[OSL | CCIE_Voice] Meeting Place Express in Vmware
Greetings Guys, Is it possible to install Meeting place express in vmware ? I have tried it but no luck. Thanks in advance. -- Ravindra Lakpriya +94 773 532 094 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 5A - BR2 - Help
For calls to 911 the path taken is: RP =911 RL-Local Standard Local Route Group The ³Local Route Group² setting configured in the calling party device pool (HQ or BR1) is used to route this call. In the case of HQ we only ever want to send 911 calls to the HQ gateway and never the GK trunk or the BR1 gateway. Hence we ONLY put the HQ SIP Trunk into RG-HQ which is used in the above scenario. If we did place the GK-Trunk into RG-HQ then we could potentially route calls (such as 911) unintentionally through the GK which would make no sense. For calls to 3xxx the path taken is: RP-3xxx RL-GK RG-GK This is a completely separate Route Pattern that does not point to RL-Local but instead to a brand new Route List. We place the GK-Trunk into a different RG called RG-GK and we place this new RG into the newly created RL. Hope it makes some sense. -- Vik Malhi CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Voice Guy learn.vo...@gmail.com Date: Wed, 8 Jul 2009 03:31:16 +0800 To: Vik Malhi vma...@ipexpert.com Cc: OSL Group ccie_voice@onlinestudylist.com Subject: Re: Lab 5A - BR2 - Help Hi Vik, Thanks for the quick reply, the 4 digit ani is working now. Sorry if I confused you. For my Q1 I was referring to the Proctor Guide solution on page 269. This is part of the solution leading up to the question on section 5.6 on page 271 of the proctor guide or page 69 of the WB. It is a whole sequence of solutions steps finally leading up to the solution verification on page 279. I was asking why on page 269 of your solution that in the selection of devices in the Route Group configuration section ONLY the hq-sip device is chosen for the RG -rg-hq. This is because I could not call the 3XXX phones until I included the gk-trunk device. Calls from the HQ must be going through the gk-trunk ? Thanks for your help. I am still new to voice and is still trying to understand how things work. On Wed, Jul 8, 2009 at 12:40 AM, Vik Malhi vma...@ipexpert.com wrote: See Q 5.11 and 5.12 where we talk about routing between UCM and CME. On the GK trunk you should UNCHECK the checkbox ³Use Device Pool Calling Party Transformation CSS². With this checked the Calling Party Transformation CSS set on the Device Pool is being used and this expands 5XXX to 3945XXX. You need this checked on the other gateways (PSTN) but not the GK trunk. As a favor- can you include the Question # you are working on from the WB and it will help me when I¹m hunting for the appropriate configuration:-) Thanks. -- Vik Malhi CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com http://vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Voice Guy learn.vo...@gmail.com http://learn.vo...@gmail.com Date: Tue, 7 Jul 2009 21:20:56 +0800 To: OSL Group ccie_voice@onlinestudylist.com http://ccie_voice@onlinestudylist.com Cc: Vik Malhi vma...@ipexpert.com http://vma...@ipexpert.com Subject: Lab 5A - BR2 - Help Hi Vik, I really appreciate your help in clarifying the following questions: On page 269 of the Proctor Guide it says add the hq-sip device to the RG rg-hq. Q1. I cannot call BR2-3xxx phones ( HQ can still call BR1 phones) , if I do not include the device gk-trunk Why is it that gk-trunk is not included ? I finally got the following tasks right : HQ Phone calling 911- PSTN with a 7 digit calling number and name, br1 phone calling 911 with a 10 digit calling number and name. Q2. When HQ calls BR2 , HQ phone is showing up as a 7 digit (3945001) instead of a 4 digit DN. HQ calling BR1 will show as a 4 digit DN. I have a RP 3XXX and all other RPs as RP--rl-local-gw---Standard Local Route Group (rg-br1,rg-hq) In the case of BR2, there is no requirement for any transformations, so it should show up as local 4 digit DN. ( In Lab 4A -Br2 - 3XXX was pointing to the gk-trunk) ' use calling Party external phone number mask' is unchecked and no route partition on the RP configuration. Even if I do otherwise it will still show up as a 7 digit instead of just 5001. I can't figure out what I am missing.
