Re: [casper] Fwd: trouble compiling tutorial 1
Hi Mark, I tried running ctrl-D and updating my design and then re-compiling with 'bee_xps' (version 1.1). The compilation process crashed once more with the exact same message in the dialogue box as before. The output within the MATLAB command window is as follows: Detected Linux OS # ## System Update ## # Warning: The model 'tutorial1_revisited' does not have continuous states, hence Simulink is using the solver 'VariableStepDiscrete' instead of solver 'ode45'. You can disable this diagnostic by explicitly specifying a discrete solver in the solver tab of the Configuration Parameters dialog, or by setting the 'Automatic solver parameter selection' diagnostic to 'none' in the Diagnostics tab of the Configuration Parameters dialog. In gen_xps_files at 199 In bee_xpsrun_Callback at 150 In bee_xps at 82 Warning: Using a default value of 0.2 for maximum step size. The simulation step size will be equal to or less than this value. You can disable this diagnostic by setting 'Automatic solver parameter selection' diagnostic to 'none' in the Diagnostics page of the configuration parameters dialog. In gen_xps_files at 199 In bee_xpsrun_Callback at 150 In bee_xps at 82 # ## Block objects creation ## # ## ## Checking objects ## ## Running system generator ... Warning: The model 'tutorial1_revisited' does not have continuous states, hence Simulink is using the solver 'VariableStepDiscrete' instead of solver 'ode45'. You can disable this diagnostic by explicitly specifying a discrete solver in the solver tab of the Configuration Parameters dialog, or by setting the 'Automatic solver parameter selection' diagnostic to 'none' in the Diagnostics tab of the Configuration Parameters dialog. In /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlCompileGenerateMdl.pxlCompileGenerateMdl at 181 In /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlGenerateButton.pxlGenerateButton at 281 In gen_xps_files at 324 In bee_xpsrun_Callback at 150 In bee_xps at 82 Warning: Using a default value of 0.2 for maximum step size. The simulation step size will be equal to or less than this value. You can disable this diagnostic by setting 'Automatic solver parameter selection' diagnostic to 'none' in the Diagnostics page of the configuration parameters dialog. In /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlCompileGenerateMdl.pxlCompileGenerateMdl at 181 In /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlGenerateButton.pxlGenerateButton at 281 In gen_xps_files at 324 In bee_xpsrun_Callback at 150 In bee_xps at 82 I'm at a complete loss as to what may be causing this problem. If you (or anyone else reading this) know of any other troubleshooting procedures that may help pin down the problem it would be greatly appreciated. Thanks, Louis On Mon, Jul 11, 2011 at 2:01 PM, Mark Wagner mwag...@ssl.berkeley.eduwrote: Hi Louis, Can you run control-D to update the design? This will propagate the data types and may give you some idea where the issue lies. Mark On Fri, Jul 8, 2011 at 9:27 PM, Louis Dartez louisdar...@gmail.comwrote: Hello, I've been trying to compile tutorial 1 using the bee_xps command on MATLAB. After waiting a while I get a dialogue box titled 'NGC Netlisting Error' with the following errors: [: 21: /opt/Xilinx/11.1/ISE/lib/lin64:/opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/lib: /usr/local/MATLAB/R2009a/sys/os/glnxa64:/usr/local/MATLAB/R2009a/bin/glnxa64:/usr/local/MATLAB/R2009a/extern/lib/glnxa64:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64/native_threads:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64:/opt/Xilinx/11.1/ISE/bin/lin64: unexpected operator [: 22: /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/lib:/opt/Xilinx/11.1/ISE/lib/lin64: /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/lib:/usr/local/MATLAB/R2009a/sys/os/glnxa64:/usr/local/MATLAB/R2009a/bin/glnxa64:/usr/local/MATLAB/R2009a/extern/lib/glnxa64:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64/native_threads:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64/server:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64:/opt/Xilinx/11.1/ISE/bin/lin64: unexpected operator In addition to the dialogue box above, I'm getting the following output within the MATLAB prompt: In /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlCompileGenerateMdl.pxlCompileGenerateMdl at 181 In /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlGenerateButton.pxlGenerateButton at 281 In gen_xps_files at 324 In bee_xpsrun_Callback at 150 In bee_xps at 82 Error using == gen_xps_files at 328 XSG generation failed: Any Ideas as to what may be behind these errors? Any advice would be appreciated. Thanks, -- -- Louis Dartez (956) 372-5812 Arecibo Remote Command Center Scholar Center
