[OSL | CCIE_Voice] LAB 5A - RP-RL-RG
Hi, I am working on lab 5A and on page 267 , a RP of 911 is added to the RL- rl-local-gw--standard local route group. I actually used 9XX as the RP because it was working before. The Br1 and Br2 can both call 911 except HQ. I get a ' your call cannot be completed as dial ' message. I did a DNA analysis from 5001 to 911 and the end device was : rl-local-gw The device is configured with CSS: css-internal The line 5001 is configured with partiton: pt-internal However, none of the CSS or partition details shows up in the DNA results. I am not sure if this info is supposed to show up. I can't figure out what is wrong. Any help appreciated. Thanks.
Re: [OSL | CCIE_Voice] UCCX 7 with vmware..
Guys thanks for the reply. Micheal is Cisco windows 2003 comes under OEM license ?? On Wed, Jul 1, 2009 at 7:31 PM, Michael Ciarfello mciarfe...@iplogic.comwrote: No. How about you type the proper product key from the OS 2003 CD sleeve and be proud you are running a totally legit copy.That’s why it’s such a pain to order upgrades from the PUT tool because Cisco has to pay royalties for every CD it sends out. If you need assistance obtain the proper software, see your Local Cisco representative. Interesting about the ESX vs workstation. My workstation needed activation. Click on the balloon, it tries to register and tells you you have an invalid key. Enter in the new key from the CD Sleeve. It attempts to register again and should succeed this time. Trick is you have to give it Internet access which on workstation, set the vmware network card to NAT and it should pick up your internet connection from your host PC. If not, you can phone the new key in to MS. They give you a channenge key back, you type it in and bingo. *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Bill Hatcher *Sent:* Wednesday, July 01, 2009 9:53 AM *To:* ccie_voice@onlinestudylist.com *Subject:* Re: [OSL | CCIE_Voice] UCCX 7 with vmware.. I have been able to install this on VMWare ESX without that issue. On VMWorkstation I had to tell it it was a Windows 2003 Standard Edition, and enter in a Valid License. If you have the CallManager software installed on another box, you can use an application like Key Finder to pull the Microsoft key out of the registry. That seemed to work for me. -- Ravindra Lakpriya +94 773 532 094
[OSL | CCIE_Voice] CCM Dial Plan
Hi, Anybody here where can I get Japan Dial plan installer. I am looking for cisco website but no luck at the moment. Thanks. D --- On Thu, 7/2/09, ccie_voice-requ...@onlinestudylist.com ccie_voice-requ...@onlinestudylist.com wrote: From: ccie_voice-requ...@onlinestudylist.com ccie_voice-requ...@onlinestudylist.com Subject: CCIE_Voice Digest, Vol 41, Issue 9 To: ccie_voice@onlinestudylist.com Date: Thursday, July 2, 2009, 3:22 AM Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. UCCME SIP Phone Loads (Bill Hatcher) 2. Re: UCCME SIP Phone Loads (Aamir Panjwani) 3. Re: UCCME SIP Phone Loads (Bill Hatcher) 4. unable to access CUE 7.0.1 GUI (Aamir Panjwani) -- Message: 1 Date: Thu, 2 Jul 2009 08:27:56 +0300 From: Bill Hatcher wchatc...@gmail.com Subject: [OSL | CCIE_Voice] UCCME SIP Phone Loads To: ccie_voice@onlinestudylist.com Message-ID: e1756d520907012227k331cfef6j105abff476dba...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 Where can I find the correct SIP phone load for the 7960/7940 phones. I have downloaded several versions of CME and they don't seem to have the SIP 7960/40 phone loads. -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090702/a1c8a189/attachment-0001.htm -- Message: 2 Date: Thu, 2 Jul 2009 15:50:36 +1000 From: Aamir Panjwani aamir.panjw...@ivision.com.au Subject: Re: [OSL | CCIE_Voice] UCCME SIP Phone Loads To: Bill Hatcher wchatc...@gmail.com, ccie_voice@onlinestudylist.com Message-ID: 08c206e16f5fb2438def1714f3f1b93ba73...@syd-ad-02.internal.unify.net.au Content-Type: text/plain; charset=us-ascii Ya I ran into same problem few months backbasically SIP load for CME and CUCM are same so you will need to go to CUCM download section to get SIP load for CME! From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Bill Hatcher Sent: Thursday, 2 July 2009 3:28 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] UCCME SIP Phone Loads Where can I find the correct SIP phone load for the 7960/7940 phones. I have downloaded several versions of CME and they don't seem to have the SIP 7960/40 phone loads. __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090702/40be4629/attachment-0001.htm -- Message: 3 Date: Thu, 2 Jul 2009 08:56:12 +0300 From: Bill Hatcher wchatc...@gmail.com Subject: Re: [OSL | CCIE_Voice] UCCME SIP Phone Loads To: Aamir Panjwani aamir.panjw...