Re: [OSL | CCIE_Voice] Meeting Place Express in Vmware
I have tried it once, but with no success. BUT: In my CUCM7 NFR package, there is a Meeting Place Express 2.0.2 VMWare Demo DVD, so I think somehow it should be possible. Von: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] Im Auftrag von Ravindra Lakpriya Gesendet: Mittwoch, 08. Juli 2009 08:13 An: OSL Group Betreff: [OSL | CCIE_Voice] Meeting Place Express in Vmware Greetings Guys, Is it possible to install Meeting place express in vmware ? I have tried it but no luck. Thanks in advance. -- Ravindra Lakpriya +94 773 532 094 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 10A BW Calculations
Otto, I got your point. We have applied the logic to the LLQ but have not the same logic when provisioning RSVP bandwidth. As you say ip rsvp bandwidth 64 would be the correct answer. Thanks for your input. -- Vik Malhi CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Otto Sanchez otto.sanc...@daxa.com.ve Date: Tue, 7 Jul 2009 15:34:41 -0430 To: Vik Malhi vma...@ipexpert.com, OSL Group ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] Lab 10A BW Calculations Thanks for you answers Vik, 1.- As you mentioned, the bandwidth is hardcoded to 40 kbps (in a g729 call), but this is for the initial rsvp request, when the media is still not established yet between the endpoints (worst case call). Later, when this happens the reservation is adjusted to the current call characteristics, i.e. 24 kbps for a g729 20ms call (L3 BW), the remaining 16 kpbs would be available for other calls, I we use 40 Kbps per call for every call in the rsvp reservation command, we could be allowing extra calls in our calculations. For example, 4 g729 calls x 40 Kbps = 160 Kbps, in this case rsvp would allow more than 4 simultaneous calls, if we again consider that an established call uses only 24kbps, I think this is the reason the srnd recommends to make the calculation considering only the Nth call as the worst case, the other N-1 calls can be calculated as normal L3 calls, BR, Otto From: Vik Malhi [mailto:vma...@ipexpert.com] Sent: Martes, 07 de Julio de 2009 12:24 p.m. To: Otto Sanchez; OSL Group Subject: Re: [OSL | CCIE_Voice] Lab 10A BW Calculations 1.- For task 10.1, we must allow two calls between hq and br1 using rsvp, however, the rsvp profile max sessions software is set to 4 calls, is there any reason not to use 2 in this field?. vik: Yes you can set max sessions set to 2 in the MTP- however the MTP could also be used as an MTP not associated with RSVP call agent so it might be wise to either increase your max sessions within the MTP or put the MTP into a separate MRG that is bottom of the list within the MRGL. In other words- only use the MTP for RSVP CAC. Later In the same task the ip rsvp bandwidth is set to 80 kbps in the Serial interface. According to the srnd we should reserve (N-1 x L3 Call BW)+ (1 Worst Case Call L3 BW), so that if we¹re using g729 codec that would be: 1 x 24 kbps (20 ms or whatever the default packet size is in ucm) + 40 kbps (10 ms call) = 64 Kbps. Although I think the 80kbps calculation fits well when you have very few calls (in this case you could have both ringing at the same time), does not scale well when you have a larger number of calls as you might be reserving extra bandwidth, so I would have used 64kbps here. vik: the amount of bandwidth requested is hardcoded to 40kbps for a g729 call irrespective of what is actually used. 2.- In the task 10.4, to provision the llq priority queue the value configured is (2 x L2 Call BW) + (1 Worst case L3 Call) or 2 x 26.8 kbps + 40 kbps = 93.6 kbps rounded up to 94 kbps. Aren¹t we considering three calls here?. I agree that srnd recommends to over provision the llq when using rsvp, but I think this is being considered when we add the worst case scenario call (40 kbps), in consequence my calculation here would be 26.8 Kbps (1 L2 call) + 40 Kbps (worst case call) = 66.8 Kbps rounded to 67 Kbps for the priority command, vik: Good find! We configured 3 calls in the LLQ whereas it should have been 2. -- Vik Malhi CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Otto Sanchez otto.sanc...@daxa.com.ve Date: Tue, 7 Jul 2009 06:56:46 -0430 To: OSL Group ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Lab 10A BW Calculations Hi List, After finishing lab 10A and taking a look at its proctor guide, a couple of doubts have come into my mind, regarding the way the bandwidth values are being calculated for rsvp there, so I hope you can give me some guidance: 1.- For task 10.1, we must allow two calls between hq and br1 using rsvp, however, the rsvp profile max sessions software is set to 4 calls, is there any reason not to use
