special opportunities to increase revenue and
speed time-to-market. Join now, and jumpstart your future.
http://p.sf.net/sfu/intel-atom-d2d___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Backup plan - Pool errors
| +-+--+---+-+- +--+--+-+--+---+--- +-+ Pool: MailPool-Full-tape No results to list. Pool: MailPool-Incre-tape No results to list. Pool: FileServPool-Full-tape +-++---+-+--- +--+--+-+--+---+--- +-+ | MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten | +-++---+-+--- +--+--+-+--+---+--- +-+ | 15 | CNH895 | Used | 1 | 2,999,808,000 | 3 |2,592,000 | 1 |1 | 1 | tape | 2010-08-25 09:59:25 | +-++---+-+--- +--+--+-+--+---+--- +-+ Pool: FileServPool-Diff-tape No results to list. Pool: FileServPool-Incre-tape No results to list. Pool: MailPool-Diff-tape No results to list. Thanks -- Romer Ventura On Aug 25, 2010, at 10:02 AM, John Drescher wrote: So what i want to do is: 1.- Full backups run first sunday of the month. 2.- Incremental backups run monday through friday 3.- Differential backups run 2dn-5th sundays of the month. At the moment i am backing up 2 servers; file server and mail server. File server has 310GB of data and it would?certainly?fit in 2 VS1 tapes. Not necessarily. VS1 tapes are 80GB native each. There is no guarantee that you will get the overly optimistic 2:1 compression rate. More likely you will fit 120GB on each 80GB tape with compression enabled. Mail server is 100GB so 1 VS1 tape will be enough. I dont want the full backup jobs to exceed those amount so i want to set file server job to use 2 tapes and mail server 1 tape. Then use the?remaining?tapes for incremental and?differential?(we have 7 tapes in the super loader). So file server job would use 2 tapes for full and 1 tape for incremental and differential (3 tapes total). Mail server 1 tape for full and 1 tape for incremental and differential. We also have 5 sets of 7 tapes and i plan to use 1 set per month so that we have 5 months of backups and be able to restore data from any point in time during the past 5 months. I would like to have the full backup tapes to be written once until the whole ?cycle runs and it's time to use them again. The problem i am having is that when the file server job runs, it adds 2 tapes to the Full-pool, then the mail server job runs it says i cant add anymore tapes to the pool. Do that mean that i have to define more pools if i want to separate the mail server and file server tapes...? Post the output of list media John -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Backup plan - Pool errors
I dont want to have a single full backup. I want a single full backup per set. I have 5 sets and each set has 7 tapes. I want to keep the full backup and it;s differential and incremental backups for 4 months or 5 months before a set can be over written. Does that mean that the Full-Pool will have to have a maxVol = 10 to account 2 tapes for each month? Thanks -- Romer Ventura On Aug 25, 2010, at 11:19 AM, Phil Stracchino wrote: On 08/25/10 11:00, Romer Ventura wrote: Tapes are 120GB native capacity and 320GB with compression. 2.75:1 compression? Only if you have unusually compressible data. I assume you meant 160GB native; still, 1.3:1 to 1.5:1 is a much more likely overall compression ratio with real-world data. But the short answer is, if you expect your fileserver to fill two tapes, and your mailserver to fill one, and the pool your fileserver tapes go in have a two-tape limit, then yes, you're going to need to back up your mailserver to a separate pool unless you're willing to increase that volume limit. And if your fileserver backup runs over two tapes, you have a problem. But then, you have a problem anyway with this plan. Because if your fileserver takes two tapes to back up, and is backed up to a pool with a two-tape limit, then you've got to erase each full backup before you can start a new one. Then, if there's a problem with the new backup (even if it just runs beyond the two-tape pool limit, which will cause it to fail), you don't have a backup. And then if there's a problem on the server before you can make a new backup, you're dead in the water. This is how Microsoft managed to lose thousands of Sidekick customers' data. Microsoft's Danger unit only had room for a single full backup, and had to delete it in order to begin a new backup; then they cancelled the new backup in progress, because the manager was impatient and didn't want to wait the three days for the backup to complete; then the major system update they were backing up in preparation for went south. Any backup plan that calls for having only a single full backup that must be purged to begin a new one, is a bad plan. Prudent planning would call for your full backup pool to hold AT LEAST sufficient tapes for two complete cycles of your Full backups, allowing a 50% safety margin on the expected tape usage for each one. So, if you *expect* your full backup to take two tapes, based on your expectations of compression, allow for at least six tapes in your pool. Remember, tape is cheap, and un-backed-up data may be irreplaceable. -- Phil Stracchino, CDK#2 DoD#299792458 ICBM: 43.5607, -71.355 ala...@caerllewys.net ala...@metrocast.net p...@co.ordinate.org Renaissance Man, Unix ronin, Perl hacker, Free Stater It's not the years, it's the mileage. -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- Sell apps to millions through the Intel(R) Atom(Tm) Developer Program Be part of this innovative community and reach millions of netbook users worldwide. Take advantage of special opportunities to increase revenue and speed time-to-market. Join now, and jumpstart your future. http://p.sf.net/sfu/intel-atom-d2d___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Enabling hardware compression
