Re: [Cambium-users] ePMP 2000 GPS not working after firmware upgrade

2018-02-09 Thread Matt Mangriotis via Cambium-users 
Craig – Thanks for posting your follow up experience on this issue… I 
appreciate reading that our support team was able to help you resolve this 
issue.

Matt

From: cambium-users-boun...@wispa.org [mailto:cambium-users-boun...@wispa.org] 
On Behalf Of Craig Oliver
Sent: Thursday, February 8, 2018 6:08 PM
To: Cambium Networks User Group 
Subject: Re: [Cambium-users] ePMP 2000 GPS not working after firmware upgrade

To be specific, Dave Smudde connected to a remote desktop session and went 
through the radio configuration with me and made suggestions on items to 
change. I performed the changes and his suggestions proved to be a positive 
resolution.
Best Regards,

Craig Oliver
President
WavSpeed Inc
cr...@wavspeed.com
(469) 844-3024 ext. 8111
(469) 951-6900 Cell
www.WavSpeed.com

On Feb 8, 2018, at 6:02 PM, RickG 
mailto:rgunder...@gmail.com>> wrote:
Just a follow up. Cambium support logged into my radio and fixed it.

On Thu, Feb 1, 2018 at 3:30 PM, Nick Bright 
mailto:nick.bri...@valnet.net>> wrote:
On 1/30/2018 5:10 PM, Sakid Ahmed via Cambium-users wrote:
Unfortunately, we don’t have an internal switch to flip the connection. We have 
a way to communicate with the GPS chip and are looking at ways to address this 
in SW.
As for the question on the hold off timer, that just allows the AP to operate 
(without shutting of Tx) without a GPS signal during the holdoff timer.

Sakid
Could this issue have caused intermittent disconnects for subsets of customers? 
After upgrading to 3.5.1 we had a large segment of customers have problems with 
dropping wireless association in sync with each other (e.g. they all dropped 
and came back at the same time), and it was repeatably the same customers, on 
three different towers across six sectors.





--

---

-  Nick Bright-

-  Vice President of Technology   -

-  Valnet -=- We Connect You -=-  -

-  Tel 888-332-1616 x 315 / Fax 620-331-0789  -

-  Web 
http://www.valnet.net/
 -

---

- Are your files safe?-

- Valnet Vault - Secure Cloud Backup  -

- More information & 30 day free trial at -

- 
http://www.valnet.net/services/valnet-vault
 -

---

___
Cambium-users mailing list
Cambium-users@wispa.org
http://lists.wispa.org/mailman/listinfo/cambium-users



--
-RickG
___
Cambium-users mailing list
Cambium-users@wispa.org
http://lists.wispa.org/mailman/listinfo/cambium-users
___
Cambium-users mailing list
Cambium-users@wispa.org
http://lists.wispa.org/mailman/listinfo/cambium-users

[Cambium-users] Field Service Bulletin for PMP 450

2017-06-12 Thread Matt Mangriotis via Cambium-users 
Just wanted to let folks know we found an issue with some PMP 450 SM (and PTP 
450) radios.  There may be cases where the license key is not functioning as it 
should.

I have attached the FSB, and also here is a link to the forum post: 
http://community.cambiumnetworks.com/t5/PMP-Known-Issues/Field-Service-Bulletin-FSB-PMP-450-Incorrectly-Keyed/m-p/74037#M28

Good news is that it's easily fixed by applying the key again, and customer 
support knows about the issue and is ready to help.

Sorry for any pain this causes.

Matt

___
Cambium-users mailing list
Cambium-users@wispa.org
http://lists.wispa.org/mailman/listinfo/cambium-users

Re: [Cambium-users] PMP 450i

2017-05-05 Thread Matt Mangriotis via Cambium-users 
Christian - The 450i has only been around a couple of years... surprised to 
hear you say it was working for 5 years on that channel.

In any case, it's really hard to tell what might be going on there.  If it's 
under warranty, I would suggest you open a support case.  That will get you the 
quickest action on something like this.

Matt

From: cambium-users-boun...@wispa.org [mailto:cambium-users-boun...@wispa.org] 
On Behalf Of Christian Palecek
Sent: Friday, May 5, 2017 2:52 PM
To: Ray Savich ; 'Cambium Networks User Group' 

Subject: Re: [Cambium-users] PMP 450i

Thank You Ray,

We don't have a spare 450i at this time otherwise I would just switch it to 
verify.

Thanks,


Christian Palecek
Chief Operations Officer
Cybernet1 Inc.
Hamilton, MT



From: cambium-users-boun...@wispa.org 
[mailto:cambium-users-boun...@wispa.org] On Behalf Of Ray Savich via 
Cambium-users
Sent: Friday, May 5, 2017 1:36 PM
To: Cambium Networks User Group 
mailto:cambium-users@wispa.org>>
Subject: Re: [Cambium-users] PMP 450i

Hi Christian,
I have forwarded this to our product team.