Re: [OSL | CCIE_Voice] Module 3a - SIP registration
If we only ever had local phones register to the CME we would never need the authenticate register command since the CME authenticates the MAC address of the SIP phone by comparing the result of an ARP request. IF you have remote phones the above process cannot be used as an authentication mechanism (wiki ARP to find out why:-) and therefore we use a built-in procedure within the SIP protocol for authentication. This is called the SIP Digest Authentication mechanism. The user/passwd are sent to the phone in a cnf file (encrypted passwd) and during the registration process the user/passwd stored in the phone cnf file is compared with the credentials within the voice register pool. The downside is that if you specify ³authenticate register² globally ALL phones must use the SIP Digest Authentication mechanism. You can¹t have some phones use the ARP procedure and some phones use the SIP procedure. Therefore if you specify authenticate register in voice register global then every Voice Register Pool will need a user/passwd. You have correctly identified (along with others) that all voice register pool¹s must contain a username/password If you ever see the error ³no contact info for pool x² it means the phone has not registered. You must use the ³show voice register dial-peer² command to verify registration of a SIP phone. If you do not see any dial-peers created for the SIP phones then use debug voice register events and debug ccsip messages for more info. With the SIP mechanism you should see the initial register get rejected (401 Unauthorized) and then the SIP phone RE-REGISTER (Register in response to the 401Unauth) except this time it registers with the credentials. -- Vik Malhi CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Nara Shikamaru shikam...@kagadis.com Date: Tue, 7 Jul 2009 22:55:24 -0700 To: OSL Group ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Module 3a - SIP registration Hello, I'm having trouble with a couple of parts of the SIP phone registration part of module 3. When the module was first released, I noticed that there was confusion over the syntax authenticate register as the voice register pool x sections in the PG don't mention the use of a username/password. Others is OSL have mentioned it the same confusion, am wondering if there's been an explanation in the context of the exercise. Most people resolve the issue by not adding the authenticate register syntax or specifying a username/password. Has IPexpert mentioned the reason for this? Also, my bigger problem is that my 7960 SIP phone can't be reset under voice register global. When I try to after creating the profile, I get errors saying No contact info available for pool 1. No contact info available for pool 2. Does anyone know what causes this? I've tried googling it, but to no avail. -- -Shikamaru ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Open Ended Quizzer
Hi Bill Download the free Adobe Air SDK from the following link to play that file:- http://www.adobe.com/products/air/tools/ajax/ http://www.adobe.com/products/air/tools/ajax/HTH - Basant On Wed, Jul 8, 2009 at 11:42 AM, Bill Hatcher wchatc...@gmail.com wrote: I am sure this has been asked before, but can someone tell me what program to use in order to open the .air file from IP Expert to open ended quizzer? I downloaded the Voice-Open-Ended-Quizzer.air file, but can not get it to work. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Meeting Place Express in Vmware
It is possible to install MeetingPlace Express 2.1.1.2 in VMWare without any issues. I just have to define it as a type Red Hat Enterprise Linux 3 (32-Bit), SCSI HD of 50 GB, 2GB RAM, and 2 NICs. I believe I have also installed from the shipping version of MPX which is included in the CUCM7 NFR and then upgraded to 2.1.1.2 and did not have any problems. You will be warned that the platform is unsupported once you get to the GUI portion of the install, but unlike previous versions, it does not only offer you the option to quit but to proceed anyway. Earl Hough CCIE #16508 (RS/Security) From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of GRAFL Philipp Sent: Wednesday, July 08, 2009 3:09 AM To: Ravindra Lakpriya; OSL Group Subject: Re: [OSL | CCIE_Voice] Meeting Place Express in Vmware I have tried it once, but with no success. BUT: In my CUCM7 NFR package, there is a Meeting Place Express 2.0.2 VMWare Demo DVD, so I think somehow it should be possible. Von: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] Im