Re: [casper] Fwd: trouble compiling tutorial 1
Hi Louis, The error you describe sounds similar to that encountered when trying to compile on Ubuntu -- see here: http://www.mail-archive.com/casper@lists.berkeley.edu/msg01224.html Are you using Centos/RHEL/one of the supported OSs? Cheers, Jack On 13 July 2011 23:10, Louis Dartez louisdar...@gmail.com wrote: Hi Mark, I tried running ctrl-D and updating my design and then re-compiling with 'bee_xps' (version 1.1). The compilation process crashed once more with the exact same message in the dialogue box as before. The output within the MATLAB command window is as follows: Detected Linux OS # ## System Update ## # Warning: The model 'tutorial1_revisited' does not have continuous states, hence Simulink is using the solver 'VariableStepDiscrete' instead of solver 'ode45'. You can disable this diagnostic by explicitly specifying a discrete solver in the solver tab of the Configuration Parameters dialog, or by setting the 'Automatic solver parameter selection' diagnostic to 'none' in the Diagnostics tab of the Configuration Parameters dialog. In gen_xps_files at 199 In bee_xpsrun_Callback at 150 In bee_xps at 82 Warning: Using a default value of 0.2 for maximum step size. The simulation step size will be equal to or less than this value. You can disable this diagnostic by setting 'Automatic solver parameter selection' diagnostic to 'none' in the Diagnostics page of the configuration parameters dialog. In gen_xps_files at 199 In bee_xpsrun_Callback at 150 In bee_xps at 82 # ## Block objects creation ## # ## ## Checking objects ## ## Running system generator ... Warning: The model 'tutorial1_revisited' does not have continuous states, hence Simulink is using the solver 'VariableStepDiscrete' instead of solver 'ode45'. You can disable this diagnostic by explicitly specifying a discrete solver in the solver tab of the Configuration Parameters dialog, or by setting the 'Automatic solver parameter selection' diagnostic to 'none' in the Diagnostics tab of the Configuration Parameters dialog. In /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlCompileGenerateMdl.pxlCompileGenerateMdl at 181 In /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlGenerateButton.pxlGenerateButton at 281 In gen_xps_files at 324 In bee_xpsrun_Callback at 150 In bee_xps at 82 Warning: Using a default value of 0.2 for maximum step size. The simulation step size will be equal to or less than this value. You can disable this diagnostic by setting 'Automatic solver parameter selection' diagnostic to 'none' in the Diagnostics page of the configuration parameters dialog. In /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlCompileGenerateMdl.pxlCompileGenerateMdl at 181 In /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlGenerateButton.pxlGenerateButton at 281 In gen_xps_files at 324 In bee_xpsrun_Callback at 150 In bee_xps at 82 I'm at a complete loss as to what may be causing this problem. If you (or anyone else reading this) know of any other troubleshooting procedures that may help pin down the problem it would be greatly appreciated. Thanks, Louis On Mon, Jul 11, 2011 at 2:01 PM, Mark Wagner mwag...@ssl.berkeley.eduwrote: Hi Louis, Can you run control-D to update the design? This will propagate the data types and may give you some idea where the issue lies. Mark On Fri, Jul 8, 2011 at 9:27 PM, Louis Dartez louisdar...@gmail.comwrote: Hello, I've been trying to compile tutorial 1 using the bee_xps command on MATLAB. After waiting a while I get a dialogue box titled 'NGC Netlisting Error' with the following errors: [: 21: /opt/Xilinx/11.1/ISE/lib/lin64:/opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/lib: /usr/local/MATLAB/R2009a/sys/os/glnxa64:/usr/local/MATLAB/R2009a/bin/glnxa64:/usr/local/MATLAB/R2009a/extern/lib/glnxa64:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64/native_threads:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64:/opt/Xilinx/11.1/ISE/bin/lin64: unexpected operator [: 22: /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/lib:/opt/Xilinx/11.1/ISE/lib/lin64: /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/lib:/usr/local/MATLAB/R2009a/sys/os/glnxa64:/usr/local/MATLAB/R2009a/bin/glnxa64:/usr/local/MATLAB/R2009a/extern/lib/glnxa64:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64/native_threads:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64/server:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64:/opt/Xilinx/11.1/ISE/bin/lin64: unexpected operator In addition to the dialogue box above, I'm getting the following output within the MATLAB prompt: In /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlCompileGenerateMdl.pxlCompileGenerateMdl at 181 In
