date:20220531

Re: [BVARC] Fixing a stripped aluminum screw hole

2022-05-31 Thread Larry Brand via BVARC

  Could try pipe thread tape  . Or this paint on fingers might be like
a glue . Larry Brand kb5pnu .

On Tue, May 31, 2022 at 11:29 PM Mark Brantana via BVARC 
wrote:

> Here's a question everyone is likely to encounter at some time, and I am
> hoping someone has an answer. There are tiny screws holding the back of my
> macbook air. The pentalobe size is 1.2, and the screw shaft size appears to
> be around 0.75 mm. The screw appears to be stainless steel, and the case
> appears to be aluminum. The screw appears to be fine, but the hole is
> stripped. Does anyone have a solution for properly and permanently fixing
> the hole?
> Mark
> N5PRD
>
> 
> Brazos Valley Amateur Radio Club
>
> BVARC mailing list
> BVARC@bvarc.org
> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
> Publicly available archives are available here:
> https://www.mail-archive.com/bvarc@bvarc.org/
>

Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

Re: [BVARC] Fixing a stripped aluminum screw hole

2022-05-31 Thread orin snook via BVARC

Depending on the amount of "stripping", you can make the "hole" smaller with 
aluminum foil or small strips placed perpendicular to the threads in the hole. 
LokTite for more security.

2. Use copper, strands of Brillo pad or similar wire, depending again on the 
tolerance you are trying to close.

3. Wrap the screw threads with "oakum" - hemp fibers filling the male screw 
threads themselves. Used as a method of pipe doping to get a seal with sloppy 
threads. Old method, but makes serious pressure sealing. Cotton ball with 
LokTite may be sufficient.

4. JB Weld?? Several adhesives/epoxy used on the boat should work.

Red or Blue LokTite depending if you want it apart anytime soon.

73 & GL
KB5F/mm
orin

From: BVARC  on behalf of Mark Brantana via BVARC 

Sent: Tuesday, May 31, 2022 11:28 PM
To: bvarc@bvarc.org 
Cc: Mark Brantana 
Subject: [BVARC] Fixing a stripped aluminum screw hole

Here's a question everyone is likely to encounter at some time, and I am hoping 
someone has an answer. There are tiny screws holding the back of my macbook 
air. The pentalobe size is 1.2, and the screw shaft size appears to be around 
0.75 mm. The screw appears to be stainless steel, and the case appears to be 
aluminum. The screw appears to be fine, but the hole is stripped. Does anyone 
have a solution for properly and permanently fixing the hole?
Mark
N5PRD


Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

[BVARC] Fixing a stripped aluminum screw hole

2022-05-31 Thread Mark Brantana via BVARC

Here's a question everyone is likely to encounter at some time, and I am hoping 
someone has an answer. There are tiny screws holding the back of my macbook 
air. The pentalobe size is 1.2, and the screw shaft size appears to be around 
0.75 mm. The screw appears to be stainless steel, and the case appears to be 
aluminum. The screw appears to be fine, but the hole is stripped. Does anyone 
have a solution for properly and permanently fixing the hole?
Mark
N5PRD


Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

Re: [BVARC] QuestionAIR Net Today at 7 PM!

2022-05-31 Thread W7QAG via BVARC

Hey Charlotte, Just way end to say great job tonight. Obscure questions to say 
the keast. But very fun and thought provoking . We need more of that. Keep up 
the great work th as t you and Henry are doing. A welcome and refreshing change 
to the norm.Mike.W7QAGSent from my T-Mobile 4G LTE Device
 Original message From: Charlotte KI5TRQ via BVARC 
 Date: 5/31/22  17:48  (GMT-06:00) To: BRAZOS VALLEY AMATEUR 
RADIO CLUB  Cc: Charlotte KI5TRQ  
Subject: [BVARC] QuestionAIR Net Today at 7 PM! Hello everyone!Just a quick 
reminder that the QuestionAIR Net has been moved to 7 PM this Tuesday and all 
following Tuesdays to avoid conflict with some of the other nets.This net is 
run on the 146.940 repeater and I will be serving as Net Control Station 
tonight. All hams are welcome to join in.We hope to hear you check in 
tonight!-- CharlotteKI5TRQ

Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

[BVARC] QuestionAIR Net Today at 7 PM!