Auftrag von Ravindra Lakpriya Gesendet: Mittwoch, 08. Juli 2009 08:13 An: OSL Group Betreff: [OSL | CCIE_Voice] Meeting Place Express in Vmware Greetings Guys, Is it possible to install Meeting place express in vmware ? I have tried it but no luck. Thanks in advance. -- Ravindra Lakpriya +94 773 532 094 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The information contained in this transmission is confidential. It is intended solely for the use of the individual(s) or organization(s) to whom it is addressed. Any disclosure, copying or further distribution is not permitted unless such privilege is explicitly granted in writing by SARCOM, Inc. Furthermore, SARCOM, Inc. is not responsible for the proper and complete transmission of the substance of this communication, nor for any delay in its receipt. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Meeting Place Express in Vmware
Thanks EarlI ll be getting my NFR kit on next week. then i ll check. thanks again. On Wed, Jul 8, 2009 at 3:42 PM, Hough, Earl earl.ho...@sarcom.com wrote: It is possible to install MeetingPlace Express 2.1.1.2 in VMWare without any issues. I just have to define it as a type “Red Hat Enterprise Linux 3 (32-Bit)”, SCSI HD of 50 GB, 2GB RAM, and 2 NICs. I believe I have also installed from the shipping version of MPX which is included in the CUCM7 NFR and then upgraded to 2.1.1.2 and did not have any problems. You will be warned that the platform is unsupported once you get to the GUI portion of the install, but unlike previous versions, it does not only offer you the option to “quit” but to “proceed anyway”. *Earl Hough* CCIE #16508 (RS/Security) *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *GRAFL Philipp *Sent:* Wednesday, July 08, 2009 3:09 AM *To:* Ravindra Lakpriya; OSL Group *Subject:* Re: [OSL | CCIE_Voice] Meeting Place Express in Vmware I have tried it once, but with no success. BUT: In my CUCM7 NFR package, there is a Meeting Place Express 2.0.2 VMWare Demo DVD, so I think somehow it should be possible. *Von:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *Im Auftrag von *Ravindra Lakpriya *Gesendet:* Mittwoch, 08. Juli 2009 08:13 *An:* OSL Group *Betreff:* [OSL | CCIE_Voice] Meeting Place Express in Vmware Greetings Guys, Is it possible to install Meeting place express in vmware ? I have tried it but no luck. Thanks in advance. -- Ravindra Lakpriya +94 773 532 094 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The information contained in this transmission is confidential. It is intended solely for the use of the individual(s) or organization(s) to whom it is addressed. Any disclosure, copying or further distribution is not permitted unless such privilege is explicitly granted in writing by SARCOM, Inc. Furthermore, SARCOM, Inc. is not responsible for the proper and complete transmission of the substance of this communication, nor for any delay in its receipt. -- Ravindra Lakpriya +94 773 532 094 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Open Ended Quizzer
Thank you!!! That is a big help. On Wed, Jul 8, 2009 at 12:47 PM, basant yadav basant.ya...@gmail.comwrote: Hi Bill Download the free Adobe Air SDK from the following link to play that file:- http://www.adobe.com/products/air/tools/ajax/ http://www.adobe.com/products/air/tools/ajax/HTH - Basant On Wed, Jul 8, 2009 at 11:42 AM, Bill Hatcher wchatc...@gmail.comwrote: I am sure this has been asked before, but can someone tell me what program to use in order to open the .air file from IP Expert to open ended quizzer? I downloaded the Voice-Open-Ended-Quizzer.air file, but can not get it to work. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] CCIE VOICE LAB DESIGN ON VMWARE
Hello to all guys, This is my first post so please be patience with me because I’m going to ask a lot at once. First in my company we have bought some good staffs for our lab in order to build our list for the Advanced Unified Communication Specialization and also to build a CCIE Voice Lab for me (this my second attempt) and a colleague of me. We have bought 1x MCS-7825-H3-CCX1 (*HW Only MCS-7825-H3 with 2GB RAM and Two 160GB SATA HD)* and 2x MCS-7835-H2-CCX2 *(**HW Only MCS-7835-H2 with 2GB RAM and Two 146GB SAS HD)* our plans are to install VMware in order to install on those 2 MCS platforms the following servers 2x CUCM 7.X, 1xUCCX 7.X, 1xCUC 7.X, 1xCUPS 7.X. After a lot of search on net with have conclude to the following results. 1st We have to install VMware GSX or ESXi. Which of the two is much more suitable? 2nd If we choose to install GSX, do we have to install Win OS 2003 Server only on MCS platforms or it is more appropriate to install linux? 3rd For it’s virtual machine which we are going to create we have to configure 1024 Mbit ram so when we will run a full 8 hours scaleable lab which required all the five virtual servers to be up and running our going to have some performance issues or we are OK? If we are going to have some performance issues do we have to do some hardware upgrade such as us ram,HD on MCS platforms? Any advice to those questions guys will be useful. Also keep in mind that we do not have a lot experience on VMware. Best Regards Anestis Koukis ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Open Ended Quizzer
