[OSL | CCIE_Voice] upgrading firmware of hardware phones

[amr gaber]

Hi ALL,
  I try to conect some hardware IP Phones through EZ PVN , but each
session When they try to connect CUCM they start Upgrading firmware and take
too too long time.
Please advice
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] CUCM DB Replication Issues

[CCIETalk.com]

You shouldn't have to reboot.
Turn services off on the broken server
Remove from the group
Run repair all
Turn on the services
Add it to the group

Is this the order you tried?

On 5/16/10, Matthew Berry  wrote:
> Can someone explain this to me?
>
> Below is my output from "show dbreplcation status" after I issued a
> "utils dbreplication repair all" and reboot the Pub then Sub.
>
> I always though a status of 3 meant replication was broken, but the
> explanation below says that no errors or mismatches were found.
>
> This seems off to me.
>
> ==
>
>
> Please use "file view activelog
> cm/trace/dbl/sdi/ReplicationStatus.2010_05_17_02_02_43.out " command to
> see the output
> admin:file view activelog
> cm/trace/dbl/sdi/ReplicationStatus.2010_05_17_02_02_43.out
>
> SERVER ID STATESTATUS QUEUE  CONNECTION CHANGED
> ---
> g_ucmpub_ccm7_0_1_11000_22 Active   Local   0
> g_ucmsub_ccm7_0_1_11000_23 Active   Connected   0 May 17 01:56:20
>
> -
>
>
> No Errors or Mismatches found.
> Replication status is good on all available servers.
>
> --
>
> *Matthew Berry*
>
> /A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written/
>
> *_Vitals:_*
>
> *GVoice: *+1.612.424.5044
>
> *Gmail*: ciscovoiceg...@gmail.com
>
> *Skype*: ciscovoiceguru
>
> *Twitter*: ciscovoiceguru
>
> *_Cert Stats:_*
>
> Cisco Cert Journey Began: Jan 1, 2009
>
> 1st Lab Attempt: Aug 16, 2010
>
>

-- 
Sent from my mobile device

www.ccietalk.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] CUCM DB Replication Issues

[Matthew Berry]

Can someone explain this to me?

Below is my output from "show dbreplcation status" after I issued a 
"utils dbreplication repair all" and reboot the Pub then Sub.


I always though a status of 3 meant replication was broken, but the 
explanation below says that no errors or mismatches were found.


This seems off to me.

==


Please use "file view activelog 
cm/trace/dbl/sdi/ReplicationStatus.2010_05_17_02_02_43.out " command to 
see the output
admin:file view activelog 
cm/trace/dbl/sdi/ReplicationStatus.2010_05_17_02_02_43.out


SERVER ID STATESTATUS QUEUE  CONNECTION CHANGED
---
g_ucmpub_ccm7_0_1_11000_22 Active   Local   0
g_ucmsub_ccm7_0_1_11000_23 Active   Connected   0 May 17 01:56:20

-


No Errors or Mismatches found.
Replication status is good on all available servers.

--

*Matthew Berry*

/A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written/

*_Vitals:_*

*GVoice: *+1.612.424.5044

*Gmail*: ciscovoiceg...@gmail.com

*Skype*: ciscovoiceguru

*Twitter*: ciscovoiceguru

*_Cert Stats:_*

Cisco Cert Journey Began: Jan 1, 2009

1st Lab Attempt: Aug 16, 2010

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Vol2 lab 7- question about clid_authen_collect

[akash patel]

I am looking through proctor guide for the solution of tasks 7.2 (fac through 
CME tcl script).  Is there a good document/link which explain this as there is 
one for b-acd?

I appreciate any feedback.___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Lab 5.2 wb1

[Randall Crumm]

Thanks Roger.
That may have been the case. I just deleted it and started over. It is working 
now.


I'll keep that in mind.

Thanks again

Randall



From: Roger Henderson [mailto:rhender...@gmail.com]
Sent: Sunday, May 16, 2010 4:17 PM
To: Randall Crumm
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Lab 5.2 wb1

Is there an RP pointing directly at the BR1(MGCP) gateway? Check the dependency 
records for the gateway if you aren't sure.

