[OSL | CCIE_Voice] New voice labs look awesome/ study group
Hi I just downloaded the new five pack of labs, well just three. And they look real good I have had several people repo ding to for a group. If you at really interested let me know. I plan obfocusing on the new labs If you have responded I'll email you early next week. If you are looking for To get into a group let ne know Randall I have had several people email me back about a study group. I Sent from my iPhone ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Voice Gateway and Signaling
Hi everybody, If a question asked you to configure the voice gateways as the following: use T1 Framing: ESF, line coding :B8ZS isdn sw: primary-ni take clocking for layer 1 from network side your pri circuit layer 2 should be user side for me the answer will be the following configuration: isdn switch-type primary-ni network-clock-participate wic 1 network-clock-select 1 T1 0/1/0 controller T1 0/1/0 cablelength long 0db pri-group timeslots 1-4,24 service mgcp ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! Is there anything wrong in my config?? Please if somebody know any trick in this section please help me.___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Call Routing
Hi all, I have very strange problem, and I need someone to help me to understand why? I am trying to study call routing, local calls I have the following setup SCCP Phone RP Local RL H.323 GW PSTN in the GW I added the following dial-peer: dial-peer voice 15 pots translation-profile outgoing loc destination-pattern ^9[2-9]..$ port 0/1/0:23 while the dial-peer is pots so the 9 should be stripped and remaining will be send to pstn but the call is not working unless I added forward-digits 7 anybody can help me to understand why?? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Called-party Transformation Patterns
Hi, I want to understand called party transformation patterns. Please provide a good link. IPX workbooks explains well calling party transformation patterns , translation patterns , route patterns , etc.. but not the above one. As per cisco system guide , called party transformation patterns are non-routable (similar to calling party transformation patterns). Is this for the number shown in caller's phone ( To ) while the remote destination is ringing? Does CUCM ignore the transformations done by called party transformation patterns when matching against route patterns to route the call? Ken ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Extension Mobility
I came across something in the dependency records for Phones, End users that sometimes it says Extension Mobility and sometimes Extension Mobility Dynamic. Dont know what is the difference between them I am under the impression that if a single user login to multiple phones at various times then it becomes EMD otherwise it says the simple EM if the end user has logged in to only one phone using his profile?? any thoughts!!! Thanks -- Abbaseo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] New voice labs look awesome/ study group
Sorry I have had several people reply they are interested to form a group. If you at really interested let me know. I plan on focusing on these new labs. I have looked over the first few labs and they are updated and introduce some new tasks. Just to clarify, these are the 5 new labs Vik just wrote up. If you have responded I'll email you early next week. If you are looking for To get into a group let ne know Thanks Randall Sent from my iPhone On Oct 20, 2011, at 11:02 PM, Rrcrumm rrcr...@yahoo.com wrote: Hi I just downloaded the new five pack of labs, well just three. And they look real good I have had several people repo ding to for a group. If you at really interested let me know. I plan obfocusing on the new labs If you have responded I'll email you early next week. If you are looking for To get into a group let ne know Randall I have had several people email me back about a study group. I Sent from my iPhone ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Voice Gateway and Signaling