Im still having problems after downoading the SDK kit.It tries to open the quiz with adobe reader, any tips? Thanks Kamran 2009/7/8 ccie_voice-requ...@onlinestudylist.com Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. Open Ended Quizzer (Bill Hatcher) 2. Re: Open Ended Quizzer (basant yadav) 3. Re: Meeting Place Express in Vmware (Hough, Earl) 4. Re: Meeting Place Express in Vmware (Ravindra Lakpriya) 5. Re: Open Ended Quizzer (Bill Hatcher) -- Message: 1 Date: Wed, 8 Jul 2009 12:42:38 +0300 From: Bill Hatcher wchatc...@gmail.com Subject: [OSL | CCIE_Voice] Open Ended Quizzer To: ccie_voice@onlinestudylist.com Message-ID: e1756d520907080242j77891c3dj4438e039654ca...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 I am sure this has been asked before, but can someone tell me what program to use in order to open the .air file from IP Expert to open ended quizzer? I downloaded the Voice-Open-Ended-Quizzer.air file, but can not get it to work. -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090708/54e528d8/attachment-0001.htm -- Message: 2 Date: Wed, 8 Jul 2009 11:47:53 +0200 From: basant yadav basant.ya...@gmail.com Subject: Re: [OSL | CCIE_Voice] Open Ended Quizzer To: Bill Hatcher wchatc...@gmail.com Cc: ccie_voice@onlinestudylist.com Message-ID: 4a2451a70907080247m3888da0bq62c902930e564...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 Hi Bill Download the free Adobe Air SDK from the following link to play that file:- http://www.adobe.com/products/air/tools/ajax/ http://www.adobe.com/products/air/tools/ajax/HTH - Basant On Wed, Jul 8, 2009 at 11:42 AM, Bill Hatcher wchatc...@gmail.com wrote: I am sure this has been asked before, but can someone tell me what program to use in order to open the .air file from IP Expert to open ended quizzer? I downloaded the Voice-Open-Ended-Quizzer.air file, but can not get it to work. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090708/33e04c42/attachment-0001.htm -- Message: 3 Date: Wed, 8 Jul 2009 06:12:02 -0400 From: Hough, Earl earl.ho...@sarcom.com Subject: Re: [OSL | CCIE_Voice] Meeting Place Express in Vmware To: GRAFL Philipp philipp.gr...@nextiraone.at, Ravindra Lakpriya lakpr...@gmail.com, OSL Group ccie_voice@onlinestudylist.com Message-ID: aa08291c0ab3ea47984c37b34b74513d19f86...@vexch01.sarcom.sarcom.net Content-Type: text/plain; charset=us-ascii It is possible to install MeetingPlace Express 2.1.1.2 in VMWare without any issues. I just have to define it as a type Red Hat Enterprise Linux 3 (32-Bit), SCSI HD of 50 GB, 2GB RAM, and 2 NICs. I believe I have also installed from the shipping version of MPX which is included in the CUCM7 NFR and then upgraded to 2.1.1.2 and did not have any problems. You will be warned that the platform is unsupported once you get to the GUI portion of the install, but unlike previous versions, it does not only offer you the option to quit but to proceed anyway. Earl Hough CCIE #16508 (RS/Security) From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of GRAFL Philipp Sent: Wednesday, July 08, 2009 3:09 AM To: Ravindra Lakpriya; OSL Group Subject: Re: [OSL | CCIE_Voice] Meeting Place Express in Vmware I have tried it once, but with no success. BUT: In my CUCM7 NFR package, there is a Meeting Place Express 2.0.2 VMWare Demo DVD, so I think somehow it should be possible. Von: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] Im Auftrag von Ravindra Lakpriya Gesendet: Mittwoch, 08. Juli 2009 08:13 An: OSL Group Betreff: [OSL | CCIE_Voice] Meeting Place Express in Vmware Greetings Guys, Is it possible to install Meeting place express in vmware ? I have tried it but no luck. Thanks in advance. -- Ravindra Lakpriya +94 773 532 094
Re: [OSL | CCIE_Voice] CUCM7.0 Beta Version Service not getting started
