[BlindHandyMan] Quick Step Floating Flooring

2010-05-09 Thread Ray Boyce
Hi All

We are about to have put down  in our lounge hall dining and kitchen areas
46 square metres of quick step white ash floating flooring.

This white ash colour is deceptive because it is not white as the colour
suggests.

What I have to do is remove all furniture carpets underlay and vinyl and all
mouldings around the walls at floor level.

I might have to remove the ply under the vinyl also but until I remove the
carpet and vinyl and have a feel at the difference in height I am not sure
just yet.

Then remove the carpet tension hooks around the walls so the floating floor
can fit up to the sheet rock.

I also have to remove the dishwasher for the flooring goes under this as
well as the refrigerator.

Then after the floor goes in  put back on the floor moulding.

The difficult part is removing this wood moulding without damaging it for it
is nailed on and we have to reuse it.

I am going to screw it back on so if I have to remove it to replace any
damaged sections in the future this process will be a little easier.

Where the flooring buts up to the kicks in the kitchen we are going to stain
the moulding the same colour as the kicks.

We have to then put on stick on felt pads on the bottoms of all chairs and
furniture so damage from usage  is kept   as low  as possible.

So there is plenty of work ahead.

I have included the URL for those who would like to read up on this
flooring.

http://www.quick-step.com/



[Non-text portions of this message have been removed]



Re: [BlindHandyMan] Quick Step Floating Flooring

2010-05-09 Thread clifford
Dear Ray:
We put down laminate flooring in our kitchen and din  two months ago, and 
the most difficult 
 problem we had was working around the door trim, as removing it all together 
was not practical.  We ended up using a thin hand saw and laying it on top of a 
piece of the flooring and then cutting off the bottom end of the trim.  It was 
still a bear  of a job.  We found out quickly that the laminate flooring will 
not stand up to chairs sliding, unless plenty of felt is applied to the bottom 
of the chairs.  This notion to replace our plush warm carpet, in the din, and 
solid vinyl  in the kitchen, was entirely the idea of the first wife.  
Good luck with your project.  
Yours Truly,

Clifford Wilson
- Original Message - 
From: Ray Boyce 
To: blindhandyman@yahoogroups.com 
Sent: Sunday, May 09, 2010 6:29 PM
Subject: [BlindHandyMan] Quick Step Floating Flooring


  
Hi All

We are about to have put down in our lounge hall dining and kitchen areas
46 square metres of quick step white ash floating flooring.

This white ash colour is deceptive because it is not white as the colour
suggests.

What I have to do is remove all furniture carpets underlay and vinyl and all
mouldings around the walls at floor level.

I might have to remove the ply under the vinyl also but until I remove the
carpet and vinyl and have a feel at the difference in height I am not sure
just yet.

Then remove the carpet tension hooks around the walls so the floating floor
can fit up to the sheet rock.

I also have to remove the dishwasher for the flooring goes under this as
well as the refrigerator.

Then after the floor goes in put back on the floor moulding.

The difficult part is removing this wood moulding without damaging it for it
is nailed on and we have to reuse it.

I am going to screw it back on so if I have to remove it to replace any
damaged sections in the future this process will be a little easier.

Where the flooring buts up to the kicks in the kitchen we are going to stain
the moulding the same colour as the kicks.

We have to then put on stick on felt pads on the bottoms of all chairs and
furniture so damage from usage is kept as low as possible.

So there is plenty of work ahead.

I have included the URL for those who would like to read up on this
flooring.

http://www.quick-step.com/

[Non-text portions of this message have been removed]





__ Information from ESET NOD32 Antivirus, version of virus signature 
database 5099 (20100509) __

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__ Information from ESET NOD32 Antivirus, version of virus signature 
database 5099 (20100509) __

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



[Non-text portions of this message have been removed]