Roger

On Mon, May 17, 2010 at 8:23 AM, Randall Crumm 
mailto:randall.cr...@harmonicinc.com>> wrote:
Hi,
I am trying to create a RG for BR1(MGCP) and it is not available in the list of 
available devices.

I see it is registered in ccm
The show ccm-manager look correct


Any thoughts?


___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Lab 5.2 wb1

[Roger Henderson]

Is there an RP pointing directly at the BR1(MGCP) gateway? Check the
dependency records for the gateway if you aren't sure.

Roger

On Mon, May 17, 2010 at 8:23 AM, Randall Crumm <
randall.cr...@harmonicinc.com> wrote:

> Hi,
> I am trying to create a RG for BR1(MGCP) and it is not available in the
> list of available devices.
>
> I see it is registered in ccm
> The show ccm-manager look correct
>
>
> Any thoughts?
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Lab 5.2 wb1

[Randall Crumm]

Hi,
I am trying to create a RG for BR1(MGCP) and it is not available in the list of 
available devices.

I see it is registered in ccm
The show ccm-manager look correct


Any thoughts?


___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Dial Plan Testing Strategy ?

[Mike Brooks]

What is everyones thoughts on testing dialplan ?

If you have multiple paths for calls such backup gateways, or teho with
backups etc, would it make sense to get through dialplan and then just test
at the end.  Or test as you go, both the primary and backup path after
implementing each route pattern ?  Testing as you go would involve shutting
down the voice-port on the gateways after each pattern is implemented and
verifying it works before moving on to the next bullet/task.

Just curious what you all feel is the best approach.

Thx,
Mike
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Xxxx

[Akash]

Akash Patel
Presales Consultant


___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Physical Components for CCIE Voice Lab

[CCIETalk.com]

rack rentals are the cheaper way to go. You can always find them on eBay

On Sun, May 16, 2010 at 3:56 PM, Paul Dardinski wrote:

>  Agreed. You can also use a 3640 with cheap cards for pstn
> --
> Paul Dardinski - via Blackberry
>
> --
>  *From*: ccie_voice-boun...@onlinestudylist.com <
> ccie_voice-boun...@onlinestudylist.com>
> *To*: amuno...@hotmail.com ; osl osl <
> ccie_voice@onlinestudylist.com>
> *Sent*: Sun May 16 10:41:54 2010
> *Subject*: Re: [OSL | CCIE_Voice] Physical Components for CCIE Voice Lab
>
> Hi:
>
> 4 gateways: 2801 for hq, 2801 for br1, 2811 for br2 (you need a *NM* cue
> or 2801 with AIM CUE), 2811 for pstn + wic cards + t1/e1 cards + pvdms + cue
> + hwic-4esw + 3750 + 5-6 ip phones + cables
>
> Plus a quad core with 8/16 gb mem
>
> hth
>
> --
> From: amuno...@hotmail.com
> To: ccie_voice@onlinestudylist.com
> Date: Sat, 15 May 2010 14:28:49 -0500
> Subject: [OSL | CCIE_Voice] Physical Components for CCIE Voice Lab
>
>  Hello,
>
>
>
> I am recently passed the CCIE Voice Written, then I am so excited for going
> on with the CCIE Voice Lab. The question that I have for yours, what
> physical components such as router should I buy for preparing for the Lab???
>
>
>
> I have thought  in buying the following:
>
>
>
> · router C2901-CME-SRST/K9, included Unity Express base release
> 8.0
>
> · Two ip phones 7942G
>
> · Server for virtualization of CUCM (Pub + Sub), UC, UCCX, UPS,
> WinXP for IP Communicator.
>
>
>
> What could you suggest me for preparing for the Lab??when I feel that I
> am ready, I will take a bootcamp with IPExpert.
>
>
>
> I would appreciate your help and experience in this case, I want to start
> well since the beginning.
>
>
>
> Best regards,
>
>
>
> Alexis Munoz
> CCNP, CCVP, PMP
>
>
>
>
>
> --
> Hotmail: Powerful Free email with security by Microsoft. Get it 
> now.
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>


-- 
www.ccietalk.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Vol1 Lab 4A - X-Lite Issues

[Steve Denney (stdenney)]

Hi Brian,

I had run out of time on that lab, but some replies I got afterwards suggested 
that the most likely culprit was a codec mismatch. Check the codec settings 
between the regions, and the codec that the X-Lite client is set to use, and 
set up a transcoder if need be. 

