Re: [OSL | CCIE_Voice] srst configuration for cbarge
I had some weirdness with the variant using auto-provision all (not auto-provision none as per the blog article) ! telephony-service srst mode auto-provision all ! In this case I expected CBarge and privacy-button to work out-of-the-box. (I have disabled single-button-barge on CUCM and configured the conference bridge to fallback to SRST) . In my testing this did not work: I had to bounce SRST mode, save the config (careful to reinput isdn bind-l3 ccm-manager), and reload the router. Now if the phones fall into SRST the ephone-template will take. Without the router reload the ephone-template seems to be ignored: i.e. privacy is on, privacy-button does not appear ephone-template 1 softkeys remote-in-use NewCall CBarge privacy off privacy-button Does it work for you folks immediately? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] isdn switch type
I want to configure a 2811 Router as a MGCP Gateway using CUCM GUI. I can't find isdn switch-type primary-net5 under CUCM GUI mgcp endpoint configuration page. which one is equivalent to primary-net5 available in IOS ? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] isdn switch type
Ken, try EURO. On 10 Apr 2012 13:31, Ken Wyan kew...@gmail.com wrote: I want to configure a 2811 Router as a MGCP Gateway using CUCM GUI. I can't find isdn switch-type primary-net5 under CUCM GUI mgcp endpoint configuration page. which one is equivalent to primary-net5 available in IOS ? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] isdn switch type
Under the product specific config layout on our MGCP config page, we use EURO for global isdn switch type for a primary-net 5 Sent from my iPhone On Apr 10, 2012, at 8:29 AM, Ken Wyan kew...@gmail.com wrote: I want to configure a 2811 Router as a MGCP Gateway using CUCM GUI. I can't find isdn switch-type primary-net5 under CUCM GUI mgcp endpoint configuration page. which one is equivalent to primary-net5 available in IOS ? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] isdn switch type
Euro Sent from my iPhone On Apr 10, 2012, at 5:29 AM, Ken Wyan kew...@gmail.com wrote: I want to configure a 2811 Router as a MGCP Gateway using CUCM GUI. I can't find isdn switch-type primary-net5 under CUCM GUI mgcp endpoint configuration page. which one is equivalent to primary-net5 available in IOS ? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] isdn switch type
Euro Sent from my iPhone Pls pardon my fat fingers. On 10 Apr, 2012, at 8:29 PM, Ken Wyan kew...@gmail.com wrote: I want to configure a 2811 Router as a MGCP Gateway using CUCM GUI. I can't find isdn switch-type primary-net5 under CUCM GUI mgcp endpoint configuration page. which one is equivalent to primary-net5 available in IOS ? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Changing NTP Timezone on UCM Pub for OS Admin ?
Hi Pavan, Set timezone number (show timezone list - also useful) On 10 Apr 2012 15:43, Pavan K pav.c...@gmail.com wrote: When looking at utils ntp status on UCM pub, i see the Timezone as CST. Is there a way to change the Timezone from Amer/Chicago to a diff Zone. I have Two Date/Time Groups configured on UCM are for EST PST. I dont have a CST Date/Time group configured on the box. === admin:utils ntp status ntpd (pid 17730) is running... remote refid st t when poll reach delay offset jitter == 127.127.1.0 LOCAL(0)10 l 54 64 3770.0000.000 0.001 *1.1.1.1 CHU_AUDIO(1) 2 u 701 1024 3772.1790.375 0.046 synchronised to NTP server (1.1.1.1) at stratum 3 time correct to within 41 ms polling server every 1024 s Current time in UTC is : Tue Apr 10 14:22:00 UTC 2012 *Current time in America/Chicago is : Tue Apr 10 09:22:00 CDT 201* === -- - Pavan ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] isdn switch type
Thanks all. I configured Euro it automatically configures primary-net5 in Router. Thanks. On Tue, Apr 10, 2012 at 6:09 PM, Ki Wi kiwi.vo...@gmail.com wrote: Euro Sent from my iPhone Pls pardon my fat fingers. On 10 Apr, 2012, at 8:29 PM, Ken Wyan kew...@gmail.com wrote: I want to configure a 2811 Router as a MGCP Gateway using CUCM GUI. I can't find isdn switch-type primary-net5 under CUCM GUI mgcp endpoint configuration page. which one is equivalent to primary-net5 available in IOS ? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] srst configuration for cbarge
I have always disabled privacy on the ephone and in the case of the privacy button- either template or ephone. And this works right away. Are you saying that disabling privacy on the ephone template without it being disabled on the ephone takes effect? Vik Malhi – CCIE #13890 Managing Partner - IPexpert, Inc. Telephone: +1.810.326.1444 ext 420 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com On Apr 10, 2012, at 2:27 AM, Anthony Alba wrote: I had some weirdness with the variant using auto-provision all (not auto-provision none as per the blog article) ! telephony-service srst mode auto-provision all ! In this case I expected CBarge and privacy-button to work out-of-the-box. (I have disabled single-button-barge on CUCM and configured the conference bridge to fallback to SRST) . In my testing this did not work: I had to bounce SRST mode, save the config (careful to reinput isdn bind-l3 ccm-manager), and reload the router. Now if the phones fall into SRST the ephone-template will take. Without the router reload the ephone-template seems to be ignored: i.e. privacy is on, privacy-button does not appear ephone-template 1 softkeys remote-in-use NewCall CBarge privacy off privacy-button Does it work for you folks immediately? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Changing NTP Timezone on UCM Pub for OS Admin ?