@ivision.com.au Cc: ccie_voice@onlinestudylist.com Message-ID: e1756d520907012256y38b97711lbbeb42be590a6...@mail.gmail.com Content-Type: text/plain; charset=windows-1252 That's what I though, so I downloaded the 3rd party load. The other loads seemed to be specifically for CallManager only. On Thu, Jul 2, 2009 at 8:50 AM, Aamir Panjwani aamir.panjw...@ivision.com.au wrote: Ya I ran into same problem few months back?.basically SIP load for CME and CUCM are same so you will need to go to CUCM download section to get SIP load for CME! *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Bill Hatcher *Sent:* Thursday, 2 July 2009 3:28 PM *To:* ccie_voice@onlinestudylist.com *Subject:* [OSL | CCIE_Voice] UCCME SIP Phone Loads Where can I find the correct SIP phone load for the 7960/7940 phones. I have downloaded several versions of CME and they don't seem to have the SIP 7960/40 phone loads. __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http
Re: [OSL | CCIE_Voice] unable to access CUE 7.0.1 GUI
I think I remember the path command being: ip http path flash:GUI/ Not sure, but you may want to check it. On Thu, Jul 2, 2009 at 3:21 AM, Aamir Panjwani aamir.panjw...@ivision.com.au wrote: I have upgraded CUE from 3.2.1 to 7.0.1 and did the factory restore as well. Now when I go to http://142.102.66.5 to run CUE initialization wizard the GUI just won’t load up, it’s totally blank. It does change to http://142.102.66.5/Web/index.html but that is it. 1) I have cleared the cache/cookies on the browser, tried IE and firefox 2) CME GUI works just fine 3) IP connectivity is fine too. I can ping 142.102.66.5 from my PC and can ping from CUE CLI to my PC. 4) I can log into CUE CLI fine and have also gone through intial setup 5) Following is my config interface FastEthernet0/0.130 description ** BR2 VOICE VLAN ** encapsulation dot1Q 130 ip address 142.102.66.2 255.255.255.0 interface Service-Engine1/0 ip unnumbered FastEthernet0/0.130 service-module ip address 142.102.66.5 255.255.255.0 service-module ip default-gateway 142.102.66.2 ip route 142.102.66.5 255.255.255.255 Service-Engine1/0 ip http server no ip http secure-server ip http path flash: __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ -- They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. -Ben Franklin
Re: [OSL | CCIE_Voice] unable to access CUE 7.0.1 GUI
No that didn't work From: Ron Cannella [mailto:roncanne...@gmail.com] Sent: Thursday, 2 July 2009 11:00 PM To: Aamir Panjwani Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] unable to access CUE 7.0.1 GUI I think I remember the path command being: ip http path flash:GUI/ Not sure, but you may want to check it. On Thu, Jul 2, 2009 at 3:21 AM, Aamir Panjwani aamir.panjw...@ivision.com.au wrote: I have upgraded CUE from 3.2.1 to 7.0.1 and did the factory restore as well. Now when I go to http://142.102.66.5 http://142.102.66.5/ to run CUE initialization wizard the GUI just won't load up, it's totally blank. It does change to http://142.102.66.5/Web/index.html but that is it. 1) I have cleared the cache/cookies on the browser, tried IE and firefox 2) CME GUI works just fine 3) IP connectivity is fine too. I can ping 142.102.66.5 from my PC and can ping from CUE CLI to my PC. 4) I can log into CUE CLI fine and have also gone through intial setup 5) Following is my config interface FastEthernet0/0.130 description ** BR2 VOICE VLAN ** encapsulation dot1Q 130 ip address 142.102.66.2 255.255.255.0 interface Service-Engine1/0 ip unnumbered FastEthernet0/0.130 service-module ip address 142.102.66.5 255.255.255.0 service-module ip default-gateway 142.102.66.2 ip route 142.102.66.5 255.255.255.255 Service-Engine1/0 ip http server no ip http secure-server ip http path flash: __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ -- They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. -Ben Franklin __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __
[OSL | CCIE_Voice] DTMF Relay Question
I ran into an issue when setting up a SIP based FXS port on the HQ router. I can get the call to successfully ring and be answered by DN's that require transcoding (SiteB and SiteC) But I found that if the call into Site C forwards to CUE, I don't have any DTMF functions. I realize the DTMF-relay configurations are different between the Sip trunk and the H323 connection to CME. I've never understood the process /configuration to get this working. If someone has a good link or can get me started in the right direction, I'd really appreciate it. - Scott
Re: [OSL | CCIE_Voice] unable to access CUE 7.0.1 GUI