2022-05-31 Thread Charlotte KI5TRQ via BVARC

Hello everyone!

Just a quick reminder that the QuestionAIR Net has been moved to 7 PM this
Tuesday and all following Tuesdays to avoid conflict with some of the other
nets.

This net is run on the 146.940 repeater and I will be serving as Net
Control Station tonight. All hams are welcome to join in.

We hope to hear you check in tonight!

-- 
Charlotte
KI5TRQ

Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

Re: [BVARC] Museum Ships Weekend Event -Friday June 3rd to Saturday June 4th

2022-05-31 Thread K5BOU via BVARC

I'm willing to help.
Philippe- K5BOU

> On May 31, 2022, at 3:42 PM, K5IZO via BVARC  wrote:
> 
> I will be there for setup and some ops.  I will depart maybe 8PM.
> 
> Do you have a time of arrival for setup?  Any provisions needed?
> 
> I assume there will be a feed, maybe 7 ish.
> 
> JOHN, K5IZO 
> 
> Sent from my iPhone
> 
>> On May 31, 2022, at 2:37 PM, mark janzer via BVARC  wrote:
>> 
>> Club
>> 
>> BVARC mailing list
>> BVARC@bvarc.org
>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
>> Publicly available archives are available here: https://www
> 
> 
> Brazos Valley Amateur Radio Club
> 
> BVARC mailing list
> BVARC@bvarc.org
> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
> Publicly available archives are available here: 
> https://www.mail-archive.com/bvarc@bvarc.org/ 



Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

Re: [BVARC] Museum Ships Weekend Event -Friday June 3rd to Saturday June 4th

2022-05-31 Thread K5IZO via BVARC

I will be there for setup and some ops.  I will depart maybe 8PM.

Do you have a time of arrival for setup?  Any provisions needed?

I assume there will be a feed, maybe 7 ish.

JOHN, K5IZO 

Sent from my iPhone

> On May 31, 2022, at 2:37 PM, mark janzer via BVARC  wrote:
> 
> Club
> 
> BVARC mailing list
> BVARC@bvarc.org
> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
> Publicly available archives are available here: https://www


Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

Re: [BVARC] EFHW antenna kit that ARRL sales

2022-05-31 Thread Mike Eason via BVARC

Hi guys please take me off this string. Thx

Mike A. Eason
Lynn Kiecke Lackey & Eason
Insurance Group, Inc. 


> On May 31, 2022, at 1:07 PM, Jonathan Guthrie, KA8KPN via BVARC 
>  wrote:
> 
> I actually bought that kit, but I've yet to put it together.
> 
>> On 5/31/2022 12:54 PM, JP Pritchard via BVARC wrote:
>> Randy, I built an EFHW antenna from parts I gathered and it works well, but 
>> I am familiar with the ARRL kit and I think it includes everything you’ll 
>> need. First project? A kit is a great way to go.
>> JP K5JPP
>> 
>> Sent from my iPhone
>> 
 On May 31, 2022, at 12:23 PM, Rudolph Ackerman via BVARC  
 wrote:
>>> 
>>> What are your thought's on the EFHW antenna kit that ARRL sales. This will 
>>> be my first HF antenna and I would like to build it my self.
>>> 
>>> Cost is $69.00 from the ARRL.
>>> 
>>> This is a kit by HF Kits out of the UK. This kit is the 4 band version (40, 
>>> 20, 15 and 10) with a 66 foot wire run. I have been looking at sourcing the 
>>> parts my self, but from what I have found I would have to buy the parts 
>>> from several different places, so with trying to find every thing, and the 
>>> shipping cost it's just easier and cheaper to just order this kit.
>>> 
>>> Who know's if I build it and get it up with good SWR reading's I might even 
>>> buy a HF radio.
>>> 
>>> Rudy Ackerman
>>> KF5QYG
>>> 
>>> 
>>> Brazos Valley Amateur Radio Club
>>> 
>>> BVARC mailing list
>>> BVARC@bvarc.org
>>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
>>> Publicly available archives are available here: 
>>> https://www.mail-archive.com/bvarc@bvarc.org/
>> 
>> 
>> Brazos Valley Amateur Radio Club
>> 
>> BVARC mailing list
>> BVARC@bvarc.org
>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
>> Publicly available archives are available here: 
>> https://www.mail-archive.com/bvarc@bvarc.org/
> 
> 
> Brazos Valley Amateur Radio Club
> 
> BVARC mailing list
> BVARC@bvarc.org
> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
> Publicly available archives are available here: 
> https://www.mail-archive.com/bvarc@bvarc.org/ 


Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

Re: [BVARC] Museum Ships Weekend Event -Friday June 3rd to Saturday June 4th

2022-05-31 Thread Mike Eason via BVARC

I hope to attend either Friday afternoon or Saturday morning.  

Mike A. Eason

Sent from my iPad

> On May 31, 2022, at 2:37 PM, mark janzer via BVARC  wrote:
> 
> 
> We're only operating Friday afternoon through Saturday early afternoon. 
> The Museum has other activities on Saturday overnight through Sunday morning 
> that preclude our use.
> BVARC is paying a flat fee to the museum, for the event. 
> This enables a staff member to be present while we're aboard.
> 
> Overnight berthing requires a fee of $25 per person (Museum policy).
> If you are on board for overnight radio ops, the berthing fee will apply.
> 
> You do not need to pay a berthing fee to attend, as long as you're not 
> staying overnight.
> 
> We arrive Friday afternoon, set-up in the galley and the Stewart radio room.
> We clean-up and vacate the galley area by 2pm on Saturday.
> 
> To participate - respond to this email with your plans to attend.
> I'll then be able to add you to the list of participants for "free" entry 
> into the park.
> 
> 73
> Mark
> K5MGJ
> 
> Brazos Valley Amateur Radio Club
> 
> BVARC mailing list
> BVARC@bvarc.org
> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
> Publicly available archives are available here: 
> https://www.mail-archive.com/bvarc@bvarc.org/ 

Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

[BVARC] Bob Heil presentation on YouTube

2022-05-31 Thread Jeff Greer via BVARC

https://youtu.be/42ltVGztZmU
[https://i.ytimg.com/vi/42ltVGztZmU/hqdefault.jpg]
Spellbinding Stories & Sound Science with Bob Heil K9EID, BVARC May 
2022
youtu.be


Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

[BVARC] Museum Ships Weekend Event -Friday June 3rd to Saturday June 4th

2022-05-31 Thread mark janzer via BVARC

We're only operating Friday afternoon through Saturday early afternoon. The 
Museum has other activities on Saturday overnight through Sunday morning that 
preclude our use.BVARC is paying a flat fee to the museum, for the event. This 
enables a staff member to be present while we're aboard.
Overnight berthing requires a fee of $25 per person (Museum policy).If you are 
on board for overnight radio ops, the berthing fee will apply.
You do not need to pay a berthing fee to attend, as long as you're not staying 
overnight.
We arrive Friday afternoon, set-up in the galley and the Stewart radio room.We 
clean-up and vacate the galley area by 2pm on Saturday.
To participate - respond to this email with your plans to attend.I'll then be 
able to add you to the list of participants for "free" entry into the park.
73MarkK5MGJ
Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

Re: [BVARC] EFHW antenna kit that ARRL sales

2022-05-31 Thread Jonathan Guthrie, KA8KPN via BVARC

I actually bought that kit, but I've yet to put it together.

On 5/31/2022 12:54 PM, JP Pritchard via BVARC wrote:

Randy, I built an EFHW antenna from parts I gathered and it works well, but I
am familiar with the ARRL kit and I think it includes everything you’ll need.
First project? A kit is a great way to go.
JP K5JPP

Sent from my iPhone

On May 31, 2022, at 12:23 PM, Rudolph Ackerman via BVARC
wrote:

What are your thought's on the EFHW antenna kit that ARRL sales. This will be
my first HF antenna and I would like to build it my self.