Ray

Join the Conversation
Cambium Networks Community 
Forum

From: cambium-users-boun...@wispa.org 
[mailto:cambium-users-boun...@wispa.org] On Behalf Of Christian Palecek
Sent: Friday, May 05, 2017 2:30 PM
To: 'Cambium Networks User Group' 
mailto:cambium-users@wispa.org>>
Subject: [Cambium-users] PMP 450i

Has anyone ever experienced a 450i just all the sudden stop working in the 
5.8ghz band but working fine in the 5.4ghz band?  We have an access point that 
is all the sudden having trouble on channel 5840, it has been running there for 
about 5 years.  It seems to work find down in a 5.4ghz channel for the time 
being, but I am looking for a possible source of interference.

I have run the analyzer on the access point as well as a good number of the 
SM's and there isn't any out of the ordinary on that channel at all, I am about 
to go out looking for something but I'm starting to wonder if this is somehow a 
hardware issue.

When running the access point in 5840 the subscribers will just connect for a 
second then drop off.  We don't get a reading on the rates or signal, it seems 
very odd, especially in comparison to dealing with interference in the past, 
seems like some, especially the close ones, would atleast stay connected for a 
short time.

Thanks,

Christian Palecek
Chief Operations Officer
Cybernet1 Inc.
Hamilton, MT

___
Cambium-users mailing list
Cambium-users@wispa.org
http://lists.wispa.org/mailman/listinfo/cambium-users

Re: [Cambium-users] 15.1 beta?

2017-03-13 Thread Matt Mangriotis via Cambium-users 
There should be one out there soon.  I thought it was going to get posted on 
Friday also.  Checking into this now.

Matt

-Original Message-
From: cambium-users-boun...@wispa.org [mailto:cambium-users-boun...@wispa.org] 
On Behalf Of George Skorup
Sent: Friday, March 10, 2017 10:29 PM
To: cambium-users@wispa.org
Subject: [Cambium-users] 15.1 beta?

I thought there was going to be a Canopy 15.1 beta build out this week or last?
___
Cambium-users mailing list
Cambium-users@wispa.org
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.wispa.org%2Fmailman%2Flistinfo%2Fcambium-users&data=02%7C01%7Cmatt.mangriotis%40cambiumnetworks.com%7Cbaab81aaaefd4dcdd0ac08d46837268e%7C0e263e36340946228ac818d993e76eb6%7C1%7C0%7C636248033464393311&sdata=yd2kv80vFF%2FjyX8%2BD0oOTw5wQfIL19gflPKLmuuUkVE%3D&reserved=0
___
Cambium-users mailing list
Cambium-users@wispa.org
http://lists.wispa.org/mailman/listinfo/cambium-users

Re: [Cambium-users] Huffington Post Article on Rural Connectivity

2017-02-26 Thread Matt Mangriotis via Cambium-users 
+1 -- Wish they did mention you guys!

At least everyone here knows who to give kudos to... thanks for being a great 
partner in this endeavor.

Matt

-Original Message-
From: cambium-users-boun...@wispa.org [mailto:cambium-users-boun...@wispa.org] 
On Behalf Of George Skorup
Sent: Sunday, February 26, 2017 5:04 PM
To: cambium-users@wispa.org
Subject: Re: [Cambium-users] Huffington Post Article on Rural Connectivity

So, back on the comment of why we (Cyber Broadcasting, LLC) weren't mentioned 
in this article by name. Government was involved, which means they cannot show 
bias and favoritism. You don't need to read any more into it than that. Cambium 
sponsored with some free end-user gear. We're providing some free service and 
we picked up a couple paying customers. 
End of story.

I'll add that this area is beyond low income, the lowest in the state. 
And hellacious tree density, so ePMP wasn't an option, but the 900 450i is 
giving us >20Mbps aggregate to most of the locations and a few others on 3.6 
450. We came up with a solution together with Cambium and everybody won.

Kudos to Cambium and Ray especially for organizing this.
___
Cambium-users mailing list
Cambium-users@wispa.org
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.wispa.org%2Fmailman%2Flistinfo%2Fcambium-users&data=02%7C01%7Cmatt.mangriotis%40cambiumnetworks.com%7Cf3f1799fc9e04b3f62f508d45e9bb2c7%7C0e263e36340946228ac818d993e76eb6%7C1%7C0%7C636237470197851597&sdata=fk0VYQX64I5EBO%2FRZ42O%2BbIPzCAjUBxwQL8B8yG8L3g%3D&reserved=0
___
Cambium-users mailing list
Cambium-users@wispa.org
http://lists.wispa.org/mailman/listinfo/cambium-users

Re: [Cambium-users] 450m CPE 5GHz

2016-12-15 Thread Matt Mangriotis via Cambium-users 
Almost perfect (nothing is really perfect perfect)... 