sorry... ip http path flash:/GUI I think it really depends on here the tar unpacks them. Can check with a sh flash: | inc html and I also think you need to add web admin system name username password cisco On Thu, Jul 2, 2009 at 9:11 AM, Aamir Panjwani aamir.panjw...@ivision.com.au wrote: No that didn’t work *From:* Ron Cannella [mailto:roncanne...@gmail.com] *Sent:* Thursday, 2 July 2009 11:00 PM *To:* Aamir Panjwani *Cc:* ccie_voice@onlinestudylist.com *Subject:* Re: [OSL | CCIE_Voice] unable to access CUE 7.0.1 GUI I think I remember the path command being: ip http path flash:GUI/ Not sure, but you may want to check it. On Thu, Jul 2, 2009 at 3:21 AM, Aamir Panjwani aamir.panjw...@ivision.com.au wrote: I have upgraded CUE from 3.2.1 to 7.0.1 and did the factory restore as well. Now when I go to http://142.102.66.5 to run CUE initialization wizard the GUI just won’t load up, it’s totally blank. It does change to http://142.102.66.5/Web/index.html but that is it. 1) I have cleared the cache/cookies on the browser, tried IE and firefox 2) CME GUI works just fine 3) IP connectivity is fine too. I can ping 142.102.66.5 from my PC and can ping from CUE CLI to my PC. 4) I can log into CUE CLI fine and have also gone through intial setup 5) Following is my config interface FastEthernet0/0.130 description ** BR2 VOICE VLAN ** encapsulation dot1Q 130 ip address 142.102.66.2 255.255.255.0 interface Service-Engine1/0 ip unnumbered FastEthernet0/0.130 service-module ip address 142.102.66.5 255.255.255.0 service-module ip default-gateway 142.102.66.2 ip route 142.102.66.5 255.255.255.255 Service-Engine1/0 ip http server no ip http secure-server ip http path flash: __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ -- They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. -Ben Franklin __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ -- They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. -Ben Franklin
Re: [OSL | CCIE_Voice] DTMF Relay Question
The Gateways and Gatekeepers (GWGK) book goes thru the DTMF stuff pretty well I thought. But I am still trying to get my brain wrapped around it. On Thu, Jul 2, 2009 at 9:29 AM, Scott ODonnell scott.odonn...@gmail.comwrote: I ran into an issue when setting up a SIP based FXS port on the HQ router. I can get the call to successfully ring and be answered by DN's that require transcoding (SiteB and SiteC) But I found that if the call into Site C forwards to CUE, I don't have any DTMF functions. I realize the DTMF-relay configurations are different between the Sip trunk and the H323 connection to CME. I've never understood the process /configuration to get this working. If someone has a good link or can get me started in the right direction, I'd really appreciate it. - Scott -- They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. -Ben Franklin
Re: [OSL | CCIE_Voice] CUPC Presence statuses...
Maybe you have resolved your issue by now. I have tested it in my lab and I see on the phone under both conditions (Softphone and Deskphone mode). -Ursprüngliche Nachricht- Von: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] Im Auftrag von Jonathan Charles Gesendet: Freitag, 12. Juni 2009 09:11 An: Cristobal Priego Cc: ccie_voice@onlinestudylist.com; cisco-v...@puck.nether.net Betreff: Re: [OSL | CCIE_Voice] CUPC Presence statuses... Really, try it. Seriously. GO to CUPC, select control of desk phone, start an IM with someone... call a third person... If the CUPC is set to use the hard phone, you will not see the status. On Wed, Jun 10, 2009 at 3:46 PM, Cristobal Priegocristobalpri...@gmail.com wrote: that status is set through SIP. make sure that the user is associated to the proper gateway profile. restart the SIP Proxy. I have CPUC integrated and it will let you know when you are on the phone, idle, away, in a meeting, dnd 2009/6/9 Jonathan Charles jonv...@gmail.com The primary extension is set. Both CUPC and the 7961 are associated to the user. The user is assigned to the DN on both devices. The user is listed as a UserID on both devices. CUPS is 7.0(2); CUCM is 7.0(1) Jonathan On Tue, Jun 9, 2009 at 8:39 PM, Priyank Kiranpriyank.ki...@gmail.com wrote: Make sure the setting for Primary Extension on the user page looks OK. If both the softphone and deskphone share the same extension, you should be OK after switching the application from softphone to deskphone. -Priyank On Tue, Jun 9, 2009 at 4:29 PM, Jonathan Charles jonv...@gmail.com wrote: OK, so we basically have three statuses... Available, green with a checkbox Idle, Yellow with a minus sign... and DND which is red with a slash How do we show that someone is on the phone? It appears to only work when I make the call using the softphone... (CUPC), but if I set CUPC to use the deskphone and make the call either thru the desk phone or thru CUPC, I do not show as on the phone from other users... Control of the phone from CUPC works fine... no probs at all... Jonathan
Re: [OSL | CCIE_Voice] CUPC Presence statuses...