Hello, I am running Bacula 5.0.2 with a Quantum SuperLoader 3 with DLTv4 tape drive. If i want to enable hardware compression so i can use 320GB from my VS1 tapes all i would need to do is run this command: mt -f /dev/nst0 defcompression 1, correct? Is there any way to enable and disable hardware compression using bacula before a job starts..? Thanks -- Romer Ventura -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Backup too slow
See my post at citrix forums. http://forums.citrix.com/thread.jspa?threadID=271590tstart=0 Do the registry fix and you'll be good to go. Thanks -- Romer Ventura On Aug 17, 2010, at 10:00 AM, Alípio Luiz wrote: Hello guys. I'm running the director in a Linux system. So I'm trying to backup a client running Win2k3 (virtualized in a Citrix XenServer).. However the copy is too slow.. Server Bacula DIR version 5.0.1 (x86_64-suse-linux-gnu) Client FD version: 5.0.1 Take a look: ** *** SECITEC.srvarq05 Version: 5.0.1 (24 February 2010) VSS Linux Cross- compile Win32 Daemon started 17-Aug-10 10:12, 0 Jobs run since started. Heap: heap=0 smbytes=162,577 max_bytes=162,577 bufs=100 max_bufs=100 Sizeof: boffset_t=8 size_t=4 debug=0 trace=1 Running Jobs: JobId 833 Job SECITEC.srvarq05.2010-08-17_10.15.34_58 is running. VSS Full Backup Job started: 17-Aug-10 10:20 Files=2 Bytes=128,341,723 Bytes/sec=166,245 Errors=0 Files Examined=2 Processing file: C:/SYSTEMSTATE/SECITEC-srvarq05-SYSTEMSTATE.BKF SDReadSeqNo=5 fd=624 Terminated Jobs: ** *** Bytes/sec=166,245 (tooo slow) May you help me? Thanks in advance. -- Alípio Luiz [Squidy] | Brasil - Cuiabá/MT Email: alipio.luizΘgmail.com Linux User #251497 -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] update bacula
./configure make make install ??? I think i read somewhere in the docs that it would not replace your conf files. The only thing you need to check out is the database part, it should be in the docs. Thanks -- Romer Ventura On Aug 17, 2010, at 2:38 PM, nizam wrote: Hi All, I have in the server bacula version 2.0.2. Does anybody know how to update to 5.03 which is the current version Regards, Nizam +- - |This was sent by nizam.ahm...@gmail.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +- - -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Job Def for multiple job levels not working
Hello,
I am trying to have 1Job definition and have it run Full,
Incremental and Differential backups to different media depending on
the schedule set, but i cant get it to work. What i want to do is do
full backups 1st sunday of every month and write it to tape, then do
incremental backups monday-friday and write it to disk, finally do
differential backups every sunday except for the 1st sun of the month
and write it to tape.
The job H34-FileServ-dsk-tap keeps running every night when it
should just run on sundays
Here is what i got:
JobDefs {
Name = H34-FileServ-def
Type = Backup
Level = Incremental
Client = housigma34-fd
FileSet = H34-FileServ
Schedule = WeeklyCycle
Messages = Standard
# Pool = Default
Full Backup Pool = Full-Pool-dsk-tpe
Differential Backup Pool = Diff-Pool-dsk-tpe
Incremental Backup Pool = Incre-Pool-dsk-dsk
Write Bootstrap = /var/lib/bacula/%c.bsr
Priority = 10
}
Job {
Name = H34-FileServ-dsk-tap
JobDefs = H34-FileServ-def
Pool = Default
Storage = SLDLTv4
}
Job {
Name = H34-FileServ-dsk-dsk
JobDefs = H34-FileServ-def
Pool = Default
Storage = File
}
Schedule {
Name = WeeklyCycle
Run = Level=Full Pool=Full-Pool-dsk-tpe 1st sun at 20:00
Run = Level=Differential Pool=Diff-Pool-dsk-tpe 2nd-5th sun at 20:00
Run = Level=Incremental Pool=Incre-Pool-dsk-dsk mon-fri at 22:00
}
Schedule {
Name = WeeklyCycleAfterBackup
Run = Full sun-sat at 23:10
}
Storage {
Name = SLDLTv4
# Do not use localhost here
Address = housigma25.DOMAIN.com# N.B. Use a fully
qualified name here
SDPort = 9103
Password = asfasdfsdasdaf
Device = DLTv4
Media Type = tape
}
Storage {
Name = File
Address = housigma25.DOMAIN.com
SDPort = 9103
Password = asdfsadfadsfadsf
Device = FileStorage
Media Type = File
}
Pool {
Name = Scratch
Pool Type = Backup
}
Pool {
Name = Default
Pool Type = Backup
Recycle = yes # Bacula can automatically
recycle Volumes
AutoPrune = yes # Prune expired volumes
Volume Retention = 14 days # one year
Maximum Volume Jobs = 1
}
Pool {
Name = Full-Pool-dsk-tpe
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 1 months
Maximum Volume Jobs = 1
# Label Format = Full-
Maximum Volumes = 2
}
Pool {
Name = Diff-Pool-dsk-tpe
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 1 months
Maximum Volume Jobs = 1
# Label Format = Full-
Maximum Volumes = 3
}
Pool {
Name = Incre-Pool-dsk-dsk
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 5 days
Maximum Volume Jobs = 1
Label Format = IncreFileServ-
Maximum Volumes = 5
}
Thanks
--
Romer Ventura
--
This SF.net email is sponsored by
Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev ___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Job Def for multiple job levels not working
After the changes, i try to restart bacula and it complaints about
No storage for job:
# /etc/init.d/bacula-director restart
Stopping Bacula Director...:.