Also ensure that any SIP dial peers are using a hard-coded codec and not "voice 
class codec" to set a codec preference - although it looks fine and won't give 
you an error message, the dial peer apparently won't actually use the voice 
class codec settings, so you may have a mismatch that isn't obvious.

cheers, sd


Steve Denney, CISSP
Systems Engineer - Technology Solutions Network
Voice and Unified Communications Products
Cisco Systems, Inc.
125 High Street, 21st Floor
Boston, MA  02110
978-936-4048 (Office)
617-872-5031 (Mobile)
stden...@cisco.com 
 

-Original Message-
From: Brian Valentine [mailto:bkvalent...@gmail.com] 
Sent: Saturday, May 15, 2010 9:40 PM
To: Steve Denney (stdenney)
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Vol1 Lab 4A - X-Lite Issues

Steve,

I'm hitting this tonight.  Ever figure it out?

Thanks,

Brian

On Thu, Feb 4, 2010 at 4:24 PM, Steve Denney (stdenney)
 wrote:
> Hitting an interesting problem and just wondering if anyone else has seen
> similar symptoms...
>
>
>
> Working on Vol1, Lab 4A, Task 4.5.
>
> This is the task where you set up a SIP Route Pattern and use SIP URI
> dialing to dial the X-Lite CME SIP Phone (BR2 Ph 4, DN 3006) from the CIPC
> SIP Phone (HQ Ph2, DN 5002).
>
>
>
> When dialing from 5002 to 3006 (using the corporate directory on CIPC, as
> shown in the lab), the X-Lite rings, but hangs up immediately after the call
> is answered.
>
> The output of debug ccsip mess is attached. Looks like the X-Lite is sending
> a SIP BYE message with the description of "Illegal Sdp Negotiation".
>
>
>
> I tried a call in the other direction as well - direct dial from 3006 to
> 5002. The CIPC rings, but you cannot actually answer the call.
>
> The debug in this case shows a "503 Service Unavailable" message, and the
> display on the X-Lite says "Call failed: Service Unavailable".
>
>
>
> I've double and triple checked all configs (including allow-connections sip
> to sip), reloaded all routers, Googled for similar issues, and am now
> officially stumped. :)
>
> Debugs attached. Any ideas?
>
>
>
> cheers, steve
>
>
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Physical Components for CCIE Voice Lab

[Paul Dardinski]

Agreed. You can also use a 3640 with cheap cards for pstn 
-- 
Paul Dardinski - via Blackberry 




From: ccie_voice-boun...@onlinestudylist.com 
 
To: amuno...@hotmail.com ; osl osl 
 
Sent: Sun May 16 10:41:54 2010
Subject: Re: [OSL | CCIE_Voice] Physical Components for CCIE Voice Lab 


Hi:
 
4 gateways: 2801 for hq, 2801 for br1, 2811 for br2 (you need a NM cue or 2801 
with AIM CUE), 2811 for pstn + wic cards + t1/e1 cards + pvdms + cue + 
hwic-4esw + 3750 + 5-6 ip phones + cables 

Plus a quad core with 8/16 gb mem 
 
hth
 



From: amuno...@hotmail.com
To: ccie_voice@onlinestudylist.com
Date: Sat, 15 May 2010 14:28:49 -0500
Subject: [OSL | CCIE_Voice] Physical Components for CCIE Voice Lab



Hello, 

 

I am recently passed the CCIE Voice Written, then I am so excited for going on 
with the CCIE Voice Lab. The question that I have for yours, what physical 
components such as router should I buy for preparing for the Lab???

 

I have thought  in buying the following:

 

· router C2901-CME-SRST/K9, included Unity Express base release 8.0

· Two ip phones 7942G

· Server for virtualization of CUCM (Pub + Sub), UC, UCCX, UPS, WinXP 
for IP Communicator.  

 

What could you suggest me for preparing for the Lab??when I feel that I am 
ready, I will take a bootcamp with IPExpert. 

 

I would appreciate your help and experience in this case, I want to start well 
since the beginning. 