what did you do to get it working? 2009/7/2 GRAFL Philipp philipp.gr...@nextiraone.at Maybe you have resolved your issue by now. I have tested it in my lab and I see on the phone under both conditions (Softphone and Deskphone mode). -Ursprüngliche Nachricht- Von: ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] Im Auftrag von Jonathan Charles Gesendet: Freitag, 12. Juni 2009 09:11 An: Cristobal Priego Cc: ccie_voice@onlinestudylist.com; cisco-v...@puck.nether.net Betreff: Re: [OSL | CCIE_Voice] CUPC Presence statuses... Really, try it. Seriously. GO to CUPC, select control of desk phone, start an IM with someone... call a third person... If the CUPC is set to use the hard phone, you will not see the status. On Wed, Jun 10, 2009 at 3:46 PM, Cristobal Priegocristobalpri...@gmail.com wrote: that status is set through SIP. make sure that the user is associated to the proper gateway profile. restart the SIP Proxy. I have CPUC integrated and it will let you know when you are on the phone, idle, away, in a meeting, dnd 2009/6/9 Jonathan Charles jonv...@gmail.com The primary extension is set. Both CUPC and the 7961 are associated to the user. The user is assigned to the DN on both devices. The user is listed as a UserID on both devices. CUPS is 7.0(2); CUCM is 7.0(1) Jonathan On Tue, Jun 9, 2009 at 8:39 PM, Priyank Kiranpriyank.ki...@gmail.com wrote: Make sure the setting for Primary Extension on the user page looks OK. If both the softphone and deskphone share the same extension, you should be OK after switching the application from softphone to deskphone. -Priyank On Tue, Jun 9, 2009 at 4:29 PM, Jonathan Charles jonv...@gmail.com wrote: OK, so we basically have three statuses... Available, green with a checkbox Idle, Yellow with a minus sign... and DND which is red with a slash How do we show that someone is on the phone? It appears to only work when I make the call using the softphone... (CUPC), but if I set CUPC to use the deskphone and make the call either thru the desk phone or thru CUPC, I do not show as on the phone from other users... Control of the phone from CUPC works fine... no probs at all... Jonathan
[OSL | CCIE_Voice] I PASSED!!!!!
CCIE # 24757! YEEE HAAA!!! Cliff
Re: [OSL | CCIE_Voice] I PASSED!!!!!
Awesome job, Cliff - congrats! Regards, Wayne A. Lawson II - CCIE #5244 Founder, President CEO: - IPexpert, Inc. - Proctor Labs, Inc. - Platinum Solutions Group, LLC. Mailto: wlaw...@ipexpert.com Mobile: +1.810.334.1564 :: Message sent from iPhone. On Jul 2, 2009, at 12:06 PM, Cliff McGlamry cl...@mcglamry.net wrote: CCIE # 24757! YEEE HAAA!!! Cliff
Re: [OSL | CCIE_Voice] I PASSED!!!!!
Congratulations Cliff way to go ! 2009/7/2 Wayne Lawson groupst...@ipexpert.com Awesome job, Cliff - congrats! Regards, Wayne A. Lawson II - CCIE #5244 Founder, President CEO: - IPexpert, Inc. - Proctor Labs, Inc. - Platinum Solutions Group, LLC. Mailto: wlaw...@ipexpert.comwlaw...@ipexpert.com Mobile: +1.810.334.1564 :: Message sent from iPhone. On Jul 2, 2009, at 12:06 PM, Cliff McGlamry cl...@mcglamry.net wrote: CCIE # 24757! YEEE HAAA!!! Cliff
Re: [OSL | CCIE_Voice] I PASSED!!!!!
Cliff: Great Job Congratulations. Thanks Larry Hadrava CCIE #12203 CCNP Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com On Thu, Jul 2, 2009 at 12:06 PM, Cliff McGlamry cl...@mcglamry.net wrote: CCIE # 24757! YEEE HAAA!!! Cliff
Re: [OSL | CCIE_Voice] I PASSED!!!!!
