phy-addr via dt
Hi, Is it possible to set default phy-addr for fec_imx driver via device tree or in barebox environment? ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
Re: phy-addr via dt
Hi Sascha, It works! Thanks! ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
[PATCH] commands: usb: drop help for force rescan option
From: Wjatscheslaw Stoljarski wjatscheslaw.stoljar...@kiwigrid.com Signed-off-by: Wjatscheslaw Stoljarski wjatscheslaw.stoljar...@kiwigrid.com --- commands/usb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/commands/usb.c b/commands/usb.c index a37d503..48c6619 100644 --- a/commands/usb.c +++ b/commands/usb.c @@ -138,7 +138,6 @@ BAREBOX_CMD_HELP_START(usb) BAREBOX_CMD_HELP_TEXT(Scan for USB devices.) BAREBOX_CMD_HELP_TEXT() BAREBOX_CMD_HELP_TEXT(Options:) -BAREBOX_CMD_HELP_OPT(-f, force rescan) BAREBOX_CMD_HELP_OPT(-s, show devices) BAREBOX_CMD_HELP_OPT(-t, show USB tree) BAREBOX_CMD_HELP_END @@ -146,7 +145,7 @@ BAREBOX_CMD_HELP_END BAREBOX_CMD_START(usb) .cmd= do_usb, BAREBOX_CMD_DESC((re-)detect USB devices) - BAREBOX_CMD_OPTS([-fts]) + BAREBOX_CMD_OPTS([-ts]) BAREBOX_CMD_GROUP(CMD_GRP_HWMANIP) BAREBOX_CMD_HELP(cmd_usb_help) BAREBOX_CMD_COMPLETE(empty_complete) -- 1.9.1 ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
boot command is broken?
Hi, after update to v2014.05.0 'boot -l' displays only one entry, although in /env/boot/ exists more files. Can anyone confirm this? Best regards, Wjatscheslaw Stoljarski ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
[PATCH 1/3] imx-spi: enable v0.7 spi driver for imx53-cspi
From: Wjatscheslaw Stoljarski wjatscheslaw.stoljar...@kiwigrid.com Signed-off-by: Wjatscheslaw Stoljarski wjatscheslaw.stoljar...@kiwigrid.com --- drivers/spi/Kconfig |2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 422693c..e429ea1 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -25,7 +25,7 @@ config DRIVER_SPI_IMX_0_0 config DRIVER_SPI_IMX_0_7 bool - depends on ARCH_IMX25 || ARCH_IMX35 + depends on ARCH_IMX25 || ARCH_IMX35 || ARCH_IMX53 default y config DRIVER_SPI_IMX_2_3 -- 1.7.9.5 ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
[PATCH 3/3] imx53: add imx53_add_cspi
From: Wjatscheslaw Stoljarski wjatscheslaw.stoljar...@kiwigrid.com
Signed-off-by: Wjatscheslaw Stoljarski wjatscheslaw.stoljar...@kiwigrid.com
---
arch/arm/mach-imx/include/mach/devices-imx53.h |5 +
1 file changed, 5 insertions(+)
diff --git a/arch/arm/mach-imx/include/mach/devices-imx53.h
b/arch/arm/mach-imx/include/mach/devices-imx53.h
index d4e9a4a..88be4fd 100644
--- a/arch/arm/mach-imx/include/mach/devices-imx53.h
+++ b/arch/arm/mach-imx/include/mach/devices-imx53.h
@@ -2,6 +2,11 @@
#include mach/devices.h
#include mach/imx53-regs.h
+static inline struct device_d *imx53_add_cspi(struct spi_imx_master *pdata)
+{
+ return imx_add_spi_imx35((void *)MX53_CSPI_BASE_ADDR, 0, pdata);
+}
+
static inline struct device_d *imx53_add_spi0(struct spi_imx_master *pdata)
{
return imx_add_spi_imx51((void *)MX53_ECSPI1_BASE_ADDR, 0, pdata);
--
1.7.9.5
___
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
Re: barebox on i.MX53 in serial downloader boot mode