Thanks Basant! Upgrading the RAM to 4GB for server work for me. But i did it once, now set server back to 2GB working fine now:) Deepak. From: basant yadav basant.ya...@gmail.com To: Deepak sidana sidana_dee...@yahoo..com Cc: ccievoice ccie_voice@onlinestudylist.com Sent: Tuesday, 7 July, 2009 11:29:47 PM Subject: Re: [OSL | CCIE_Voice] CUCM7.0 Beta Version Service not getting started Hi Deepak Pls check if you have Software feature license or not. Without this license, Call Manager service won't start. HTH - Basant On Tue, Jul 7, 2009 at 7:34 PM, Deepak sidana sidana_dee...@yahoo.com wrote: Hi Guys, I have installed the CUCM7.0 Beta version,on VMware with 2GB RAM 65GB of HDD. I am trying to start callmanager or any other service, after a long delay its return with error start failed Its having 3 Node License 150 Device Liecenes. I have tried to start services with IE8.0 Safari too, but no luck. Thanks in advance for your replies.. Deepak See the Web's breaking stories, chosen by people like you. Check out Yahoo! Buzz. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Send free SMS to your Friends on Mobile from your Yahoo! Messenger. Download Now! http://messenger.yahoo.com/download.php___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Meeting Place Express in Vmware
I just recently as of about a week ago, installed MPX 2.1.1.2 on VMware; Interesting you say it worked when you specified a SCSI Drive, as it required me to give it an IDE drive before it was able to begin partition setup. After that, I ran into some other issues which will prevent MPX from initiating X installation, you'll need to boot the MPX system into single user mode, which can be accomplished by modifying the kernel string at boot. When grub (the bootloader) shows up after you first turn the machine on, hit 'e', scroll down to the second line (should start with 'kernel'), hit 'e' or enter, i forget which at this moment again and it will allow you to modify the boot string. simply type in 'single' at the end, hit enter, hit 'b' which will boot the system and you will be given root access. At this point, you can install vmware tools and generate a good X configuration file with the command, 'X -configure' and copy the resulting file to /etc/X11. After which, when I booted I was still prompted to login, however because the actual MPX applicaiton hadn't installed, neither root or mpxadmin had been given passwords. So, while in as single user, run the adduser command 'adduser -G root,wheel foobar' and give it a password with 'pwd foobar'. Then you can proceed to login to the graphical interface, start the install and you're off and good to go. If there is a better way, then awesome, but this is the procedure I had to go through. I plan on doing a write up shortly and will post it here when it's done. If you have any questions feel free to let me know! On Wed, Jul 8, 2009 at 3:51 AM, Ravindra Lakpriya lakpr...@gmail.comwrote: Thanks EarlI ll be getting my NFR kit on next week. then i ll check. thanks again. On Wed, Jul 8, 2009 at 3:42 PM, Hough, Earl earl.ho...@sarcom.com wrote: It is possible to install MeetingPlace Express 2.1.1.2 in VMWare without any issues. I just have to define it as a type “Red Hat Enterprise Linux 3 (32-Bit)”, SCSI HD of 50 GB, 2GB RAM, and 2 NICs. I believe I have also installed from the shipping version of MPX which is included in the CUCM7 NFR and then upgraded to 2.1.1.2 and did not have any problems. You will be warned that the platform is unsupported once you get to the GUI portion of the install, but unlike previous versions, it does not only offer you the option to “quit” but to “proceed anyway”. *Earl Hough* CCIE #16508 (RS/Security) *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *GRAFL Philipp *Sent:* Wednesday, July 08, 2009 3:09 AM *To:* Ravindra Lakpriya; OSL Group *Subject:* Re: [OSL | CCIE_Voice] Meeting Place Express in Vmware I have tried it once, but with no success. BUT: In my CUCM7 NFR package, there is a Meeting Place Express 2.0.2 VMWare Demo DVD, so I think somehow it should be possible. *Von:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *Im Auftrag von *Ravindra Lakpriya *Gesendet:* Mittwoch, 08. Juli 2009 08:13 *An:* OSL Group *Betreff:* [OSL | CCIE_Voice] Meeting Place Express in Vmware Greetings Guys, Is it possible to install Meeting place express in vmware ? I have tried it but no luck. Thanks in advance. -- Ravindra Lakpriya +94 773 532 094 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The information contained in this transmission is confidential. It is intended solely for the use of the individual(s) or organization(s) to whom it is addressed. Any disclosure, copying or further distribution is not permitted unless such privilege is explicitly granted in writing by SARCOM, Inc. Furthermore, SARCOM, Inc. is not responsible for the proper and complete transmission of the substance of this communication, nor for any delay in its receipt. -- Ravindra Lakpriya +94 773 532 094 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Meeting Place Express in Vmware