Cliff: Great job Congratulations. Thanks Larry Hadrava CCIE #12203 CCNP Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com On Thu, Jul 2, 2009 at 1:57 PM, Cristobal Priego cristobalpri...@gmail.comwrote: Congratulations Cliff way to go ! 2009/7/2 Wayne Lawson groupst...@ipexpert.com Awesome job, Cliff - congrats! Regards, Wayne A. Lawson II - CCIE #5244 Founder, President CEO: - IPexpert, Inc. - Proctor Labs, Inc. - Platinum Solutions Group, LLC. Mailto: wlaw...@ipexpert.comwlaw...@ipexpert.com Mobile: +1.810.334.1564 :: Message sent from iPhone. On Jul 2, 2009, at 12:06 PM, Cliff McGlamry cl...@mcglamry.net wrote: CCIE # 24757! YEEE HAAA!!! Cliff
[OSL | CCIE_Voice] How to trace an incoming call
Hello Experts, I have a quick question. when you want to check an incoming call on the trace what do you need to look for in the trace to be pointed at the beginning of the call thanks Cris
Re: [OSL | CCIE_Voice] How to trace an incoming call
do i look for the first occurrence based on the calling number or the called number? yes the stationD and the Station ID 2009/7/2 c george cisco...@hotmail.com look for the 1st occurrence of the number then look for the ID number and start looking for that. This will show you the signaling everything once you search by the id number. It is usually : followed by a number on the right hand side of the screen Respectfully Charles George -- Date: Thu, 2 Jul 2009 11:55:51 -0700 From: cristobalpri...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] How to trace an incoming call Hello Experts, I have a quick question. when you want to check an incoming call on the trace what do you need to look for in the trace to be pointed at the beginning of the call thanks Cris -- Windows Live™ SkyDrive™: Get 25 GB of free online storage. Get it on your BlackBerry or iPhone.http://windowslive.com/online/skydrive?ocid=TXT_TAGLM_WL_SD_25GB_062009
Re: [OSL | CCIE_Voice] How to trace an incoming call
if you have the station ID then loog for the 1st occurrence of that. But I look for the 1st occurrence of the number I called jsut to get the station ID and then search for the 1st occurrence of the station ID which will be the beginning of the call in CCM or\and CME Respectfully Charles George Date: Thu, 2 Jul 2009 11:59:52 -0700 Subject: Re: [OSL | CCIE_Voice] How to trace an incoming call From: cristobalpri...@gmail.com To: cisco...@hotmail.com CC: ccie_voice@onlinestudylist.com do i look for the first occurrence based on the calling number or the called number? yes the stationD and the Station ID 2009/7/2 c george cisco...@hotmail.com look for the 1st occurrence of the number then look for the ID number and start looking for that. This will show you the signaling everything once you search by the id number. It is usually : followed by a number on the right hand side of the screen Respectfully Charles George Date: Thu, 2 Jul 2009 11:55:51 -0700 From: cristobalpri...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] How to trace an incoming call Hello Experts, I have a quick question. when you want to check an incoming call on the trace what do you need to look for in the trace to be pointed at the beginning of the call thanks Cris Windows Live™ SkyDrive™: Get 25 GB of free online storage. Get it on your BlackBerry or iPhone. _ Insert movie times and more without leaving Hotmail®. http://windowslive.com/Tutorial/Hotmail/QuickAdd?ocid=TXT_TAGLM_WL_HM_Tutorial_QuickAdd_062009
[OSL | CCIE_Voice] Questions regarding IOS Streaming MOH Multicast.
I have 99% of this setup working. (I think :) - MOH Multicast configured on Server, Audio Source, MRG, MRGL, etc. - I put the MOH servers in there own Device pool with underlying Regions set to G.711 between it and all other regions. I have the following in the H323 SRST router ccm-manager music-on-hold call-manager-fallback moh music-on-hold.au multicast moh 239.1.1.1 port 16384 route loop ip fast0/0 ip - Calls between SB phones that are put on hold show in perfmon that a multicast MOH is invoked. - I can't actually hear it because my lab is remote. BUT - When I place a call into my SB gw from PSTN and have the call put on hold, perfmon shows a UNICAST moh being invoked. The gw is configured as H323. What can I be missing ? - Scott
Re: [OSL | CCIE_Voice] Questions regarding IOS Streaming MOH Multicast.
on the MOH server, what is the hop count set to for the selected MOH file? when you place a call on hold on the remote site you can issue this cmd on the remote site show ccm-manager music-on-hold to confirm that you're playing the music locally on the Branch and use debug ephone moh if you issue a show ephone summary do you see something like this File music-on-hold.au type AU Media_Payload_G.711Ulaw64k 160 bytes ? 2009/7/2 Scott ODonnell scott.odonn...@gmail.com I have 99% of this setup working. (I think :) - MOH Multicast configured on Server, Audio Source, MRG, MRGL, etc. - I put the MOH servers in there own Device pool with underlying Regions set to G.711 between it and all other regions. I have the following in the H323 SRST router ccm-manager music-on-hold call-manager-fallback moh music-on-hold.au multicast moh 239.1.1.1 port 16384 route loop ip fast0/0 ip - Calls between SB phones that are put on hold show in perfmon that a multicast MOH is invoked. - I can't actually hear it because my lab is remote. BUT - When I place a call into my SB gw from PSTN and have the call put on hold, perfmon shows a UNICAST moh being invoked. The gw is configured as H323. What can I be missing ? - Scott
Re: [OSL | CCIE_Voice] Questions regarding IOS Streaming MOH Multicast.