Hi Sascha, On 11/05/2013 08:44 AM, Sascha Hauer wrote: Hi Wjatscheslaw, On Mon, Nov 04, 2013 at 12:56:57PM +0100, Wjatscheslaw Stoljarski (Slawa) wrote: Hi, has anyone tried to start barebox on i.MX53 in 11 boot mode (serial downloader)? I've tried on Freescale Loco board with pmic da9053, but without success. In 00 boot mode (internal boot) works perfectly. U-Boot works in both modes. DCD in u-boot and in barebox is the same. Even I can turn on LEDs with DCD in 11 boot mode on Loco. The imx-usb-loader tool generally works here. Yes, I can with the imx-usb-loader boot a u-boot image, but not barebox. I don't have a DA9053 based Loco here. It may be that there is some bug in the code preventing this board to run. May be. But I have the exact same result with a custom board that uses the MC34709VK PMIC. I just did a quick: git checkout master make imx_v7_defconfig cat images/barebox-freescale-imx53-loco.img /dev/sde The resulting SD card works here. Could you try booting from SD card? Does that work? In 00 boot mode it boots fine from SD and from USB. I just checked again. I have trouble with the 11 boot mode. Wjatscheslaw ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
barebox on i.MX53 in serial downloader boot mode
Hi, has anyone tried to start barebox on i.MX53 in 11 boot mode (serial downloader)? I've tried on Freescale Loco board with pmic da9053, but without success. In 00 boot mode (internal boot) works perfectly. U-Boot works in both modes. DCD in u-boot and in barebox is the same. Even I can turn on LEDs with DCD in 11 boot mode on Loco. Regards, Wjatscheslaw Stoljarski ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
Re: barebox on i.MX53 in serial downloader boot mode
On 11/04/2013 01:48 PM, Eric Bénard wrote: Hi, has anyone tried to start barebox on i.MX53 in 11 boot mode (serial downloader)? I've tried on Freescale Loco board with pmic da9053, but without success. In 00 boot mode (internal boot) works perfectly. U-Boot works in both modes. DCD in u-boot and in barebox is the same. Even I can turn on LEDs with DCD in 11 boot mode on Loco. works fine here, what are you using to download barebox ? I'm using imx-usb-loader. But I've tried MfgTool from Freescale too with the same result. Wjatscheslaw ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
Re: barebox on i.MX53 in serial downloader boot mode
On 11/04/2013 04:07 PM, Eric Bénard wrote: Hi Wjatscheslaw, Le Mon, 04 Nov 2013 16:00:49 +0100, Wjatscheslaw Stoljarski (Slawa) wjatscheslaw.stoljar...@kiwigrid.com a écrit : On 11/04/2013 01:48 PM, Eric Bénard wrote: Hi, has anyone tried to start barebox on i.MX53 in 11 boot mode (serial downloader)? I've tried on Freescale Loco board with pmic da9053, but without success. In 00 boot mode (internal boot) works perfectly. U-Boot works in both modes. DCD in u-boot and in barebox is the same. Even I can turn on LEDs with DCD in 11 boot mode on Loco. works fine here, what are you using to download barebox ? I'm using imx-usb-loader. But I've tried MfgTool from Freescale too with the same result. ok sorry it's working here (on a custom board) in 11 boot mode but using serial port to load it. IIRC USB was only tested in 00 as a fallback when NAND flash is blank. Eric Sorry, I forget to mention that I'm using serial downloader via USB. Hm... I've just tried to boot u-boot image in 11 mode, and from u-boot start barebox. And it's works. Why then can I not boot barebox directly? Wjatscheslaw ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
Re: barebox on i.MX53 in serial downloader boot mode
On 11/04/2013 05:06 PM, Eric Bénard wrote: Le Mon, 04 Nov 2013 17:04:46 +0100, Wjatscheslaw Stoljarski (Slawa) wjatscheslaw.stoljar...@kiwigrid.com a écrit : On 11/04/2013 04:07 PM, Eric Bénard wrote: Hi Wjatscheslaw, Le Mon, 04 Nov 2013 16:00:49 +0100, Wjatscheslaw Stoljarski (Slawa) wjatscheslaw.stoljar...