Starting Bacula Director...:12-Aug 13:16 bacula-dir JobId 0: Fatal
error: No storage specified in Job H34-FileServ-dsk-tap nor in Pool.
12-Aug 13:16 bacula-dir ERROR TERMINATION
Please correct configuration file: /etc/bacula/bacula-dir.conf
failed!
Here are what it looks like:
JobDefs {
Name = H34-FileServ-def
Type = Backup
Level = Full
Schedule = WeeklyCycle
Messages = Standard
Pool = Full-Pool-dsk-tpe
Full Backup Pool = Full-Pool-dsk-tpe
Differential Backup Pool = Diff-Pool-dsk-tpe
Incremental Backup Pool = Incre-Pool-dsk-dsk
Write Bootstrap = /var/lib/bacula/%c.bsr
Priority = 10
}
Job {
Name = H34-FileServ-dsk-tap
JobDefs = H34-FileServ-def
Client = housigma34-fd
FileSet = H34-FileServ
}
Schedule {
Name = WeeklyCycle
Run = Level=Full 1st sun at 20:00
Run = Level=Differential 2nd-5th sun at 20:00
Run = Level=Incremental mon-fri at 22:00
}
Storage {
Name = SLDLTv4
# Do not use localhost here
Address = housigma25.domain.com# N.B. Use a fully
qualified name here
SDPort = 9103
Password = adsfsdfsdf
Device = DLTv4
Media Type = tape
}
Storage {
Name = File
Address = housigma25.domain.com
SDPort = 9103
Password = asdfsdfasd
Device = FileStorage
Media Type = File
}
Pool {
Name = Scratch
Pool Type = Backup
}
Pool {
Name = Default
Pool Type = Backup
Recycle = yes # Bacula can automatically
recycle Volumes
AutoPrune = yes # Prune expired volumes
Volume Retention = 14 days # one year
Maximum Volume Jobs = 1
}
Pool {
Name = Full-Pool-dsk-tpe
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 1 months
Maximum Volume Jobs = 1
# Label Format = Full-
Maximum Volumes = 2
}
Pool {
Name = Diff-Pool-dsk-tpe
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 1 months
Maximum Volume Jobs = 1
# Label Format = Full-
Maximum Volumes = 3
}
Pool {
Name = Incre-Pool-dsk-dsk
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 5 days
Maximum Volume Jobs = 1
Label Format = IncreFileServ-
Maximum Volumes = 5
}
Thanks
--
Romer Ventura
On Aug 12, 2010, at 12:44 PM, Phil Stracchino wrote:
On 08/12/10 10:03, Romer Ventura wrote:
Hello,
I am trying to have 1Job definition and have it run Full, Incremental
and Differential backups to different media depending on the schedule
set, but i cant get it to work. What i want to do is do full
backups 1st
sunday of every month and write it to tape, then do incremental
backups
monday-friday and write it to disk, finally do differential backups
every sunday except for the 1st sun of the month and write it to
tape.
The job H34-FileServ-dsk-tap keeps running every night when it
should
just run on sundays
Here is what i got:
You're doing this wrong. You've defined two separate Jobs for the
same
backup, you've forced the level in your JobDefs, and you have two
redundant sets of Pool overrides.
JobDefs {
Name = H34-FileServ-def
Type = Backup
Level = Incremental
Client = housigma34-fd
FileSet = H34-FileServ
Schedule = WeeklyCycle
Messages = Standard
# Pool = Default
Full Backup Pool = Full-Pool-dsk-tpe
Differential Backup Pool = Diff-Pool-dsk-tpe
Incremental Backup Pool = Incre-Pool-dsk-dsk
Write Bootstrap = /var/lib/bacula/%c.bsr
Priority = 10
}
Remove the Fileset and Client specificiation from this JobDefs
resource.
