[OSL | CCIE_Voice] QoS question from new 5 labs, lab 2, question 10.1
Hello, From the new 5 labs, Lab 2 question 10.1 it asks the following. For traffic being sent to the Site A gateway ensure that traffic marked with COS 5 is dropped if queue 1 is 75% full. The solution guide says to add queue-set 2 to the fastethernet port and change the following 2 line like so. mls qos queue-set output 2 threshold 1 75 100 100 100 mls qos srr-queue output cos-map queue 1 threshold 3 5 the 2nd line looks like a typo. It should be the following for putting COS 5 into q1t1, correct? mls qos srr-queue output cos-map queue 1 threshold 1 5 John ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] QoS question from new 5 labs, lab 2, question 10.1
Think the same, since 3rd threshold performs tail drop. Peter - Original Message - From: John McGaughey (jomcgaug) jomcg...@cisco.com Date: Friday, January 27, 2012 2:56 pm Subject: [OSL | CCIE_Voice] QoS question from new 5 labs, lab 2, question 10.1 To: ccie_voice@onlinestudylist.com Hello, From the new 5 labs, Lab 2 question 10.1 it asks the following. For traffic being sent to the Site A gateway ensure that traffic marked with COS 5 is dropped if queue 1 is 75% full. The solution guide says to add queue-set 2 to the fastethernet port and change the following 2 line like so. mls qos queue-set output 2 threshold 1 75 100 100 100 mls qos srr-queue output cos-map queue 1 threshold 3 5 the 2nd line looks like a typo. It should be the following for putting COS 5 into q1t1, correct? mls qos srr-queue output cos-map queue 1 threshold 1 5 John ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] QoS question from new 5 labs, lab 2, question 10.1
3rd threshold is 100% implicit. So that wouldn't work since it will drop when 100% full. -Original Message- From: Farkas Péter [mailto:wormh...@sch.bme.hu] Sent: Friday, January 27, 2012 8:04 AM To: John McGaughey (jomcgaug) Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] QoS question from new 5 labs, lab 2,question 10.1 Think the same, since 3rd threshold performs tail drop. Peter - Original Message - From: John McGaughey (jomcgaug) jomcg...@cisco.com Date: Friday, January 27, 2012 2:56 pm Subject: [OSL | CCIE_Voice] QoS question from new 5 labs, lab 2, question 10.1 To: ccie_voice@onlinestudylist.com Hello, From the new 5 labs, Lab 2 question 10.1 it asks the following. For traffic being sent to the Site A gateway ensure that traffic marked with COS 5 is dropped if queue 1 is 75% full. The solution guide says to add queue-set 2 to the fastethernet port and change the following 2 line like so. mls qos queue-set output 2 threshold 1 75 100 100 100 mls qos srr-queue output cos-map queue 1 threshold 3 5 the 2nd line looks like a typo. It should be the following for putting COS 5 into q1t1, correct? mls qos srr-queue output cos-map queue 1 threshold 1 5 John ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] QoS question from new 5 labs, lab 2, question 10.1
You are correct John. Also note that the interface would need to be set to use queue-set 2 because default is queue-set 1. Chris On Fri, Jan 27, 2012 at 7:31 AM, John McGaughey (jomcgaug) jomcg...@cisco.com wrote: Hello, ** ** From the new 5 labs, Lab 2 question 10.1 it asks the following. ** ** “For traffic being sent to the Site A gateway ensure that traffic marked with COS 5 is dropped if queue 1 is 75% full.” ** ** The solution guide says to add queue-set 2 to the fastethernet port and change the following 2 line like so. ** ** *mls qos queue-set output 2 threshold 1 75 100 100 100* *mls qos srr-queue output cos-map queue 1 threshold 3 5* ** ** the 2nd line looks like a typo. It should be the following for putting COS 5 into q1t1, correct? ** ** *mls qos srr-queue output cos-map queue 1 threshold 1 5* ** ** John ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] QoS question from new 5 labs, lab 2, question 10.1