@kiwigrid.com a écrit : On 11/04/2013 01:48 PM, Eric Bénard wrote: Hi, has anyone tried to start barebox on i.MX53 in 11 boot mode (serial downloader)? I've tried on Freescale Loco board with pmic da9053, but without success. In 00 boot mode (internal boot) works perfectly. U-Boot works in both modes. DCD in u-boot and in barebox is the same. Even I can turn on LEDs with DCD in 11 boot mode on Loco. works fine here, what are you using to download barebox ? I'm using imx-usb-loader. But I've tried MfgTool from Freescale too with the same result. ok sorry it's working here (on a custom board) in 11 boot mode but using serial port to load it. IIRC USB was only tested in 00 as a fallback when NAND flash is blank. Eric Sorry, I forget to mention that I'm using serial downloader via USB. Hm... I've just tried to boot u-boot image in 11 mode, and from u-boot start barebox. And it's works. Why then can I not boot barebox directly? maybe a clock which is left unitialized (or an IOMUX). Eric I've already tried to turn on all clocks mww 32 0x53FD4068 0x mww 32 0x53FD406c 0x mww 32 0x53FD4070 0x mww 32 0x53FD4074 0x mww 32 0x53FD4078 0x mww 32 0x53FD407c 0x mww 32 0x53FD4080 0x mww 32 0x53FD4084 0x but without success. Wjatscheslaw ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
[PATCH] MFD MC34708: Add dependence on SPI
From: Wjatscheslaw Stoljarski (Slawa) wjatscheslaw.stoljar...@kiwigrid.com MC34708 depend on I2C or SPI, so let driver depend on SPI too and rename config option name to MFD_MC34708. Signed-off-by: Wjatscheslaw Stoljarski wjatscheslaw.stoljar...@kiwigrid.com --- arch/arm/configs/freescale_mx53_loco_defconfig |2 +- drivers/mfd/Kconfig|4 ++-- drivers/mfd/Makefile |2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/configs/freescale_mx53_loco_defconfig b/arch/arm/configs/freescale_mx53_loco_defconfig index b61f0cf..fb6fcf8 100644 --- a/arch/arm/configs/freescale_mx53_loco_defconfig +++ b/arch/arm/configs/freescale_mx53_loco_defconfig @@ -79,7 +79,7 @@ CONFIG_USB_STORAGE=y CONFIG_MCI=y CONFIG_MCI_STARTUP=y CONFIG_MCI_IMX_ESDHC=y -CONFIG_I2C_MC34708=y +CONFIG_MFD_MC34708=y CONFIG_WATCHDOG=y CONFIG_WATCHDOG_IMX=y CONFIG_FS_TFTP=y diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 20eef86..a253de3 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -8,8 +8,8 @@ config I2C_MC34704 depends on I2C bool MC34704 PMIC driver -config I2C_MC34708 - depends on I2C +config MFD_MC34708 + depends on I2C || SPI bool MC34708 PMIC driver config I2C_MC9SDZ60 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 792ae2d..a242eaf 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -1,6 +1,6 @@ obj-$(CONFIG_MFD_MC13XXX) += mc13xxx.o obj-$(CONFIG_I2C_MC34704) += mc34704.o -obj-$(CONFIG_I2C_MC34708) += mc34708.o +obj-$(CONFIG_MFD_MC34708) += mc34708.o obj-$(CONFIG_I2C_MC9SDZ60) += mc9sdz60.o obj-$(CONFIG_I2C_LP3972) += lp3972.o obj-$(CONFIG_I2C_TWLCORE) += twl-core.o -- 1.7.9.5 ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
ethernet doesn't work after update to v2012.12.0
Hi All, after updating to the version 2012.12.0 ethernet doesn't work anymore. My system is iMX53, ethernet Interface: MII100. What could be the cause? devinfo output: ... ` imx_iim0 ` 0x-0x001f: /dev/imx_iim_bank0 ` 0x-0x001f: /dev/imx_iim_bank1 ` 0x-0x001f: /dev/imx_iim_bank2 ` 0x-0x001f: /dev/imx_iim_bank3 ` 0x-0x001f: /dev/imx_iim_bank4 ` 0x-0x001f: /dev/imx_iim_bank5 ` 0x-0x001f: /dev/imx_iim_bank6 ` 0x-0x001f: /dev/imx_iim_bank7 ... ` imx27-fec ` miibus0 ` eth0 ... imx_iim fec_imx Generic PHY ... Best Regards, Slawa ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
Re: [PATCH] Add JTAG bitbang driver
Hi, Sascha! On 07/25/2012 09:19 AM, Sascha Hauer wrote: How do you use this driver? From C code, or is there some command planned? I implement PSoC3 update, but with JTAG I have some trouble, what I haven't with SWD. Therefore much possible, that I will not use JTAG driver. But maybe somebody find it useful. Thank you for tips! Wjatscheslaw ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