They belong in the Job resource; otherwise, you've tied this
JobDefs to
a single client and completely defeated the point of JobDefs by making
it non-reusable. I'd advise making the default level in the JobDefs
Full, and the default Pool your full pool.
Job {
Name = H34-FileServ-dsk-tap
JobDefs = H34-FileServ-def
Pool = Default
Storage = SLDLTv4
}
Don't specify the Storage in the Job definition. Let Bacula figure
out
which Storage to use. Your FileSet and your Client directives belong
here. You're also specifying a static default Pool in your Job
which is
better left in the JobDefs.
Job {
Name = H34-FileServ-dsk-dsk
JobDefs = H34-FileServ-def
Pool = Default
Storage = File
}
Get rid of this second Job definition. It's doing you no good
whatsoever and just confusing the issue.
Schedule {
Name = WeeklyCycle
Run = Level=Full Pool=Full-Pool-dsk-tpe 1st sun at 20:00
Run = Level=Differential Pool=Diff-Pool-dsk-tpe 2nd-5th sun at
20:00
Run = Level=Incremental Pool=Incre-Pool-dsk-dsk mon-fri at 22:00
}
Remove the Pool overrides from this Schedule. Pool overrides in the
Schedule are deprecated because they don't work reliably and cannot be
made to work reliably. Having two sets of overrides for the same
job is
likely confusing Bacula. Keep the ones in your JobDefs; lose
Re: [Bacula-users] Job Def for multiple job levels not working
Sorry, i just realized that i can define storage in the pools..
I'll give this a shot and see how it works.
Thanks
--
Romer Ventura
On Aug 12, 2010, at 12:44 PM, Phil Stracchino wrote:
On 08/12/10 10:03, Romer Ventura wrote:
Hello,
I am trying to have 1Job definition and have it run Full, Incremental
and Differential backups to different media depending on the schedule
set, but i cant get it to work. What i want to do is do full
backups 1st
sunday of every month and write it to tape, then do incremental
backups
monday-friday and write it to disk, finally do differential backups
every sunday except for the 1st sun of the month and write it to
tape.
The job H34-FileServ-dsk-tap keeps running every night when it
should
just run on sundays
Here is what i got:
You're doing this wrong. You've defined two separate Jobs for the
same
backup, you've forced the level in your JobDefs, and you have two
redundant sets of Pool overrides.
JobDefs {
Name = H34-FileServ-def
Type = Backup
Level = Incremental
Client = housigma34-fd
FileSet = H34-FileServ
Schedule = WeeklyCycle
Messages = Standard
# Pool = Default
Full Backup Pool = Full-Pool-dsk-tpe
Differential Backup Pool = Diff-Pool-dsk-tpe
Incremental Backup Pool = Incre-Pool-dsk-dsk
Write Bootstrap = /var/lib/bacula/%c.bsr
Priority = 10
}
Remove the Fileset and Client specificiation from this JobDefs
resource.
They belong in the Job resource; otherwise, you've tied this
JobDefs to
a single client and completely defeated the point of JobDefs by making
it non-reusable. I'd advise making the default level in the JobDefs
Full, and the default Pool your full pool.
Job {
Name = H34-FileServ-dsk-tap
JobDefs = H34-FileServ-def
Pool = Default
Storage = SLDLTv4
}
Don't specify the Storage in the Job definition. Let Bacula figure
out
which Storage to use. Your FileSet and your Client directives belong
here. You're also specifying a static default Pool in your Job
which is
better left in the JobDefs.
Job {
Name = H34-FileServ-dsk-dsk
JobDefs = H34-FileServ-def
Pool = Default
Storage = File
}
Get rid of this second Job definition. It's doing you no good
whatsoever and just confusing the issue.
Schedule {
Name = WeeklyCycle
Run = Level=Full Pool=Full-Pool-dsk-tpe 1st sun at 20:00
Run = Level=Differential Pool=Diff-Pool-dsk-tpe 2nd-5th sun at
20:00
Run = Level=Incremental Pool=Incre-Pool-dsk-dsk mon-fri at 22:00
}
Remove the Pool overrides from this Schedule. Pool overrides in the
Schedule are deprecated because they don't work reliably and cannot be
made to work reliably. Having two sets of overrides for the same
job is
likely confusing Bacula. Keep the ones in your JobDefs; lose the ones
in the Schedule.
After those changes, you should be looking at something pretty much
like
this:
JobDefs {
Name = H34-FileServ-def
Type = Backup
Level = Full
Schedule = WeeklyCycle
Messages = Standard
Pool = Full-Pool-dsk-tpe
Full Backup Pool = Full-Pool-dsk-tpe
Differential Backup Pool = Diff-Pool-dsk-tpe
Incremental Backup Pool = Incre-Pool-dsk-dsk
Write Bootstrap = /var/lib/bacula/%c.bsr
Priority = 10
}
Job {
Name = H34-FileServ-dsk-tap
JobDefs = H34-FileServ-def
Client = housigma34-fd
FileSet = H34-FileServ
}
Schedule {
Name = WeeklyCycle
Run = Level=Full 1st sun at 20:00
Run = Level=Differential 2nd-5th sun at 20:00
Run = Level=Incremental mon-fri at 22:00
}
Give that a shot and see if it works for you.