Re: [casper] Fwd: trouble compiling tutorial 1
Hi Louis, Can you run control-D to update the design? This will propagate the data types and may give you some idea where the issue lies. Mark On Fri, Jul 8, 2011 at 9:27 PM, Louis Dartez louisdar...@gmail.com wrote: Hello, I've been trying to compile tutorial 1 using the bee_xps command on MATLAB. After waiting a while I get a dialogue box titled 'NGC Netlisting Error' with the following errors: [: 21: /opt/Xilinx/11.1/ISE/lib/lin64:/opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/lib: /usr/local/MATLAB/R2009a/sys/os/glnxa64:/usr/local/MATLAB/R2009a/bin/glnxa64:/usr/local/MATLAB/R2009a/extern/lib/glnxa64:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64/native_threads:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64:/opt/Xilinx/11.1/ISE/bin/lin64: unexpected operator [: 22: /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/lib:/opt/Xilinx/11.1/ISE/lib/lin64: /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/lib:/usr/local/MATLAB/R2009a/sys/os/glnxa64:/usr/local/MATLAB/R2009a/bin/glnxa64:/usr/local/MATLAB/R2009a/extern/lib/glnxa64:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64/native_threads:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64/server:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64:/opt/Xilinx/11.1/ISE/bin/lin64: unexpected operator In addition to the dialogue box above, I'm getting the following output within the MATLAB prompt: In /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlCompileGenerateMdl.pxlCompileGenerateMdl at 181 In /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlGenerateButton.pxlGenerateButton at 281 In gen_xps_files at 324 In bee_xpsrun_Callback at 150 In bee_xps at 82 Error using == gen_xps_files at 328 XSG generation failed: Any Ideas as to what may be behind these errors? Any advice would be appreciated. Thanks, -- -- Louis Dartez (956) 372-5812 Arecibo Remote Command Center Scholar Center for Gravitational Wave Astronomy University of Texas at Brownsville
[casper] Fwd: trouble compiling tutorial 1
Hello, I've been trying to compile tutorial 1 using the bee_xps command on MATLAB. After waiting a while I get a dialogue box titled 'NGC Netlisting Error' with the following errors: [: 21: /opt/Xilinx/11.1/ISE/lib/lin64:/opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/lib: /usr/local/MATLAB/R2009a/sys/os/glnxa64:/usr/local/MATLAB/R2009a/bin/glnxa64:/usr/local/MATLAB/R2009a/extern/lib/glnxa64:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64/native_threads:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64:/opt/Xilinx/11.1/ISE/bin/lin64: unexpected operator [: 22: /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/lib:/opt/Xilinx/11.1/ISE/lib/lin64: /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/lib:/usr/local/MATLAB/R2009a/sys/os/glnxa64:/usr/local/MATLAB/R2009a/bin/glnxa64:/usr/local/MATLAB/R2009a/extern/lib/glnxa64:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64/native_threads:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64/server:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64:/opt/Xilinx/11.1/ISE/bin/lin64: unexpected operator In addition to the dialogue box above, I'm getting the following output within the MATLAB prompt: In /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlCompileGenerateMdl.pxlCompileGenerateMdl at 181 In /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlGenerateButton.pxlGenerateButton at 281 In gen_xps_files at 324 In bee_xpsrun_Callback at 150 In bee_xps at 82 Error using == gen_xps_files at 328 XSG generation failed: Any Ideas as to what may be behind these errors? Any advice would be appreciated. Thanks, -- -- Louis Dartez (956) 372-5812 Arecibo Remote Command Center Scholar Center for Gravitational Wave Astronomy University of Texas at Brownsville