Just out of curiosity, what flavor of VMware did you install this on? For me, it was with ESX 3.5 Update 4. Earl Hough CCIE #16508 (RS/Security) From: Tanner Ezell [mailto:tanner.ez...@gmail.com] Sent: Wednesday, July 08, 2009 10:00 AM To: Ravindra Lakpriya Cc: Hough, Earl; OSL Group; GRAFL Philipp Subject: Re: [OSL | CCIE_Voice] Meeting Place Express in Vmware I just recently as of about a week ago, installed MPX 2.1.1.2 on VMware; Interesting you say it worked when you specified a SCSI Drive, as it required me to give it an IDE drive before it was able to begin partition setup. After that, I ran into some other issues which will prevent MPX from initiating X installation, you'll need to boot the MPX system into single user mode, which can be accomplished by modifying the kernel string at boot. When grub (the bootloader) shows up after you first turn the machine on, hit 'e', scroll down to the second line (should start with 'kernel'), hit 'e' or enter, i forget which at this moment again and it will allow you to modify the boot string. simply type in 'single' at the end, hit enter, hit 'b' which will boot the system and you will be given root access. At this point, you can install vmware tools and generate a good X configuration file with the command, 'X -configure' and copy the resulting file to /etc/X11. After which, when I booted I was still prompted to login, however because the actual MPX applicaiton hadn't installed, neither root or mpxadmin had been given passwords. So, while in as single user, run the adduser command 'adduser -G root,wheel foobar' and give it a password with 'pwd foobar'. Then you can proceed to login to the graphical interface, start the install and you're off and good to go. If there is a better way, then awesome, but this is the procedure I had to go through. I plan on doing a write up shortly and will post it here when it's done. If you have any questions feel free to let me know! On Wed, Jul 8, 2009 at 3:51 AM, Ravindra Lakpriya lakpr...@gmail.com wrote: Thanks EarlI ll be getting my NFR kit on next week. then i ll check. thanks again. On Wed, Jul 8, 2009 at 3:42 PM, Hough, Earl earl.ho...@sarcom.com wrote: It is possible to install MeetingPlace Express 2.1.1.2 in VMWare without any issues. I just have to define it as a type Red Hat Enterprise Linux 3 (32-Bit), SCSI HD of 50 GB, 2GB RAM, and 2 NICs. I believe I have also installed from the shipping version of MPX which is included in the CUCM7 NFR and then upgraded to 2.1.1.2 and did not have any problems. You will be warned that the platform is unsupported once you get to the GUI portion of the install, but unlike previous versions, it does not only offer you the option to quit but to proceed anyway. Earl Hough CCIE #16508 (RS/Security) From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of GRAFL Philipp Sent: Wednesday, July 08, 2009 3:09 AM To: Ravindra Lakpriya; OSL Group Subject: Re: [OSL | CCIE_Voice] Meeting Place Express in Vmware I have tried it once, but with no success. BUT: In my CUCM7 NFR package, there is a Meeting Place Express 2.0.2 VMWare Demo DVD, so I think somehow it should be possible. Von: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] Im Auftrag von Ravindra Lakpriya Gesendet: Mittwoch, 08. Juli 2009 08:13 An: OSL Group Betreff: [OSL | CCIE_Voice] Meeting Place Express in Vmware Greetings Guys, Is it possible to install Meeting place express in vmware ? I have tried it but no luck. Thanks in advance. -- Ravindra Lakpriya +94 773 532 094 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The information contained in this transmission is confidential. It is intended solely for the use of the individual(s) or organization(s) to whom it is addressed. Any disclosure, copying or further distribution is not permitted unless such privilege is explicitly granted in writing by SARCOM, Inc. Furthermore, SARCOM, Inc. is not responsible for the proper and complete transmission of the substance of this communication, nor for any delay in its receipt. -- Ravindra Lakpriya +94 773 532 094 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The information contained in this transmission is confidential. It is intended solely for the use of the individual(s) or organization(s) to whom it is addressed. Any disclosure, copying or further distribution is not permitted unless such privilege is explicitly granted in writing by SARCOM, Inc. Furthermore, SARCOM, Inc. is not responsible for the proper and complete transmission of the substance of this communication, nor for any delay in its receipt. ___ For more information