Thanks Baktha. That did it. -Pavan On Tue, Apr 10, 2012 at 10:56 AM, Baktha Muralidharan muralic...@gmail.comwrote: show timezone list set timezone but I don't think you need to worry about, as far as times displayed on the phones. DTGs will take care of that. thanks, /Baktha Message: 3 Date: Tue, 10 Apr 2012 09:39:42 -0500 From: Pavan K pav.c...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Changing NTP Timezone on UCM Pub for OS Admin ? Message-ID: CAJDPBuVfgGzp5HNtYMrcUXfZYJ53jZU7negpE2q--ztE=y0...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 When looking at utils ntp status on UCM pub, i see the Timezone as CST. Is there a way to change the Timezone from Amer/Chicago to a diff Zone. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- - Pavan ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CCIE voice lab Hardware list
Hi Guys, I am planning to set up IP Expert CCIE voice lab at home. Does anybody have the list of part numbers and there respective quantity I should be purchasing. Thank you very much for your assistance. Regards, Ashutosh___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] srst configuration for cbarge
I am testing no pre-configuration and auto-provision all, i.e., no ephones and ephone-dns. In telephony-service use no privacy In ephone-template use privacy-button When it falls into CME as SRST, the ephones show privacy: 1 and there is no privacy-button - seems like the privacy and privacy-button settings are ignored. I need to save the config, revert to CUCM, reload the router, then try SRST again. Now everything works. I'm using 12.4(22)T. On Tue, Apr 10, 2012 at 11:38 PM, Vik Malhi vma...@ipexpert.com wrote: I have always disabled privacy on the ephone and in the case of the privacy button- either template or ephone. And this works right away. Are you saying that disabling privacy on the ephone template without it being disabled on the ephone takes effect? Vik Malhi – CCIE #13890 Managing Partner - IPexpert, Inc. Telephone: +1.810.326.1444 ext 420 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com On Apr 10, 2012, at 2:27 AM, Anthony Alba wrote: I had some weirdness with the variant using auto-provision all (not auto-provision none as per the blog article) ! telephony-service srst mode auto-provision all ! In this case I expected CBarge and privacy-button to work out-of-the-box. (I have disabled single-button-barge on CUCM and configured the conference bridge to fallback to SRST) . In my testing this did not work: I had to bounce SRST mode, save the config (careful to reinput isdn bind-l3 ccm-manager), and reload the router. Now if the phones fall into SRST the ephone-template will take. Without the router reload the ephone-template seems to be ignored: i.e. privacy is on, privacy-button does not appear ephone-template 1 softkeys remote-in-use NewCall CBarge privacy off privacy-button Does it work for you folks immediately? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Cbarge in SRST