I meant my opinion the same as your. - Original Message - From: John McGaughey (jomcgaug) jomcg...@cisco.com Date: Friday, January 27, 2012 3:05 pm Subject: RE: [OSL | CCIE_Voice] QoS question from new 5 labs, lab 2,question 10.1 To: wormh...@sch.hu Cc: ccie_voice@onlinestudylist.com 3rd threshold is 100% implicit. So that wouldn't work since it will drop when 100% full. -Original Message- From: Farkas Péter [ Sent: Friday, January 27, 2012 8:04 AM To: John McGaughey (jomcgaug) Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] QoS question from new 5 labs, lab 2,question 10.1 Think the same, since 3rd threshold performs tail drop. Peter - Original Message - From: John McGaughey (jomcgaug) jomcg...@cisco.com Date: Friday, January 27, 2012 2:56 pm Subject: [OSL | CCIE_Voice] QoS question from new 5 labs, lab 2, question 10.1 To: ccie_voice@onlinestudylist.com Hello, From the new 5 labs, Lab 2 question 10.1 it asks the following. For traffic being sent to the Site A gateway ensure that traffic marked with COS 5 is dropped if queue 1 is 75% full. The solution guide says to add queue-set 2 to the fastethernet port and change the following 2 line like so. mls qos queue-set output 2 threshold 1 75 100 100 100 mls qos srr-queue output cos-map queue 1 threshold 3 5 the 2nd line looks like a typo. It should be the following for putting COS 5 into q1t1, correct? mls qos srr-queue output cos-map queue 1 threshold 1 5 John ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Multicast for CUBE
It supports in media flow around mode. Regards, Mohammed Al Baqari Sent from my iPhone On Jan 27, 2012, at 3:32 PM, datucha123 datucha123 datucha...@gmail.com wrote: Hello, As I guess, the CUBE (H323/SIP) does not support Multicast MoH. Correct? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] UCCX App Admin Account Question
Question for the group re: UCCX When you install UCCX, You're asked to create an Application Administrator. You use this account to first login to the UCCX system to perform basic configuration. One of these steps is to select call maanger administrators that will be UCCX Administrators. Do you ever use this account again? Once you define call manager accounts as UCCX administrators, this Application Administrator account doesn't seem to work any longer. Is it still there? Can you change the password? When would you need this credential? Thanks guys! Josh ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX App Admin Account Question
Hi Josh, When the UCCX is integrated with the CM, it uses an active End user account to be the Application Administrator Account to login into AppAdmin page. When you run the Fresh Install setup for the first time, you use the Default username and password for running this setup. You would not use this username/ password again in normal operations. You'd always use the CM end user account for maintaining operations. There could be scenarios where you might need the Default username/ password in case you need to run this setup again for any reason. Once you run the initial setup and choose the user from the CM end user section, the setup completes. Once the setup completes, from that point onwards you only use the CM End user account you made the Admin. You can again use this username if you need to by setting the CCX system to Fresh Install mode again using the CET tool. You can access the CET tool from within the Windows Server: 1) Click Start Run 2) Type cet or cet.bat 3) A new window pops asking to click Yes/No. Always click NO. 4) Look for the tab on the left hand side of the window which goes by the name, com.cisco.crs.cluster.config.AppAdminSetupConfig. Highlight this tab and it would show either a single entry in case of a standalone setup/ multiple entries in case of an HA setup. 5) Choose the one for the Publisher. You can identify it by looking at the Key Value and it should be 1 for Publisher. Double click on it. 6) Go to the second tab on the new window which come on the screen. 7) Select, FRESH_INSTALL from the dropdown and click apply and OK. Now, launch the AppAdmin page again and you'd be able to use the Default username and password. Keep in mind, the settings which you put in place when you ran through the setup the first time would still be there. So, if you don't mean to change anything, keep clicking NEXT until the setup completes. Once it completes, close the page and once again you'd be able to use the CM End user account to login. HTH Regards Gurpreet On Fri, Jan 27, 2012 at 2:23 PM, Josh Kittle j...@ooglenetworks.com wrote: Question for the group re: UCCX When you install UCCX, You're asked to create an Application Administrator. You use this account to first login to the UCCX system to perform basic configuration. One of these steps is to select call maanger administrators that will be UCCX Administrators. Do you ever use this account again? Once you define call manager accounts as UCCX administrators, this Application Administrator account doesn't seem to work any longer. Is it still there? Can you change the password? When would you need this credential? Thanks guys! Josh ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