[PATCH] ARM i.MX53: notify clocksource about changing clock
This fix a clock inaccuracy in get_time_ns (used by sleep, time, etc). At i.MX53 power-on GPT clock is typically 5550 Hz, and it will be used to calc the clock multiplier. After call imx53_init_lowlevel() GPT clock will changed (e.g. to Hz), but multiplier not. To fix this behavior call clock_notifier_call_chain() after changing clock in imx53_init_lowlevel(). Signed-off-by: Wjatscheslaw Stoljarski wjatscheslaw.stoljar...@kiwigrid.com --- arch/arm/mach-imx/imx53.c |3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-imx/imx53.c b/arch/arm/mach-imx/imx53.c index e20b60a..3359819 100644 --- a/arch/arm/mach-imx/imx53.c +++ b/arch/arm/mach-imx/imx53.c @@ -18,6 +18,7 @@ #include init.h #include common.h #include io.h +#include notifier.h #include sizes.h #include mach/imx5.h #include mach/imx-regs.h @@ -211,4 +212,6 @@ void imx53_init_lowlevel(unsigned int cpufreq_mhz) writel(0x, ccm + MX53_CCM_CCGR7); writel(0, ccm + MX5_CCM_CCDR); + + clock_notifier_call_chain(); } -- 1.7.9.5 ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
[PATCH] i.MX53 boards: notify clocksource after init_lowlevel
From 4d9a8e960654c02205cf4a8e47b4e86cac4b2a95 Mon Sep 17 00:00:00 2001
From: Wjatscheslaw Stoljarski wjatscheslaw.stoljar...@kiwigrid.com
Date: Mon, 23 Jul 2012 13:48:07 +0200
Subject: [PATCH] i.MX53 boards: notify clocksource after init_lowlevel
This fix a clock inaccuracy in get_time_ns (used by sleep, time, etc).
Signed-off-by: Wjatscheslaw Stoljarski wjatscheslaw.stoljar...@kiwigrid.com
---
arch/arm/boards/freescale-mx53-loco/board.c |2 ++
arch/arm/boards/freescale-mx53-smd/board.c |2 ++
arch/arm/boards/tqma53/board.c |2 ++
3 files changed, 6 insertions(+)
diff --git a/arch/arm/boards/freescale-mx53-loco/board.c b/arch/arm/boards/freescale-mx53-loco/board.c
index 0d71555..b8e8d24 100644
--- a/arch/arm/boards/freescale-mx53-loco/board.c
+++ b/arch/arm/boards/freescale-mx53-loco/board.c
@@ -22,6 +22,7 @@
#include init.h
#include nand.h
#include net.h
+#include notifier.h
#include partition.h
#include sizes.h
@@ -215,6 +216,7 @@ static int loco_console_init(void)
mxc_iomux_v3_setup_multiple_pads(loco_pads, ARRAY_SIZE(loco_pads));
imx53_init_lowlevel(1000);
+ clock_notifier_call_chain();
imx53_add_uart0();
return 0;
diff --git a/arch/arm/boards/freescale-mx53-smd/board.c b/arch/arm/boards/freescale-mx53-smd/board.c
index 0483103..74b38bd 100644
--- a/arch/arm/boards/freescale-mx53-smd/board.c
+++ b/arch/arm/boards/freescale-mx53-smd/board.c
@@ -22,6 +22,7 @@
#include init.h
#include nand.h
#include net.h
+#include notifier.h
#include partition.h
#include sizes.h
@@ -161,6 +162,7 @@ static int smd_console_init(void)
mxc_iomux_v3_setup_multiple_pads(smd_pads, ARRAY_SIZE(smd_pads));
imx53_init_lowlevel(1000);
+ clock_notifier_call_chain();
imx53_add_uart0();
imx53_add_uart1();
diff --git a/arch/arm/boards/tqma53/board.c b/arch/arm/boards/tqma53/board.c
index 8c3d855..c4837cb 100644
--- a/arch/arm/boards/tqma53/board.c
+++ b/arch/arm/boards/tqma53/board.c
@@ -21,6 +21,7 @@
#include init.h
#include nand.h
#include net.h
+#include notifier.h
#include partition.h
#include sizes.h
#include mci.h
@@ -265,6 +266,7 @@ static int tqma53_console_init(void)
{
mxc_iomux_v3_setup_multiple_pads(tqma53_pads, ARRAY_SIZE(tqma53_pads));
imx53_init_lowlevel(800);
+ clock_notifier_call_chain();
imx53_add_uart0();
return 0;
--
1.7.9.5
___
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