This is the output of the commands Show ephone summary : File music-on-hold.au type AU Media_Payload_G711Ulaw64k 160 bytes Moh multicast on 239.1.1.1 port 16384 Show ccm-manager music-on-hold: Current active multicast sessions : 0 My understanding is the multicast MOH should be streaming 24/7 anyway but it doesn't look like it. On Thu, Jul 2, 2009 at 3:42 PM, Cristobal Priegocristobalpri...@gmail.com wrote: on the MOH server, what is the hop count set to for the selected MOH file? when you place a call on hold on the remote site you can issue this cmd on the remote site show ccm-manager music-on-hold to confirm that you're playing the music locally on the Branch and use debug ephone moh if you issue a show ephone summary do you see something like this File music-on-hold.au type AU Media_Payload_G.711Ulaw64k 160 bytes ? 2009/7/2 Scott ODonnell scott.odonn...@gmail.com I have 99% of this setup working. (I think :) - MOH Multicast configured on Server, Audio Source, MRG, MRGL, etc. - I put the MOH servers in there own Device pool with underlying Regions set to G.711 between it and all other regions. I have the following in the H323 SRST router ccm-manager music-on-hold call-manager-fallback moh music-on-hold.au multicast moh 239.1.1.1 port 16384 route loop ip fast0/0 ip - Calls between SB phones that are put on hold show in perfmon that a multicast MOH is invoked. - I can't actually hear it because my lab is remote. BUT - When I place a call into my SB gw from PSTN and have the call put on hold, perfmon shows a UNICAST moh being invoked. The gw is configured as H323. What can I be missing ? - Scott
Re: [OSL | CCIE_Voice] Questions regarding IOS Streaming MOH Multicast.
The show ccm-manager music-on-hold command displays information about connections on hold only. It does not display information about multicast streams going to IP phones on hold. 2009/7/2 Scott ODonnell scott.odonn...@gmail.com This is the output of the commands Show ephone summary : File music-on-hold.au type AU Media_Payload_G711Ulaw64k 160 bytes Moh multicast on 239.1.1.1 port 16384 Show ccm-manager music-on-hold: Current active multicast sessions : 0 My understanding is the multicast MOH should be streaming 24/7 anyway but it doesn't look like it. On Thu, Jul 2, 2009 at 3:42 PM, Cristobal Priegocristobalpri...@gmail.com wrote: on the MOH server, what is the hop count set to for the selected MOH file? when you place a call on hold on the remote site you can issue this cmd on the remote site show ccm-manager music-on-hold to confirm that you're playing the music locally on the Branch and use debug ephone moh if you issue a show ephone summary do you see something like this File music-on-hold.au type AU Media_Payload_G.711Ulaw64k 160 bytes ? 2009/7/2 Scott ODonnell scott.odonn...@gmail.com I have 99% of this setup working. (I think :) - MOH Multicast configured on Server, Audio Source, MRG, MRGL, etc. - I put the MOH servers in there own Device pool with underlying Regions set to G.711 between it and all other regions. I have the following in the H323 SRST router ccm-manager music-on-hold call-manager-fallback moh music-on-hold.au multicast moh 239.1.1.1 port 16384 route loop ip fast0/0 ip - Calls between SB phones that are put on hold show in perfmon that a multicast MOH is invoked. - I can't actually hear it because my lab is remote. BUT - When I place a call into my SB gw from PSTN and have the call put on hold, perfmon shows a UNICAST moh being invoked. The gw is configured as H323. What can I be missing ? - Scott
Re: [OSL | CCIE_Voice] Questions regarding IOS Streaming MOH Multicast.