--
Phil Stracchino, CDK#2 DoD#299792458 ICBM: 43.5607, -71.355
ala...@caerllewys.net ala...@metrocast.net p...@co.ordinate.org
Renaissance Man, Unix ronin, Perl hacker, Free Stater
It's not the years, it's the mileage.
--
This SF.net email is sponsored by
Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
This SF.net email is sponsored by
Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev ___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] tape has room, but Bacula warning unable to add scratch volume
Hello, I am running a full back up with a size of estimate files=983,529 bytes=306,761,539,624, the backup started normally and used up 1 full tape 160GB (uncompressed), then it switched tapes and continued to copy data to the second tape, but all of the sudden it stops and bacula starts complaining with: JobId 2: Warning: Unable add Scratch Volume, Pool Full-Pool-dsk-tpe full MaxVols=2 list media shows: +-++---+-+- +--+--+-+--+---+--- +-+ | MediaId | VolumeName | VolStatus | Enabled | VolBytes| VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten | +-++---+-+- +--+--+-+--+---+--- +-+ | 1 | CNH910 | Full | 1 | 164,989,504,512 | 166 |2,592,000 | 1 |1 | 1 | tape | 2010-08-10 20:53:33 | | 2 | CNH911 | Used | 1 | 142,552,940,544 | 143 |2,592,000 | 1 |2 | 1 | tape | 2010-08-11 00:53:24 | +-++---+-+- +--+--+-+--+---+--- +-+ Both tapes are the same, both of them are capable of storing 160GB of uncompressed data. Why is it still asking for more tapes? Also, status on director shows: Running Jobs: Console connected at 10-Aug-10 16:13 JobId Level Name Status == 2 FullH34-FileServ-dsk-tap.2010-08-10_22.00.00_08 is waiting for an appendable Volume 3 FullH34-FileServ-dsk-dsk.2010-08-10_22.00.00_09 is waiting on max Client jobs 4 FullBackupCatalog.2010-08-10_23.10.00_10 is waiting for higher priority jobs to finish Terminated Jobs: JobId LevelFiles Bytes Status FinishedName 1 Full983,490307.0 G OK 11-Aug-10 00:55 H34- FileServ-dsk-tap Why is the backup still running even when it is shown in Terminated Jobs with OK status..? Thanks -- Romer Ventura -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] tape has room, but Bacula warning unable to add scratch volume
Yes, i understand that, but when the tape CNH910 got full, bacula unloaded the tape and loaded CNH911, when loading the tape, bacula marked it as used before writing any data to it. It did the same with CNH910. Here is the list of tapes before the job started: Pool: Scratch +-++---+-+--+-- +--+-+--+---+--- +-+ | MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten | +-++---+-+--+-- +--+-+--+---+--- +-+ | 1 | CNH910 | Append| 1 | 64,512 |0 | 31,536,000 | 1 |1 | 1 | tape | -00-00 00:00:00 | | 2 | CNH911 | Append| 1 | 64,512 |0 | 31,536,000 | 1 |2 | 1 | tape | -00-00 00:00:00 | | 3 | CNH912 | Append| 1 | 64,512 |0 | 31,536,000 | 1 |3 | 1 | tape | -00-00 00:00:00 | | 4 | CNH913 | Append| 1 | 64,512 |0 | 31,536,000 | 1 |4 | 1 | tape | -00-00 00:00:00 | | 5 | CNH914 | Append| 1 | 64,512 |0 | 31,536,000 | 1 |5 | 1 | tape | -00-00 00:00:00 | +-++---+-+--+-- +--+-+--+---+--- +-+ Bacula loaded CNH910, marked as used and started to write data, CNH910 got full, tape was unloaded, CNH911 was loaded, marked as used and started to write data. Only that this time it didnt write as much data as with the first tape, even when both of them have the same capacity. Thanks -- Romer Ventura On Aug 11, 2010, at 9:20 AM, John Drescher wrote: 2010/8/11 Romer Ventura rvent...@h-st.com: Hello, I am running a full back up with a size of estimate files=983,529 bytes=306,761,539,624, the backup started normally and used up 1 full tape 160GB (uncompressed), then it switched tapes and continued to copy data to the second tape, but all of the sudden it stops and bacula starts complaining with: JobId 2: Warning: Unable add Scratch Volume, Pool Full-Pool-dsk-tpe full MaxVols=2 list media shows: +-++---+-+- +--+--+-+--+---+--- +-+ | MediaId | VolumeName | VolStatus | Enabled | VolBytes| VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten | +-++---+-+- +--+--+-+--+---+--- +-+ | 1 | CNH910 | Full | 1 | 164,989,504,512 | 166 | 2,592,000 | 1 |1 | 1 | tape | 2010-08-10 20:53:33 | | 2 | CNH911 | Used | 1 | 142,552,940,544 | 143 | 2,592,000 | 1 |2 | 1 | tape | 2010-08-11 00:53:24 | +-++---+-+- +--+--+-+--+---+--- +-+ Both tapes are the same, both of them are capable of storing 160GB of uncompressed data. Why is it still asking for more tapes? Also, status on director shows: One is marked Full the other is marked Used so neither tape is usable. Full means the tape is full. Used means that you have configured bacula to restrict the volume usage in some way (maximum volume jobs, maximum use duration ...) John -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] simple question about volumen