I think you are correct. /Robert Von: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] Im Auftrag von Ccie Voice Gesendet: Freitag, 21. Oktober 2011 12:01 An: CCIE Study Betreff: [OSL | CCIE_Voice] Voice Gateway and Signaling Hi everybody, If a question asked you to configure the voice gateways as the following: use T1 Framing: ESF, line coding :B8ZS isdn sw: primary-ni take clocking for layer 1 from network side your pri circuit layer 2 should be user side for me the answer will be the following configuration: isdn switch-type primary-ni network-clock-participate wic 1 network-clock-select 1 T1 0/1/0 controller T1 0/1/0 cablelength long 0db pri-group timeslots 1-4,24 service mgcp ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! Is there anything wrong in my config?? Please if somebody know any trick in this section please help me. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] IP Expert mock labs
Hi all, I have my own lab with 2811's, HWIC4s, 7961 phones and VMWARE for all UC servers. In my RS days I had my own gear and could load up labs with no issues. My question is will I be able to load up mock labs on my routers and UC servers? If so how? I'm sure the router configs are text files, but are the CM configs tar files? Bulk imports? How do I can the base configs into CM, Unity Cx , Presence and UCCX? Thanks, Mike CCIE #17982m (RS) ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Call Routing
If you use an anchored regex ^ it may not consider the 9 as explicitly matched digit. What happens if you use 9[2-9]..$ ? On 21 Oct 2011, at 18:59, Ccie Voice v.c...@yahoo.com wrote: Hi all, I have very strange problem, and I need someone to help me to understand why? I am trying to study call routing, local calls I have the following setup SCCP Phone RP Local RL H.323 GW PSTN in the GW I added the following dial-peer: dial-peer voice 15 pots translation-profile outgoing loc destination-pattern ^9[2-9]..$ port 0/1/0:23 while the dial-peer is pots so the 9 should be stripped and remaining will be send to pstn but the call is not working unless I added forward-digits 7 anybody can help me to understand why?? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Automated Reply Re: CCIE_Voice Digest, Vol 68, Issue 149
This is an automated reply to your message CCIE_Voice Digest, Vol 68, Issue 149 sent to stewart.mcfarl...@provista-uk.com. Dear ccie_voice-requ...@onlinestudylist.com Thank you for your email. Please note that due to unforseen circumstances I will be out of the office for the rest of this week (w/c 17/10/11). If you require any assistance please contact the provista office on 08456424642. For technical assistance please contact serviced...@provista-uk.com. Thanks Stewart ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Called-party Transformation Patterns
Hi Ken, What is means is unlike Translation pattern there will not be a lookup done against the routing table for the outcome of called/calling party transformation. Hope that answers your question. Thanks Regards, Raees Shaikh From: Ken Wyan kew...@gmail.com To: ccie_voice@onlinestudylist.com Sent: Friday, October 21, 2011 5:15 PM Subject: [OSL | CCIE_Voice] Called-party Transformation Patterns Hi, I want to understand called party transformation patterns. Please provide a good link. IPX workbooks explains well calling party transformation patterns , translation patterns , route patterns , etc.. but not the above one. As per cisco system guide , called party transformation patterns are non-routable (similar to calling party transformation patterns). Is this for the number shown in caller's phone ( To ) while the remote destination is ringing? Does CUCM ignore the transformations done by called party transformation patterns when matching against route patterns to route the call? Ken ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Call Routing
Hi What digits are going when you dont add forward digits 7? Regards, Raees From: Ccie Voice v.c...@yahoo.com To: CCIE Study ccie_voice@onlinestudylist.com Sent: Friday, October 21, 2011 4:29 PM Subject: [OSL | CCIE_Voice] Call Routing Hi all, I have very strange problem, and I need someone to help me to understand why? I am trying to study call routing, local calls I have the following setup SCCP Phone RP Local RL H.323 GW PSTN in the GW I added the following dial-peer: dial-peer voice 15 pots translation-profile outgoing loc destination-pattern ^9[2-9]..$ port 0/1/0:23 while the dial-peer is pots so the 9 should be stripped and remaining will be send to pstn but the call is not working unless I added forward-digits 7 anybody can help me to understand why?? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] cue-cme mwi unsolicited question