Am I correct in thinking Multicast MOH WOULD NOT be considered in regards to location bandwidth? On Thu, Jul 2, 2009 at 3:56 PM, Cristobal Priegocristobalpri...@gmail.com wrote: The show ccm-manager music-on-hold command displays information about connections on hold only. It does not display information about multicast streams going to IP phones on hold. 2009/7/2 Scott ODonnell scott.odonn...@gmail.com This is the output of the commands Show ephone summary : File music-on-hold.au type AU Media_Payload_G711Ulaw64k 160 bytes Moh multicast on 239.1.1.1 port 16384 Show ccm-manager music-on-hold: Current active multicast sessions : 0 My understanding is the multicast MOH should be streaming 24/7 anyway but it doesn't look like it. On Thu, Jul 2, 2009 at 3:42 PM, Cristobal Priegocristobalpri...@gmail.com wrote: on the MOH server, what is the hop count set to for the selected MOH file? when you place a call on hold on the remote site you can issue this cmd on the remote site show ccm-manager music-on-hold to confirm that you're playing the music locally on the Branch and use debug ephone moh if you issue a show ephone summary do you see something like this File music-on-hold.au type AU Media_Payload_G.711Ulaw64k 160 bytes ? 2009/7/2 Scott ODonnell scott.odonn...@gmail.com I have 99% of this setup working. (I think :) - MOH Multicast configured on Server, Audio Source, MRG, MRGL, etc. - I put the MOH servers in there own Device pool with underlying Regions set to G.711 between it and all other regions. I have the following in the H323 SRST router ccm-manager music-on-hold call-manager-fallback moh music-on-hold.au multicast moh 239.1.1.1 port 16384 route loop ip fast0/0 ip - Calls between SB phones that are put on hold show in perfmon that a multicast MOH is invoked. - I can't actually hear it because my lab is remote. BUT - When I place a call into my SB gw from PSTN and have the call put on hold, perfmon shows a UNICAST moh being invoked. The gw is configured as H323. What can I be missing ? - Scott
Re: [OSL | CCIE_Voice] Questions regarding IOS Streaming MOH Multicast.
No, MMoH is not considered in location bandwidth. Could be a wrong MRG of the GW Device Pool? Date: Thu, 2 Jul 2009 16:20:04 -0400 From: scott.odonn...@gmail.com To: cristobalpri...@gmail.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Questions regarding IOS Streaming MOH Multicast. Am I correct in thinking Multicast MOH WOULD NOT be considered in regards to location bandwidth? On Thu, Jul 2, 2009 at 3:56 PM, Cristobal Priegocristobalpri...@gmail.com wrote: The show ccm-manager music-on-hold command displays information about connections on hold only. It does not display information about multicast streams going to IP phones on hold. 2009/7/2 Scott ODonnell scott.odonn...@gmail.com This is the output of the commands Show ephone summary : File music-on-hold.au type AU Media_Payload_G711Ulaw64k 160 bytes Moh multicast on 239.1.1.1 port 16384 Show ccm-manager music-on-hold: Current active multicast sessions : 0 My understanding is the multicast MOH should be streaming 24/7 anyway but it doesn't look like it. On Thu, Jul 2, 2009 at 3:42 PM, Cristobal Priegocristobalpri...@gmail.com wrote: on the MOH server, what is the hop count set to for the selected MOH file? when you place a call on hold on the remote site you can issue this cmd on the remote site show ccm-manager music-on-hold to confirm that you're playing the music locally on the Branch and use debug ephone moh if you issue a show ephone summary do you see something like this File music-on-hold.au type AU Media_Payload_G.711Ulaw64k 160 bytes ? 2009/7/2 Scott ODonnell scott.odonn...@gmail.com I have 99% of this setup working. (I think :) - MOH Multicast configured on Server, Audio Source, MRG, MRGL, etc. - I put the MOH servers in there own Device pool with underlying Regions set to G.711 between it and all other regions. I have the following in the H323 SRST router ccm-manager music-on-hold call-manager-fallback moh music-on-hold.au multicast moh 239.1.1.1 port 16384 route loop ip fast0/0 ip - Calls between SB phones that are put on hold show in perfmon that a multicast MOH is invoked. - I can't actually hear it because my lab is remote. BUT - When I place a call into my SB gw from PSTN and have the call put on hold, perfmon shows a UNICAST moh being invoked. The gw is configured as H323. What can I be missing ? - Scott _ Novo Internet Explorer 8. Baixe agora, é grátis! http://brasil.microsoft.com.br/IE8/mergulhe/?utm_source=MSN%3BHotmailutm_medium=Taglineutm_campaign=IE8
Re: [OSL | CCIE_Voice] Questions regarding IOS Streaming MOH Multicast.