if you are using file storage, i think it would be ok to create a volume per client. However, having 1000 volumes as opposed to 100 big volumes would make a difference.. Thanks -- Romer Ventura On Aug 11, 2010, at 9:14 AM, rpere...@lavabit.com wrote: hello I'm a newbie bacula user. A simple first question. I should create a backup volumen per client backuped ? Bacula may have many client's backups in only one volumen ? I going to use file storage (not tape) Thanks roberto -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] tape has room, but Bacula warning unable to add scratch volume
Could it be the schedule..? Well since i havent got a full backup, i
manually ran the full backup job. Does this mean that since the job
scheduled for the 1st sunday hadnt run, bacula scheduled and tried to
run it as if it was the 1st sun?
Shouldnt bacula check for the a full backup for the same job and then
just do the incremental job? or manually ran jobs do not count on
this checks bacula does...?
Well the schedule is:
Schedule {
Name = WeeklyCycle
Run = Level=Full Pool=Full-Pool-dsk-tpe 1st sun at 20:00
Run = Level=Differential Pool=Diff-Pool-dsk-tpe 2nd-5th sun at 20:00
Run = Level=Incremental Pool=Incre-Pool-dsk-dsk mon-fri at 22:00
}
And the pools:
Pool {
Name = Full-Pool-dsk-tpe
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 1 months
Maximum Volume Jobs = 1
# Label Format = Full-
Maximum Volumes = 2
}
Pool {
Name = Diff-Pool-dsk-tpe
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 1 months
Maximum Volume Jobs = 1
# Label Format = Full-
Maximum Volumes = 3
}
Pool {
Name = Incre-Pool-dsk-dsk
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 5 days
Maximum Volume Jobs = 1
Label Format = IncreFileServ-
Maximum Volumes = 5
}
Thanks
--
Romer Ventura
On Aug 11, 2010, at 9:36 AM, John Drescher wrote:
2010/8/11 Romer Ventura rvent...@h-st.com:
Hello,
I am running a full back up with a size of estimate files=983,529
bytes=306,761,539,624, the backup started normally and used up 1
full tape
160GB (uncompressed), then it switched tapes and continued to copy
data to
the second tape, but all of the sudden it stops and bacula starts
complaining with: JobId 2: Warning: Unable add Scratch Volume, Pool
Full-Pool-dsk-tpe full MaxVols=2
list media shows:
+-++---+-+-
+--+--+-+--+---+---
+-+
| MediaId | VolumeName | VolStatus | Enabled | VolBytes|
VolFiles |
VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten
|
+-++---+-+-
+--+--+-+--+---+---
+-+
| 1 | CNH910 | Full | 1 | 164,989,504,512
| 166 |
2,592,000 | 1 |1 | 1 | tape | 2010-08-10
20:53:33
|
| 2 | CNH911 | Used | 1 | 142,552,940,544
| 143 |
2,592,000 | 1 |2 | 1 | tape | 2010-08-11
00:53:24
|
+-++---+-+-
+--+--+-+--+---+---
+-+
Both tapes are the same, both of them are capable of storing 160GB of
uncompressed data. Why is it still asking for more tapes?
Also, status on director shows:
Running Jobs:
Console connected at 10-Aug-10 16:13
JobId Level Name Status
=
=
2 FullH34-FileServ-dsk-tap.2010-08-10_22.00.00_08 is
waiting for an
appendable Volume
3 FullH34-FileServ-dsk-dsk.2010-08-10_22.00.00_09 is
waiting on max
Client jobs
4 FullBackupCatalog.2010-08-10_23.10.00_10 is waiting for
higher
priority jobs to finish
Terminated Jobs:
JobId LevelFiles Bytes Status FinishedName
1 Full983,490307.0 G OK 11-Aug-10 00:55
H34-FileServ-dsk-tap
Why is the backup still running even when it is shown in
Terminated Jobs
with OK status..?
Thanks
That is a different job. Job 1 finished and wrote 307GB. For some
reason you are running the H34-FileServ-dsk-tap job 2 times.