We have a new 450 SM coming in May.

It will be $299 MSRP.
- Gbps Ethernet Interface
- 50k PPS (same FPGA / SoC as the 450i)
- 4.9-5.9 GHz support
- Form factor like the Force 180 (16 dBi integrated panel)
- Power will be polarity Agnostic, BUT still operates on 30 VDC, so can 
continue to use the Canopy power supplies. (i.e. NOT 802.3af compatible)

In August, we expect to release a Force 200-like form factor (25 dBi) 
integrated dish version @ $349 MSRP, otherwise similar features as above.

Matt

-Original Message-
From: cambium-users-boun...@wispa.org [mailto:cambium-users-boun...@wispa.org] 
On Behalf Of George Skorup
Sent: Wednesday, December 14, 2016 1:55 PM
To: Cambium Networks User Group 
Subject: Re: [Cambium-users] 450m CPE 5GHz

I believe the new low-cost wideband 5GHz (and hopefully 3GHz later) SM will be 
a SOC design like 450i. Plus a GigE interface. I don't remember if it will have 
the RF filtering, but I believe so.

This would be the perfect device to make POE universal. 802.3at compliant as 
well as 20-60VDC passive, and polarity agnostic like Force180/200. Please make 
that happen, Cambium.

On 12/14/2016 12:54 PM, Ken Hohhof wrote:
> Extra CPU horsepower is probably for more packets per second now, not 
> just future upgrades, especially if you intend to use 30 or 40 MHz channels.
>
> It remains to be seen what  Santa will bring with the promised new 
> lower cost wideband SM, sometime in 2017.  Where will performance land 
> between current 450 and 450i SMs?
>
> -Original Message-
> From: cambium-users-boun...@wispa.org
> [mailto:cambium-users-boun...@wispa.org] On Behalf Of Jeremy Grip
> Sent: Wednesday, December 14, 2016 12:38 PM
> To: 'Cambium Networks User Group' 
> Subject: [Cambium-users] 450m CPE 5GHz
>
>
> Sooo..
> I'm trying to figure out whether it really makes sense to deploy 450i 
> subs vs. 450's with the Medusa AP. As far as I can see the current 
> advantages are
> (1) all three 5GHz bands, (2) unlocked throughput, (3) probable 
> improved interference mitigation, (4) integrated 23dB antenna (or 
> connectorized you're probably going to spend $600 total to add a 25dB 
> panel) and (4) more processing power for future upgrades.  On the 
> other hand, the $500-600 price tag for a CPE makes for a pretty 
> difficult business case for residential customers--up to a couple hundred 
> more, depending on the license level.
> Counter argument: 10 or 20 meg licenses will need to be upgraded 
> eventually--does anybody believe BW appetite will stay the same?--and 
> you'll need to buy the connectorized and an external panel with the 
> 450 for anything outside 1km or so if you care about optimizing the 
> link budget. So in reality you're probably saving ~$100 to buy a CPE 
> that's going to be obsolete sooner than a 450i.
> Thoughts, anyone?
>
>
> Jeremy Grip
> North Branch Networks,LLC
>
>
> ___
> Cambium-users mailing list
> Cambium-users@wispa.org
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.
> wispa.org%2Fmailman%2Flistinfo%2Fcambium-users&data=01%7C01%7Cmatt.man
> griotis%40cambiumnetworks.com%7Cfa6abd955dc74ee4eb2008d4245b1694%7C0e2
> 63e36340946228ac818d993e76eb6%7C1&sdata=NLrR%2BsdMbw%2Ff2PmQgNrs6Wqrvr
> wcBB6RaAEtXR2QX1E%3D&reserved=0
>
>
> ___
> Cambium-users mailing list
> Cambium-users@wispa.org
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.
> wispa.org%2Fmailman%2Flistinfo%2Fcambium-users&data=01%7C01%7Cmatt.man
> griotis%40cambiumnetworks.com%7Cfa6abd955dc74ee4eb2008d4245b1694%7C0e2
> 63e36340946228ac818d993e76eb6%7C1&sdata=NLrR%2BsdMbw%2Ff2PmQgNrs6Wqrvr
> wcBB6RaAEtXR2QX1E%3D&reserved=0

___
Cambium-users mailing list
Cambium-users@wispa.org
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.wispa.org%2Fmailman%2Flistinfo%2Fcambium-users&data=01%7C01%7Cmatt.mangriotis%40cambiumnetworks.com%7Cfa6abd955dc74ee4eb2008d4245b1694%7C0e263e36340946228ac818d993e76eb6%7C1&sdata=NLrR%2BsdMbw%2Ff2PmQgNrs6WqrvrwcBB6RaAEtXR2QX1E%3D&reserved=0
___
Cambium-users mailing list
Cambium-users@wispa.org
http://lists.wispa.org/mailman/listinfo/cambium-users