What you could do is let it fail to SRST mode - Telephone-service no privacy auto-provision-all srst dn line-mode octo srst ephone template 1 srst dn template 1 Let the ephone-dns and ephones self-create then modify the ephone-dn and ephones. If you don't modify the name and description in the ephone-dn they will be wrong and if you put the privacy-button in the ephone setup you won't have to worry about if it will show up or not. BTW I left out the ephone-dn 1 and ephone-dn 2 configs just using the ephone-dn 3 to show basic configs to update. Example: ephone-dn 3 Number 4003 Name SC Sharedline 4003 Description +85334044003 ephone 1 Privacy-button (adds the button) ephone-template 1 button 1:1 2:3 ephone-template 1 no privacy (makes sure privacy is turned off when by default user must turn it on) softkey remote-in-use CBarge NewCall ephone-dn-template 1 call-forward busy 4220 call-forward noan 4220 timeout 20 HTH Rick Long -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccie_voice-requ...@onlinestudylist.com Sent: Tuesday, April 10, 2012 12:00 PM To: ccie_voice@onlinestudylist.com Subject: CCIE_Voice Digest, Vol 74, Issue 33 Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. Re: Changing NTP Timezone on UCM Pub for OS Admin ? (Kevin Spicer) 2. Re: isdn switch type (Ken Wyan) 3. Re: srst configuration for cbarge (Vik Malhi) 4. Changing NTP Timezone on UCM Pub for OS Admin ? (Baktha Muralidharan) -- Message: 1 Date: Tue, 10 Apr 2012 15:56:44 +0100 From: Kevin Spicer ke...@kevinspicer.co.uk To: Pavan K pav.c...@gmail.com Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Changing NTP Timezone on UCM Pub for OS Admin ? Message-ID: caf2ggor7qchk6dqm_ydtm31vshrxzksehdjllvhg1+huelg...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 Hi Pavan, Set timezone number (show timezone list - also useful) On 10 Apr 2012 15:43, Pavan K pav.c...@gmail.com wrote: When looking at utils ntp status on UCM pub, i see the Timezone as CST. Is there a way to change the Timezone from Amer/Chicago to a diff Zone. I have Two Date/Time Groups configured on UCM are for EST PST. I dont have a CST Date/Time group configured on the box. === admin:utils ntp status ntpd (pid 17730) is running... remote refid st t when poll reach delay offset jitter == 127.127.1.0 LOCAL(0)10 l 54 64 3770.0000.000 0.001 *1.1.1.1 CHU_AUDIO(1) 2 u 701 1024 3772.1790.375 0.046 synchronised to NTP server (1.1.1.1) at stratum 3 time correct to within 41 ms polling server every 1024 s Current time in UTC is : Tue Apr 10 14:22:00 UTC 2012 *Current time in America/Chicago is : Tue Apr 10 09:22:00 CDT 201* === -- - Pavan ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20120410/2e5287ed/attachment-0001.html -- Message: 2 Date: Tue, 10 Apr 2012 21:00:19 +0530 From: Ken Wyan kew...@gmail.com To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] isdn switch type Message-ID: capbg9b+snmjq9ppnqr_vmhtdc1ciydxpnpkpa-0xojtdkqk...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 Thanks all. I configured Euro it automatically configures primary-net5 in Router. Thanks. On Tue, Apr 10, 2012 at 6:09 PM, Ki Wi kiwi.vo...@gmail.com wrote: Euro Sent from my iPhone Pls pardon my fat fingers. On 10 Apr, 2012, at 8:29 PM, Ken Wyan kew...@gmail.com wrote: I want to configure a 2811 Router as a MGCP Gateway using CUCM GUI. I can't find isdn switch-type primary-net5 under CUCM GUI mgcp endpoint configuration page. which one is equivalent to primary-net5 available in IOS ? Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you
Re: [OSL | CCIE_Voice] CCIE voice lab Hardware list
See attached for equipment list...{\rtf1\ansi\ansicpg1252\cocoartf1038\cocoasubrtf360
{\fonttbl\f0\fswiss\fcharset0 Helvetica;}
{\colortbl;\red255\green255\blue255;}
\margl1440\margr1440\vieww28300\viewh17040\viewkind0