John
--
This SF.net email is sponsored by
Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev ___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] tape has room, but Bacula warning unable to add scratch volume
No, there was no data in the tape. All tapes were label barcode and placed in the scratch pool. The 142GB were written by that job. Like you said, it seems the same job is running 2 times. I ll wait and see.. Prior to starting the job: Pool: Scratch +-++---+-+--+-- +--+-+--+---+--- +-+ | MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten | +-++---+-+--+-- +--+-+--+---+--- +-+ | 1 | CNH910 | Append| 1 | 64,512 |0 | 31,536,000 | 1 |1 | 1 | tape | -00-00 00:00:00 | | 2 | CNH911 | Append| 1 | 64,512 |0 | 31,536,000 | 1 |2 | 1 | tape | -00-00 00:00:00 | | 3 | CNH912 | Append| 1 | 64,512 |0 | 31,536,000 | 1 |3 | 1 | tape | -00-00 00:00:00 | | 4 | CNH913 | Append| 1 | 64,512 |0 | 31,536,000 | 1 |4 | 1 | tape | -00-00 00:00:00 | | 5 | CNH914 | Append| 1 | 64,512 |0 | 31,536,000 | 1 |5 | 1 | tape | -00-00 00:00:00 | +-++---+-+--+-- +--+-+--+---+--- +-+ After the job was ran: Pool: Scratch +-++---+-+--+-- +--+-+--+---+--- +-+ | MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten | +-++---+-+--+-- +--+-+--+---+--- +-+ | 3 | CNH912 | Append| 1 | 64,512 |0 | 31,536,000 | 1 |3 | 1 | tape | -00-00 00:00:00 | | 4 | CNH913 | Append| 1 | 64,512 |0 | 31,536,000 | 1 |4 | 1 | tape | -00-00 00:00:00 | | 5 | CNH914 | Append| 1 | 64,512 |0 | 31,536,000 | 1 |5 | 1 | tape | -00-00 00:00:00 | +-++---+-+--+-- +--+-+--+---+--- +-+ Pool: Full-Pool-dsk-tpe +-++---+-+- +--+--+-+--+---+--- +-+ | MediaId | VolumeName | VolStatus | Enabled | VolBytes| VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten | +-++---+-+- +--+--+-+--+---+--- +-+ | 1 | CNH910 | Full | 1 | 164,989,504,512 | 166 |2,592,000 | 1 |1 | 1 | tape | 2010-08-10 20:53:33 | | 2 | CNH911 | Used | 1 | 142,552,940,544 | 143 |2,592,000 | 1 |2 | 1 | tape | 2010-08-11 00:53:24 | +-++---+-+- +--+--+-+--+---+--- +-+ Thanks -- Romer Ventura On Aug 11, 2010, at 9:32 AM, John Drescher wrote: Yes, i understand that, but when the tape CNH910 got full, bacula unloaded the tape and loaded CNH911, when loading the tape, bacula marked it as used before writing any data to it. So you are saying there was 148GB of data on CNH911 before the job started. Then bacula loaded the volume, marked it used and then determined it could not write to a used volume so it asked for a different volume? John -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Bacula backups running extremely slowly
I had the same problem: refer to: http://support.citrix.com/article/ CTX124456 Or my post: http://forums.citrix.com/thread.jspa?threadID=271590tstart=0 Thanks -- Romer Ventura On Aug 11, 2010, at 2:14 PM, frozensolid wrote: I have my first backup job running on a Suse Enterprise 10.3 VM. I started the backup at 1:30 am last night, and at noon it was still running and had only made about a 7 GB backup file. The system's CPU load is 0.28 or less while the backup is running, and I've yet to see it go above 2% cpu usage. The job reports it's running at around 300,000 Bytes/sec, though it starts out at around 2,000,000 before I see it start dropping and eventually averages out there. I've tried messing with the Maximum Network Buffer Size but every change I made seem to make matters worse instead of better. I've turned on and off GZIP and it didn't make a difference. I'm not sure what else to consider. It's almost entirely default settings. The Director, Client, and Storage are all running on the same VM. I have the files I'm backing up mounted as network shares, and it's saving the backup file to a diferent network share. The whole network is setup on gigabit, but even on a 100 megabit network I should be seeing more speed than I'm getting. What might I be doing wrong? +- - |This was sent by fro...@frozen-solid.net via Backup Central. |Forward SPAM to ab...@backupcentral.com. +- - -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Bacula backups running extremely slowly