 

Best regards,

 

Alexis Munoz
CCNP, CCVP, PMP

 

 




Hotmail: Powerful Free email with security by Microsoft. Get it now. 
 
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Fwd: Proctorlabs UCCX Image - Pre Integration - DISREGARD

[Mike Brooks]

figured it out..please disregard...thx..mike

-- Forwarded message --
From: Mike Brooks <2xcci...@gmail.com>
Date: Sun, May 16, 2010 at 2:12 PM
Subject: Proctorlabs UCCX Image - Pre Integration ?
To: OSL Group 
Cc: supp...@proctorlabs.com, 2xcci...@gmail.com


It seems that every version of the  UCCX-PUB I load in proctorlabs, already
has an existing configuration.  Which lab to I have to load for just the
UCCX server so I can practice the integration portion ?

Thanks,
Mike
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Proctorlabs UCCX Image - Pre Integration ?

[Mike Brooks]

It seems that every version of the  UCCX-PUB I load in proctorlabs, already
has an existing configuration.  Which lab to I have to load for just the
UCCX server so I can practice the integration portion ?

Thanks,
Mike
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Invoking CUC Call Handler Transfer Rules (Matthew Hall)

[Matthew Hall]

My previous post was way too complex.  Lets just focus on this.  How do I 
invoke the call handler transfer rules?  What I want to do is dial an 
extension, say 2401, that belongs to a call handler in CUC.  Then have that 
call handler's transfer rules invoked to forward the call, say to a PSTN 
number, 911 for an example.


Thanks
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] 3 digit and 4 digit same cluster different site route plan

[Alan Gardner]

Hi all,

I have two sites off of the same cluster, using 1 + {three digit Site Code}.

Put the two different sites in different Partitions because one site uses 3 
digit extensions and the other uses 4 digit extension with overlapping numbers.

Is there a way to put a translation to strip off the site code and then search 
only a specific set of partitions.

The link below talk about added the site code to every extension and then using 
a translation pattern to strip it off, but I think that there has to be an 
easier way.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/dialplan.html#wp1150549

Thanks

Alan

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] HW Conf Bridge Problem on Lab7 Vol1

[Angel Perez]

Hi:

 

Try to set unlimet bandwith from/to this location if this works check the 
following¨

 

http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg16570.html

 

hth
 
> Date: Sun, 16 May 2010 00:20:08 +0100
> From: naoufal.kerbo...@cbi.ma
> To: ccie_voice@onlinestudylist.com
> Subject: [OSL | CCIE_Voice] HW Conf Bridge Problem on Lab7 Vol1
> 
> Hi,
> 
> I'm working on lab 7 Vol 1 question 7.3 and ran into an issue with BR1.
> 
> BR1 Conf bridge is registred to CUCM (No problem) and add it to MRGL to 
> BR1 DP.
> 
> scenario:
> 
> HQ-Phone2 > BR1Phone2 > CONF-TO > PSTN
> 
> If I try to join the conference call from HQ Phone dropped and get on 
> BR1 phone screen "Cannot complete conference" and call to pstn still.
> My BR1 config:
> 
> sccp local Vlan240
> sccp ccm 10.10.210.10 identifier 2 version 5.0.1
> sccp ccm 10.10.210.11 identifier 1 version 5.0.1
> sccp
> !
> sccp ccm group 1
> bind interface Vlan240
> associate ccm 1 priority 1
> associate ccm 2 priority 2
> associate profile 3 register br1Conf
> !
> dspfarm profile 3 conference
> codec g711ulaw
> codec g711alaw
> codec g729ar8
> codec g729abr8
> codec g729r8
> codec g729br8
> maximum sessions 3
> associate application SCCP
> 
> 
> Any Ideas?
> 
> 
> Regards
> 
> Naoufal
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
  
_
Hotmail: Powerful Free email with security by Microsoft.
https://signup.live.com/signup.aspx?id=60969___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Physical Components for CCIE Voice Lab

[Angel Perez]

Hi:

 

4 gateways: 2801 for hq, 2801 for br1, 2811 for br2 (you need a NM cue or 2801 
with AIM CUE), 2811 for pstn + wic cards + t1/e1 cards + pvdms + cue + 
hwic-4esw + 3750 + 5-6 ip phones + cables 

Plus a quad core with 8/16 gb mem 

 

hth
 


From: amuno...@hotmail.com
To: ccie_voice@onlinestudylist.com
Date: Sat, 15 May 2010 14:28:49 -0500
Subject: [OSL | CCIE_Voice] Physical Components for CCIE Voice Lab





Hello, 
 
I am recently passed the CCIE Voice Written, then I am so excited for going on 
with the CCIE Voice Lab. The question that I have for yours, what physical 
components such as router should I buy for preparing for the Lab???
 
