Hello, I'm using the PRU, and I have found out that the maximum frequency for a PRU clock is 66 Mhz (or 50Mhz if the duty cycle is at 50%). In the PRU TRM, the data sheet told us that the clock of the PRU is at 200MHz.
So ma question is : Is there a way to push out on a PIN a 200MHz ( or a clock frequency > 66 MHz) on the BeagleBone Black ? If so have you an example on how to do so ? In addition, I would like to known what is the maximum frequency that I can reach to read a PIN value (GPIO PIN and PRU dedicated PIN) ? If eventually you know a good example who read data and load them into a register I will be pleased to hear about it ;-) Thanks by advance Regards Vincent "Enjoy life no matter what !" -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f80326dc-6460-465b-8593-e76f7e520398%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