Sorry i missed the Suse part... Thanks -- Romer Ventura On Aug 11, 2010, at 2:14 PM, frozensolid wrote: I have my first backup job running on a Suse Enterprise 10.3 VM. I started the backup at 1:30 am last night, and at noon it was still running and had only made about a 7 GB backup file. The system's CPU load is 0.28 or less while the backup is running, and I've yet to see it go above 2% cpu usage. The job reports it's running at around 300,000 Bytes/sec, though it starts out at around 2,000,000 before I see it start dropping and eventually averages out there. I've tried messing with the Maximum Network Buffer Size but every change I made seem to make matters worse instead of better. I've turned on and off GZIP and it didn't make a difference. I'm not sure what else to consider. It's almost entirely default settings. The Director, Client, and Storage are all running on the same VM. I have the files I'm backing up mounted as network shares, and it's saving the backup file to a diferent network share. The whole network is setup on gigabit, but even on a 100 megabit network I should be seeing more speed than I'm getting. What might I be doing wrong? +- - |This was sent by fro...@frozen-solid.net via Backup Central. |Forward SPAM to ab...@backupcentral.com. +- - -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Recommendation about backups scheduling
What i just started doing is: Full back up the first Sun of every month directly to tape incremental backup mon-fri directly to disk differential backup every sunday except for the 1st sunday directly to tape Our data is about 300GB which will fit fine in 2 tapes, i dont feel like writing daily small sets of data to time is worth the time so i write that to disk and consolidate the changes with the differential backup. This will use 5 tapes per month (of course without current data demands) and allowing me to keep 4 months worth of data with the differential tapes allowing me to go back i time in a weekly manner. Thanks -- Romer Ventura On Aug 8, 2010, at 12:03 PM, Daniel Bareiro wrote: http://en.wikipedia.org/wiki/Backup_rotation_scheme -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Slow backups under XenServer with Windows2003 SP1/R2 guests
Hello,
So i am trying to back up my file server with Bacula and i am having
a difficult time getting it to work. I am able to back up desktops at
7MB/s, non-virtualized windows servers at 4.7MB/s, virtualized
desktops at 4.7MB/s and virtualized windows servers at 100KB/s.??
The servers are any of Windows 2003 SP1 or Windows 2003 R2, the
desktops (virtualized or not) are Windows XP SP3/SP2. My hosts server
all run Citrix XenServer Enterprise, running on HP blades with 8GB
of RAM and dual quad core CPUs on SAS HDDs. The VMs storage resides
in an HP EVA4400 connected via fiber.
If i mount server1's (virtualized windows 2003) share on the bacula
server and copy the same amount of data(3.1GB) it gets done in about
6min. If i copy the data via scp it gets done in about 5min at a
rate of 11MB/s.
But when i run bacula on any virtualized windows 2003 server the
data rate doesnt go higher than 200KB/s.
NOTE: That i am backing all this up to disk.
Here are the relevant config files:
bacula-dir.conf:
Job {
Name = test1
Type = Backup
Level = Full
Client = I USE ANY OF THE CLIENTS BELLOW TO TEST THE SAME SETTINGS
FileSet = wintest
Schedule = WeeklyCycle
Storage = File
Messages = Standard
Pool = Default
Write Bootstrap = /var/lib/bacula/%c.bsr
Priority = 10
}
Client {
Name = vir-server1-fd
Address = vir-server1.DOMAIN.COM
FDPort = 9102
Catalog = MyCatalog
Password = asdfasdfsadfaf # password for FileDaemon
File Retention = 14 days# 30 days
Job Retention = 1 months# six months
AutoPrune = yes # Prune expired Jobs/Files
}
# Client (File Services) to backup
Client {
Name = ph-desktop1-fd
Address = ph-desktop1.DOMAIN.COM
FDPort = 9102
Catalog = MyCatalog
Password = asdfsadfdsafsdafasd # password for FileDaemon
File Retention = 30 days# 30 days
Job Retention = 6 months# six months
AutoPrune = yes # Prune expired Jobs/Files
}
# Client (File Services) to backup
Client {
Name = vir-desktop2-fd
Address = vir-desktop2.DOMAIN.COM
FDPort = 9102
Catalog = MyCatalog
Password = asdfsdfdsfsadfa/ # password for FileDaemon
File Retention = 30 days# 30 days
Job Retention = 6 months# six months
AutoPrune = yes # Prune expired Jobs/Files
}
Pool {
Name = Default
Pool Type = Backup
Recycle = yes # Bacula can automatically
recycle Volumes
AutoPrune = yes # Prune expired volumes
Volume Retention = 3 days # one year
Maximum Volume Jobs = 1
LabelFormat = File-
}
bacula-sd.conf:
Device {
Name = FileStorage
Media Type = File
Archive Device = /bacula-staging/backups
LabelMedia = yes # lets Bacula label unlabeled
media
Random Access = Yes;
AutomaticMount = yes; # when device opened, read it
RemovableMedia = no;
Maximum Network Buffer Size = 13107200
AlwaysOpen = no;
}
Thanks
--
Romer Ventura
--
The Palm PDK Hot Apps Program offers developers who use the
Plug-In Development Kit to bring their C/C++ apps to Palm for a share
of $1 Million in cash or HP Products. Visit us here for more details:
http://p.sf.net/sfu/dev2dev-palm
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