I have thought  in buying the following:
 
· router C2901-CME-SRST/K9, included Unity Express base release 8.0
· Two ip phones 7942G
· Server for virtualization of CUCM (Pub + Sub), UC, UCCX, UPS, WinXP 
for IP Communicator.  
 
What could you suggest me for preparing for the Lab??when I feel that I am 
ready, I will take a bootcamp with IPExpert. 
 
I would appreciate your help and experience in this case, I want to start well 
since the beginning. 
 
Best regards,
 
Alexis Munoz
CCNP, CCVP, PMP
 
  
_
Hotmail: Powerful Free email with security by Microsoft.
https://signup.live.com/signup.aspx?id=60969___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Physical Components for CCIE Voice Lab

[Graham Hopkins]

Well there are so many options, you can work with the online rack rentals from 
Proctorlabs which are designed to work with the IP Expert workbooks. I don't 
use them myself,  but other here can tell you how they got on with them, or you 
can build your own lab as you suggest.

If building your own lab then I'd take a look at the areas from  the lab 
blueprint that you think you need to  focus on and get some kit to help you do 
that. 2800 series routers are fine and less expensive than the 2900 series, 
You'll need more than one if you want to practice things such as WAN QoS and 
CAC mechanisms, simulating E1/T1 circuits with crossover cables, call routing 
with SRST and CUCME etc.  You'll need some DSPs installed for transcoding and 
other hardware media resources.

For some areas dynamips is a handy tool, hang some phones off  USB-to-Ethernet 
Interfaces and you can easily build a multi-router network to test all the 
various gateways, gatekeepers, directory gatekeepers, CUBE, B-ACD, Frame Relay 
QoS etc. sure there are some limitations to consider - such as no DSP resources 
for transcoding, but you can do a lot and its easy to clone scenarios and wipe 
and reboot the routers (much faster than the real thing).

7942 phones are fine but the 7961/61/65 phones give you more buttons which 
allow you to do more on a single phone.


Regards

Graham Hopkins



On 15 May 2010, at 20:28,   wrote:

> Hello,
>  
> I am recently passed the CCIE Voice Written, then I am so excited for going 
> on with the CCIE Voice Lab. The question that I have for yours, what physical 
> components such as router should I buy for preparing for the Lab???
>  
> I have thought  in buying the following:
>  
> · router C2901-CME-SRST/K9, included Unity Express base release 8.0
> · Two ip phones 7942G
> · Server for virtualization of CUCM (Pub + Sub), UC, UCCX, UPS, WinXP 
> for IP Communicator.  
>  
> What could you suggest me for preparing for the Lab??when I feel that I 
> am ready, I will take a bootcamp with IPExpert.
>  
> I would appreciate your help and experience in this case, I want to start 
> well since the beginning.
>  
> Best regards,
>  
> Alexis Munoz
> CCNP, CCVP, PMP
>  
>  
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Invoking CUC Call Handler Transfer Rules

[Matthew Hall]

I used to know ho to invoke these, rather than having the call go to greeting.  
They are normally invoked when you transfer from the AA I thought. 

 I created a call handler with an extension 2401. 

 I set the alternate transfer rule to enabled, set it to no greeting and to 
forward to an extension (2001) with a direct release to switch.

When I enter the AA I dial 2401, and it tells me to wait while it transfers, 
and proceeds to give me the greeting and go into the mail box of 2401.

My goal is to do this:

Dial 2401, have 2401 transfer directly to 2001.  

So essentially I need to first find out why the AA isn't getting to the 
transfer rule, then find out how to invoke the transfer rule without the aa.

Thanks




___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com