Hi Vic, how is it going?, about mwi unsolicited. sip-ua mwi.. unsolicited telephony-ser mwi relay ephone-dn nothing works mwi if subscribe notify sip-ua mwi... telephony-ser nothing ephone-dn mwi sip both works fine what if make mistake if on unsolicited include on ephone-dn mwi sip, that work too.is wrong do this? thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] what mode of ephone-dn is best for extension list on ephone-hunt? for only one call at time on extension
what is better option when working extension on ephone-hunt? ephone-dn 1 octo huntstop channel 1 or ephone-dn (not dual neither octo) thanks and regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] IP Expert mock labs
Text files for routers. VMWare snapshots for servers. From: Mike mik...@msn.com Date: Fri, 21 Oct 2011 09:53:18 -0400 To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] IP Expert mock labs Hi all, I have my own lab with 2811¹s, HWIC4s, 7961 phones and VMWARE for all UC servers. In my RS days I had my own gear and could load up labs with no issues. My question is will I be able to load up mock labs on my routers and UC servers? If so how? I¹m sure the router configs are text files, but are the CM configs tar files? Bulk imports? How do I can the base configs into CM, Unity Cx , Presence and UCCX? Thanks, Mike CCIE #17982m (RS) ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Call Routing
Hi all and thank you to answer my question, but still I am not able to solve it without forward digits command: I tried to remove ^ but when I removed it and tried to make calls I hear dial-tone from PSTN router. And regarding : The gateway/dial-peer takes the [2-9] as a pattern match, also and strips them. If it is like this why when I used debug isdn q931 on pstn router I found no called party number ?? if it is considering [2-9] as a pattern match then I should find in pstn that the remaining as called number. Am I right? Regards, From: Raees Shaikh racerra...@yahoo.com To: Ccie Voice v.c...@yahoo.com; CCIE Study ccie_voice@onlinestudylist.com Sent: Friday, October 21, 2011 6:21 PM Subject: Re: [OSL | CCIE_Voice] Call Routing Hi What digits are going when you dont add forward digits 7? Regards, Raees From: Ccie Voice v.c...@yahoo.com To: CCIE Study ccie_voice@onlinestudylist.com Sent: Friday, October 21, 2011 4:29 PM Subject: [OSL | CCIE_Voice] Call Routing Hi all, I have very strange problem, and I need someone to help me to understand why? I am trying to study call routing, local calls I have the following setup SCCP Phone RP Local RL H.323 GW PSTN in the GW I added the following dial-peer: dial-peer voice 15 pots translation-profile outgoing loc destination-pattern ^9[2-9]..$ port 0/1/0:23 while the dial-peer is pots so the 9 should be stripped and remaining will be send to pstn but the call is not working unless I added forward-digits 7 anybody can help me to understand why?? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Voice Gateway and Signaling
Thank you but I do not think I am correct :) From: Robert Schuknecht rschukne...@gmx.de To: 'Ccie Voice' v.c...@yahoo.com; 'CCIE Study' ccie_voice@onlinestudylist.com Sent: Friday, October 21, 2011 4:50 PM Subject: AW: [OSL | CCIE_Voice] Voice Gateway and Signaling I think you are correct. /Robert Von:ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] Im Auftrag von Ccie Voice Gesendet: Freitag, 21. Oktober 2011 12:01 An: CCIE Study Betreff: [OSL | CCIE_Voice] Voice Gateway and Signaling Hi everybody, If a question asked you to configure the voice gateways as the following: use T1 Framing: ESF, line coding :B8ZS isdn sw: primary-ni take clocking for layer 1 from network side your pri circuit layer 2 should be user side for me the answer will be the following configuration: isdn switch-type primary-ni network-clock-participate wic 1 network-clock-select 1 T1 0/1/0 controller T1 0/1/0 cablelength long 0db pri-group timeslots 1-4,24 service mgcp ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! Is there anything wrong in my config?? Please if somebody know any trick in this section please help me.___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] IP Expert mock labs