is the file loaded in Flash has the proper format ? 2009/7/2 Sergio Polizer spoli...@hotmail.com No, MMoH is not considered in location bandwidth. Could be a wrong MRG of the GW Device Pool? Date: Thu, 2 Jul 2009 16:20:04 -0400 From: scott.odonn...@gmail.com To: cristobalpri...@gmail.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Questions regarding IOS Streaming MOH Multicast. Am I correct in thinking Multicast MOH WOULD NOT be considered in regards to location bandwidth? On Thu, Jul 2, 2009 at 3:56 PM, Cristobal Priegocristobalpri...@gmail.com wrote: The show ccm-manager music-on-hold command displays information about connections on hold only. It does not display information about multicast streams going to IP phones on hold. 2009/7/2 Scott ODonnell scott.odonn...@gmail.com This is the output of the commands Show ephone summary : File music-on-hold.au type AU Media_Payload_G711Ulaw64k 160 bytes Moh multicast on 239.1.1.1 port 16384 Show ccm-manager music-on-hold: Current active multicast sessions : 0 My understanding is the multicast MOH should be streaming 24/7 anyway but it doesn't look like it. On Thu, Jul 2, 2009 at 3:42 PM, Cristobal Priegocristobalpri...@gmail.com wrote: on the MOH server, what is the hop count set to for the selected MOH file? when you place a call on hold on the remote site you can issue this cmd on the remote site show ccm-manager music-on-hold to confirm that you're playing the music locally on the Branch and use debug ephone moh if you issue a show ephone summary do you see something like this File music-on-hold.au type AU Media_Payload_G.711Ulaw64k 160 bytes ? 2009/7/2 Scott ODonnell scott.odonn...@gmail.com I have 99% of this setup working. (I think :) - MOH Multicast configured on Server, Audio Source, MRG, MRGL, etc. - I put the MOH servers in there own Device pool with underlying Regions set to G.711 between it and all other regions. I have the following in the H323 SRST router ccm-manager music-on-hold call-manager-fallback moh music-on-hold.au multicast moh 239.1.1.1 port 16384 route loop ip fast0/0 ip - Calls between SB phones that are put on hold show in perfmon that a multicast MOH is invoked. - I can't actually hear it because my lab is remote. BUT - When I place a call into my SB gw from PSTN and have the call put on hold, perfmon shows a UNICAST moh being invoked. The gw is configured as H323. What can I be missing ? - Scott -- Instale o novo Internet Explorer 8 otimizado para o MSN. Download aquihttp://ie8.msn.com/microsoft/internet-explorer-8/pt-br/ie8.aspx
Re: [OSL | CCIE_Voice] UCCX 7 with vmware..
I don't know what kind of arrangement MS has with Cisco and I don't know how OEM licensing applies. shrug From: Ravindra Lakpriya [lakpr...@gmail.com] Sent: Thursday, July 02, 2009 6:38 AM To: Michael Ciarfello Cc: Bill Hatcher; ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] UCCX 7 with vmware.. Guys thanks for the reply. Micheal is Cisco windows 2003 comes under OEM license ?? On Wed, Jul 1, 2009 at 7:31 PM, Michael Ciarfello mciarfe...@iplogic.commailto:mciarfe...@iplogic.com wrote: No. How about you type the proper product key from the OS 2003 CD sleeve and be proud you are running a totally legit copy.That’s why it’s such a pain to order upgrades from the PUT tool because Cisco has to pay royalties for every CD it sends out. If you need assistance obtain the proper software, see your Local Cisco representative. Interesting about the ESX vs workstation. My workstation needed activation. Click on the balloon, it tries to register and tells you you have an invalid key. Enter in the new key from the CD Sleeve. It attempts to register again and should succeed this time. Trick is you have to give it Internet access which on workstation, set the vmware network card to NAT and it should pick up your internet connection from your host PC. If not, you can phone the new key in to MS. They give you a channenge key back, you type it in and bingo. From: ccie_voice-boun...@onlinestudylist.commailto:ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.commailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Bill Hatcher Sent: Wednesday, July 01, 2009 9:53 AM To: ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] UCCX 7 with vmware.. I have been able to install this on VMWare ESX without that issue. On VMWorkstation I had to tell it it was a Windows 2003 Standard Edition, and enter in a Valid License. If you have the CallManager software installed on another box, you can use an application like Key Finder to pull the Microsoft key out of the registry. That seemed to work for me. -- Ravindra Lakpriya +94 773 532 094
Re: [OSL | CCIE_Voice] X-lite in CM 7.0
Yes. Username is DN Password is the end-user password. Authorization user name is the end-user username. Don't know what display name is. Blank worked for me. You will need to associate the device to the end-user (device association) You will need to set the Digest user under the phone. Use your PC MAC address for the phone device. From: ccie_voice-boun...@onlinestudylist.com [ccie_voice-boun...@onlinestudylist.com] On Behalf Of Erwan Erwan [e_er...@yahoo.com] Sent: Wednesday, July 01, 2009 10:54 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] X-lite in CM 7.0 hi, can X-lite register to CCM 7.0 for SIP phone? if yes, where to config the user name and password ? tks