[OSL | CCIE_Voice] CM to GK BRQ behavior
I'm seeing something strange in making calls from CM to CME via GK. I've enabled the BRQ service parameter in CM. I've included bandwidth total default 16 in my gk config and did a shut/no shut When I make calls from CM to CME the deb h225 asn1 shows (I think) that 128k is being requested. Am I missing something obivous here ? Currently all my calls get rejected from the GK and go via the HQ GW. If I remove the bandwidth command from the Gatekeeper config, the call works using g729. - Scott ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] CM to GK BRQ behavior
I found it.The DP assigned to the trunk was in HQ so CM was trying to do g711. I didn't have voice class codec configured on the CME so I'm assuming the call setup went through to the GK as g711 and got changed to g729 when CM started talking to CME. On Wed, Jul 8, 2009 at 4:03 PM, Scott ODonnell scott.odonn...@gmail.comwrote: I'm seeing something strange in making calls from CM to CME via GK. I've enabled the BRQ service parameter in CM. I've included bandwidth total default 16 in my gk config and did a shut/no shut When I make calls from CM to CME the deb h225 asn1 shows (I think) that 128k is being requested. Am I missing something obivous here ? Currently all my calls get rejected from the GK and go via the HQ GW. If I remove the bandwidth command from the Gatekeeper config, the call works using g729. - Scott ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] trace file in CCM 7
hi, I set the trace setting like in Lab 4B, then make a call, but I do not see it update the trace file (I do not find the trace for my call) any idea ? thks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] UCCX white scren
Hello I have UCCX version 5 installed on a server and I upgraded it to version 7.0.1. Now I can not get into the web admin page when I go to my server http://myIP/appadmin then I enter Administrator/ciscocisco it takes me to http://172.16.2.248/appadmin/j_security_check and the page is a blank white page. has anyne seen this? and when I try to uninstall UCCX the remove button is grayed out. J. Hogan MCP,CCDA,CCDP, CCNA, CCNP, CCSP, CCAI Yahoo ID: jhogan552000 AIM ID: jhogan55 MSN ID: jhogan55 ICQ ID: 257599283 Live Life And Do Not Kill Time. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] UCCX white scren
Are you using IE, and also, you may try going back to the Appadmin page after the j_security_check as it may update to show you logged in. Try restarting IIS if that fails. On Wed, Jul 8, 2009 at 7:08 PM, J Hogan j.jho...@gmail.com wrote: Hello I have UCCX version 5 installed on a server and I upgraded it to version 7.0.1. Now I can not get into the web admin page when I go to my server http://myIP/appadmin then I enter Administrator/ciscocisco it takes me to http://172.16.2.248/appadmin/j_security_check and the page is a blank white page. has anyne seen this? and when I try to uninstall UCCX the remove button is grayed out. J. Hogan MCP,CCDA,CCDP, CCNA, CCNP, CCSP, CCAI Yahoo ID: jhogan552000 AIM ID: jhogan55 MSN ID: jhogan55 ICQ ID: 257599283 Live Life And Do Not Kill Time. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] UCCX white scren
Thanks Tanner I have tried IE and firefox and the same for boht. I restarted IIS and still the same white screen On Wed, Jul 8, 2009 at 9:12 PM, Tanner Ezell tanner.ez...@gmail.com wrote: Are you using IE, and also, you may try going back to the Appadmin page after the j_security_check as it may update to show you logged in. Try restarting IIS if that fails. On Wed, Jul 8, 2009 at 7:08 PM, J Hogan j.jho...@gmail.com wrote: Hello I have UCCX version 5 installed on a server and I upgraded it to version 7.0.1. Now I can not get into the web admin page when I go to my server http://myIP/appadmin then I enter Administrator/ciscocisco it takes me to http://172.16.2.248/appadmin/j_security_check and the page is a blank white page. has anyne seen this? and when I try to uninstall UCCX the remove button is grayed out. J. Hogan MCP,CCDA,CCDP, CCNA, CCNP, CCSP, CCAI Yahoo ID: jhogan552000 AIM ID: jhogan55 MSN ID: jhogan55 ICQ ID: 257599283 Live Life And Do Not Kill Time. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- J. Hogan MCP,CCDA,CCDP, CCNA, CCNP, CCSP, CCAI Yahoo ID: jhogan552000 AIM ID: jhogan55 MSN ID: jhogan55 ICQ ID: 257599283 Live Life And Do Not Kill Time. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com