Cost is $69.00 from the ARRL.

This is a kit by HF Kits out of the UK. This kit is the 4 band version (40, 20,
15 and 10) with a 66 foot wire run. I have been looking at sourcing the parts
my self, but from what I have found I would have to buy the parts from several
different places, so with trying to find every thing, and the shipping cost
it's just easier and cheaper to just order this kit.

Who know's if I build it and get it up with good SWR reading's I might even buy
a HF radio.

Rudy Ackerman
KF5QYG

Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here:
https://www.mail-archive.com/bvarc@bvarc.org/

Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here:
https://www.mail-archive.com/bvarc@bvarc.org/

Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: https://www.mail-archive.com/bvarc@bvarc.org/

Re: [BVARC] EFHW antenna kit that ARRL sales

2022-05-31 Thread JP Pritchard via BVARC

Randy, I built an EFHW antenna from parts I gathered and it works well, but I 
am familiar with the ARRL kit and I think it includes everything you’ll need. 
First project? A kit is a great way to go. 
JP K5JPP 

Sent from my iPhone

> On May 31, 2022, at 12:23 PM, Rudolph Ackerman via BVARC  
> wrote:
> 
> What are your thought's on the EFHW antenna kit that ARRL sales. This will 
> be my first HF antenna and I would like to build it my self.
> 
> Cost is $69.00 from the ARRL.
> 
> This is a kit by HF Kits out of the UK. This kit is the 4 band version (40, 
> 20, 15 and 10) with a 66 foot wire run. I have been looking at sourcing the 
> parts my self, but from what I have found I would have to buy the parts from 
> several different places, so with trying to find every thing, and the 
> shipping cost it's just easier and cheaper to just order this kit.
> 
> Who know's if I build it and get it up with good SWR reading's I might even 
> buy a HF radio.
> 
> Rudy Ackerman 
> KF5QYG
> 
> 
> Brazos Valley Amateur Radio Club
> 
> BVARC mailing list
> BVARC@bvarc.org
> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
> Publicly available archives are available here: 
> https://www.mail-archive.com/bvarc@bvarc.org/ 



Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

[BVARC] EFHW antenna kit that ARRL sales

2022-05-31 Thread Rudolph Ackerman via BVARC

What are your thought's on the EFHW antenna kit that ARRL sales. This will be 
my first HF antenna and I would like to build it my self.

Cost is $69.00 from the ARRL.

This is a kit by HF Kits out of the UK. This kit is the 4 band version (40, 20, 
15 and 10) with a 66 foot wire run. I have been looking at sourcing the parts 
my self, but from what I have found I would have to buy the parts from several 
different places, so with trying to find every thing, and the shipping cost 
it's just easier and cheaper to just order this kit.

Who know's if I build it and get it up with good SWR reading's I might even buy 
a HF radio.

Rudy Ackerman 
KF5QYG


Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

Re: [BVARC] headset for HTs TYT TH-350 and Baofeng UV-5 (2 pin Kenwood)

2022-05-31 Thread Mike Eason via BVARC

Sorry don’t know about headset etc. Think u added me by mistake 

Mike A. Eason



> On May 31, 2022, at 9:52 AM, Donald Glenn via BVARC  wrote:
> 
> 
> I havea head set for the Baofeng that you may have.
> 73
> Don W4LDN
> 
>> On Tue, May 31, 2022 at 8:19 AM Joseph Benoit via BVARC  
>> wrote:
>> That IS the handset I mentioned; when configured as dual headset with 2-pin 
>> (Kenwood stle) the part number becomes HTH-K
>> 
>>> On Mon, May 30, 2022 at 8:47 PM Mike Lambert via BVARC  
>>> wrote:
>>> Thank you Joseph! I found a great headset at:
>>> 
>>> https://heilhamradio.com/product/handie-talkie-headset-hth-2/
>>> 
>>> 73s !!
>>> Mike  KI5MIK
>>> 
>>> On 5/30/2022 7:37 PM, Joseph Benoit via BVARC wrote:
 Thought I'd buy a good brand but found the Heil HTH-K has great receiver 
 audio; mike quality is good but transmit audio was a bit down unless you 
 place the mike VERY close to your mouth. Same on both my BF-FHP and GT-5R. 
  