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural
\f0\b\fs42 \cf0 SiteA-RTR\
\b0\fs24 \
\
\
SiteA-RTR#sh inv\
NAME: 2811 chassis, DESCR: 2811 chassis\
PID: CISCO2811 , VID: V04 , SN: FTX1123F0A0\
\
NAME: Two port T1 voice interface daughtercard on Slot 0 SubSlot 0, DESCR: Two port T1 voice interface daughtercard\
PID: VWIC-2MFT-T1 , VID: V01, SN: 35872259 \
\
NAME: PVDMII DSP SIMM with one DSP on Slot 0 SubSlot 4, DESCR: PVDMII DSP SIMM with one DSP\
PID: PVDM2-16 , VID: V01 , SN: FOC11194R17\
\
NAME: PVDMII DSP SIMM with one DSP on Slot 0 SubSlot 5, DESCR: PVDMII DSP SIMM with one DSP\
PID: PVDM2-16 , VID: V01 , SN: FOC124757GL\
\
\
\
\
SiteA-RTR#sh cdp n\
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge\
S - Switch, H - Host, I - IGMP, r - Repeater\
\
Device IDLocal Intrfce HoldtmeCapability Platform Port ID\
SiteB-RTR.proctorlabs.com\
Ser 0/0/1:0.1 149 R S I 2811 Ser 0/0/1:0.1\
SiteC-RTRSer 0/0/1:0.2 145 R S I 2811 Ser 0/1/0:0.1\
SiteA-Switch Fas 0/0153 R S I WS-C3750- Fas 1/0/1\
\
\
\
\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural
\b\fs42 \cf0 SiteA-Switch\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural
\b0\fs24 \cf0 \
SiteA-Switch#sh inv\
NAME: 1, DESCR: WS-C3750-24P\
PID: WS-C3750-24PS-S , VID: V06, SN: FDO1247Y0S9\
\
\
SiteA-Switch#sh cdp n\
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge\
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone\
\
Device IDLocal Intrfce HoldtmeCapability Platform Port ID\
CUC7-Pub Fas 1/0/4 159H none foun eth0\
SiteA-RTRFas 1/0/1 141 R S I 2811 Fas 0/0\
UCMPub Fas 1/0/4 136H none foun eth0\
UCMSub Fas 1/0/4 147H none foun eth0\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural
\cf0 SA-PH1-7962 Fas 1/0/2155 H P IP Phone Port 1\
SA-PH2-7962 Fas 1/0/3155 H P IP Phone Port 1\
PSTN-Phone-7960 Fas 1/0/22155 H P IP Phone Port 1\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural
\cf0 \
\
\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural
\b\fs42 \cf0 SiteB-RTR\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural
\b0\fs24 \cf0 \
SiteB-RTR#sh inv\
NAME: 2811 chassis, DESCR: 2811 chassis\
PID: CISCO2811 , VID: V04 , SN: FTX1123F0A3\
\
NAME: Two port T1 voice interface daughtercard on Slot 0 SubSlot 0, DESCR: Two port T1 voice interface daughtercard\
PID: VWIC-2MFT-T1 , VID: V01, SN: 35893701 \
\
NAME: PVDMII DSP SIMM with one DSP on Slot 0 SubSlot 4, DESCR: PVDMII DSP SIMM with one DSP\
PID: PVDM2-16 , VID: V01 , SN: FOC11194QQS\
\
NAME: PVDMII DSP SIMM with one DSP on Slot 0 SubSlot 5, DESCR: PVDMII DSP SIMM with one DSP\
PID: PVDM2-16 , VID: V01 , SN: FOC11194PVQ\
\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural
\cf0 NAME: 4 Port FE Switch on Slot 1 SubSlot 0, DESCR: 4 Port FE Switch\
PID: HWIC-4ESW , VID: V01 , SN: FOC12340M3R\
\
NAME: WIC/VIC/HWIC 3 Power Daughter Card, DESCR: 4-Port HWIC-ESW Power Daughter Card\
PID: ILPM-4, VID: V01 , SN: FOC12334ES5\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural
\cf0 \
\
SiteB-RTR#sh cdp n\
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge\
S - Switch, H - Host, I - IGMP, r - Repeater\
\
Device IDLocal Intrfce HoldtmeCapability Platform Port ID\
SiteA-RTRSer 0/0/1:0.1 140 R S I 2811 Ser 0/0/1:0.1\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural
\cf0 SB-PH1-7962 Fas 1/15 155 H IP Phone Port 1\
SB-PH2-7962 Fas 1/0163 H IP Phone Port 1\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural
\cf0 \
\
\
\