There are no base configs for CUCM (and UCXN, UCCX, etc.) per se. It's mostly just server hostnames IP addresses, plus some basic simple integration in the case of UCXN and UCCX. Your best bet for a home lab is to get the various application servers to a usable starting point - OS/App installed and IP addresses assigned, etc and then take a VMware snapshot to use as a starting point for all labs. -matthew On Fri, Oct 21, 2011 at 9:53 AM, Mike mik...@msn.com wrote: Hi all, ** ** I have my own lab with 2811’s, HWIC4s, 7961 phones and VMWARE for all UC servers. In my RS days I had my own gear and could load up labs with no issues. ** ** My question is will I be able to load up mock labs on my routers and UC servers? If so how? I’m sure the router configs are text files, but are the CM configs tar files? Bulk imports? How do I can the base configs into CM, Unity Cx , Presence and UCCX? ** ** ** ** Thanks, Mike CCIE #17982m (RS) ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Voice Gateway and Signaling
The cable length command is not overly important in a lab.. but the config looks good Sh ccm-manager - should see active call manager here Sh isdn status - layer two up - MULTIPLE_FRAME_ESTABLISHED HTH D From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Ccie Voice Sent: 21 October 2011 20:03 To: Robert Schuknecht; 'CCIE Study' Subject: Re: [OSL | CCIE_Voice] Voice Gateway and Signaling Thank you but I do not think I am correct :) _ From: Robert Schuknecht rschukne...@gmx.de To: 'Ccie Voice' v.c...@yahoo.com; 'CCIE Study' ccie_voice@onlinestudylist.com Sent: Friday, October 21, 2011 4:50 PM Subject: AW: [OSL | CCIE_Voice] Voice Gateway and Signaling I think you are correct. /Robert Von: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] Im Auftrag von Ccie Voice Gesendet: Freitag, 21. Oktober 2011 12:01 An: CCIE Study Betreff: [OSL | CCIE_Voice] Voice Gateway and Signaling Hi everybody, If a question asked you to configure the voice gateways as the following: use T1 Framing: ESF, line coding :B8ZS isdn sw: primary-ni take clocking for layer 1 from network side your pri circuit layer 2 should be user side for me the answer will be the following configuration: isdn switch-type primary-ni network-clock-participate wic 1 network-clock-select 1 T1 0/1/0 controller T1 0/1/0 cablelength long 0db pri-group timeslots 1-4,24 service mgcp ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! Is there anything wrong in my config?? Please if somebody know any trick in this section please help me. _ No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.1831 / Virus Database: 2092/4565 - Release Date: 10/21/11 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] cue-cme mwi unsolicited question
Hello Zamuel , the mwi relay command is only needed in case of the subscribe notify MWI and its not needed in case of using Unsolicited because it does send the event to the phone using NOTIFY message no matter it subscribed to the MWI server Or not . Ash On Fri, Oct 21, 2011 at 11:21 AM, zamuel del Toro sdelto...@hotmail.com wrote: Hi Vic, how is it going?, about mwi unsolicited. sip-ua mwi.. unsolicited telephony-ser mwi relay ephone-dn nothing works mwi if subscribe notify sip-ua mwi... telephony-ser nothing ephone-dn mwi sip both works fine what if make mistake if on unsolicited include on ephone-dn mwi sip, that work too. is wrong do this? thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] cue-cme mwi unsolicited question
hi - this is an excellent summary of mwi for cue that is worth a read http://blog.ipexpert.com/2010/07/19/sip-mwi-mechansims-on-cue-notify/ Sent from my iPad On 21 Oct 2011, at 21:23, Ashraf Ayyash ash.ayy...@gmail.com wrote: Hello Zamuel , the mwi relay command is only needed in case of the subscribe notify MWI and its not needed in case of using Unsolicited because it does send the event to the phone using NOTIFY message no matter it subscribed to the MWI server Or not . Ash On Fri, Oct 21, 2011 at 11:21 AM, zamuel del Toro sdelto...@hotmail.com wrote: Hi Vic, how is it going?, about mwi unsolicited. sip-ua mwi.. unsolicited telephony-ser mwi relay ephone-dn nothing works mwi if subscribe notify sip-ua mwi... telephony-ser nothing ephone-dn mwi sip both works fine what if make mistake if on unsolicited include on ephone-dn mwi sip, that work too.is wrong do this? thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