 
 On Mon, May 30, 2022 at 7:08 PM Mike Lambert via BVARC  
 wrote:
> I'm shopping for a headset for HTs   TYT TH-350 and Baofeng UV-5 (2 pin 
> Kenwood)
> 
> Does anyone have any suggestions?
> 
> 73s
> 
> Mike  KI5MIK
> 
> 
> 
> 
> Brazos Valley Amateur Radio Club
> 
> BVARC mailing list
> BVARC@bvarc.org
> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
> Publicly available archives are available here: 
> https://www.mail-archive.com/bvarc@bvarc.org/ 
 
 
 
 Brazos Valley Amateur Radio Club
 
 BVARC mailing list
 BVARC@bvarc.org
 http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
 Publicly available archives are available here: 
 https://www.mail-archive.com/bvarc@bvarc.org/ 
>>> 
>>> Brazos Valley Amateur Radio Club
>>> 
>>> BVARC mailing list
>>> BVARC@bvarc.org
>>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
>>> Publicly available archives are available here: 
>>> https://www.mail-archive.com/bvarc@bvarc.org/ 
>> 
>> Brazos Valley Amateur Radio Club
>> 
>> BVARC mailing list
>> BVARC@bvarc.org
>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
>> Publicly available archives are available here: 
>> https://www.mail-archive.com/bvarc@bvarc.org/ 
> 
> Brazos Valley Amateur Radio Club
> 
> BVARC mailing list
> BVARC@bvarc.org
> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
> Publicly available archives are available here: 
> https://www.mail-archive.com/bvarc@bvarc.org/ 

Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

Re: [BVARC] headset for HTs TYT TH-350 and Baofeng UV-5 (2 pin Kenwood)

2022-05-31 Thread Donald Glenn via BVARC

I havea head set for the Baofeng that you may have.
73
Don W4LDN

On Tue, May 31, 2022 at 8:19 AM Joseph Benoit via BVARC 
wrote:

> That IS the handset I mentioned; when configured as dual headset with
> 2-pin (Kenwood stle) the part number becomes HTH-K
>
> On Mon, May 30, 2022 at 8:47 PM Mike Lambert via BVARC 
> wrote:
>
>> Thank you Joseph! I found a great headset at:
>>
>> https://heilhamradio.com/product/handie-talkie-headset-hth-2/
>>
>> 73s !!
>> Mike  KI5MIK
>> On 5/30/2022 7:37 PM, Joseph Benoit via BVARC wrote:
>>
>> Thought I'd buy a good brand but found the Heil HTH-K has great receiver
>> audio; mike quality is good but transmit audio was a bit down unless you
>> place the mike VERY close to your mouth. Same on both my BF-FHP and GT-5R.
>>
>> On Mon, May 30, 2022 at 7:08 PM Mike Lambert via BVARC 
>> wrote:
>>
>>> I'm shopping for a headset for HTs   TYT TH-350 and Baofeng UV-5 (2 pin
>>> Kenwood)
>>>
>>> Does anyone have any suggestions?
>>>
>>> 73s
>>>
>>> Mike  KI5MIK
>>>
>>>
>>>
>>> 
>>> Brazos Valley Amateur Radio Club
>>>
>>> BVARC mailing list
>>> BVARC@bvarc.org
>>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
>>> Publicly available archives are available here:
>>> https://www.mail-archive.com/bvarc@bvarc.org/
>>>
>>
>> 
>> Brazos Valley Amateur Radio Club
>>
>> BVARC mailing 
>> listBVARC@bvarc.orghttp://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
>> Publicly available archives are available here: 
>> https://www.mail-archive.com/bvarc@bvarc.org/
>>
>> 
>> Brazos Valley Amateur Radio Club
>>
>> BVARC mailing list
>> BVARC@bvarc.org
>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
>> Publicly available archives are available here:
>> https://www.mail-archive.com/bvarc@bvarc.org/
>>
> 
> Brazos Valley Amateur Radio Club
>
> BVARC mailing list
> BVARC@bvarc.org
> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
> Publicly available archives are available here:
> https://www.mail-archive.com/bvarc@bvarc.org/
>

Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

Re: [BVARC] headset for HTs TYT TH-350 and Baofeng UV-5 (2 pin Kenwood)

2022-05-31 Thread Joseph Benoit via BVARC

That IS the handset I mentioned; when configured as dual headset with 2-pin
(Kenwood stle) the part number becomes HTH-K

On Mon, May 30, 2022 at 8:47 PM Mike Lambert via BVARC 
wrote:

> Thank you Joseph! I found a great headset at:
>
> https://heilhamradio.com/product/handie-talkie-headset-hth-2/
>
> 73s !!
> Mike  KI5MIK
> On 5/30/2022 7:37 PM, Joseph Benoit via BVARC wrote:
>
> Thought I'd buy a good brand but found the Heil HTH-K has great receiver
> audio; mike quality is good but transmit audio was a bit down unless you
> place the mike VERY close to your mouth. Same on both my BF-FHP and GT-5R.
>
> On Mon, May 30, 2022 at 7:08 PM Mike Lambert via BVARC 
> wrote:
>
>> I'm shopping for a headset for HTs   TYT TH-350 and Baofeng UV-5 (2 pin
>> Kenwood)
>>
>> Does anyone have any suggestions?
>>
>> 73s
>>
>> Mike  KI5MIK
>>
>>
>>
>> 
>> Brazos Valley Amateur Radio Club
>>
>> BVARC mailing list
>> BVARC@bvarc.org
>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
>> Publicly available archives are available here:
>> https://www.mail-archive.com/bvarc@bvarc.org/
>>
>
> 
> Brazos Valley Amateur Radio Club
>
> BVARC mailing 
> listBVARC@bvarc.orghttp://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
> Publicly available archives are available here: 
> https://www.mail-archive.com/bvarc@bvarc.org/
>
> 
> Brazos Valley Amateur Radio Club
>
> BVARC mailing list
> BVARC@bvarc.org
> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
> Publicly available archives are available here:
> https://www.mail-archive.com/bvarc@bvarc.org/
>

Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/

Re: [BVARC] Fixing a stripped aluminum screw hole

Re: [BVARC] Fixing a stripped aluminum screw hole

[BVARC] Fixing a stripped aluminum screw hole

Re: [BVARC] QuestionAIR Net Today at 7 PM!

[BVARC] QuestionAIR Net Today at 7 PM!

Re: [BVARC] Museum Ships Weekend Event -Friday June 3rd to Saturday June 4th

Re: [BVARC] Museum Ships Weekend Event -Friday June 3rd to Saturday June 4th

Re: [BVARC] EFHW antenna kit that ARRL sales

Re: [BVARC] Museum Ships Weekend Event -Friday June 3rd to Saturday June 4th

[BVARC] Bob Heil presentation on YouTube

[BVARC] Museum Ships Weekend Event -Friday June 3rd to Saturday June 4th

Re: [BVARC] EFHW antenna kit that ARRL sales

Re: [BVARC] EFHW antenna kit that ARRL sales

[BVARC] EFHW antenna kit that ARRL sales

Re: [BVARC] headset for HTs TYT TH-350 and Baofeng UV-5 (2 pin Kenwood)

Re: [BVARC] headset for HTs TYT TH-350 and Baofeng UV-5 (2 pin Kenwood)

Re: [BVARC] headset for HTs TYT TH-350 and Baofeng UV-5 (2 pin Kenwood)

17 matches

Site Navigation

Mail list logo

Footer information